70764a9057
The s3c6410 sdhci controller does not support the 'End' attribute and NOP attribute in the same 8-Byte ADMA descriptor. This patch adds a new quirk to identify sdhci host contollers with such behaviour. In addition to this, for controllers using the new quirk, the last entry in the ADMA descritor table is marked with the 'End' attribute (instead of using a NOP descriptor with 'End' attribute). Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
419 lines
13 KiB
C
419 lines
13 KiB
C
/*
|
|
* linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
|
|
*
|
|
* Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*/
|
|
#ifndef __SDHCI_H
|
|
#define __SDHCI_H
|
|
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/types.h>
|
|
#include <linux/io.h>
|
|
|
|
/*
|
|
* Controller registers
|
|
*/
|
|
|
|
#define SDHCI_DMA_ADDRESS 0x00
|
|
|
|
#define SDHCI_BLOCK_SIZE 0x04
|
|
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
|
|
|
|
#define SDHCI_BLOCK_COUNT 0x06
|
|
|
|
#define SDHCI_ARGUMENT 0x08
|
|
|
|
#define SDHCI_TRANSFER_MODE 0x0C
|
|
#define SDHCI_TRNS_DMA 0x01
|
|
#define SDHCI_TRNS_BLK_CNT_EN 0x02
|
|
#define SDHCI_TRNS_ACMD12 0x04
|
|
#define SDHCI_TRNS_READ 0x10
|
|
#define SDHCI_TRNS_MULTI 0x20
|
|
|
|
#define SDHCI_COMMAND 0x0E
|
|
#define SDHCI_CMD_RESP_MASK 0x03
|
|
#define SDHCI_CMD_CRC 0x08
|
|
#define SDHCI_CMD_INDEX 0x10
|
|
#define SDHCI_CMD_DATA 0x20
|
|
|
|
#define SDHCI_CMD_RESP_NONE 0x00
|
|
#define SDHCI_CMD_RESP_LONG 0x01
|
|
#define SDHCI_CMD_RESP_SHORT 0x02
|
|
#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
|
|
|
|
#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
|
|
|
|
#define SDHCI_RESPONSE 0x10
|
|
|
|
#define SDHCI_BUFFER 0x20
|
|
|
|
#define SDHCI_PRESENT_STATE 0x24
|
|
#define SDHCI_CMD_INHIBIT 0x00000001
|
|
#define SDHCI_DATA_INHIBIT 0x00000002
|
|
#define SDHCI_DOING_WRITE 0x00000100
|
|
#define SDHCI_DOING_READ 0x00000200
|
|
#define SDHCI_SPACE_AVAILABLE 0x00000400
|
|
#define SDHCI_DATA_AVAILABLE 0x00000800
|
|
#define SDHCI_CARD_PRESENT 0x00010000
|
|
#define SDHCI_WRITE_PROTECT 0x00080000
|
|
|
|
#define SDHCI_HOST_CONTROL 0x28
|
|
#define SDHCI_CTRL_LED 0x01
|
|
#define SDHCI_CTRL_4BITBUS 0x02
|
|
#define SDHCI_CTRL_HISPD 0x04
|
|
#define SDHCI_CTRL_DMA_MASK 0x18
|
|
#define SDHCI_CTRL_SDMA 0x00
|
|
#define SDHCI_CTRL_ADMA1 0x08
|
|
#define SDHCI_CTRL_ADMA32 0x10
|
|
#define SDHCI_CTRL_ADMA64 0x18
|
|
|
|
#define SDHCI_POWER_CONTROL 0x29
|
|
#define SDHCI_POWER_ON 0x01
|
|
#define SDHCI_POWER_180 0x0A
|
|
#define SDHCI_POWER_300 0x0C
|
|
#define SDHCI_POWER_330 0x0E
|
|
|
|
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
|
|
|
|
#define SDHCI_WAKE_UP_CONTROL 0x2B
|
|
|
|
#define SDHCI_CLOCK_CONTROL 0x2C
|
|
#define SDHCI_DIVIDER_SHIFT 8
|
|
#define SDHCI_CLOCK_CARD_EN 0x0004
|
|
#define SDHCI_CLOCK_INT_STABLE 0x0002
|
|
#define SDHCI_CLOCK_INT_EN 0x0001
|
|
|
|
#define SDHCI_TIMEOUT_CONTROL 0x2E
|
|
|
|
#define SDHCI_SOFTWARE_RESET 0x2F
|
|
#define SDHCI_RESET_ALL 0x01
|
|
#define SDHCI_RESET_CMD 0x02
|
|
#define SDHCI_RESET_DATA 0x04
|
|
|
|
#define SDHCI_INT_STATUS 0x30
|
|
#define SDHCI_INT_ENABLE 0x34
|
|
#define SDHCI_SIGNAL_ENABLE 0x38
|
|
#define SDHCI_INT_RESPONSE 0x00000001
|
|
#define SDHCI_INT_DATA_END 0x00000002
|
|
#define SDHCI_INT_DMA_END 0x00000008
|
|
#define SDHCI_INT_SPACE_AVAIL 0x00000010
|
|
#define SDHCI_INT_DATA_AVAIL 0x00000020
|
|
#define SDHCI_INT_CARD_INSERT 0x00000040
|
|
#define SDHCI_INT_CARD_REMOVE 0x00000080
|
|
