Archived
14
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/arch/ppc64/kernel/signal32.c
Steven Rostedt 69be8f1896 [PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it.  I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.

The way NODEFER affects signals on other Unix boxes is as follows:

1) If NODEFER is set, other signals in sa_mask are still blocked.

2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).

The way NODEFER affects signals on Linux:

1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).

2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.

The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.

Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.

* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux.  So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 10:03:11 -07:00

991 lines
28 KiB
C

/*
* signal32.c: Support 32bit signal syscalls.
*
* Copyright (C) 2001 IBM
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*
* These routines maintain argument size conversion between 32bit and 64bit
* environment.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/syscalls.h>
#include <linux/errno.h>
#include <linux/elf.h>
#include <linux/compat.h>
#include <linux/ptrace.h>
#include <asm/ppc32.h>
#include <asm/uaccess.h>
#include <asm/ppcdebug.h>
#include <asm/unistd.h>
#include <asm/cacheflush.h>
#include <asm/vdso.h>
#define DEBUG_SIG 0
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
#define GP_REGS_SIZE32 min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32))
/*
* When we have signals to deliver, we set up on the
* user stack, going down from the original stack pointer:
* a sigregs32 struct
* a sigcontext32 struct
* a gap of __SIGNAL_FRAMESIZE32 bytes
*
* Each of these things must be a multiple of 16 bytes in size.
*
*/
struct sigregs32 {
struct mcontext32 mctx; /* all the register values */
/*
* Programs using the rs6000/xcoff abi can save up to 19 gp
* regs and 18 fp regs below sp before decrementing it.
*/
int abigap[56];
};
/* We use the mc_pad field for the signal return trampoline. */
#define tramp mc_pad
/*
* When we have rt signals to deliver, we set up on the
* user stack, going down from the original stack pointer:
* one rt_sigframe32 struct (siginfo + ucontext + ABI gap)
* a gap of __SIGNAL_FRAMESIZE32+16 bytes
* (the +16 is to get the siginfo and ucontext32 in the same
* positions as in older kernels).
*
* Each of these things must be a multiple of 16 bytes in size.
*
*/
struct rt_sigframe32 {
compat_siginfo_t info;
struct ucontext32 uc;
/*
* Programs using the rs6000/xcoff abi can save up to 19 gp
* regs and 18 fp regs below sp before decrementing it.
*/
int abigap[56];
};
/*
* Common utility functions used by signal and context support
*
*/
/*
* Restore the user process's signal mask
* (implemented in signal.c)
*/
extern void restore_sigmask(sigset_t *set);
/*
* Functions for flipping sigsets (thanks to brain dead generic
* implementation that makes things simple for little endian only
*/
static inline void compat_from_sigset(compat_sigset_t *compat, sigset_t *set)
{
switch (_NSIG_WORDS) {
case 4: compat->sig[5] = set->sig[3] & 0xffffffffull ;
compat->sig[7] = set->sig[3] >> 32;
case 3: compat->sig[4] = set->sig[2] & 0xffffffffull ;
compat->sig[5] = set->sig[2] >> 32;
case 2: compat->sig[2] = set->sig[1] & 0xffffffffull ;
compat->sig[3] = set->sig[1] >> 32;
case 1: compat->sig[0] = set->sig[0] & 0xffffffffull ;
compat->sig[1] = set->sig[0] >> 32;
}
}
static inline void sigset_from_compat(sigset_t *set, compat_sigset_t *compat)
{
switch (_NSIG_WORDS) {
case 4: set->sig[3] = compat->sig[6] | (((long)compat->sig[7]) << 32);
case 3: set->sig[2] = compat->sig[4] | (((long)compat->sig[5]) << 32);
case 2: set->sig[1] = compat->sig[2] | (((long)compat->sig[3]) << 32);
case 1: set->sig[0] = compat->sig[0] | (((long)compat->sig[1]) << 32);
}
}
/*
* Save the current user registers on the user stack.
* We only save the altivec registers if the process has used
* altivec instructions at some point.
