![Luis R. Rodriguez](/assets/img/avatar_default.png)
This fixes a regression introduced by commit 7b463ced6
(prism54: set
carrier flags correctly) which causes the device to come up without
a carrier in AP-mode.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
969 lines
27 KiB
C
969 lines
27 KiB
C
/*
|
|
* Copyright (C) 2002 Intersil Americas Inc.
|
|
* Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
|
|
* Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/if_arp.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include "prismcompat.h"
|
|
#include "isl_38xx.h"
|
|
#include "isl_ioctl.h"
|
|
#include "islpci_dev.h"
|
|
#include "islpci_mgt.h"
|
|
#include "islpci_eth.h"
|
|
#include "oid_mgt.h"
|
|
|
|
#define ISL3877_IMAGE_FILE "isl3877"
|
|
#define ISL3886_IMAGE_FILE "isl3886"
|
|
#define ISL3890_IMAGE_FILE "isl3890"
|
|
|
|
static int prism54_bring_down(islpci_private *);
|
|
static int islpci_alloc_memory(islpci_private *);
|
|
static struct net_device_stats *islpci_statistics(struct net_device *);
|
|
|
|
/* Temporary dummy MAC address to use until firmware is loaded.
|
|
* The idea there is that some tools (such as nameif) may query
|
|
* the MAC address before the netdev is 'open'. By using a valid
|
|
* OUI prefix, they can process the netdev properly.
|
|
* Of course, this is not the final/real MAC address. It doesn't
|
|
* matter, as you are suppose to be able to change it anytime via
|
|
* ndev->set_mac_address. Jean II */
|
|
static const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 };
|
|
|
|
static int
|
|
isl_upload_firmware(islpci_private *priv)
|
|
{
|
|
u32 reg, rc;
|
|
void __iomem *device_base = priv->device_base;
|
|
|
|
/* clear the RAMBoot and the Reset bit */
|
|
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
|
|
reg &= ~ISL38XX_CTRL_STAT_RESET;
|
|
reg &= ~ISL38XX_CTRL_STAT_RAMBOOT;
|
|
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
|
|
wmb();
|
|
udelay(ISL38XX_WRITEIO_DELAY);
|
|
|
|
/* set the Reset bit without reading the register ! */
|
|
reg |= ISL38XX_CTRL_STAT_RESET;
|
|
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
|
|
wmb();
|
|
udelay(ISL38XX_WRITEIO_DELAY);
|
|
|
|
/* clear the Reset bit */
|
|
reg &= ~ISL38XX_CTRL_STAT_RESET;
|
|
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
|
|
wmb();
|
|
|
|
/* wait a while for the device to reboot */
|
|
mdelay(50);
|
|
|
|
{
|
|
const struct firmware *fw_entry = NULL;
|
|
long fw_len;
|
|
const u32 *fw_ptr;
|
|
|
|
rc = request_firmware(&fw_entry, priv->firmware, PRISM_FW_PDEV);
|
|
if (rc) {
|
|
printk(KERN_ERR
|
|
"%s: request_firmware() failed for '%s'\n",
|
|
"prism54", priv->firmware);
|
|
return rc;
|
|
}
|
|
/* prepare the Direct Memory Base register */
|
|
reg = ISL38XX_DEV_FIRMWARE_ADDRES;
|
|
|
|
fw_ptr = (u32 *) fw_entry->data;
|
|
fw_len = fw_entry->size;
|
|
|
|
if (fw_len % 4) {
|
|
printk(KERN_ERR
|
|
"%s: firmware '%s' size is not multiple of 32bit, aborting!\n",
|
|
"prism54", priv->firmware);
|
|
release_firmware(fw_entry);
|
|
return -EILSEQ; /* Illegal byte sequence */;
|
|
}
|
|
|
|
while (fw_len > 0) {
|
|
long _fw_len =
|
|
(fw_len >
|
|
ISL38XX_MEMORY_WINDOW_SIZE) ?
