d88746652b
This will simplify the MMC low-level init, and make it more flexible to add support for a newer MMC controller in the following patches. The patch rearranges platform data and gets rid of slot vs controller confusion in the old data structures. Also fix device id numbering in the clock code. Some code snippets are based on an earlier patch by Russell King <linux@arm.linux.org.uk>. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Tony Lindgren <tony@atomide.com>
2794 lines
85 KiB
C
2794 lines
85 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/clock24xx.h
|
|
*
|
|
* Copyright (C) 2005-2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2004-2008 Nokia Corporation
|
|
*
|
|
* Contacts:
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
|
|
#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
|
|
|
|
#include "clock.h"
|
|
|
|
#include "prm.h"
|
|
#include "cm.h"
|
|
#include "prm-regbits-24xx.h"
|
|
#include "cm-regbits-24xx.h"
|
|
#include "sdrc.h"
|
|
|
|
static void omap2_table_mpu_recalc(struct clk *clk);
|
|
static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
|
|
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
|
|
static void omap2_sys_clk_recalc(struct clk *clk);
|
|
static void omap2_osc_clk_recalc(struct clk *clk);
|
|
static void omap2_sys_clk_recalc(struct clk *clk);
|
|
static void omap2_dpllcore_recalc(struct clk *clk);
|
|
static int omap2_clk_fixed_enable(struct clk *clk);
|
|
static void omap2_clk_fixed_disable(struct clk *clk);
|
|
static int omap2_enable_osc_ck(struct clk *clk);
|
|
static void omap2_disable_osc_ck(struct clk *clk);
|
|
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
|
|
|
|
/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
|
|
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
|
|
* CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
|
|
*/
|
|
struct prcm_config {
|
|
unsigned long xtal_speed; /* crystal rate */
|
|
unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
|
|
unsigned long mpu_speed; /* speed of MPU */
|
|
unsigned long cm_clksel_mpu; /* mpu divider */
|
|
unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
|
|
unsigned long cm_clksel_gfx; /* gfx dividers */
|
|
unsigned long cm_clksel1_core; /* major subsystem dividers */
|
|
unsigned long cm_clksel1_pll; /* m,n */
|
|
unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
|
|
unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
|
|
unsigned long base_sdrc_rfr; /* base refresh timing for a set */
|
|
unsigned char flags;
|
|
};
|
|
|
|
/*
|
|
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
|
|
* These configurations are characterized by voltage and speed for clocks.
|
|
* The device is only validated for certain combinations. One way to express
|
|
* these combinations is via the 'ratio's' which the clocks operate with
|
|
* respect to each other. These ratio sets are for a given voltage/DPLL
|
|
* setting. All configurations can be described by a DPLL setting and a ratio
|
|
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
|
|
*
|
|
* 2430 differs from 2420 in that there are no more phase synchronizers used.
|
|
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
|
|
* 2430 (iva2.1, NOdsp, mdm)
|
|
*/
|
|
|
|
/* Core fields for cm_clksel, not ratio governed */
|
|
#define RX_CLKSEL_DSS1 (0x10 << 8)
|
|
#define RX_CLKSEL_DSS2 (0x0 << 13)
|
|
#define RX_CLKSEL_SSI (0x5 << 20)
|
|
|
|
/*-------------------------------------------------------------------------
|
|
* Voltage/DPLL ratios
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* 2430 Ratio's, 2430-Ratio Config 1 */
|
|
#define R1_CLKSEL_L3 (4 << 0)
|
|
#define R1_CLKSEL_L4 (2 << 5)
|
|
#define R1_CLKSEL_USB (4 << 25)
|
|
#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \
|
|
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
|
|
R1_CLKSEL_L4 | R1_CLKSEL_L3
|
|
#define R1_CLKSEL_MPU (2 << 0)
|
|
#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
|
|
#define R1_CLKSEL_DSP (2 << 0)
|
|
#define R1_CLKSEL_DSP_IF (2 << 5)
|
|
#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
|
|
#define R1_CLKSEL_GFX (2 << 0)
|
|
#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
|
|
#define R1_CLKSEL_MDM (4 << 0)
|
|
#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
|
|
|
|
/* 2430-Ratio Config 2 */
|
|
#define R2_CLKSEL_L3 (6 << 0)
|
|
#define R2_CLKSEL_L4 (2 << 5)
|
|
#define R2_CLKSEL_USB (2 << 25)
|
|
#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \
|
|
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
|
|
R2_CLKSEL_L4 | R2_CLKSEL_L3
|
|
#define R2_CLKSEL_MPU (2 << 0)
|
|
#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
|
|
#define R2_CLKSEL_DSP (2 << 0)
|
|
#define R2_CLKSEL_DSP_IF (3 << 5)
|
|
#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
|
|
#define R2_CLKSEL_GFX (2 << 0)
|
|
#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
|
|
#define R2_CLKSEL_MDM (6 << 0)
|
|
#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
|
|
|
|
/* 2430-Ratio Bootm (BYPASS) */
|
|
#define RB_CLKSEL_L3 (1 << 0)
|
|
#define RB_CLKSEL_L4 (1 << 5)
|
|
#define RB_CLKSEL_USB (1 << 25)
|
|
#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \
|
|
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
|
|
RB_CLKSEL_L4 | RB_CLKSEL_L3
|
|
#define RB_CLKSEL_MPU (1 << 0)
|
|
#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
|
|
#define RB_CLKSEL_DSP (1 << 0)
|
|
#define RB_CLKSEL_DSP_IF (1 << 5)
|
|
#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
|
|
#define RB_CLKSEL_GFX (1 << 0)
|
|
#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
|
|
#define RB_CLKSEL_MDM (1 << 0)
|
|
#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
|
|
|
|
/* 2420 Ratio Equivalents */
|
|
#define RXX_CLKSEL_VLYNQ (0x12 << 15)
|
|
#define RXX_CLKSEL_SSI (0x8 << 20)
|
|
|
|
/* 2420-PRCM III 532MHz core */
|
|
#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
|
|
#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
|
|
#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
|
|
#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
|
|
RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
|
|
RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
|
|
RIII_CLKSEL_L3
|
|
#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
|
|
#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
|
|
#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
|
|
#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
|
|
#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
|
|
#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
|
|
#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
|
|
#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
|
|
RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
|
|
RIII_CLKSEL_DSP
|
|
#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
|
|
#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
|
|
|
|
/* 2420-PRCM II 600MHz core */
|
|
#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
|
|
#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
|
|
#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
|
|
#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \
|
|
RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
|
|
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
|
|
RII_CLKSEL_L4 | RII_CLKSEL_L3
|
|
#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
|
|
#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
|
|
#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
|
|
#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
|
|
#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
|
|
#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
|
|
#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
|
|
#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \
|
|
RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
|
|
RII_CLKSEL_DSP
|
|
#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
|
|
#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
|
|
|
|
/* 2420-PRCM I 660MHz core */
|
|
#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
|
|
#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
|
|
#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
|
|
#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \
|
|
RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
|
|
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
|
|
RI_CLKSEL_L4 | RI_CLKSEL_L3
|
|
#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
|
|
#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
|
|
#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
|
|
#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
|
|
#define RI_SYNC_DSP (1 << 7) /* Activate sync */
|
|
#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
|
|
#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
|
|
#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \
|
|
RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
|
|
RI_CLKSEL_DSP
|
|
#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
|
|
#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
|
|
|
|
/* 2420-PRCM VII (boot) */
|
|
#define RVII_CLKSEL_L3 (1 << 0)
|
|
#define RVII_CLKSEL_L4 (1 << 5)
|
|
#define RVII_CLKSEL_DSS1 (1 << 8)
|
|
#define RVII_CLKSEL_DSS2 (0 << 13)
|
|
#define RVII_CLKSEL_VLYNQ (1 << 15)
|
|
#define RVII_CLKSEL_SSI (1 << 20)
|
|
#define RVII_CLKSEL_USB (1 << 25)
|
|
|
|
#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
|
|
RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
|
|
RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
|
|
|
|
#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
|
|
#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
|
|
|
|
#define RVII_CLKSEL_DSP (1 << 0)
|
|
#define RVII_CLKSEL_DSP_IF (1 << 5)
|
|
#define RVII_SYNC_DSP (0 << 7)
|
|
#define RVII_CLKSEL_IVA (1 << 8)
|
|
#define RVII_SYNC_IVA (0 << 13)
|
|
#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
|
|
RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
|
|
|
|
#define RVII_CLKSEL_GFX (1 << 0)
|
|
#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
|
|
|
|
/*-------------------------------------------------------------------------
|
|
* 2430 Target modes: Along with each configuration the CPU has several
|
|
* modes which goes along with them. Modes mainly are the addition of
|
|
* describe DPLL combinations to go along with a ratio.
