![Grant Likely](/assets/img/avatar_default.png)
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
557 lines
15 KiB
C
557 lines
15 KiB
C
/*
|
|
* Xilinx SPI controller driver (master mode only)
|
|
*
|
|
* Author: MontaVista Software, Inc.
|
|
* source@mvista.com
|
|
*
|
|
* Copyright (c) 2010 Secret Lab Technologies, Ltd.
|
|
* Copyright (c) 2009 Intel Corporation
|
|
* 2002-2007 (c) MontaVista Software, Inc.
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
#include <linux/spi/xilinx_spi.h>
|
|
#include <linux/io.h>
|
|
|
|
#define XILINX_SPI_NAME "xilinx_spi"
|
|
|
|
/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
|
|
* Product Specification", DS464
|
|
*/
|
|
#define XSPI_CR_OFFSET 0x60 /* Control Register */
|
|
|
|
#define XSPI_CR_ENABLE 0x02
|
|
#define XSPI_CR_MASTER_MODE 0x04
|
|
#define XSPI_CR_CPOL 0x08
|
|
#define XSPI_CR_CPHA 0x10
|
|
#define XSPI_CR_MODE_MASK (XSPI_CR_CPHA | XSPI_CR_CPOL)
|
|
#define XSPI_CR_TXFIFO_RESET 0x20
|
|
#define XSPI_CR_RXFIFO_RESET 0x40
|
|
#define XSPI_CR_MANUAL_SSELECT 0x80
|
|
#define XSPI_CR_TRANS_INHIBIT 0x100
|
|
#define XSPI_CR_LSB_FIRST 0x200
|
|
|
|
#define XSPI_SR_OFFSET 0x64 /* Status Register */
|
|
|
|
#define XSPI_SR_RX_EMPTY_MASK 0x01 /* Receive FIFO is empty */
|
|
#define XSPI_SR_RX_FULL_MASK 0x02 /* Receive FIFO is full */
|
|
#define XSPI_SR_TX_EMPTY_MASK 0x04 /* Transmit FIFO is empty */
|
|
#define XSPI_SR_TX_FULL_MASK 0x08 /* Transmit FIFO is full */
|
|
#define XSPI_SR_MODE_FAULT_MASK 0x10 /* Mode fault error */
|
|
|
|
#define XSPI_TXD_OFFSET 0x68 /* Data Transmit Register */
|
|
#define XSPI_RXD_OFFSET 0x6c /* Data Receive Register */
|
|
|
|
#define XSPI_SSR_OFFSET 0x70 /* 32-bit Slave Select Register */
|
|
|
|
/* Register definitions as per "OPB IPIF (v3.01c) Product Specification", DS414
|
|
* IPIF registers are 32 bit
|
|
*/
|
|
#define XIPIF_V123B_DGIER_OFFSET 0x1c /* IPIF global int enable reg */
|
|
#define XIPIF_V123B_GINTR_ENABLE 0x80000000
|
|
|
|
#define XIPIF_V123B_IISR_OFFSET 0x20 /* IPIF interrupt status reg */
|
|
#define XIPIF_V123B_IIER_OFFSET 0x28 /* IPIF interrupt enable reg */
|
|
|
|
#define XSPI_INTR_MODE_FAULT 0x01 /* Mode fault error */
|
|
#define XSPI_INTR_SLAVE_MODE_FAULT 0x02 /* Selected as slave while
|
|
* disabled */
|
|
#define XSPI_INTR_TX_EMPTY 0x04 /* TxFIFO is empty */
|
|
#define XSPI_INTR_TX_UNDERRUN 0x08 /* TxFIFO was underrun */
|
|
#define XSPI_INTR_RX_FULL 0x10 /* RxFIFO is full */
|
|
#define XSPI_INTR_RX_OVERRUN 0x20 /* RxFIFO was overrun */
|
|
#define XSPI_INTR_TX_HALF_EMPTY 0x40 /* TxFIFO is half empty */
|
|
|
|
#define XIPIF_V123B_RESETR_OFFSET 0x40 /* IPIF reset register */
|
|
#define XIPIF_V123B_RESET_MASK 0x0a /* the value to write */
|
|
|
|
struct xilinx_spi {
|
|
/* bitbang has to be first */
|
|
struct spi_bitbang bitbang;
|
|
struct completion done;
|
|
struct resource mem; /* phys mem */
|
|
void __iomem *regs; /* virt. address of the control registers */
|
|
|
|
u32 irq;
|
|
|
|
u8 *rx_ptr; /* pointer in the Tx buffer */
|
|
const u8 *tx_ptr; /* pointer in the Rx buffer */
|
|
int remaining_bytes; /* the number of bytes left to transfer */
|
|
u8 bits_per_word;
|
|
unsigned int (*read_fn) (void __iomem *);
|
|
void (*write_fn) (u32, void __iomem *);
|
|
void (*tx_fn) (struct xilinx_spi *);
|
|
void (*rx_fn) (struct xilinx_spi *);
|
|
};
|
|
|
|
static void xspi_write32(u32 val, void __iomem *addr)
|
|
{
|
|
iowrite32(val, addr);
|
|
}
|
|
|
|
static unsigned int xspi_read32(void __iomem *addr)
