![Sam Ravnborg](/assets/img/avatar_default.png)
Merge header files for m68k and m68knommu to the single location: arch/m68k/include/asm The majority of this patch was the result of the script that is included in the changelog below. The script was originally written by Arnd Bergman and exten by me to cover a few more files. When the header files differed the script uses the following: The original m68k file is named <file>_mm.h [mm for memory manager] The m68knommu file is named <file>_no.h [no for no memory manager] The files uses the following include guard: This include gaurd works as the m68knommu toolchain set the __uClinux__ symbol - so this should work in userspace too. Merging the header files for m68k and m68knommu exposes the (unexpected?) ABI differences thus it is easier to actually identify these and thus to fix them. The commit has been build tested with both a m68k and a m68knommu toolchain - with success. The commit has also been tested with "make headers_check" and this patch fixes make headers_check for m68knommu. The script used: TARGET=arch/m68k/include/asm SOURCE=arch/m68knommu/include/asm INCLUDE="cachectl.h errno.h fcntl.h hwtest.h ioctls.h ipcbuf.h \ linkage.h math-emu.h md.h mman.h movs.h msgbuf.h openprom.h \ oplib.h poll.h posix_types.h resource.h rtc.h sembuf.h shmbuf.h \ shm.h shmparam.h socket.h sockios.h spinlock.h statfs.h stat.h \ termbits.h termios.h tlb.h types.h user.h" EQUAL="auxvec.h cputime.h device.h emergency-restart.h futex.h \ ioctl.h irq_regs.h kdebug.h local.h mutex.h percpu.h \ sections.h topology.h" NOMUUFILES="anchor.h bootstd.h coldfire.h commproc.h dbg.h \ elia.h flat.h m5206sim.h m520xsim.h m523xsim.h m5249sim.h \ m5272sim.h m527xsim.h m528xsim.h m5307sim.h m532xsim.h \ m5407sim.h m68360_enet.h m68360.h m68360_pram.h m68360_quicc.h \ m68360_regs.h MC68328.h MC68332.h MC68EZ328.h MC68VZ328.h \ mcfcache.h mcfdma.h mcfmbus.h mcfne.h mcfpci.h mcfpit.h \ mcfsim.h mcfsmc.h mcftimer.h mcfuart.h mcfwdebug.h \ nettel.h quicc_simple.h smp.h" FILES="atomic.h bitops.h bootinfo.h bug.h bugs.h byteorder.h cache.h \ cacheflush.h checksum.h current.h delay.h div64.h \ dma-mapping.h dma.h elf.h entry.h fb.h fpu.h hardirq.h hw_irq.h io.h \ irq.h kmap_types.h machdep.h mc146818rtc.h mmu.h mmu_context.h \ module.h page.h page_offset.h param.h pci.h pgalloc.h \ pgtable.h processor.h ptrace.h scatterlist.h segment.h \ setup.h sigcontext.h siginfo.h signal.h string.h system.h swab.h \ thread_info.h timex.h tlbflush.h traps.h uaccess.h ucontext.h \ unaligned.h unistd.h" mergefile() { BASE=${1%.h} git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no.h git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm.h cat << EOF > ${TARGET}/$1 EOF git add ${TARGET}/$1 } set -e mkdir -p ${TARGET} git mv include/asm-m68k/* ${TARGET} rmdir include/asm-m68k git rm ${SOURCE}/Kbuild for F in $INCLUDE $EQUAL; do git rm ${SOURCE}/$F done for F in $NOMUUFILES; do git mv ${SOURCE}/$F ${TARGET}/$F done for F in $FILES ; do mergefile $F done rmdir arch/m68knommu/include/asm rmdir arch/m68knommu/include Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
119 lines
4.9 KiB
C
119 lines
4.9 KiB
C
/****************************************************************************/
|
|
|
|
/*
|
|
* mcfdebug.h -- ColdFire Debug Module support.