|
|
ISL38XX_MEMORY_WINDOW_SIZE : fw_len;
|
|
u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN;
|
|
|
|
/* set the card's base address for writing the data */
|
|
isl38xx_w32_flush(device_base, reg,
|
|
ISL38XX_DIR_MEM_BASE_REG);
|
|
wmb(); /* be paranoid */
|
|
|
|
/* increment the write address for next iteration */
|
|
reg += _fw_len;
|
|
fw_len -= _fw_len;
|
|
|
|
/* write the data to the Direct Memory Window 32bit-wise */
|
|
/* memcpy_toio() doesn't guarantee 32bit writes :-| */
|
|
while (_fw_len > 0) {
|
|
/* use non-swapping writel() */
|
|
__raw_writel(*fw_ptr, dev_fw_ptr);
|
|
fw_ptr++, dev_fw_ptr++;
|
|
_fw_len -= 4;
|
|
}
|
|
|
|
/* flush PCI posting */
|
|
(void) readl(device_base + ISL38XX_PCI_POSTING_FLUSH);
|
|
wmb(); /* be paranoid again */
|
|
|
|
BUG_ON(_fw_len != 0);
|
|
}
|
|
|
|
BUG_ON(fw_len != 0);
|
|
|
|
/* Firmware version is at offset 40 (also for "newmac") */
|
|
printk(KERN_DEBUG "%s: firmware version: %.8s\n",
|
|
priv->ndev->name, fw_entry->data + 40);
|
|
|
|
release_firmware(fw_entry);
|
|
}
|
|
|
|
/* now reset the device
|
|
* clear the Reset & ClkRun bit, set the RAMBoot bit */
|
|
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
|
|
reg &= ~ISL38XX_CTRL_STAT_CLKRUN;
|
|
reg &= ~ISL38XX_CTRL_STAT_RESET;
|
|
reg |= ISL38XX_CTRL_STAT_RAMBOOT;
|
|
isl38xx_w32_flush(device_base, reg, ISL38XX_CTRL_STAT_REG);
|
|
wmb();
|
|
udelay(ISL38XX_WRITEIO_DELAY);
|
|
|
|
/* set the reset bit latches the host override and RAMBoot bits
|
|
* into the device for operation when the reset bit is reset */
|
|
reg |= ISL38XX_CTRL_STAT_RESET;
|
|
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
|
|
/* don't do flush PCI posting here! */
|
|
wmb();
|
|
udelay(ISL38XX_WRITEIO_DELAY);
|
|
|
|
/* clear the reset bit should start the whole circus */
|
|
reg &= ~ISL38XX_CTRL_STAT_RESET;
|
|
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
|
|
/* don't do flush PCI posting here! */
|
|
wmb();
|
|
udelay(ISL38XX_WRITEIO_DELAY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************
|
|
Device Interrupt Handler
|
|
******************************************************************************/
|
|
|
|
irqreturn_t
|
|
islpci_interrupt(int irq, void *config)
|
|
{
|
|
u32 reg;
|
|
islpci_private *priv = config;
|
|
struct net_device *ndev = priv->ndev;
|
|
void __iomem *device = priv->device_base;
|
|
int powerstate = ISL38XX_PSM_POWERSAVE_STATE;
|
|
|
|
/* lock the interrupt handler */
|
|
spin_lock(&priv->slock);
|
|
|
|
/* received an interrupt request on a shared IRQ line
|
|
* first check whether the device is in sleep mode */
|
|
reg = readl(device + ISL38XX_CTRL_STAT_REG);
|
|
if (reg & ISL38XX_CTRL_STAT_SLEEPMODE)
|
|
/* device is in sleep mode, IRQ was generated by someone else */
|
|
{
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n");
|
|
#endif
|
|
spin_unlock(&priv->slock);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
|
|
/* check whether there is any source of interrupt on the device */
|
|
reg = readl(device + ISL38XX_INT_IDENT_REG);
|
|
|
|
/* also check the contents of the Interrupt Enable Register, because this
|
|
* will filter out interrupt sources from other devices on the same irq ! */
|
|
reg &= readl(device + ISL38XX_INT_EN_REG);
|
|
reg &= ISL38XX_INT_SOURCES;
|
|
|
|
if (reg != 0) {
|
|
if (islpci_get_state(priv) != PRV_STATE_SLEEP)
|
|
powerstate = ISL38XX_PSM_ACTIVE_STATE;
|
|
|
|
/* reset the request bits in the Identification register */
|
|
isl38xx_w32_flush(device, reg, ISL38XX_INT_ACK_REG);
|
|
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_FUNCTION_CALLS,
|
|
"IRQ: Identification register 0x%p 0x%x \n", device, reg);
|
|
#endif
|
|
|
|
/* check for each bit in the register separately */
|
|
if (reg & ISL38XX_INT_IDENT_UPDATE) {
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
/* Queue has been updated */
|
|
DEBUG(SHOW_TRACING, "IRQ: Update flag \n");
|
|
|
|
DEBUG(SHOW_QUEUE_INDEXES,
|
|
"CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