|
|
{
|
|
return ioread32(addr);
|
|
}
|
|
|
|
static void xspi_write32_be(u32 val, void __iomem *addr)
|
|
{
|
|
iowrite32be(val, addr);
|
|
}
|
|
|
|
static unsigned int xspi_read32_be(void __iomem *addr)
|
|
{
|
|
return ioread32be(addr);
|
|
}
|
|
|
|
static void xspi_tx8(struct xilinx_spi *xspi)
|
|
{
|
|
xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET);
|
|
xspi->tx_ptr++;
|
|
}
|
|
|
|
static void xspi_tx16(struct xilinx_spi *xspi)
|
|
{
|
|
xspi->write_fn(*(u16 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
|
|
xspi->tx_ptr += 2;
|
|
}
|
|
|
|
static void xspi_tx32(struct xilinx_spi *xspi)
|
|
{
|
|
xspi->write_fn(*(u32 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
|
|
xspi->tx_ptr += 4;
|
|
}
|
|
|
|
static void xspi_rx8(struct xilinx_spi *xspi)
|
|
{
|
|
u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
|
|
if (xspi->rx_ptr) {
|
|
*xspi->rx_ptr = data & 0xff;
|
|
xspi->rx_ptr++;
|
|
}
|
|
}
|
|
|
|
static void xspi_rx16(struct xilinx_spi *xspi)
|
|
{
|
|
u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
|
|
if (xspi->rx_ptr) {
|
|
*(u16 *)(xspi->rx_ptr) = data & 0xffff;
|
|
xspi->rx_ptr += 2;
|
|
}
|
|
}
|
|
|
|
static void xspi_rx32(struct xilinx_spi *xspi)
|
|
{
|
|
u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
|
|
if (xspi->rx_ptr) {
|
|
*(u32 *)(xspi->rx_ptr) = data;
|
|
xspi->rx_ptr += 4;
|
|
}
|
|
}
|
|
|
|
static void xspi_init_hw(struct xilinx_spi *xspi)
|
|
{
|
|
void __iomem *regs_base = xspi->regs;
|
|
|
|
/* Reset the SPI device */
|
|
xspi->write_fn(XIPIF_V123B_RESET_MASK,
|
|
regs_base + XIPIF_V123B_RESETR_OFFSET);
|
|
/* Disable all the interrupts just in case */
|
|
xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET);
|
|
/* Enable the global IPIF interrupt */
|
|
xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
|
|
regs_base + XIPIF_V123B_DGIER_OFFSET);
|
|
/* Deselect the slave on the SPI bus */
|
|
xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET);
|
|
/* Disable the transmitter, enable Manual Slave Select Assertion,
|
|
* put SPI controller into master mode, and enable it */
|
|
xspi->write_fn(XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT |
|
|
XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE | XSPI_CR_TXFIFO_RESET |
|
|
XSPI_CR_RXFIFO_RESET, regs_base + XSPI_CR_OFFSET);
|
|
}
|
|
|
|
static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
|
|
{
|
|
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
|
|
|
|
if (is_on == BITBANG_CS_INACTIVE) {
|
|
/* Deselect the slave on the SPI bus */
|
|
xspi->write_fn(0xffff, xspi->regs + XSPI_SSR_OFFSET);
|
|
} else if (is_on == BITBANG_CS_ACTIVE) {
|
|
/* Set the SPI clock phase and polarity */
|
|
u16 cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET)
|
|
& ~XSPI_CR_MODE_MASK;
|
|
if (spi->mode & SPI_CPHA)
|
|
cr |= XSPI_CR_CPHA;
|
|
if (spi->mode & SPI_CPOL)
|
|
cr |= XSPI_CR_CPOL;
|
|
xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
|
|
|
|
/* We do not check spi->max_speed_hz here as the SPI clock
|
|
* frequency is not software programmable (the IP block design
|
|
* parameter)
|
|
*/
|
|
|
|
/* Activate the chip select */
|
|
xspi->write_fn(~(0x0001 << spi->chip_select),
|
|
xspi->regs + XSPI_SSR_OFFSET);
|
|
}
|
|
}
|
|
|
|
/* spi_bitbang requires custom setup_transfer() to be defined if there is a
|
|
* custom txrx_bufs(). We have nothing to setup here as the SPI IP block
|
|
* supports 8 or 16 bits per word which cannot be changed in software.