#define SDHCI_INT_CARD_INT 0x00000100
|
|
#define SDHCI_INT_ERROR 0x00008000
|
|
#define SDHCI_INT_TIMEOUT 0x00010000
|
|
#define SDHCI_INT_CRC 0x00020000
|
|
#define SDHCI_INT_END_BIT 0x00040000
|
|
#define SDHCI_INT_INDEX 0x00080000
|
|
#define SDHCI_INT_DATA_TIMEOUT 0x00100000
|
|
#define SDHCI_INT_DATA_CRC 0x00200000
|
|
#define SDHCI_INT_DATA_END_BIT 0x00400000
|
|
#define SDHCI_INT_BUS_POWER 0x00800000
|
|
#define SDHCI_INT_ACMD12ERR 0x01000000
|
|
#define SDHCI_INT_ADMA_ERROR 0x02000000
|
|
|
|
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
|
|
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
|
|
|
|
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
|
|
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
|
|
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
|
|
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
|
|
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
|
|
SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
|
|
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
|
|
|
|
#define SDHCI_ACMD12_ERR 0x3C
|
|
|
|
/* 3E-3F reserved */
|
|
|
|
#define SDHCI_CAPABILITIES 0x40
|
|
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
|
|
#define SDHCI_TIMEOUT_CLK_SHIFT 0
|
|
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
|
|
#define SDHCI_CLOCK_BASE_MASK 0x00003F00
|
|
#define SDHCI_CLOCK_BASE_SHIFT 8
|
|
#define SDHCI_MAX_BLOCK_MASK 0x00030000
|
|
#define SDHCI_MAX_BLOCK_SHIFT 16
|
|
#define SDHCI_CAN_DO_ADMA2 0x00080000
|
|
#define SDHCI_CAN_DO_ADMA1 0x00100000
|
|
#define SDHCI_CAN_DO_HISPD 0x00200000
|
|
#define SDHCI_CAN_DO_SDMA 0x00400000
|
|
#define SDHCI_CAN_VDD_330 0x01000000
|
|
#define SDHCI_CAN_VDD_300 0x02000000
|
|
#define SDHCI_CAN_VDD_180 0x04000000
|
|
#define SDHCI_CAN_64BIT 0x10000000
|
|
|
|
/* 44-47 reserved for more caps */
|
|
|
|
#define SDHCI_MAX_CURRENT 0x48
|
|
|
|
/* 4C-4F reserved for more max current */
|
|
|
|
#define SDHCI_SET_ACMD12_ERROR 0x50
|
|
#define SDHCI_SET_INT_ERROR 0x52
|
|
|
|
#define SDHCI_ADMA_ERROR 0x54
|
|
|
|
/* 55-57 reserved */
|
|
|
|
#define SDHCI_ADMA_ADDRESS 0x58
|
|
|
|
/* 60-FB reserved */
|
|
|
|
#define SDHCI_SLOT_INT_STATUS 0xFC
|
|
|
|
#define SDHCI_HOST_VERSION 0xFE
|
|
#define SDHCI_VENDOR_VER_MASK 0xFF00
|
|
#define SDHCI_VENDOR_VER_SHIFT 8
|
|
#define SDHCI_SPEC_VER_MASK 0x00FF
|
|
#define SDHCI_SPEC_VER_SHIFT 0
|
|
#define SDHCI_SPEC_100 0
|
|
#define SDHCI_SPEC_200 1
|
|
|
|
struct sdhci_ops;
|
|
|
|
struct sdhci_host {
|
|
/* Data set by hardware interface driver */
|
|
const char *hw_name; /* Hardware bus name */
|
|
|
|
unsigned int quirks; /* Deviations from spec. */
|
|
|
|
/* Controller doesn't honor resets unless we touch the clock register */
|
|
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
|
|
/* Controller has bad caps bits, but really supports DMA */
|
|
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
|
|
/* Controller doesn't like to be reset when there is no card inserted. */
|
|
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
|
|
/* Controller doesn't like clearing the power reg before a change */
|
|
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
|
|
/* Controller has flaky internal state so reset it on each ios change */
|
|
#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
|
|
/* Controller has an unusable DMA engine */
|
|
#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
|
|
/* Controller has an unusable ADMA engine */
|
|
#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