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* Hardware governed */
|
|
#define MX_48M_SRC (0 << 3)
|
|
#define MX_54M_SRC (0 << 5)
|
|
#define MX_APLLS_CLIKIN_12 (3 << 23)
|
|
#define MX_APLLS_CLIKIN_13 (2 << 23)
|
|
#define MX_APLLS_CLIKIN_19_2 (0 << 23)
|
|
|
|
/*
|
|
* 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
|
|
* #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
|
|
*/
|
|
#define M5A_DPLL_MULT_12 (133 << 12)
|
|
#define M5A_DPLL_DIV_12 (5 << 8)
|
|
#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
|
|
MX_APLLS_CLIKIN_12
|
|
#define M5A_DPLL_MULT_13 (61 << 12)
|
|
#define M5A_DPLL_DIV_13 (2 << 8)
|
|
#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
|
|
MX_APLLS_CLIKIN_13
|
|
#define M5A_DPLL_MULT_19 (55 << 12)
|
|
#define M5A_DPLL_DIV_19 (3 << 8)
|
|
#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
|
|
MX_APLLS_CLIKIN_19_2
|
|
/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
|
|
#define M5B_DPLL_MULT_12 (50 << 12)
|
|
#define M5B_DPLL_DIV_12 (2 << 8)
|
|
#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
|
|
MX_APLLS_CLIKIN_12
|
|
#define M5B_DPLL_MULT_13 (200 << 12)
|
|
#define M5B_DPLL_DIV_13 (12 << 8)
|
|
|
|
#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
|
|
MX_APLLS_CLIKIN_13
|
|
#define M5B_DPLL_MULT_19 (125 << 12)
|
|
#define M5B_DPLL_DIV_19 (31 << 8)
|
|
#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
|
|
MX_APLLS_CLIKIN_19_2
|
|
/*
|
|
* #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
|
|
*/
|
|
#define M4_DPLL_MULT_12 (133 << 12)
|
|
#define M4_DPLL_DIV_12 (3 << 8)
|
|
#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
|
|
MX_APLLS_CLIKIN_12
|
|
|
|
#define M4_DPLL_MULT_13 (399 << 12)
|
|
#define M4_DPLL_DIV_13 (12 << 8)
|
|
#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
|
|
MX_APLLS_CLIKIN_13
|
|
|
|
#define M4_DPLL_MULT_19 (145 << 12)
|
|
#define M4_DPLL_DIV_19 (6 << 8)
|
|
#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
|
|
MX_APLLS_CLIKIN_19_2
|
|
|
|
/*
|
|
* #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
|
|
*/
|
|
#define M3_DPLL_MULT_12 (55 << 12)
|
|
#define M3_DPLL_DIV_12 (1 << 8)
|
|
#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
|
|
MX_APLLS_CLIKIN_12
|
|
#define M3_DPLL_MULT_13 (76 << 12)
|
|
#define M3_DPLL_DIV_13 (2 << 8)
|
|
#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
|
|
MX_APLLS_CLIKIN_13
|
|
#define M3_DPLL_MULT_19 (17 << 12)
|
|
#define M3_DPLL_DIV_19 (0 << 8)
|
|
#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
|
|
MX_APLLS_CLIKIN_19_2
|
|
|
|
/*
|
|
* #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
|
|
*/
|
|
#define M2_DPLL_MULT_12 (55 << 12)
|
|
#define M2_DPLL_DIV_12 (1 << 8)
|
|
#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
|
|
MX_APLLS_CLIKIN_12
|
|
|
|
/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
|
|
* relock time issue */
|
|
/* Core frequency changed from 330/165 to 329/164 MHz*/
|
|
#define M2_DPLL_MULT_13 (76 << 12)
|
|
#define M2_DPLL_DIV_13 (2 << 8)
|
|
#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
|
|
MX_APLLS_CLIKIN_13
|
|
|
|
#define M2_DPLL_MULT_19 (17 << 12)
|
|
#define M2_DPLL_DIV_19 (0 << 8)
|
|
#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
|
|
MX_APLLS_CLIKIN_19_2
|
|
|
|
/* boot (boot) */
|
|
#define MB_DPLL_MULT (1 << 12)
|
|
#define MB_DPLL_DIV (0 << 8)
|
|
#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
|
|
MB_DPLL_MULT | MX_APLLS_CLIKIN_12
|
|
|
|
#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
|
|
MB_DPLL_MULT | MX_APLLS_CLIKIN_13
|
|
|
|
#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
|
|
MB_DPLL_MULT | MX_APLLS_CLIKIN_19
|
|
|
|
/*
|
|
* 2430 - chassis (sedna)
|
|
* 165 (ratio1) same as above #2
|
|
* 150 (ratio1)
|
|
* 133 (ratio2) same as above #4
|
|
* 110 (ratio2) same as above #3
|
|
* 104 (ratio2)
|
|
* boot (boot)
|
|
*/
|
|
|
|
/* PRCM I target DPLL = 2*330MHz = 660MHz */
|
|
#define MI_DPLL_MULT_12 (55 << 12)
|
|
#define MI_DPLL_DIV_12 (1 << 8)
|
|
#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
|
|
MX_APLLS_CLIKIN_12
|
|
|
|
/*
|
|
* 2420 Equivalent - mode registers
|
|
* PRCM II , target DPLL = 2*300MHz = 600MHz
|
|
*/
|
|
#define MII_DPLL_MULT_12 (50 << 12)
|
|
#define MII_DPLL_DIV_12 (1 << 8)
|
|
#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
|
|
MX_APLLS_CLIKIN_12
|
|
#define MII_DPLL_MULT_13 (300 << 12)
|
|
#define MII_DPLL_DIV_13 (12 << 8)
|
|
#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
|
|
MX_APLLS_CLIKIN_13
|
|
|
|
/* PRCM III target DPLL = 2*266 = 532MHz*/
|
|
#define MIII_DPLL_MULT_12 (133 << 12)
|
|
#define MIII_DPLL_DIV_12 (5 << 8)
|
|
#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
|
|
MX_APLLS_CLIKIN_12
|
|
#define MIII_DPLL_MULT_13 (266 << 12)
|
|
#define MIII_DPLL_DIV_13 (12 << 8)
|
|
#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
|
|
MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
|
|
MX_APLLS_CLIKIN_13
|
|
|
|
/* PRCM VII (boot bypass) */
|
|
#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
|
|
#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
|
|
|
|
/* High and low operation value */
|
|
#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
|
|
#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
|
|
|
|
/* MPU speed defines */
|
|
#define S12M 12000000
|
|
#define S13M 13000000
|
|
#define S19M 19200000
|
|
#define S26M 26000000
|
|
#define S100M 100000000
|
|
#define S133M 133000000
|
|
#define S150M 150000000
|
|
#define S164M 164000000
|
|
#define S165M 165000000
|
|
#define S199M 199000000
|
|
#define S200M 200000000
|
|
#define S266M 266000000
|
|
#define S300M 300000000
|
|
#define S329M 329000000
|
|
#define S330M 330000000
|
|
#define S399M 399000000
|
|
#define S400M 400000000
|
|
#define S532M 532000000
|
|
#define S600M 600000000
|
|
#define S658M 658000000
|
|
#define S660M 660000000
|
|
#define S798M 798000000
|
|
|
|
/*-------------------------------------------------------------------------
|
|
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
|
|
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
|
|
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
|
|
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
|
|
*
|
|
* Filling in table based on H4 boards and 2430-SDPs variants available.
