![Steven King](/assets/img/avatar_default.png)
Since Grant has added the coldfire-qspi driver to next-spi, here is the platform support for the parts that have qspi hardware. This sets up gpio to do the spi chip select using the default chip select pins; it should be trivial for boards that require different or additional spi chip selects to use other gpios as needed. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
139 lines
5.3 KiB
C
139 lines
5.3 KiB
C
/****************************************************************************/
|
|
|
|
/*
|
|
* m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
|
|
*
|
|
* (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef m520xsim_h
|
|
#define m520xsim_h
|
|
/****************************************************************************/
|
|
|
|
/*
|
|
* Define the 520x SIM register set addresses.
|
|
*/
|
|
#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
|
|
#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
|
|
#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
|
|
#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
|
|
#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
|
|
#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
|
|
#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
|
|
#define MCFINTC_SIMR 0x1c /* Set interrupt mask 0-63 */
|
|
#define MCFINTC_CIMR 0x1d /* Clear interrupt mask 0-63 */
|
|
#define MCFINTC_ICR0 0x40 /* Base ICR register */
|
|
|
|
/*
|
|
* The common interrupt controller code just wants to know the absolute
|
|
* address to the SIMR and CIMR registers (not offsets into IPSBAR).
|
|
* The 520x family only has a single INTC unit.
|
|
*/
|
|
#define MCFINTC0_SIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR)
|
|
#define MCFINTC0_CIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR)
|
|
#define MCFINTC0_ICR0 (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0)
|
|
#define MCFINTC1_SIMR (0)
|
|
#define MCFINTC1_CIMR (0)
|
|
#define MCFINTC1_ICR0 (0)
|
|
|
|
#define MCFINT_VECBASE 64
|
|
#define MCFINT_UART0 26 /* Interrupt number for UART0 */
|
|
#define MCFINT_UART1 27 /* Interrupt number for UART1 */
|
|
#define MCFINT_UART2 28 /* Interrupt number for UART2 */
|
|
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
|
|
#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
|
|
|
|
/*
|
|
* SDRAM configuration registers.
|
|
*/
|
|
#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */
|
|
#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */
|
|
#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */
|
|
#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */
|
|
#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
|
|
#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
|
|
|
|
#define MCFEPORT_EPDDR 0xFC088002
|
|
#define MCFEPORT_EPDR 0xFC088004
|
|
#define MCFEPORT_EPPDR 0xFC088005
|
|
|
|
#define MCFGPIO_PODR_BUSCTL 0xFC0A4000
|
|
#define MCFGPIO_PODR_BE 0xFC0A4001
|
|
#define MCFGPIO_PODR_CS 0xFC0A4002
|
|
#define MCFGPIO_PODR_FECI2C 0xFC0A4003
|
|
#define MCFGPIO_PODR_QSPI 0xFC0A4004
|
|
#define MCFGPIO_PODR_TIMER 0xFC0A4005
|
|
#define MCFGPIO_PODR_UART 0xFC0A4006
|
|
#define MCFGPIO_PODR_FECH 0xFC0A4007
|
|
#define MCFGPIO_PODR_FECL 0xFC0A4008
|
|
|
|
#define MCFGPIO_PDDR_BUSCTL 0xFC0A400C
|
|
#define MCFGPIO_PDDR_BE 0xFC0A400D
|
|
#define MCFGPIO_PDDR_CS 0xFC0A400E
|
|
#define MCFGPIO_PDDR_FECI2C 0xFC0A400F
|
|
#define MCFGPIO_PDDR_QSPI 0xFC0A4010
|
|
#define MCFGPIO_PDDR_TIMER 0xFC0A4011
|
|
#define MCFGPIO_PDDR_UART 0xFC0A4012
|
|
#define MCFGPIO_PDDR_FECH 0xFC0A4013
|
|
#define MCFGPIO_PDDR_FECL 0xFC0A4014
|
|
|
|
#define MCFGPIO_PPDSDR_BUSCTL 0xFC0A401A
|
|
#define MCFGPIO_PPDSDR_BE 0xFC0A401B
|
|
#define MCFGPIO_PPDSDR_CS 0xFC0A401C
|
|
#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401D
|
|
#define MCFGPIO_PPDSDR_QSPI 0xFC0A401E
|
|
#define MCFGPIO_PPDSDR_TIMER 0xFC0A401F
|
|
#define MCFGPIO_PPDSDR_UART 0xFC0A4021
|
|
#define MCFGPIO_PPDSDR_FECH 0xFC0A4021
|
|
#define MCFGPIO_PPDSDR_FECL 0xFC0A4022
|
|
|
|
#define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024
|
|
#define MCFGPIO_PCLRR_BE 0xFC0A4025
|
|
#define MCFGPIO_PCLRR_CS 0xFC0A4026
|
|
#define MCFGPIO_PCLRR_FECI2C 0xFC0A4027
|
|
#define MCFGPIO_PCLRR_QSPI 0xFC0A4028
|
|
#define MCFGPIO_PCLRR_TIMER 0xFC0A4029
|
|
#define MCFGPIO_PCLRR_UART 0xFC0A402A
|
|
#define MCFGPIO_PCLRR_FECH 0xFC0A402B
|
|
#define MCFGPIO_PCLRR_FECL 0xFC0A402C
|
|
/*
|
|
* Generic GPIO support
|
|
*/
|
|
#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL
|
|
#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL
|
|
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL
|
|
#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL
|
|
#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL
|
|
|
|
#define MCFGPIO_PIN_MAX 80
|
|
#define MCFGPIO_IRQ_MAX 8
|
|
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
|
|
/****************************************************************************/
|
|
|
|
#define MCF_GPIO_PAR_UART (0xA4036)
|
|
#define MCF_GPIO_PAR_FECI2C (0xA4033)
|
|
#define MCF_GPIO_PAR_QSPI (0xA4034)
|
|
#define MCF_GPIO_PAR_FEC (0xA4038)
|
|
|
|
#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
|
|
#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002)
|
|
|
|
#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040)
|
|
#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080)
|
|
|
|
#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
|
|
#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
|
|
|
|
/*
|
|
* Reset Controll Unit.
|
|
*/
|
|
#define MCF_RCR 0xFC0A0000
|
|
#define MCF_RSR 0xFC0A0001
|
|
|
|
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
|
|
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
|
|
|
|
/****************************************************************************/
|
|
#endif /* m520xsim_h */
|