|
|
* SPI clock can't be changed in software either.
|
|
* Check for correct bits per word. Chip select delay calculations could be
|
|
* added here as soon as bitbang_work() can be made aware of the delay value.
|
|
*/
|
|
static int xilinx_spi_setup_transfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
|
|
u8 bits_per_word;
|
|
|
|
bits_per_word = (t && t->bits_per_word)
|
|
? t->bits_per_word : spi->bits_per_word;
|
|
if (bits_per_word != xspi->bits_per_word) {
|
|
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
|
|
__func__, bits_per_word);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xilinx_spi_setup(struct spi_device *spi)
|
|
{
|
|
/* always return 0, we can not check the number of bits.
|
|
* There are cases when SPI setup is called before any driver is
|
|
* there, in that case the SPI core defaults to 8 bits, which we
|
|
* do not support in some cases. But if we return an error, the
|
|
* SPI device would not be registered and no driver can get hold of it
|
|
* When the driver is there, it will call SPI setup again with the
|
|
* correct number of bits per transfer.
|
|
* If a driver setups with the wrong bit number, it will fail when
|
|
* it tries to do a transfer
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
|
|
{
|
|
u8 sr;
|
|
|
|
/* Fill the Tx FIFO with as many bytes as possible */
|
|
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
|
|
while ((sr & XSPI_SR_TX_FULL_MASK) == 0 && xspi->remaining_bytes > 0) {
|
|
if (xspi->tx_ptr)
|
|
xspi->tx_fn(xspi);
|
|
else
|
|
xspi->write_fn(0, xspi->regs + XSPI_TXD_OFFSET);
|
|
xspi->remaining_bytes -= xspi->bits_per_word / 8;
|
|
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
|
|
}
|
|
}
|
|
|
|
static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
|
|
u32 ipif_ier;
|
|
u16 cr;
|
|
|
|
/* We get here with transmitter inhibited */
|
|
|
|
xspi->tx_ptr = t->tx_buf;
|
|
xspi->rx_ptr = t->rx_buf;
|
|
xspi->remaining_bytes = t->len;
|
|
INIT_COMPLETION(xspi->done);
|
|
|
|
xilinx_spi_fill_tx_fifo(xspi);
|
|
|
|
/* Enable the transmit empty interrupt, which we use to determine
|
|
* progress on the transmission.
|
|
*/
|
|
ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET);
|
|
xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY,
|
|
xspi->regs + XIPIF_V123B_IIER_OFFSET);
|
|
|
|
/* Start the transfer by not inhibiting the transmitter any longer */
|
|
cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) &
|
|
~XSPI_CR_TRANS_INHIBIT;
|
|
xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
|
|
|
|
wait_for_completion(&xspi->done);
|
|
|
|
/* Disable the transmit empty interrupt */
|
|
xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET);
|
|
|
|
return t->len - xspi->remaining_bytes;
|
|
}
|
|
|
|
|
|
/* This driver supports single master mode only. Hence Tx FIFO Empty
|
|
* is the only interrupt we care about.