|
|
*
|
|
* (C) Copyright 2001, Lineo Inc. (www.lineo.com)
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef mcfdebug_h
|
|
#define mcfdebug_h
|
|
/****************************************************************************/
|
|
|
|
/* Define the debug module registers */
|
|
#define MCFDEBUG_CSR 0x0 /* Configuration status */
|
|
#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */
|
|
#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */
|
|
#define MCFDEBUG_TDR 0x7 /* Trigger definition */
|
|
#define MCFDEBUG_PBR 0x8 /* PC breakpoint */
|
|
#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */
|
|
#define MCFDEBUG_ABHR 0xc /* High address breakpoint */
|
|
#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */
|
|
#define MCFDEBUG_DBR 0xe /* Data breakpoint */
|
|
#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */
|
|
|
|
/* Define some handy constants for the trigger definition register */
|
|
#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */
|
|
#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */
|
|
#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */
|
|
#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */
|
|
#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */
|
|
#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */
|
|
#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */
|
|
#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */
|
|
#define MCFDEBUG_TDR_EDLW2 0x10000000
|
|
#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */
|
|
#define MCFDEBUG_TDR_EDWL2 0x08000000
|
|
#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */
|
|
#define MCFDEBUG_TDR_EDWU2 0x04000000
|
|
#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */
|
|
#define MCFDEBUG_TDR_EDLL2 0x02000000
|
|
#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */
|
|
#define MCFDEBUG_TDR_EDLM2 0x01000000
|
|
#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */
|
|
#define MCFDEBUG_TDR_EDUM2 0x00800000
|
|
#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */
|
|
#define MCFDEBUG_TDR_EDUU2 0x00400000
|
|
#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */
|
|
#define MCFDEBUG_TDR_DI2 0x00200000
|
|
#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */
|
|
#define MCFDEBUG_TDR_EAI2 0x00100000
|
|
#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */
|
|
#define MCFDEBUG_TDR_EAR2 0x00080000
|
|
#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */
|
|
#define MCFDEBUG_TDR_EAL2 0x00040000
|
|
#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */
|
|
#define MCFDEBUG_TDR_EPC2 0x00020000
|
|
#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */
|
|
#define MCFDEBUG_TDR_PCI2 0x00010000
|
|
|
|
/* Constants for the address attribute trigger register */
|
|
#define MCFDEBUG_AAR_RESET 0x00000005
|
|
/* Fields not yet implemented */
|
|
|
|
/* And some definitions for the writable sections of the CSR */
|
|
#define MCFDEBUG_CSR_RESET 0x00100000
|
|
#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */
|
|
#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */
|
|
#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */
|
|
#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */
|
|
#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */
|
|
#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */
|
|
#define MCFDEBUG_CSR_DDC_WRITE 0x00001000
|
|
#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */
|
|
#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */
|
|
#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */
|
|
#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */
|
|
#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */
|
|
#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */
|
|
#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */
|
|
|
|
/* Constants for the BDM address attribute register */
|
|
#define MCFDEBUG_BAAR_RESET 0x00000005
|
|
/* Fields not yet implemented */
|
|
|
|
|
|
/* This routine wrappers up the wdebug asm instruction so that the register
|
|
* and value can be relatively easily specified. The biggest hassle here is
|
|
* that the debug module instructions (2 longs) must be long word aligned and
|
|
* some pointer fiddling is performed to ensure this.
|
|
*/
|
|
static inline void wdebug(int reg, unsigned long data) {
|
|
unsigned short dbg_spc[6];
|
|
unsigned short *dbg;
|
|
|
|
// Force alignment to long word boundary
|
|
dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
|
|
|
|
// Build up the debug instruction
|
|
dbg[0] = 0x2c80 | (reg & 0xf);
|
|
dbg[1] = (data >> 16) & 0xffff;
|
|
dbg[2] = data & 0xffff;
|
|
dbg[3] = 0;
|
|
|
|
// Perform the wdebug instruction
|
|
#if 0
|
|
// This strain is for gas which doesn't have the wdebug instructions defined
|
|
asm( "move.l %0, %%a0\n\t"
|
|
".word 0xfbd0\n\t"
|
|
".word 0x0003\n\t"
|
|
:: "g" (dbg) : "a0");
|
|
#else
|
|
// And this is for when it does
|
|
asm( "wdebug (%0)" :: "a" (dbg));
|
|
#endif
|
|
}
|
|
|
|
#endif
|