|
|
le32_to_cpu(priv->control_block->
|
|
driver_curr_frag[0]),
|
|
le32_to_cpu(priv->control_block->
|
|
driver_curr_frag[1]),
|
|
le32_to_cpu(priv->control_block->
|
|
driver_curr_frag[2]),
|
|
le32_to_cpu(priv->control_block->
|
|
driver_curr_frag[3]),
|
|
le32_to_cpu(priv->control_block->
|
|
driver_curr_frag[4]),
|
|
le32_to_cpu(priv->control_block->
|
|
driver_curr_frag[5])
|
|
);
|
|
|
|
DEBUG(SHOW_QUEUE_INDEXES,
|
|
"CB dev Qs: [%i][%i][%i][%i][%i][%i]\n",
|
|
le32_to_cpu(priv->control_block->
|
|
device_curr_frag[0]),
|
|
le32_to_cpu(priv->control_block->
|
|
device_curr_frag[1]),
|
|
le32_to_cpu(priv->control_block->
|
|
device_curr_frag[2]),
|
|
le32_to_cpu(priv->control_block->
|
|
device_curr_frag[3]),
|
|
le32_to_cpu(priv->control_block->
|
|
device_curr_frag[4]),
|
|
le32_to_cpu(priv->control_block->
|
|
device_curr_frag[5])
|
|
);
|
|
#endif
|
|
|
|
/* cleanup the data low transmit queue */
|
|
islpci_eth_cleanup_transmit(priv, priv->control_block);
|
|
|
|
/* device is in active state, update the
|
|
* powerstate flag if necessary */
|
|
powerstate = ISL38XX_PSM_ACTIVE_STATE;
|
|
|
|
/* check all three queues in priority order
|
|
* call the PIMFOR receive function until the
|
|
* queue is empty */
|
|
if (isl38xx_in_queue(priv->control_block,
|
|
ISL38XX_CB_RX_MGMTQ) != 0) {
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_TRACING,
|
|
"Received frame in Management Queue\n");
|
|
#endif
|
|
islpci_mgt_receive(ndev);
|
|
|
|
islpci_mgt_cleanup_transmit(ndev);
|
|
|
|
/* Refill slots in receive queue */
|
|
islpci_mgmt_rx_fill(ndev);
|
|
|
|
/* no need to trigger the device, next
|
|
islpci_mgt_transaction does it */
|
|
}
|
|
|
|
while (isl38xx_in_queue(priv->control_block,
|
|
ISL38XX_CB_RX_DATA_LQ) != 0) {
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_TRACING,
|
|
"Received frame in Data Low Queue \n");
|
|
#endif
|
|
islpci_eth_receive(priv);
|
|
}
|
|
|
|
/* check whether the data transmit queues were full */
|
|
if (priv->data_low_tx_full) {
|
|
/* check whether the transmit is not full anymore */
|
|
if (ISL38XX_CB_TX_QSIZE -
|
|
isl38xx_in_queue(priv->control_block,
|
|
ISL38XX_CB_TX_DATA_LQ) >=
|
|
ISL38XX_MIN_QTHRESHOLD) {
|
|
/* nope, the driver is ready for more network frames */
|
|
netif_wake_queue(priv->ndev);
|
|
|
|
/* reset the full flag */
|
|
priv->data_low_tx_full = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (reg & ISL38XX_INT_IDENT_INIT) {
|
|
/* Device has been initialized */
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_TRACING,
|
|
"IRQ: Init flag, device initialized \n");
|
|
#endif
|
|
wake_up(&priv->reset_done);
|
|
}
|
|
|
|
if (reg & ISL38XX_INT_IDENT_SLEEP) {
|
|
/* Device intends to move to powersave state */
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n");
|
|
#endif
|
|
isl38xx_handle_sleep_request(priv->control_block,
|
|
&powerstate,
|
|
priv->device_base);
|
|
}
|
|
|
|
if (reg & ISL38XX_INT_IDENT_WAKEUP) {
|
|
/* Device has been woken up to active state */
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n");
|
|
#endif
|
|
|
|
isl38xx_handle_wakeup(priv->control_block,
|
|
&powerstate, priv->device_base);
|
|
}
|
|
} else {
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n");
|
|
#endif
|
|
spin_unlock(&priv->slock);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* sleep -> ready */
|
|
if (islpci_get_state(priv) == PRV_STATE_SLEEP
|
|
&& powerstate == ISL38XX_PSM_ACTIVE_STATE)
|
|
islpci_set_state(priv, PRV_STATE_READY);
|
|
|
|
/* !sleep -> sleep */
|
|
if (islpci_get_state(priv) != PRV_STATE_SLEEP
|
|
&& powerstate == ISL38XX_PSM_POWERSAVE_STATE)
|
|
islpci_set_state(priv, PRV_STATE_SLEEP);
|
|
|
|
/* unlock the interrupt handler */
|
|
spin_unlock(&priv->slock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/******************************************************************************
|
|
Network Interface Control & Statistical functions
|
|