|
|
* Receive FIFO Overrun, Transmit FIFO Underrun, Mode Fault, and Slave Mode
|
|
* Fault are not to happen.
|
|
*/
|
|
static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
|
|
{
|
|
struct xilinx_spi *xspi = dev_id;
|
|
u32 ipif_isr;
|
|
|
|
/* Get the IPIF interrupts, and clear them immediately */
|
|
ipif_isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET);
|
|
xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET);
|
|
|
|
if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */
|
|
u16 cr;
|
|
u8 sr;
|
|
|
|
/* A transmit has just completed. Process received data and
|
|
* check for more data to transmit. Always inhibit the
|
|
* transmitter while the Isr refills the transmit register/FIFO,
|
|
* or make sure it is stopped if we're done.
|
|
*/
|
|
cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
|
|
xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
|
|
xspi->regs + XSPI_CR_OFFSET);
|
|
|
|
/* Read out all the data from the Rx FIFO */
|
|
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
|
|
while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
|
|
xspi->rx_fn(xspi);
|
|
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
|
|
}
|
|
|
|
/* See if there is more data to send */
|
|
if (xspi->remaining_bytes > 0) {
|
|
xilinx_spi_fill_tx_fifo(xspi);
|
|
/* Start the transfer by not inhibiting the
|
|
* transmitter any longer
|
|
*/
|
|
xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
|
|
} else {
|
|
/* No more data to send.
|
|
* Indicate the transfer is completed.
|
|
*/
|
|
complete(&xspi->done);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct of_device_id xilinx_spi_of_match[] = {
|
|
{ .compatible = "xlnx,xps-spi-2.00.a", },
|
|
{ .compatible = "xlnx,xps-spi-2.00.b", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
|
|
|
|
struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
|
|
u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word)
|
|
{
|
|
struct spi_master *master;
|
|
struct xilinx_spi *xspi;
|
|
int ret;
|
|
|
|
master = spi_alloc_master(dev, sizeof(struct xilinx_spi));
|
|
if (!master)
|
|
return NULL;
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA;
|
|
|
|
xspi = spi_master_get_devdata(master);
|
|
xspi->bitbang.master = spi_master_get(master);
|
|
xspi->bitbang.chipselect = xilinx_spi_chipselect;
|
|
xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
|
|
xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
|
|
xspi->bitbang.master->setup = xilinx_spi_setup;
|
|
init_completion(&xspi->done);
|
|
|
|
if (!request_mem_region(mem->start, resource_size(mem),
|
|
XILINX_SPI_NAME))
|
|
goto put_master;
|
|
|
|
xspi->regs = ioremap(mem->start, resource_size(mem));
|
|
if (xspi->regs == NULL) {
|
|
dev_warn(dev, "ioremap failure\n");
|
|
goto map_failed;
|
|
}
|
|
|
|
master->bus_num = bus_num;
|
|
master->num_chipselect = num_cs;
|
|
master->dev.of_node = dev->of_node;
|
|
|
|
xspi->mem = *mem;
|
|
xspi->irq = irq;
|
|
if (little_endian) {
|
|
xspi->read_fn = xspi_read32;
|
|
xspi->write_fn = xspi_write32;
|
|
} else {
|
|
xspi->read_fn = xspi_read32_be;
|
|
xspi->write_fn = xspi_write32_be;
|
|
}
|
|
xspi->bits_per_word = bits_per_word;
|
|
if (xspi->bits_per_word == 8) {
|
|
xspi->tx_fn = xspi_tx8;
|
|
xspi->rx_fn = xspi_rx8;
|
|
} else if (xspi->bits_per_word == 16) {
|
|
xspi->tx_fn = xspi_tx16;
|
|
xspi->rx_fn = xspi_rx16;
|
|
} else if (xspi->bits_per_word == 32) {
|
|
xspi->tx_fn = xspi_tx32;
|
|
xspi->rx_fn = xspi_rx32;