|
|
* There are quite a few more rates combinations which could be defined.
|
|
*
|
|
* When multiple values are defined the start up will try and choose the
|
|
* fastest one. If a 'fast' value is defined, then automatically, the /2
|
|
* one should be included as it can be used. Generally having more that
|
|
* one fast set does not make sense, as static timings need to be changed
|
|
* to change the set. The exception is the bypass setting which is
|
|
* availble for low power bypass.
|
|
*
|
|
* Note: This table needs to be sorted, fastest to slowest.
|
|
*-------------------------------------------------------------------------*/
|
|
static struct prcm_config rate_table[] = {
|
|
/* PRCM I - FAST */
|
|
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
|
|
RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
|
|
RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM II - FAST */
|
|
{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
|
|
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
|
|
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_242X},
|
|
|
|
{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
|
|
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
|
|
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM III - FAST */
|
|
{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
|
|
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
|
|
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_242X},
|
|
|
|
{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
|
|
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
|
|
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM II - SLOW */
|
|
{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
|
|
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
|
|
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_242X},
|
|
|
|
{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
|
|
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
|
|
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM III - SLOW */
|
|
{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
|
|
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
|
|
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_242X},
|
|
|
|
{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
|
|
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
|
|
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM-VII (boot-bypass) */
|
|
{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
|
|
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
|
|
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM-VII (boot-bypass) */
|
|
{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
|
|
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
|
|
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
|
|
RATE_IN_242X},
|
|
|
|
/* PRCM #4 - ratio2 (ES2.1) - FAST */
|
|
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
|
|
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
|
|
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM #2 - ratio1 (ES2) - FAST */
|
|
{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
|
|
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
|
|
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_165MHz,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM #5a - ratio1 - FAST */
|
|
{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
|
|
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
|
|
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM #5b - ratio1 - FAST */
|
|
{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
|
|
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
|
|
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM #4 - ratio1 (ES2.1) - SLOW */
|
|
{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
|
|
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
|
|
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM #2 - ratio1 (ES2) - SLOW */
|
|
{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
|
|
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
|
|
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_165MHz,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM #5a - ratio1 - SLOW */
|
|
{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
|
|
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
|
|
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_133MHz,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM #5b - ratio1 - SLOW*/
|
|
{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
|
|
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
|
|
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_100MHz,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM-boot/bypass */
|
|
{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
|
|
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
|
|
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_BYPASS,
|
|
RATE_IN_243X},
|
|
|
|
/* PRCM-boot/bypass */
|
|
{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
|
|
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
|
|
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
|
|
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
|
|
SDRC_RFR_CTRL_BYPASS,
|
|
RATE_IN_243X},
|
|
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------
|
|
* 24xx clock tree.
|
|
*
|
|
* NOTE:In many cases here we are assigning a 'default' parent. In many
|
|
* cases the parent is selectable. The get/set parent calls will also
|
|
* switch sources.
|
|
*
|
|
* Many some clocks say always_enabled, but they can be auto idled for
|
|
* power savings. They will always be available upon clock request.
|
|
*
|
|
* Several sources are given initial rates which may be wrong, this will
|
|
* be fixed up in the init func.
|
|
*
|
|
* Things are broadly separated below by clock domains. It is
|
|
* noteworthy that most periferals have dependencies on multiple clock
|
|
* domains. Many get their interface clocks from the L4 domain, but get
|
|
* functional clocks from fixed sources or other core domain derived
|
|
* clocks.
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* Base external input clocks */
|
|
static struct clk func_32k_ck = {
|
|
.name = "func_32k_ck",
|
|
.rate = 32000,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.recalc = &propagate_rate,
|
|
};
|
|
|
|
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
|
|
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
|
|
.name = "osc_ck",
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_PROPAGATES,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.enable = &omap2_enable_osc_ck,
|
|
.disable = &omap2_disable_osc_ck,
|
|
.recalc = &omap2_osc_clk_recalc,
|
|
};
|
|
|
|
/* Without modem likely 12MHz, with modem likely 13MHz */
|
|
static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
|
|
.name = "sys_ck", /* ~ ref_clk also */
|
|
.parent = &osc_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
ALWAYS_ENABLED | RATE_PROPAGATES,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.recalc = &omap2_sys_clk_recalc,
|
|
};
|
|
|
|
static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
|
|
.name = "alt_ck",
|
|
.rate = 54000000,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.recalc = &propagate_rate,
|
|
};
|
|
|
|
/*
|
|
* Analog domain root source clocks
|
|
*/
|
|
|
|
/* dpll_ck, is broken out in to special cases through clksel */
|
|
/* REVISIT: Rate changes on dpll_ck trigger a full set change. ...