*/
static int save_user_regs(struct pt_regs *regs, struct mcontext32 __user *frame, int sigret)
{
elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
int i, err = 0;
/* Make sure floating point registers are stored in regs */
flush_fp_to_thread(current);
/* save general and floating-point registers */
for (i = 0; i <= PT_RESULT; i ++)
err |= __put_user((unsigned int)gregs[i], &frame->mc_gregs[i]);
err |= __copy_to_user(&frame->mc_fregs, current->thread.fpr,
ELF_NFPREG * sizeof(double));
if (err)
return 1;
current->thread.fpscr = 0; /* turn off all fp exceptions */
#ifdef CONFIG_ALTIVEC
/* save altivec registers */
if (current->thread.used_vr) {
flush_altivec_to_thread(current);
if (__copy_to_user(&frame->mc_vregs, current->thread.vr,
ELF_NVRREG32 * sizeof(vector128)))
return 1;
/* set MSR_VEC in the saved MSR value to indicate that
frame->mc_vregs contains valid data */
if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR]))
return 1;
}
/* else assert((regs->msr & MSR_VEC) == 0) */
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec. Since VSCR only contains 32 bits saved in the least
* significant bits of a vector, we "cheat" and stuff VRSAVE in the
* most significant bits of that same vector. --BenH
*/
if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
return 1;
#endif /* CONFIG_ALTIVEC */
if (sigret) {
/* Set up the sigreturn trampoline: li r0,sigret; sc */
if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
|| __put_user(0x44000002UL, &frame->tramp[1]))
return 1;
flush_icache_range((unsigned long) &frame->tramp[0],
(unsigned long) &frame->tramp[2]);
}
return 0;
}
/*
* Restore the current user register values from the user stack,
* (except for MSR).
*/
static long restore_user_regs(struct pt_regs *regs,
struct mcontext32 __user *sr, int sig)
{
elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
int i;
long err = 0;
unsigned int save_r2 = 0;
#ifdef CONFIG_ALTIVEC
unsigned long msr;
#endif
/*
* restore general registers but not including MSR or SOFTE. Also
* take care of keeping r2 (TLS) intact if not a signal
*/
if (!sig)
save_r2 = (unsigned int)regs->gpr[2];
for (i = 0; i <= PT_RESULT; i++) {
if ((i == PT_MSR) || (i == PT_SOFTE))
continue;
err |= __get_user(gregs[i], &sr->mc_gregs[i]);
}
if (!sig)
regs->gpr[2] = (unsigned long) save_r2;
if (err)
return 1;
/* force the process to reload the FP registers from
current->thread when it next does FP instructions */
regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
sizeof(sr->mc_fregs)))
return 1;
#ifdef CONFIG_ALTIVEC
/* force the process to reload the altivec registers from
current->thread when it next does altivec instructions */
regs->msr &= ~MSR_VEC;
if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_VEC) != 0) {
/* restore altivec registers from the stack */
if (__copy_from_user(current->thread.vr, &sr->mc_vregs,
sizeof(sr->mc_vregs)))
return 1;
} else if (current->thread.used_vr)
memset(current->thread.vr, 0, ELF_NVRREG32 * sizeof(vector128));
/* Always get VRSAVE back */
if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
return 1;
#endif /* CONFIG_ALTIVEC */
#ifndef CONFIG_SMP
preempt_disable();
if (last_task_used_math == current)
last_task_used_math = NULL;
if (last_task_used_altivec == current)
last_task_used_altivec = NULL;
preempt_enable();
#endif
return 0;
}
/*
* Start of nonRT signal support
*
* sigset_t is 32 bits for non-rt signals
*
* System Calls
* sigaction sys32_sigaction
* sigreturn sys32_sigreturn
*
* Note sigsuspend has no special 32 bit routine - uses the 64 bit routine
*
* Other routines
* setup_frame32
*/
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
long sys32_sigsuspend(old_sigset_t mask, int p2, int p3, int p4, int p6, int p7,
struct pt_regs *regs)
{
sigset_t saveset;
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
saveset = current->blocked;
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
regs->result = -EINTR;
regs->gpr[3] = EINTR;
regs->ccr |= 0x10000000;
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
if (do_signal32(&saveset, regs))
/*
* Returning 0 means we return to userspace via
* ret_from_except and thus restore all user
* registers from *regs. This is what we need
* to do when a signal has been delivered.