|
|
/* Controller can only DMA from 32-bit aligned addresses */
|
|
#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
|
|
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
|
|
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
|
|
/* Controller can only ADMA chunks that are a multiple of 32 bits */
|
|
#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
|
|
/* Controller needs to be reset after each request to stay stable */
|
|
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
|
|
/* Controller needs voltage and power writes to happen separately */
|
|
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
|
|
/* Controller provides an incorrect timeout value for transfers */
|
|
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
|
|
/* Controller has an issue with buffer bits for small transfers */
|
|
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
|
|
/* Controller does not provide transfer-complete interrupt when not busy */
|
|
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
|
|
/* Controller has unreliable card detection */
|
|
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
|
|
/* Controller reports inverted write-protect state */
|
|
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
|
|
/* Controller has nonstandard clock management */
|
|
#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
|
|
/* Controller does not like fast PIO transfers */
|
|
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
|
|
/* Controller losing signal/interrupt enable states after reset */
|
|
#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
|
|
/* Controller has to be forced to use block size of 2048 bytes */
|
|
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
|
|
/* Controller cannot do multi-block transfers */
|
|
#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
|
|
/* Controller can only handle 1-bit data transfers */
|
|
#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
|
|
/* Controller needs 10ms delay between applying power and clock */
|
|
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
|
|
/* Controller uses SDCLK instead of TMCLK for data timeouts */
|
|
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
|
|
/* Controller reports wrong base clock capability */
|
|
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
|
|
/* Controller cannot support End Attribute in NOP ADMA descriptor */
|
|
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
|
|
|
|
int irq; /* Device IRQ */
|
|
void __iomem * ioaddr; /* Mapped address */
|
|
|
|
const struct sdhci_ops *ops; /* Low level hw interface */
|
|
|
|
/* Internal data */
|
|
struct mmc_host *mmc; /* MMC structure */
|
|
u64 dma_mask; /* custom DMA mask */
|
|
|
|
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
|
|
struct led_classdev led; /* LED control */
|
|
char led_name[32];
|
|
#endif
|
|
|
|
spinlock_t lock; /* Mutex */
|
|
|
|
int flags; /* Host attributes */
|
|
#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
|
|
#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
|
|
#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
|
|
#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
|
|
|
|
unsigned int version; /* SDHCI spec. version */
|
|
|
|
unsigned int max_clk; /* Max possible freq (MHz) */
|
|
unsigned int timeout_clk; /* Timeout freq (KHz) */
|
|
|
|
unsigned int clock; /* Current clock (MHz) */
|
|
u8 pwr; /* Current voltage */
|
|
|
|