|
|
* deal with this
|
|
*/
|
|
|
|
static struct dpll_data dpll_dd = {
|
|
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
|
|
.mult_mask = OMAP24XX_DPLL_MULT_MASK,
|
|
.div1_mask = OMAP24XX_DPLL_DIV_MASK,
|
|
.max_multiplier = 1024,
|
|
.max_divider = 16,
|
|
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
|
|
};
|
|
|
|
/*
|
|
* XXX Cannot add round_rate here yet, as this is still a composite clock,
|
|
* not just a DPLL
|
|
*/
|
|
static struct clk dpll_ck = {
|
|
.name = "dpll_ck",
|
|
.parent = &sys_ck, /* Can be func_32k also */
|
|
.dpll_data = &dpll_dd,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_PROPAGATES | ALWAYS_ENABLED,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.recalc = &omap2_dpllcore_recalc,
|
|
.set_rate = &omap2_reprogram_dpllcore,
|
|
};
|
|
|
|
static struct clk apll96_ck = {
|
|
.name = "apll96_ck",
|
|
.parent = &sys_ck,
|
|
.rate = 96000000,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
|
|
.enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
|
|
.enable = &omap2_clk_fixed_enable,
|
|
.disable = &omap2_clk_fixed_disable,
|
|
.recalc = &propagate_rate,
|
|
};
|
|
|
|
static struct clk apll54_ck = {
|
|
.name = "apll54_ck",
|
|
.parent = &sys_ck,
|
|
.rate = 54000000,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
|
|
.enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
|
|
.enable = &omap2_clk_fixed_enable,
|
|
.disable = &omap2_clk_fixed_disable,
|
|
.recalc = &propagate_rate,
|
|
};
|
|
|
|
/*
|
|
* PRCM digital base sources
|
|
*/
|
|
|
|
/* func_54m_ck */
|
|
|
|
static const struct clksel_rate func_54m_apll54_rates[] = {
|
|
{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel_rate func_54m_alt_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel func_54m_clksel[] = {
|
|
{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
|
|
{ .parent = &alt_ck, .rates = func_54m_alt_rates, },
|
|
{ .parent = NULL },
|
|
};
|
|
|
|
static struct clk func_54m_ck = {
|
|
.name = "func_54m_ck",
|
|
.parent = &apll54_ck, /* can also be alt_clk */
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_54M_SOURCE,
|
|
.clksel = func_54m_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk core_ck = {
|
|
.name = "core_ck",
|
|
.parent = &dpll_ck, /* can also be 32k */
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
ALWAYS_ENABLED | RATE_PROPAGATES,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
/* func_96m_ck */
|
|
static const struct clksel_rate func_96m_apll96_rates[] = {
|
|
{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel_rate func_96m_alt_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel func_96m_clksel[] = {
|
|
{ .parent = &apll96_ck, .rates = func_96m_apll96_rates },
|
|
{ .parent = &alt_ck, .rates = func_96m_alt_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
/* The parent of this clock is not selectable on 2420. */
|
|
static struct clk func_96m_ck = {
|
|
.name = "func_96m_ck",
|
|
.parent = &apll96_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP2430_96M_SOURCE,
|
|
.clksel = func_96m_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/* func_48m_ck */
|
|
|
|
static const struct clksel_rate func_48m_apll96_rates[] = {
|
|
{ .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel_rate func_48m_alt_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel func_48m_clksel[] = {
|
|
{ .parent = &apll96_ck, .rates = func_48m_apll96_rates },
|
|
{ .parent = &alt_ck, .rates = func_48m_alt_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk func_48m_ck = {
|
|
.name = "func_48m_ck",
|
|
.parent = &apll96_ck, /* 96M or Alt */
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_48M_SOURCE,
|
|
.clksel = func_48m_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static struct clk func_12m_ck = {
|
|
.name = "func_12m_ck",
|
|
.parent = &func_48m_ck,
|
|
.fixed_div = 4,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.recalc = &omap2_fixed_divisor_recalc,
|
|
};
|
|
|
|
/* Secure timer, only available in secure mode */
|
|
static struct clk wdt1_osc_ck = {
|
|
.name = "ck_wdt1_osc",
|
|
.parent = &osc_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
/*
|
|
* The common_clkout* clksel_rate structs are common to
|
|
* sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
|
|
* sys_clkout2_* are 2420-only, so the
|
|
* clksel_rate flags fields are inaccurate for those clocks. This is
|
|
* harmless since access to those clocks are gated by the struct clk
|
|
* flags fields, which mark them as 2420-only.
|
|
*/
|
|
static const struct clksel_rate common_clkout_src_core_rates[] = {
|
|
{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel_rate common_clkout_src_sys_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel_rate common_clkout_src_96m_rates[] = {
|
|
{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel_rate common_clkout_src_54m_rates[] = {
|
|
{ .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel common_clkout_src_clksel[] = {
|
|
{ .parent = &core_ck, .rates = common_clkout_src_core_rates },
|
|
{ .parent = &sys_ck, .rates = common_clkout_src_sys_rates },
|
|
{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
|
|
{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk sys_clkout_src = {
|
|
.name = "sys_clkout_src",
|
|
.parent = &func_54m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
RATE_PROPAGATES,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
|
|
.enable_bit = OMAP24XX_CLKOUT_EN_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
|
|
.clksel_mask = OMAP24XX_CLKOUT_SOURCE_MASK,
|
|
.clksel = common_clkout_src_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static const struct clksel_rate common_clkout_rates[] = {
|
|
{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
|
|
{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
|
|
{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
|
|
{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel sys_clkout_clksel[] = {
|
|
{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk sys_clkout = {
|
|
.name = "sys_clkout",
|
|
.parent = &sys_clkout_src,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
PARENT_CONTROLS_CLOCK,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
|
|
.clksel_mask = OMAP24XX_CLKOUT_DIV_MASK,
|
|
.clksel = sys_clkout_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/* In 2430, new in 2420 ES2 */
|
|
static struct clk sys_clkout2_src = {
|
|
.name = "sys_clkout2_src",
|
|
.parent = &func_54m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
|
|
.enable_bit = OMAP2420_CLKOUT2_EN_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
|
|
.clksel_mask = OMAP2420_CLKOUT2_SOURCE_MASK,
|
|
.clksel = common_clkout_src_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static const struct clksel sys_clkout2_clksel[] = {
|
|
{ .parent = &sys_clkout2_src, .rates = common_clkout_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
/* In 2430, new in 2420 ES2 */
|
|
static struct clk sys_clkout2 = {
|
|
.name = "sys_clkout2",
|
|
.parent = &sys_clkout2_src,
|
|
.flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
|
|
.clksel_mask = OMAP2420_CLKOUT2_DIV_MASK,
|
|
.clksel = sys_clkout2_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static struct clk emul_ck = {
|
|
.name = "emul_ck",
|
|
.parent = &func_54m_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL,
|
|
.enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
|
|
};
|
|
|
|
/*
|
|
* MPU clock domain
|
|
* Clocks:
|
|
* MPU_FCLK, MPU_ICLK
|
|
* INT_M_FCLK, INT_M_I_CLK
|
|
*
|
|
* - Individual clocks are hardware managed.
|
|
* - Base divider comes from: CM_CLKSEL_MPU
|
|
*
|
|
*/
|
|
static const struct clksel_rate mpu_core_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
|
|
{ .div = 4, .val = 4, .flags = RATE_IN_242X },
|
|
{ .div = 6, .val = 6, .flags = RATE_IN_242X },
|
|
{ .div = 8, .val = 8, .flags = RATE_IN_242X },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel mpu_clksel[] = {
|
|
{ .parent = &core_ck, .rates = mpu_core_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk mpu_ck = { /* Control cpu */
|
|
.name = "mpu_ck",
|
|
.parent = &core_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
ALWAYS_ENABLED | DELAYED_APP |
|
|
CONFIG_PARTICIPANT | RATE_PROPAGATES,
|
|
.clkdm_name = "mpu_clkdm",
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
|
|
.clksel_mask = OMAP24XX_CLKSEL_MPU_MASK,
|
|
.clksel = mpu_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/*
|
|
* DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
|
|
* Clocks:
|
|
* 2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
|
|
* 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
|
|
*
|
|
* Won't be too specific here. The core clock comes into this block
|
|
* it is divided then tee'ed. One branch goes directly to xyz enable
|
|
* controls. The other branch gets further divided by 2 then possibly
|
|
* routed into a synchronizer and out of clocks abc.