*/
return 0;
}
}
long sys32_sigaction(int sig, struct old_sigaction32 __user *act,
struct old_sigaction32 __user *oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
if (sig < 0)
sig = -sig;
if (act) {
compat_old_sigset_t mask;
compat_uptr_t handler, restorer;
if (get_user(handler, &act->sa_handler) ||
__get_user(restorer, &act->sa_restorer) ||
__get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
__get_user(mask, &act->sa_mask))
return -EFAULT;
new_ka.sa.sa_handler = compat_ptr(handler);
new_ka.sa.sa_restorer = compat_ptr(restorer);
siginitset(&new_ka.sa.sa_mask, mask);
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
if (put_user((long)old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user((long)old_ka.sa.sa_restorer, &oact->sa_restorer) ||
__put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
}
return ret;
}
/*
* Start of RT signal support
*
* sigset_t is 64 bits for rt signals
*
* System Calls
* sigaction sys32_rt_sigaction
* sigpending sys32_rt_sigpending
* sigprocmask sys32_rt_sigprocmask
* sigreturn sys32_rt_sigreturn
* sigqueueinfo sys32_rt_sigqueueinfo
* sigsuspend sys32_rt_sigsuspend
*
* Other routines
* setup_rt_frame32
* copy_siginfo_to_user32
* siginfo32to64
*/
long sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
struct sigaction32 __user *oact, size_t sigsetsize)
{
struct k_sigaction new_ka, old_ka;
int ret;
compat_sigset_t set32;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(compat_sigset_t))
return -EINVAL;
if (act) {
compat_uptr_t handler;
ret = get_user(handler, &act->sa_handler);
new_ka.sa.sa_handler = compat_ptr(handler);
ret |= __copy_from_user(&set32, &act->sa_mask,
sizeof(compat_sigset_t));
sigset_from_compat(&new_ka.sa.sa_mask, &set32);
ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
if (ret)
return -EFAULT;
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
compat_from_sigset(&set32, &old_ka.sa.sa_mask);
ret = put_user((long)old_ka.sa.sa_handler, &oact->sa_handler);
ret |= __copy_to_user(&oact->sa_mask, &set32,
sizeof(compat_sigset_t));
ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
}
return ret;
}
/*
* Note: it is necessary to treat how as an unsigned int, with the
* corresponding cast to a signed int to insure that the proper
* conversion (sign extension) between the register representation
* of a signed int (msr in 32-bit mode) and the register representation
* of a signed int (msr in 64-bit mode) is performed.
*/
long sys32_rt_sigprocmask(u32 how, compat_sigset_t __user *set,
compat_sigset_t __user *oset, size_t sigsetsize)
{
sigset_t s;
sigset_t __user *up;
compat_sigset_t s32;
int ret;
mm_segment_t old_fs = get_fs();
if (set) {
if (copy_from_user (&s32, set, sizeof(compat_sigset_t)))
return -EFAULT;
sigset_from_compat(&s, &s32);
}
set_fs(KERNEL_DS);
/* This is valid because of the set_fs() */
up = (sigset_t __user *) &s;
ret = sys_rt_sigprocmask((int)how, set ? up : NULL, oset ? up : NULL,
sigsetsize);
set_fs(old_fs);
if (ret)
return ret;
if (oset) {
compat_from_sigset(&s32, &s);
if (copy_to_user (oset, &s32, sizeof(compat_sigset_t)))
return -EFAULT;
}
return 0;
}
long sys32_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize)
{
sigset_t s;
compat_sigset_t s32;
int ret;
mm_segment_t old_fs = get_fs();
set_fs(KERNEL_DS);
/* The __user pointer cast is valid because of the set_fs() */
ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize);
set_fs(old_fs);
if (!ret) {
compat_from_sigset(&s32, &s);
if (copy_to_user (set, &s32, sizeof(compat_sigset_t)))
return -EFAULT;
}
return ret;
}
int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s)
{
int err;
if (!access_ok (VERIFY_WRITE, d, sizeof(*d)))
return -EFAULT;
/* If you change siginfo_t structure, please be sure
* this code is fixed accordingly.