struct mmc_request *mrq; /* Current request */
|
|
struct mmc_command *cmd; /* Current command */
|
|
struct mmc_data *data; /* Current data request */
|
|
unsigned int data_early:1; /* Data finished before cmd */
|
|
|
|
struct sg_mapping_iter sg_miter; /* SG state for PIO */
|
|
unsigned int blocks; /* remaining PIO blocks */
|
|
|
|
int sg_count; /* Mapped sg entries */
|
|
|
|
u8 *adma_desc; /* ADMA descriptor table */
|
|
u8 *align_buffer; /* Bounce buffer */
|
|
|
|
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
|
|
dma_addr_t align_addr; /* Mapped bounce buffer */
|
|
|
|
struct tasklet_struct card_tasklet; /* Tasklet structures */
|
|
struct tasklet_struct finish_tasklet;
|
|
|
|
struct timer_list timer; /* Timer for timeouts */
|
|
|
|
unsigned long private[0] ____cacheline_aligned;
|
|
};
|
|
|
|
|
|
struct sdhci_ops {
|
|
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
|
|
u32 (*read_l)(struct sdhci_host *host, int reg);
|
|
u16 (*read_w)(struct sdhci_host *host, int reg);
|
|
u8 (*read_b)(struct sdhci_host *host, int reg);
|
|
void (*write_l)(struct sdhci_host *host, u32 val, int reg);
|
|
void (*write_w)(struct sdhci_host *host, u16 val, int reg);
|
|
void (*write_b)(struct sdhci_host *host, u8 val, int reg);
|
|
#endif
|
|
|
|
void (*set_clock)(struct sdhci_host *host, unsigned int clock);
|
|
|
|
int (*enable_dma)(struct sdhci_host *host);
|
|
unsigned int (*get_max_clock)(struct sdhci_host *host);
|
|
unsigned int (*get_min_clock)(struct sdhci_host *host);
|
|
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
|
|
};
|
|
|
|
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
|
|
|
|
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
if (unlikely(host->ops->write_l))
|
|
host->ops->write_l(host, val, reg);
|
|
else
|
|
writel(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
if (unlikely(host->ops->write_w))
|
|
host->ops->write_w(host, val, reg);
|
|
else
|
|
writew(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
if (unlikely(host->ops->write_b))
|
|
host->ops->write_b(host, val, reg);
|
|
else
|
|
writeb(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(host->ops->read_l))
|
|
return host->ops->read_l(host, reg);
|
|
else
|
|
return readl(host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(host->ops->read_w))
|
|
return host->ops->read_w(host, reg);
|
|
else
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(host->ops->read_b))
|
|
return host->ops->read_b(host, reg);
|
|
else
|
|
return readb(host->ioaddr + reg);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
writel(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
writew(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
writeb(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
return readl(host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
return readb(host->ioaddr + reg);
|
|
}
|
|
|
|
#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
|
|
|
|
extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
|
|
size_t priv_size);
|
|
extern void sdhci_free_host(struct sdhci_host *host);
|
|
|
|
static inline void *sdhci_priv(struct sdhci_host *host)
|
|
{
|
|
return (void *)host->private;
|
|
}
|
|
|
|
extern int sdhci_add_host(struct sdhci_host *host);
|
|
extern void sdhci_remove_host(struct sdhci_host *host, int dead);
|
|
|
|
#ifdef CONFIG_PM
|
|
extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
|
|
extern int sdhci_resume_host(struct sdhci_host *host);
|
|
#endif
|
|
|
|
#endif /* __SDHCI_H */
|