|
|
*/
|
|
static const struct clksel_rate dsp_fck_core_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
|
|
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
|
|
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
|
|
{ .div = 6, .val = 6, .flags = RATE_IN_242X },
|
|
{ .div = 8, .val = 8, .flags = RATE_IN_242X },
|
|
{ .div = 12, .val = 12, .flags = RATE_IN_242X },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel dsp_fck_clksel[] = {
|
|
{ .parent = &core_ck, .rates = dsp_fck_core_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk dsp_fck = {
|
|
.name = "dsp_fck",
|
|
.parent = &core_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
|
|
CONFIG_PARTICIPANT | RATE_PROPAGATES,
|
|
.clkdm_name = "dsp_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
|
|
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
|
|
.clksel_mask = OMAP24XX_CLKSEL_DSP_MASK,
|
|
.clksel = dsp_fck_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/* DSP interface clock */
|
|
static const struct clksel_rate dsp_irate_ick_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
|
|
{ .div = 3, .val = 3, .flags = RATE_IN_243X },
|
|
{ .div = 0 },
|
|
};
|
|
|
|
static const struct clksel dsp_irate_ick_clksel[] = {
|
|
{ .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
/* This clock does not exist as such in the TRM. */
|
|
static struct clk dsp_irate_ick = {
|
|
.name = "dsp_irate_ick",
|
|
.parent = &dsp_fck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
|
|
CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK,
|
|
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
|
|
.clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK,
|
|
.clksel = dsp_irate_ick_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/* 2420 only */
|
|
static struct clk dsp_ick = {
|
|
.name = "dsp_ick", /* apparently ipi and isp */
|
|
.parent = &dsp_irate_ick,
|
|
.flags = CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
|
|
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */
|
|
};
|
|
|
|
/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
|
|
static struct clk iva2_1_ick = {
|
|
.name = "iva2_1_ick",
|
|
.parent = &dsp_irate_ick,
|
|
.flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
|
|
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
|
|
};
|
|
|
|
/*
|
|
* The IVA1 is an ARM7 core on the 2420 that has nothing to do with
|
|
* the C54x, but which is contained in the DSP powerdomain. Does not
|
|
* exist on later OMAPs.
|
|
*/
|
|
static struct clk iva1_ifck = {
|
|
.name = "iva1_ifck",
|
|
.parent = &core_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
|
|
RATE_PROPAGATES | DELAYED_APP,
|
|
.clkdm_name = "iva1_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP2420_EN_IVA_COP_SHIFT,
|
|
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
|
|
.clksel_mask = OMAP2420_CLKSEL_IVA_MASK,
|
|
.clksel = dsp_fck_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/* IVA1 mpu/int/i/f clocks are /2 of parent */
|
|
static struct clk iva1_mpu_int_ifck = {
|
|
.name = "iva1_mpu_int_ifck",
|
|
.parent = &iva1_ifck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "iva1_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP2420_EN_IVA_MPU_SHIFT,
|
|
.fixed_div = 2,
|
|
.recalc = &omap2_fixed_divisor_recalc,
|
|
};
|
|
|
|
/*
|
|
* L3 clock domain
|
|
* L3 clocks are used for both interface and functional clocks to
|
|
* multiple entities. Some of these clocks are completely managed
|
|
* by hardware, and some others allow software control. Hardware
|
|
* managed ones general are based on directly CLK_REQ signals and
|
|
* various auto idle settings. The functional spec sets many of these
|
|
* as 'tie-high' for their enables.
|
|
*
|
|
* I-CLOCKS:
|
|
* L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
|
|
* CAM, HS-USB.
|
|
* F-CLOCK
|
|
* SSI.
|
|
*
|
|
* GPMC memories and SDRC have timing and clock sensitive registers which
|
|
* may very well need notification when the clock changes. Currently for low
|
|
* operating points, these are taken care of in sleep.S.
|
|
*/
|
|
static const struct clksel_rate core_l3_core_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_242X },
|
|
{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
|
|
{ .div = 8, .val = 8, .flags = RATE_IN_242X },
|
|
{ .div = 12, .val = 12, .flags = RATE_IN_242X },
|
|
{ .div = 16, .val = 16, .flags = RATE_IN_242X },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel core_l3_clksel[] = {
|
|
{ .parent = &core_ck, .rates = core_l3_core_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */
|
|
.name = "core_l3_ck",
|
|
.parent = &core_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
ALWAYS_ENABLED | DELAYED_APP |
|
|
CONFIG_PARTICIPANT | RATE_PROPAGATES,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_CLKSEL_L3_MASK,
|
|
.clksel = core_l3_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/* usb_l4_ick */
|
|
static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel usb_l4_ick_clksel[] = {
|
|
{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
|
|
{ .parent = NULL },
|
|
};
|
|
|
|
/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
|
|
static struct clk usb_l4_ick = { /* FS-USB interface clock */
|
|
.name = "usb_l4_ick",
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
DELAYED_APP | CONFIG_PARTICIPANT,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP24XX_EN_USB_SHIFT,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_CLKSEL_USB_MASK,
|
|
.clksel = usb_l4_ick_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/*
|
|
* L4 clock management domain
|
|
*
|
|
* This domain contains lots of interface clocks from the L4 interface, some
|
|
* functional clocks. Fixed APLL functional source clocks are managed in
|
|
* this domain.
|
|
*/
|
|
static const struct clksel_rate l4_core_l3_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel l4_clksel[] = {
|
|
{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk l4_ck = { /* used both as an ick and fck */
|
|
.name = "l4_ck",
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_CLKSEL_L4_MASK,
|
|
.clksel = l4_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
/*
|
|
* SSI is in L3 management domain, its direct parent is core not l3,
|
|
* many core power domain entities are grouped into the L3 clock
|
|
* domain.
|
|
* SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
|
|
*
|
|
* ssr = core/1/2/3/4/5, sst = 1/2 ssr.
|
|
*/
|
|
static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
|
|
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
|
|
{ .div = 5, .val = 5, .flags = RATE_IN_243X },
|
|
{ .div = 6, .val = 6, .flags = RATE_IN_242X },
|
|
{ .div = 8, .val = 8, .flags = RATE_IN_242X },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel ssi_ssr_sst_fck_clksel[] = {
|
|
{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk ssi_ssr_sst_fck = {
|
|
.name = "ssi_fck",
|
|
.parent = &core_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
DELAYED_APP,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP24XX_EN_SSI_SHIFT,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_CLKSEL_SSI_MASK,
|
|
.clksel = ssi_ssr_sst_fck_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
|
|
/*
|
|
* GFX clock domain
|
|
* Clocks:
|
|
* GFX_FCLK, GFX_ICLK
|
|
* GFX_CG1(2d), GFX_CG2(3d)
|
|
*
|
|
* GFX_FCLK runs from L3, and is divided by (1,2,3,4)
|
|
* The 2d and 3d clocks run at a hardware determined
|
|
* divided value of fclk.
|
|
*
|
|
*/
|
|
/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */
|
|
|
|
/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
|
|
static const struct clksel gfx_fck_clksel[] = {
|
|
{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
|
|
{ .parent = NULL },
|
|
};
|
|
|
|
static struct clk gfx_3d_fck = {
|
|
.name = "gfx_3d_fck",
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "gfx_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP24XX_EN_3D_SHIFT,
|
|
.clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
|
|
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
|
|
.clksel = gfx_fck_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static struct clk gfx_2d_fck = {
|
|
.name = "gfx_2d_fck",
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "gfx_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP24XX_EN_2D_SHIFT,
|
|
.clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
|
|
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
|
|
.clksel = gfx_fck_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static struct clk gfx_ick = {
|
|
.name = "gfx_ick", /* From l3 */
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "gfx_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP_EN_GFX_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
/*
|
|
* Modem clock domain (2430)
|
|
* CLOCKS:
|
|
* MDM_OSC_CLK
|
|
* MDM_ICLK
|
|
* These clocks are usable in chassis mode only.