* It should never copy any pad contained in the structure
* to avoid security leaks, but must copy the generic
* 3 ints plus the relevant union member.
* This routine must convert siginfo from 64bit to 32bit as well
* at the same time.
*/
err = __put_user(s->si_signo, &d->si_signo);
err |= __put_user(s->si_errno, &d->si_errno);
err |= __put_user((short)s->si_code, &d->si_code);
if (s->si_code < 0)
err |= __copy_to_user(&d->_sifields._pad, &s->_sifields._pad,
SI_PAD_SIZE32);
else switch(s->si_code >> 16) {
case __SI_CHLD >> 16:
err |= __put_user(s->si_pid, &d->si_pid);
err |= __put_user(s->si_uid, &d->si_uid);
err |= __put_user(s->si_utime, &d->si_utime);
err |= __put_user(s->si_stime, &d->si_stime);
err |= __put_user(s->si_status, &d->si_status);
break;
case __SI_FAULT >> 16:
err |= __put_user((unsigned int)(unsigned long)s->si_addr,
&d->si_addr);
break;
case __SI_POLL >> 16:
err |= __put_user(s->si_band, &d->si_band);
err |= __put_user(s->si_fd, &d->si_fd);
break;
case __SI_TIMER >> 16:
err |= __put_user(s->si_tid, &d->si_tid);
err |= __put_user(s->si_overrun, &d->si_overrun);
err |= __put_user(s->si_int, &d->si_int);
break;
case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
case __SI_MESGQ >> 16:
err |= __put_user(s->si_int, &d->si_int);
/* fallthrough */
case __SI_KILL >> 16:
default:
err |= __put_user(s->si_pid, &d->si_pid);
err |= __put_user(s->si_uid, &d->si_uid);
break;
}
return err;
}
/*
* Note: it is necessary to treat pid and sig as unsigned ints, with the
* corresponding cast to a signed int to insure that the proper conversion
* (sign extension) between the register representation of a signed int
* (msr in 32-bit mode) and the register representation of a signed int
* (msr in 64-bit mode) is performed.
*/
long sys32_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo)
{
siginfo_t info;
int ret;
mm_segment_t old_fs = get_fs();
if (copy_from_user (&info, uinfo, 3*sizeof(int)) ||
copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE32))
return -EFAULT;
set_fs (KERNEL_DS);
/* The __user pointer cast is valid becasuse of the set_fs() */
ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info);
set_fs (old_fs);
return ret;
}
int sys32_rt_sigsuspend(compat_sigset_t __user * unewset, size_t sigsetsize, int p3,
int p4, int p6, int p7, struct pt_regs *regs)
{
sigset_t saveset, newset;
compat_sigset_t s32;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&s32, unewset, sizeof(s32)))
return -EFAULT;
/*
* Swap the 2 words of the 64-bit sigset_t (they are stored
* in the "wrong" endian in 32-bit user storage).
*/
sigset_from_compat(&newset, &s32);
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
saveset = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
regs->result = -EINTR;
regs->gpr[3] = EINTR;
regs->ccr |= 0x10000000;
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
if (do_signal32(&saveset, regs))
/*
* Returning 0 means we return to userspace via
* ret_from_except and thus restore all user
* registers from *regs. This is what we need
* to do when a signal has been delivered.