|
|
} else
|
|
goto unmap_io;
|
|
|
|
|
|
/* SPI controller initializations */
|
|
xspi_init_hw(xspi);
|
|
|
|
/* Register for SPI Interrupt */
|
|
ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
|
|
if (ret)
|
|
goto unmap_io;
|
|
|
|
ret = spi_bitbang_start(&xspi->bitbang);
|
|
if (ret) {
|
|
dev_err(dev, "spi_bitbang_start FAILED\n");
|
|
goto free_irq;
|
|
}
|
|
|
|
dev_info(dev, "at 0x%08llX mapped to 0x%p, irq=%d\n",
|
|
(unsigned long long)mem->start, xspi->regs, xspi->irq);
|
|
return master;
|
|
|
|
free_irq:
|
|
free_irq(xspi->irq, xspi);
|
|
unmap_io:
|
|
iounmap(xspi->regs);
|
|
map_failed:
|
|
release_mem_region(mem->start, resource_size(mem));
|
|
put_master:
|
|
spi_master_put(master);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(xilinx_spi_init);
|
|
|
|
void xilinx_spi_deinit(struct spi_master *master)
|
|
{
|
|
struct xilinx_spi *xspi;
|
|
|
|
xspi = spi_master_get_devdata(master);
|
|
|
|
spi_bitbang_stop(&xspi->bitbang);
|
|
free_irq(xspi->irq, xspi);
|
|
iounmap(xspi->regs);
|
|
|
|
release_mem_region(xspi->mem.start, resource_size(&xspi->mem));
|
|
spi_master_put(xspi->bitbang.master);
|
|
}
|
|
EXPORT_SYMBOL(xilinx_spi_deinit);
|
|
|
|
static int __devinit xilinx_spi_probe(struct platform_device *dev)
|
|
{
|
|
struct xspi_platform_data *pdata;
|
|
struct resource *r;
|
|
int irq, num_cs = 0, little_endian = 0, bits_per_word = 8;
|
|
struct spi_master *master;
|
|
u8 i;
|
|
|
|
pdata = dev->dev.platform_data;
|
|
if (pdata) {
|
|
num_cs = pdata->num_chipselect;
|
|
little_endian = pdata->little_endian;
|
|
bits_per_word = pdata->bits_per_word;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
if (dev->dev.of_node) {
|
|
const __be32 *prop;
|
|
int len;
|
|
|
|
/* number of slave select bits is required */
|
|
prop = of_get_property(dev->dev.of_node, "xlnx,num-ss-bits",
|
|
&len);
|
|
if (prop && len >= sizeof(*prop))
|
|
num_cs = __be32_to_cpup(prop);
|
|
}
|
|
#endif
|
|
|
|
if (!num_cs) {
|
|
dev_err(&dev->dev, "Missing slave select configuration data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (!r)
|
|
return -ENODEV;
|
|
|
|
irq = platform_get_irq(dev, 0);
|
|
if (irq < 0)
|
|
return -ENXIO;
|
|
|
|
master = xilinx_spi_init(&dev->dev, r, irq, dev->id, num_cs,
|
|
little_endian, bits_per_word);
|
|
if (!master)
|
|
return -ENODEV;
|
|
|
|
if (pdata) {
|
|
for (i = 0; i < pdata->num_devices; i++)
|
|
spi_new_device(master, pdata->devices + i);
|
|
}
|
|
|
|
platform_set_drvdata(dev, master);
|
|
return 0;
|
|
}
|
|
|
|
static int __devexit xilinx_spi_remove(struct platform_device *dev)
|
|
{
|
|
xilinx_spi_deinit(platform_get_drvdata(dev));
|
|
platform_set_drvdata(dev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:" XILINX_SPI_NAME);
|
|
|
|
static struct platform_driver xilinx_spi_driver = {
|
|
.probe = xilinx_spi_probe,
|
|
.remove = __devexit_p(xilinx_spi_remove),
|
|
.driver = {
|
|
.name = XILINX_SPI_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = xilinx_spi_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init xilinx_spi_pltfm_init(void)
|
|
{
|
|
return platform_driver_register(&xilinx_spi_driver);
|
|
}
|
|
module_init(xilinx_spi_pltfm_init);
|
|
|
|
static void __exit xilinx_spi_pltfm_exit(void)
|
|
{
|
|
platform_driver_unregister(&xilinx_spi_driver);
|
|
}
|
|
module_exit(xilinx_spi_pltfm_exit);
|
|
|
|
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
|
|
MODULE_DESCRIPTION("Xilinx SPI driver");
|
|
MODULE_LICENSE("GPL");
|