|
|
*/
|
|
static const struct clksel_rate mdm_ick_core_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_243X },
|
|
{ .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
|
|
{ .div = 6, .val = 6, .flags = RATE_IN_243X },
|
|
{ .div = 9, .val = 9, .flags = RATE_IN_243X },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel mdm_ick_clksel[] = {
|
|
{ .parent = &core_ck, .rates = mdm_ick_core_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk mdm_ick = { /* used both as a ick and fck */
|
|
.name = "mdm_ick",
|
|
.parent = &core_ck,
|
|
.flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
|
|
.clkdm_name = "mdm_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
|
|
.clksel_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
|
|
.clksel_mask = OMAP2430_CLKSEL_MDM_MASK,
|
|
.clksel = mdm_ick_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static struct clk mdm_osc_ck = {
|
|
.name = "mdm_osc_ck",
|
|
.parent = &osc_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "mdm_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP2430_EN_OSC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
/*
|
|
* DSS clock domain
|
|
* CLOCKs:
|
|
* DSS_L4_ICLK, DSS_L3_ICLK,
|
|
* DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
|
|
*
|
|
* DSS is both initiator and target.
|
|
*/
|
|
/* XXX Add RATE_NOT_VALIDATED */
|
|
|
|
static const struct clksel_rate dss1_fck_sys_rates[] = {
|
|
{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel_rate dss1_fck_core_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
|
|
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
|
|
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
|
|
{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
|
|
{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
|
|
{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
|
|
{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
|
|
{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
|
|
{ .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel dss1_fck_clksel[] = {
|
|
{ .parent = &sys_ck, .rates = dss1_fck_sys_rates },
|
|
{ .parent = &core_ck, .rates = dss1_fck_core_rates },
|
|
{ .parent = NULL },
|
|
};
|
|
|
|
static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */
|
|
.name = "dss_ick",
|
|
.parent = &l4_ck, /* really both l3 and l4 */
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "dss_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk dss1_fck = {
|
|
.name = "dss1_fck",
|
|
.parent = &core_ck, /* Core or sys */
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
DELAYED_APP,
|
|
.clkdm_name = "dss_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_CLKSEL_DSS1_MASK,
|
|
.clksel = dss1_fck_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static const struct clksel_rate dss2_fck_sys_rates[] = {
|
|
{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel_rate dss2_fck_48m_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel dss2_fck_clksel[] = {
|
|
{ .parent = &sys_ck, .rates = dss2_fck_sys_rates },
|
|
{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk dss2_fck = { /* Alt clk used in power management */
|
|
.name = "dss2_fck",
|
|
.parent = &sys_ck, /* fixed at sys_ck or 48MHz */
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
DELAYED_APP,
|
|
.clkdm_name = "dss_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_DSS2_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_CLKSEL_DSS2_MASK,
|
|
.clksel = dss2_fck_clksel,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk dss_54m_fck = { /* Alt clk used in power management */
|
|
.name = "dss_54m_fck", /* 54m tv clk */
|
|
.parent = &func_54m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "dss_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_TV_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
/*
|
|
* CORE power domain ICLK & FCLK defines.
|
|
* Many of the these can have more than one possible parent. Entries
|
|
* here will likely have an L4 interface parent, and may have multiple
|
|
* functional clock parents.
|
|
*/
|
|
static const struct clksel_rate gpt_alt_rates[] = {
|
|
{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel omap24xx_gpt_clksel[] = {
|
|
{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
|
|
{ .parent = &sys_ck, .rates = gpt_sys_rates },
|
|
{ .parent = &alt_ck, .rates = gpt_alt_rates },
|
|
{ .parent = NULL },
|
|
};
|
|
|
|
static struct clk gpt1_ick = {
|
|
.name = "gpt1_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt1_fck = {
|
|
.name = "gpt1_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT1_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static struct clk gpt2_ick = {
|
|
.name = "gpt2_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt2_fck = {
|
|
.name = "gpt2_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT2_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT2_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt3_ick = {
|
|
.name = "gpt3_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt3_fck = {
|
|
.name = "gpt3_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT3_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT3_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt4_ick = {
|
|
.name = "gpt4_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT4_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt4_fck = {
|
|
.name = "gpt4_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT4_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT4_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt5_ick = {
|
|
.name = "gpt5_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT5_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt5_fck = {
|
|
.name = "gpt5_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT5_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT5_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt6_ick = {
|
|
.name = "gpt6_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT6_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt6_fck = {
|
|
.name = "gpt6_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT6_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT6_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt7_ick = {
|
|
.name = "gpt7_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT7_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt7_fck = {
|
|
.name = "gpt7_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT7_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT7_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt8_ick = {
|
|
.name = "gpt8_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT8_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt8_fck = {
|
|
.name = "gpt8_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT8_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT8_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt9_ick = {
|
|
.name = "gpt9_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT9_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt9_fck = {
|
|
.name = "gpt9_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT9_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT9_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt10_ick = {
|
|
.name = "gpt10_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT10_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt10_fck = {
|
|
.name = "gpt10_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT10_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT10_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt11_ick = {
|
|
.name = "gpt11_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT11_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt11_fck = {
|
|
.name = "gpt11_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT11_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT11_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk gpt12_ick = {
|
|
.name = "gpt12_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpt12_fck = {
|
|
.name = "gpt12_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
|
|
.clksel_mask = OMAP24XX_CLKSEL_GPT12_MASK,
|
|
.clksel = omap24xx_gpt_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp1_ick = {
|
|
.name = "mcbsp_ick",
|
|
.id = 1,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp1_fck = {
|
|
.name = "mcbsp_fck",
|
|
.id = 1,
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp2_ick = {
|
|
.name = "mcbsp_ick",
|
|
.id = 2,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp2_fck = {
|
|
.name = "mcbsp_fck",
|
|
.id = 2,
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp3_ick = {
|
|
.name = "mcbsp_ick",
|
|
.id = 3,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp3_fck = {
|
|
.name = "mcbsp_fck",
|
|
.id = 3,
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp4_ick = {
|
|
.name = "mcbsp_ick",
|
|
.id = 4,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp4_fck = {
|
|
.name = "mcbsp_fck",
|
|
.id = 4,
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp5_ick = {
|
|
.name = "mcbsp_ick",
|
|
.id = 5,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcbsp5_fck = {
|
|
.name = "mcbsp_fck",
|
|
.id = 5,
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcspi1_ick = {
|
|
.name = "mcspi_ick",
|
|
.id = 1,
|
|
.parent = &l4_ck,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcspi1_fck = {
|
|
.name = "mcspi_fck",
|
|
.id = 1,
|
|
.parent = &func_48m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcspi2_ick = {
|
|
.name = "mcspi_ick",
|
|
.id = 2,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcspi2_fck = {
|
|
.name = "mcspi_fck",
|
|
.id = 2,
|
|
.parent = &func_48m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcspi3_ick = {
|
|
.name = "mcspi_ick",
|
|
.id = 3,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mcspi3_fck = {
|
|
.name = "mcspi_fck",
|
|
.id = 3,
|
|
.parent = &func_48m_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk uart1_ick = {
|
|
.name = "uart1_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_UART1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk uart1_fck = {
|
|
.name = "uart1_fck",
|
|
.parent = &func_48m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_UART1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk uart2_ick = {
|
|
.name = "uart2_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_UART2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk uart2_fck = {
|
|
.name = "uart2_fck",
|
|
.parent = &func_48m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_UART2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk uart3_ick = {
|
|
.name = "uart3_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP24XX_EN_UART3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk uart3_fck = {
|
|
.name = "uart3_fck",
|
|
.parent = &func_48m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP24XX_EN_UART3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpios_ick = {
|
|
.name = "gpios_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpios_fck = {
|
|
.name = "gpios_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mpu_wdt_ick = {
|
|
.name = "mpu_wdt_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mpu_wdt_fck = {
|
|
.name = "mpu_wdt_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "wkup_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
|
|
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk sync_32k_ick = {
|
|
.name = "sync_32k_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
ENABLE_ON_INIT,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk wdt1_ick = {
|
|
.name = "wdt1_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP24XX_EN_WDT1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk omapctrl_ick = {
|
|
.name = "omapctrl_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
ENABLE_ON_INIT,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk icr_ick = {
|
|
.name = "icr_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
|
|
.enable_bit = OMAP2430_EN_ICR_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk cam_ick = {
|
|
.name = "cam_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_CAM_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
/*
|
|
* cam_fck controls both CAM_MCLK and CAM_FCLK. It should probably be
|
|
* split into two separate clocks, since the parent clocks are different
|
|
* and the clockdomains are also different.