*/
return 0;
}
}
/*
* Start Alternate signal stack support
*
* System Calls
* sigaltatck sys32_sigaltstack
*/
int sys32_sigaltstack(u32 __new, u32 __old, int r5,
int r6, int r7, int r8, struct pt_regs *regs)
{
stack_32_t __user * newstack = (stack_32_t __user *)(long) __new;
stack_32_t __user * oldstack = (stack_32_t __user *)(long) __old;
stack_t uss, uoss;
int ret;
mm_segment_t old_fs;
unsigned long sp;
compat_uptr_t ss_sp;
/*
* set sp to the user stack on entry to the system call
* the system call router sets R9 to the saved registers
*/
sp = regs->gpr[1];
/* Put new stack info in local 64 bit stack struct */
if (newstack) {
if (get_user(ss_sp, &newstack->ss_sp) ||
__get_user(uss.ss_flags, &newstack->ss_flags) ||
__get_user(uss.ss_size, &newstack->ss_size))
return -EFAULT;
uss.ss_sp = compat_ptr(ss_sp);
}
old_fs = get_fs();
set_fs(KERNEL_DS);
/* The __user pointer casts are valid because of the set_fs() */
ret = do_sigaltstack(
newstack ? (stack_t __user *) &uss : NULL,
oldstack ? (stack_t __user *) &uoss : NULL,
sp);
set_fs(old_fs);
/* Copy the stack information to the user output buffer */
if (!ret && oldstack &&
(put_user((long)uoss.ss_sp, &oldstack->ss_sp) ||
__put_user(uoss.ss_flags, &oldstack->ss_flags) ||
__put_user(uoss.ss_size, &oldstack->ss_size)))
return -EFAULT;
return ret;
}
/*
* Set up a signal frame for a "real-time" signal handler
* (one which gets siginfo).
*/
static int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, unsigned long newsp)
{
struct rt_sigframe32 __user *rt_sf;
struct mcontext32 __user *frame;
unsigned long origsp = newsp;
compat_sigset_t c_oldset;
/* Set up Signal Frame */
/* Put a Real Time Context onto stack */
newsp -= sizeof(*rt_sf);
rt_sf = (struct rt_sigframe32 __user *)newsp;
/* create a stack frame for the caller of the handler */
newsp -= __SIGNAL_FRAMESIZE32 + 16;
if (!access_ok(VERIFY_WRITE, (void __user *)newsp, origsp - newsp))
goto badframe;
compat_from_sigset(&c_oldset, oldset);
/* Put the siginfo & fill in most of the ucontext */
if (copy_siginfo_to_user32(&rt_sf->info, info)
|| __put_user(0, &rt_sf->uc.uc_flags)
|| __put_user(0, &rt_sf->uc.uc_link)
|| __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp)
|| __put_user(sas_ss_flags(regs->gpr[1]),
&rt_sf->uc.uc_stack.ss_flags)
|| __put_user(current->sas_ss_size, &rt_sf->uc.uc_stack.ss_size)
|| __put_user((u32)(u64)&rt_sf->uc.uc_mcontext, &rt_sf->uc.uc_regs)
|| __copy_to_user(&rt_sf->uc.uc_sigmask, &c_oldset, sizeof(c_oldset)))
goto badframe;
/* Save user registers on the stack */
frame = &rt_sf->uc.uc_mcontext;
if (put_user(regs->gpr[1], (u32 __user *)newsp))
goto badframe;
if (vdso32_rt_sigtramp && current->thread.vdso_base) {
if (save_user_regs(regs, frame, 0))
goto badframe;
regs->link = current->thread.vdso_base + vdso32_rt_sigtramp;
} else {
if (save_user_regs(regs, frame, __NR_rt_sigreturn))
goto badframe;
regs->link = (unsigned long) frame->tramp;
}
regs->gpr[1] = (unsigned long) newsp;
regs->gpr[3] = sig;
regs->gpr[4] = (unsigned long) &rt_sf->info;
regs->gpr[5] = (unsigned long) &rt_sf->uc;
regs->gpr[6] = (unsigned long) rt_sf;
regs->nip = (unsigned long) ka->sa.sa_handler;
regs->trap = 0;
regs->result = 0;
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
return 1;
badframe:
#if DEBUG_SIG
printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
regs, frame, newsp);
#endif
force_sigsegv(sig, current);
return 0;
}
static long do_setcontext32(struct ucontext32 __user *ucp, struct pt_regs *regs, int sig)
{
compat_sigset_t c_set;
sigset_t set;
u32 mcp;
if (__copy_from_user(&c_set, &ucp->uc_sigmask, sizeof(c_set))
|| __get_user(mcp, &ucp->uc_regs))
return -EFAULT;
sigset_from_compat(&set, &c_set);
restore_sigmask(&set);
if (restore_user_regs(regs, (struct mcontext32 __user *)(u64)mcp, sig))
return -EFAULT;
return 0;
}
/*
* Handle {get,set,swap}_context operations for 32 bits processes
*/
long sys32_swapcontext(struct ucontext32 __user *old_ctx,
struct ucontext32 __user *new_ctx,
int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
{
