![Manuel Lauss](/assets/img/avatar_default.png)
The current mips clock build infrastructure lets a system only use either the MIPS cp0 counter or a SoC specific timer as a clocksource / clockevent device. This patch renames the core cp0 counter clocksource / clockevent functions from mips_* to r4k_* and updates the wrappers in asm-mips/time.h to call these renamed functions instead. Chips which can detect whether it is safe to use a chip-specific timer can now fall back on the cp0 counter if necessary and possible (e.g. Alchemy with a follow-on patch). Existing behaviour is not changed in any way. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
216 lines
5 KiB
C
216 lines
5 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 2007 MIPS Technologies, Inc.
|
|
* Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
|
|
*/
|
|
#include <linux/clockchips.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/percpu.h>
|
|
|
|
#include <asm/smtc_ipi.h>
|
|
#include <asm/time.h>
|
|
#include <asm/cevt-r4k.h>
|
|
|
|
/*
|
|
* The SMTC Kernel for the 34K, 1004K, et. al. replaces several
|
|
* of these routines with SMTC-specific variants.
|
|
*/
|
|
|
|
#ifndef CONFIG_MIPS_MT_SMTC
|
|
|
|
static int mips_next_event(unsigned long delta,
|
|
struct clock_event_device *evt)
|
|
{
|
|
unsigned int cnt;
|
|
int res;
|
|
|
|
cnt = read_c0_count();
|
|
cnt += delta;
|
|
write_c0_compare(cnt);
|
|
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
|
|
return res;
|
|
}
|
|
|
|
#endif /* CONFIG_MIPS_MT_SMTC */
|
|
|
|
void mips_set_clock_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *evt)
|
|
{
|
|
/* Nothing to do ... */
|
|
}
|
|
|
|
DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
|
|
int cp0_timer_irq_installed;
|
|
|
|
#ifndef CONFIG_MIPS_MT_SMTC
|
|
|
|
irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
|
|
{
|
|
const int r2 = cpu_has_mips_r2;
|
|
struct clock_event_device *cd;
|
|
int cpu = smp_processor_id();
|
|
|
|
/*
|
|
* Suckage alert:
|
|
* Before R2 of the architecture there was no way to see if a
|
|
* performance counter interrupt was pending, so we have to run
|
|
* the performance counter interrupt handler anyway.
|
|
*/
|
|
if (handle_perf_irq(r2))
|
|
goto out;
|
|
|
|
/*
|
|
* The same applies to performance counter interrupts. But with the
|
|
* above we now know that the reason we got here must be a timer
|
|
* interrupt. Being the paranoiacs we are we check anyway.
|
|
*/
|
|
if (!r2 || (read_c0_cause() & (1 << 30))) {
|
|
/* Clear Count/Compare Interrupt */
|
|
write_c0_compare(read_c0_compare());
|
|
cd = &per_cpu(mips_clockevent_device, cpu);
|
|
cd->event_handler(cd);
|
|
}
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#endif /* Not CONFIG_MIPS_MT_SMTC */
|
|
|
|
struct irqaction c0_compare_irqaction = {
|
|
.handler = c0_compare_interrupt,
|
|
.flags = IRQF_DISABLED | IRQF_PERCPU,
|
|
.name = "timer",
|
|
};
|
|
|
|
|
|
void mips_event_handler(struct clock_event_device *dev)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* FIXME: This doesn't hold for the relocated E9000 compare interrupt.
|
|
*/
|
|
static int c0_compare_int_pending(void)
|
|
{
|
|
return (read_c0_cause() >> cp0_compare_irq) & 0x100;
|
|
}
|
|
|
|
/*
|
|
* Compare interrupt can be routed and latched outside the core,
|
|
* so a single execution hazard barrier may not be enough to give
|
|
* it time to clear as seen in the Cause register. 4 time the
|
|
* pipeline depth seems reasonably conservative, and empirically
|
|
* works better in configurations with high CPU/bus clock ratios.
|
|
*/
|
|
|
|
#define compare_change_hazard() \
|
|
do { \
|
|
irq_disable_hazard(); \
|
|
irq_disable_hazard(); \
|
|
irq_disable_hazard(); \
|
|
irq_disable_hazard(); \
|
|
} while (0)
|
|
|
|
int c0_compare_int_usable(void)
|
|
{
|
|
unsigned int delta;
|
|
unsigned int cnt;
|
|
|
|
/*
|
|
* IP7 already pending? Try to clear it by acking the timer.
|
|
*/
|
|
if (c0_compare_int_pending()) {
|
|
write_c0_compare(read_c0_count());
|
|
compare_change_hazard();
|
|
if (c0_compare_int_pending())
|
|
return 0;
|
|
}
|
|
|
|
for (delta = 0x10; delta <= 0x400000; delta <<= 1) {
|
|
cnt = read_c0_count();
|
|
cnt += delta;
|
|
write_c0_compare(cnt);
|
|
compare_change_hazard();
|
|
if ((int)(read_c0_count() - cnt) < 0)
|
|
break;
|
|
/* increase delta if the timer was already expired */
|
|
}
|
|
|
|
while ((int)(read_c0_count() - cnt) <= 0)
|
|
; /* Wait for expiry */
|
|
|
|
compare_change_hazard();
|
|
if (!c0_compare_int_pending())
|
|
return 0;
|
|
|
|
write_c0_compare(read_c0_count());
|
|
compare_change_hazard();
|
|
if (c0_compare_int_pending())
|
|
return 0;
|
|
|
|
/*
|
|
* Feels like a real count / compare timer.
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
#ifndef CONFIG_MIPS_MT_SMTC
|
|
|
|
int __cpuinit r4k_clockevent_init(void)
|
|
{
|
|
uint64_t mips_freq = mips_hpt_frequency;
|
|
unsigned int cpu = smp_processor_id();
|
|
struct clock_event_device *cd;
|
|
unsigned int irq;
|
|
|
|
if (!cpu_has_counter || !mips_hpt_frequency)
|
|
return -ENXIO;
|
|
|
|
if (!c0_compare_int_usable())
|
|
return -ENXIO;
|
|
|
|
/*
|
|
* With vectored interrupts things are getting platform specific.
|
|
* get_c0_compare_int is a hook to allow a platform to return the
|
|
* interrupt number of it's liking.
|
|
*/
|
|
irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
|
|
if (get_c0_compare_int)
|
|
irq = get_c0_compare_int();
|
|
|
|
cd = &per_cpu(mips_clockevent_device, cpu);
|
|
|
|
cd->name = "MIPS";
|
|
cd->features = CLOCK_EVT_FEAT_ONESHOT;
|
|
|
|
/* Calculate the min / max delta */
|
|
cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
|
|
cd->shift = 32;
|
|
cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
|
|
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
|
|
|
|
cd->rating = 300;
|
|
cd->irq = irq;
|
|
cd->cpumask = cpumask_of(cpu);
|
|
cd->set_next_event = mips_next_event;
|
|
cd->set_mode = mips_set_clock_mode;
|
|
cd->event_handler = mips_event_handler;
|
|
|
|
clockevents_register_device(cd);
|
|
|
|
if (cp0_timer_irq_installed)
|
|
return 0;
|
|
|
|
cp0_timer_irq_installed = 1;
|
|
|
|
setup_irq(irq, &c0_compare_irqaction);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* Not CONFIG_MIPS_MT_SMTC */
|