|
|
*/
|
|
static struct clk cam_fck = {
|
|
.name = "cam_fck",
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_CAM_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mailboxes_ick = {
|
|
.name = "mailboxes_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk wdt4_ick = {
|
|
.name = "wdt4_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_WDT4_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk wdt4_fck = {
|
|
.name = "wdt4_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_WDT4_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk wdt3_ick = {
|
|
.name = "wdt3_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP2420_EN_WDT3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk wdt3_fck = {
|
|
.name = "wdt3_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP2420_EN_WDT3_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mspro_ick = {
|
|
.name = "mspro_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mspro_fck = {
|
|
.name = "mspro_fck",
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mmc_ick = {
|
|
.name = "mmc_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP2420_EN_MMC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mmc_fck = {
|
|
.name = "mmc_fck",
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP2420_EN_MMC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk fac_ick = {
|
|
.name = "fac_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_FAC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk fac_fck = {
|
|
.name = "fac_fck",
|
|
.parent = &func_12m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_FAC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk eac_ick = {
|
|
.name = "eac_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP2420_EN_EAC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk eac_fck = {
|
|
.name = "eac_fck",
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP2420_EN_EAC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk hdq_ick = {
|
|
.name = "hdq_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP24XX_EN_HDQ_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk hdq_fck = {
|
|
.name = "hdq_fck",
|
|
.parent = &func_12m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP24XX_EN_HDQ_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk i2c2_ick = {
|
|
.name = "i2c_ick",
|
|
.id = 2,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP2420_EN_I2C2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk i2c2_fck = {
|
|
.name = "i2c_fck",
|
|
.id = 2,
|
|
.parent = &func_12m_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP2420_EN_I2C2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk i2chs2_fck = {
|
|
.name = "i2chs_fck",
|
|
.id = 2,
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_I2CHS2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk i2c1_ick = {
|
|
.name = "i2c_ick",
|
|
.id = 1,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP2420_EN_I2C1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk i2c1_fck = {
|
|
.name = "i2c_fck",
|
|
.id = 1,
|
|
.parent = &func_12m_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP2420_EN_I2C1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk i2chs1_fck = {
|
|
.name = "i2chs_fck",
|
|
.id = 1,
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_I2CHS1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpmc_fck = {
|
|
.name = "gpmc_fck",
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
ENABLE_ON_INIT,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk sdma_fck = {
|
|
.name = "sdma_fck",
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk sdma_ick = {
|
|
.name = "sdma_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk vlynq_ick = {
|
|
.name = "vlynq_ick",
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
|
|
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static const struct clksel_rate vlynq_fck_96m_rates[] = {
|
|
{ .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel_rate vlynq_fck_core_rates[] = {
|
|
{ .div = 1, .val = 1, .flags = RATE_IN_242X },
|
|
{ .div = 2, .val = 2, .flags = RATE_IN_242X },
|
|
{ .div = 3, .val = 3, .flags = RATE_IN_242X },
|
|
{ .div = 4, .val = 4, .flags = RATE_IN_242X },
|
|
{ .div = 6, .val = 6, .flags = RATE_IN_242X },
|
|
{ .div = 8, .val = 8, .flags = RATE_IN_242X },
|
|
{ .div = 9, .val = 9, .flags = RATE_IN_242X },
|
|
{ .div = 12, .val = 12, .flags = RATE_IN_242X },
|
|
{ .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
|
|
{ .div = 18, .val = 18, .flags = RATE_IN_242X },
|
|
{ .div = 0 }
|
|
};
|
|
|
|
static const struct clksel vlynq_fck_clksel[] = {
|
|
{ .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
|
|
{ .parent = &core_ck, .rates = vlynq_fck_core_rates },
|
|
{ .parent = NULL }
|
|
};
|
|
|
|
static struct clk vlynq_fck = {
|
|
.name = "vlynq_fck",
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP242X | DELAYED_APP,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
|
|
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
|
|
.init = &omap2_init_clksel_parent,
|
|
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
|
|
.clksel_mask = OMAP2420_CLKSEL_VLYNQ_MASK,
|
|
.clksel = vlynq_fck_clksel,
|
|
.recalc = &omap2_clksel_recalc,
|
|
.round_rate = &omap2_clksel_round_rate,
|
|
.set_rate = &omap2_clksel_set_rate
|
|
};
|
|
|
|
static struct clk sdrc_ick = {
|
|
.name = "sdrc_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
|
|
.enable_bit = OMAP2430_EN_SDRC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk des_ick = {
|
|
.name = "des_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
|
|
.enable_bit = OMAP24XX_EN_DES_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk sha_ick = {
|
|
.name = "sha_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
|
|
.enable_bit = OMAP24XX_EN_SHA_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk rng_ick = {
|
|
.name = "rng_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
|
|
.enable_bit = OMAP24XX_EN_RNG_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk aes_ick = {
|
|
.name = "aes_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
|
|
.enable_bit = OMAP24XX_EN_AES_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk pka_ick = {
|
|
.name = "pka_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
|
|
.enable_bit = OMAP24XX_EN_PKA_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk usb_fck = {
|
|
.name = "usb_fck",
|
|
.parent = &func_48m_ck,
|
|
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP24XX_EN_USB_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk usbhs_ick = {
|
|
.name = "usbhs_ick",
|
|
.parent = &core_l3_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_USBHS_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mmchs1_ick = {
|
|
.name = "mmchs_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mmchs1_fck = {
|
|
.name = "mmchs_fck",
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l3_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mmchs2_ick = {
|
|
.name = "mmchs_ick",
|
|
.id = 1,
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mmchs2_fck = {
|
|
.name = "mmchs_fck",
|
|
.id = 1,
|
|
.parent = &func_96m_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpio5_ick = {
|
|
.name = "gpio5_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_GPIO5_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk gpio5_fck = {
|
|
.name = "gpio5_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_GPIO5_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mdm_intc_ick = {
|
|
.name = "mdm_intc_ick",
|
|
.parent = &l4_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
|
|
.enable_bit = OMAP2430_EN_MDM_INTC_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mmchsdb1_fck = {
|
|
.name = "mmchsdb_fck",
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
static struct clk mmchsdb2_fck = {
|
|
.name = "mmchsdb_fck",
|
|
.id = 1,
|
|
.parent = &func_32k_ck,
|
|
.flags = CLOCK_IN_OMAP243X,
|
|
.clkdm_name = "core_l4_clkdm",
|
|
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
|
|
.enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT,
|
|
.recalc = &followparent_recalc,
|
|
};
|
|
|
|
/*
|
|
* This clock is a composite clock which does entire set changes then
|
|
* forces a rebalance. It keys on the MPU speed, but it really could
|
|
* be any key speed part of a set in the rate table.