unsigned char tmp;
compat_sigset_t c_set;
/* Context size is for future use. Right now, we only make sure
* we are passed something we understand
*/
if (ctx_size < sizeof(struct ucontext32))
return -EINVAL;
if (old_ctx != NULL) {
compat_from_sigset(&c_set, &current->blocked);
if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
|| save_user_regs(regs, &old_ctx->uc_mcontext, 0)
|| __copy_to_user(&old_ctx->uc_sigmask, &c_set, sizeof(c_set))
|| __put_user((u32)(u64)&old_ctx->uc_mcontext, &old_ctx->uc_regs))
return -EFAULT;
}
if (new_ctx == NULL)
return 0;
if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx))
|| __get_user(tmp, (u8 __user *) new_ctx)
|| __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1))
return -EFAULT;
/*
* If we get a fault copying the context into the kernel's
* image of the user's registers, we can't just return -EFAULT
* because the user's registers will be corrupted. For instance
* the NIP value may have been updated but not some of the
* other registers. Given that we have done the access_ok
* and successfully read the first and last bytes of the region
* above, this should only happen in an out-of-memory situation
* or if another thread unmaps the region containing the context.
* We kill the task with a SIGSEGV in this situation.
*/
if (do_setcontext32(new_ctx, regs, 0))
do_exit(SIGSEGV);
return 0;
}
long sys32_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
struct pt_regs *regs)
{
struct rt_sigframe32 __user *rt_sf;
int ret;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
rt_sf = (struct rt_sigframe32 __user *)
(regs->gpr[1] + __SIGNAL_FRAMESIZE32 + 16);
if (!access_ok(VERIFY_READ, rt_sf, sizeof(*rt_sf)))
goto bad;
if (do_setcontext32(&rt_sf->uc, regs, 1))
goto bad;
/*
* It's not clear whether or why it is desirable to save the
* sigaltstack setting on signal delivery and restore it on
* signal return. But other architectures do this and we have
* always done it up until now so it is probably better not to
* change it. -- paulus
* We use the sys32_ version that does the 32/64 bits conversion
* and takes userland pointer directly. What about error checking ?
* nobody does any...
*/
sys32_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs);
ret = regs->result;
return ret;
bad:
force_sig(SIGSEGV, current);
return 0;
}
/*
* OK, we're invoking a handler
*/
static int handle_signal32(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, unsigned long newsp)
{
struct sigcontext32 __user *sc;
struct sigregs32 __user *frame;
unsigned long origsp = newsp;
/* Set up Signal Frame */
newsp -= sizeof(struct sigregs32);
frame = (struct sigregs32 __user *) newsp;
/* Put a sigcontext on the stack */
newsp -= sizeof(*sc);
sc = (struct sigcontext32 __user *) newsp;
/* create a stack frame for the caller of the handler */
newsp -= __SIGNAL_FRAMESIZE32;
if (!access_ok(VERIFY_WRITE, (void __user *) newsp, origsp - newsp))
goto badframe;
#if _NSIG != 64
#error "Please adjust handle_signal32()"
#endif
if (__put_user((u32)(u64)ka->sa.sa_handler, &sc->handler)
|| __put_user(oldset->sig[0], &sc->oldmask)
|| __put_user((oldset->sig[0] >> 32), &sc->_unused[3])
|| __put_user((u32)(u64)frame, &sc->regs)
|| __put_user(sig, &sc->signal))
goto badframe;
if (vdso32_sigtramp && current->thread.vdso_base) {
if (save_user_regs(regs, &frame->mctx, 0))
goto badframe;
regs->link = current->thread.vdso_base + vdso32_sigtramp;
} else {
if (save_user_regs(regs, &frame->mctx, __NR_sigreturn))
goto badframe;
regs->link = (unsigned long) frame->mctx.tramp;
}
if (put_user(regs->gpr[1], (u32 __user *)newsp))
goto badframe;
regs->gpr[1] = (unsigned long) newsp;
regs->gpr[3] = sig;
regs->gpr[4] = (unsigned long) sc;
regs->nip = (unsigned long) ka->sa.sa_handler;
regs->trap = 0;
regs->result = 0;
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
return 1;
badframe:
#if DEBUG_SIG
printk("badframe in handle_signal, regs=%p frame=%x newsp=%x\n",
regs, frame, *newspp);
#endif
force_sigsegv(sig, current);
return 0;
}
/*
* Do a signal return; undo the signal stack.