|
|
*
|
|
* to really change a set, you need memory table sets which get changed
|
|
* in sram, pre-notifiers & post notifiers, changing the top set, without
|
|
* having low level display recalc's won't work... this is why dpm notifiers
|
|
* work, isr's off, walk a list of clocks already _off_ and not messing with
|
|
* the bus.
|
|
*
|
|
* This clock should have no parent. It embodies the entire upper level
|
|
* active set. A parent will mess up some of the init also.
|
|
*/
|
|
static struct clk virt_prcm_set = {
|
|
.name = "virt_prcm_set",
|
|
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
|
|
VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
|
|
.parent = &mpu_ck, /* Indexed by mpu speed, no parent */
|
|
.recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */
|
|
.set_rate = &omap2_select_table_rate,
|
|
.round_rate = &omap2_round_to_table_rate,
|
|
};
|
|
|
|
static struct clk *onchip_24xx_clks[] __initdata = {
|
|
/* external root sources */
|
|
&func_32k_ck,
|
|
&osc_ck,
|
|
&sys_ck,
|
|
&alt_ck,
|
|
/* internal analog sources */
|
|
&dpll_ck,
|
|
&apll96_ck,
|
|
&apll54_ck,
|
|
/* internal prcm root sources */
|
|
&func_54m_ck,
|
|
&core_ck,
|
|
&func_96m_ck,
|
|
&func_48m_ck,
|
|
&func_12m_ck,
|
|
&wdt1_osc_ck,
|
|
&sys_clkout_src,
|
|
&sys_clkout,
|
|
&sys_clkout2_src,
|
|
&sys_clkout2,
|
|
&emul_ck,
|
|
/* mpu domain clocks */
|
|
&mpu_ck,
|
|
/* dsp domain clocks */
|
|
&dsp_fck,
|
|
&dsp_irate_ick,
|
|
&dsp_ick, /* 242x */
|
|
&iva2_1_ick, /* 243x */
|
|
&iva1_ifck, /* 242x */
|
|
&iva1_mpu_int_ifck, /* 242x */
|
|
/* GFX domain clocks */
|
|
&gfx_3d_fck,
|
|
&gfx_2d_fck,
|
|
&gfx_ick,
|
|
/* Modem domain clocks */
|
|
&mdm_ick,
|
|
&mdm_osc_ck,
|
|
/* DSS domain clocks */
|
|
&dss_ick,
|
|
&dss1_fck,
|
|
&dss2_fck,
|
|
&dss_54m_fck,
|
|
/* L3 domain clocks */
|
|
&core_l3_ck,
|
|
&ssi_ssr_sst_fck,
|
|
&usb_l4_ick,
|
|
/* L4 domain clocks */
|
|
&l4_ck, /* used as both core_l4 and wu_l4 */
|
|
/* virtual meta-group clock */
|
|
&virt_prcm_set,
|
|
/* general l4 interface ck, multi-parent functional clk */
|
|
&gpt1_ick,
|
|
&gpt1_fck,
|
|
&gpt2_ick,
|
|
&gpt2_fck,
|
|
&gpt3_ick,
|
|
&gpt3_fck,
|
|
&gpt4_ick,
|
|
&gpt4_fck,
|
|
&gpt5_ick,
|
|
&gpt5_fck,
|
|
&gpt6_ick,
|
|
&gpt6_fck,
|
|
&gpt7_ick,
|
|
&gpt7_fck,
|
|
&gpt8_ick,
|
|
&gpt8_fck,
|
|
&gpt9_ick,
|
|
&gpt9_fck,
|
|
&gpt10_ick,
|
|
&gpt10_fck,
|
|
&gpt11_ick,
|
|
&gpt11_fck,
|
|
&gpt12_ick,
|
|
&gpt12_fck,
|
|
&mcbsp1_ick,
|
|
&mcbsp1_fck,
|
|
&mcbsp2_ick,
|
|
&mcbsp2_fck,
|
|
&mcbsp3_ick,
|
|
&mcbsp3_fck,
|
|
&mcbsp4_ick,
|
|
&mcbsp4_fck,
|
|
&mcbsp5_ick,
|
|
&mcbsp5_fck,
|
|
&mcspi1_ick,
|
|
&mcspi1_fck,
|
|
&mcspi2_ick,
|
|
&mcspi2_fck,
|
|
&mcspi3_ick,
|
|
&mcspi3_fck,
|
|
&uart1_ick,
|
|
&uart1_fck,
|
|
&uart2_ick,
|
|
&uart2_fck,
|
|
&uart3_ick,
|
|
&uart3_fck,
|
|
&gpios_ick,
|
|
&gpios_fck,
|
|
&mpu_wdt_ick,
|
|
&mpu_wdt_fck,
|
|
&sync_32k_ick,
|
|
&wdt1_ick,
|
|
&omapctrl_ick,
|
|
&icr_ick,
|
|
&cam_fck,
|
|
&cam_ick,
|
|
&mailboxes_ick,
|
|
&wdt4_ick,
|
|
&wdt4_fck,
|
|
&wdt3_ick,
|
|
&wdt3_fck,
|
|
&mspro_ick,
|
|
&mspro_fck,
|
|
&mmc_ick,
|
|
&mmc_fck,
|
|
&fac_ick,
|
|
&fac_fck,
|
|
&eac_ick,
|
|
&eac_fck,
|
|
&hdq_ick,
|
|
&hdq_fck,
|
|
&i2c1_ick,
|
|
&i2c1_fck,
|
|
&i2chs1_fck,
|
|
&i2c2_ick,
|
|
&i2c2_fck,
|
|
&i2chs2_fck,
|
|
&gpmc_fck,
|
|
&sdma_fck,
|
|
&sdma_ick,
|
|
&vlynq_ick,
|
|
&vlynq_fck,
|
|
&sdrc_ick,
|
|
&des_ick,
|
|
&sha_ick,
|
|
&rng_ick,
|
|
&aes_ick,
|
|
&pka_ick,
|
|
&usb_fck,
|
|
&usbhs_ick,
|
|
&mmchs1_ick,
|
|
&mmchs1_fck,
|
|
&mmchs2_ick,
|
|
&mmchs2_fck,
|
|
&gpio5_ick,
|
|
&gpio5_fck,
|
|
&mdm_intc_ick,
|
|
&mmchsdb1_fck,
|
|
&mmchsdb2_fck,
|
|
};
|
|
|
|
#endif
|
|
|