*/
long sys32_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
struct pt_regs *regs)
{
struct sigcontext32 __user *sc;
struct sigcontext32 sigctx;
struct mcontext32 __user *sr;
sigset_t set;
int ret;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
sc = (struct sigcontext32 __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE32);
if (copy_from_user(&sigctx, sc, sizeof(sigctx)))
goto badframe;
/*
* Note that PPC32 puts the upper 32 bits of the sigmask in the
* unused part of the signal stackframe
*/
set.sig[0] = sigctx.oldmask + ((long)(sigctx._unused[3]) << 32);
restore_sigmask(&set);
sr = (struct mcontext32 __user *)(u64)sigctx.regs;
if (!access_ok(VERIFY_READ, sr, sizeof(*sr))
|| restore_user_regs(regs, sr, 1))
goto badframe;
ret = regs->result;
return ret;
badframe:
force_sig(SIGSEGV, current);
return 0;
}
/*
* Start of do_signal32 routine
*
* This routine gets control when a pending signal needs to be processed
* in the 32 bit target thread -
*
* It handles both rt and non-rt signals
*/
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
int do_signal32(sigset_t *oldset, struct pt_regs *regs)
{
siginfo_t info;
unsigned int frame, newsp;
int signr, ret;
struct k_sigaction ka;
if (!oldset)
oldset = &current->blocked;
newsp = frame = 0;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (TRAP(regs) == 0x0C00 /* System Call! */
&& regs->ccr & 0x10000000 /* error signalled */
&& ((ret = regs->gpr[3]) == ERESTARTSYS
|| ret == ERESTARTNOHAND || ret == ERESTARTNOINTR
|| ret == ERESTART_RESTARTBLOCK)) {
if (signr > 0
&& (ret == ERESTARTNOHAND || ret == ERESTART_RESTARTBLOCK
|| (ret == ERESTARTSYS
&& !(ka.sa.sa_flags & SA_RESTART)))) {
/* make the system call return an EINTR error */
regs->result = -EINTR;
regs->gpr[3] = EINTR;
/* note that the cr0.SO bit is already set */
} else {
regs->nip -= 4; /* Back up & retry system call */
regs->result = 0;
regs->trap = 0;
if (ret == ERESTART_RESTARTBLOCK)
regs->gpr[0] = __NR_restart_syscall;
else
regs->gpr[3] = regs->orig_gpr3;
}
}
if (signr == 0)
return 0; /* no signals delivered */
if ((ka.sa.sa_flags & SA_ONSTACK) && current->sas_ss_size
&& (!on_sig_stack(regs->gpr[1])))
newsp = (current->sas_ss_sp + current->sas_ss_size);
else
newsp = regs->gpr[1];
newsp &= ~0xfUL;
/* Whee! Actually deliver the signal. */
if (ka.sa.sa_flags & SA_SIGINFO)
ret = handle_rt_signal32(signr, &ka, &info, oldset, regs, newsp);
else
ret = handle_signal32(signr, &ka, &info, oldset, regs, newsp);
if (ret) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked,
&ka.sa.sa_mask);
if (!(ka.sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, signr);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
return ret;
}