******************************************************************************/
|
|
static int
|
|
islpci_open(struct net_device *ndev)
|
|
{
|
|
u32 rc;
|
|
islpci_private *priv = netdev_priv(ndev);
|
|
|
|
/* reset data structures, upload firmware and reset device */
|
|
rc = islpci_reset(priv,1);
|
|
if (rc) {
|
|
prism54_bring_down(priv);
|
|
return rc; /* Returns informative message */
|
|
}
|
|
|
|
netif_start_queue(ndev);
|
|
|
|
/* Turn off carrier if in STA or Ad-hoc mode. It will be turned on
|
|
* once the firmware receives a trap of being associated
|
|
* (GEN_OID_LINKSTATE). In other modes (AP or WDS or monitor) we
|
|
* should just leave the carrier on as its expected the firmware
|
|
* won't send us a trigger. */
|
|
if (priv->iw_mode == IW_MODE_INFRA || priv->iw_mode == IW_MODE_ADHOC)
|
|
netif_carrier_off(ndev);
|
|
else
|
|
netif_carrier_on(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
islpci_close(struct net_device *ndev)
|
|
{
|
|
islpci_private *priv = netdev_priv(ndev);
|
|
|
|
printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name);
|
|
|
|
netif_stop_queue(ndev);
|
|
|
|
return prism54_bring_down(priv);
|
|
}
|
|
|
|
static int
|
|
prism54_bring_down(islpci_private *priv)
|
|
{
|
|
void __iomem *device_base = priv->device_base;
|
|
u32 reg;
|
|
/* we are going to shutdown the device */
|
|
islpci_set_state(priv, PRV_STATE_PREBOOT);
|
|
|
|
/* disable all device interrupts in case they weren't */
|
|
isl38xx_disable_interrupts(priv->device_base);
|
|
|
|
/* For safety reasons, we may want to ensure that no DMA transfer is
|
|
* currently in progress by emptying the TX and RX queues. */
|
|
|
|
/* wait until interrupts have finished executing on other CPUs */
|
|
synchronize_irq(priv->pdev->irq);
|
|
|
|
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
|
|
reg &= ~(ISL38XX_CTRL_STAT_RESET | ISL38XX_CTRL_STAT_RAMBOOT);
|
|
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
|
|
wmb();
|
|
udelay(ISL38XX_WRITEIO_DELAY);
|
|
|
|
reg |= ISL38XX_CTRL_STAT_RESET;
|
|
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
|
|
wmb();
|
|
udelay(ISL38XX_WRITEIO_DELAY);
|
|
|
|
/* clear the Reset bit */
|
|
reg &= ~ISL38XX_CTRL_STAT_RESET;
|
|
writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
|
|
wmb();
|
|
|
|
/* wait a while for the device to reset */
|
|
schedule_timeout_uninterruptible(msecs_to_jiffies(50));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
islpci_upload_fw(islpci_private *priv)
|
|
{
|
|
islpci_state_t old_state;
|
|
u32 rc;
|
|
|
|
old_state = islpci_set_state(priv, PRV_STATE_BOOT);
|
|
|
|
printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name);
|
|
|
|
rc = isl_upload_firmware(priv);
|
|
if (rc) {
|
|
/* error uploading the firmware */
|
|
printk(KERN_ERR "%s: could not upload firmware ('%s')\n",
|
|
priv->ndev->name, priv->firmware);
|
|
|
|
islpci_set_state(priv, old_state);
|
|
return rc;
|
|
}
|
|
|
|
printk(KERN_DEBUG "%s: firmware upload complete\n",
|
|
priv->ndev->name);
|
|
|
|
islpci_set_state(priv, PRV_STATE_POSTBOOT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
islpci_reset_if(islpci_private *priv)
|
|
{
|
|
long remaining;
|
|
int result = -ETIME;
|
|
int count;
|
|
|
|
DEFINE_WAIT(wait);
|
|
prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE);
|
|
|
|
/* now the last step is to reset the interface */
|
|
isl38xx_interface_reset(priv->device_base, priv->device_host_address);
|
|
islpci_set_state(priv, PRV_STATE_PREINIT);
|
|
|
|
for(count = 0; count < 2 && result; count++) {
|
|
/* The software reset acknowledge needs about 220 msec here.
|
|
* Be conservative and wait for up to one second. */
|
|
|
|
remaining = schedule_timeout_uninterruptible(HZ);
|
|
|
|
if(remaining > 0) {
|
|
result = 0;
|
|
break;
|
|
}
|
|
|
|
/* If we're here it's because our IRQ hasn't yet gone through.
|
|
* Retry a bit more...
|
|
*/
|
|
printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n",
|
|
priv->ndev->name);
|
|
}
|
|
|
|
finish_wait(&priv->reset_done, &wait);
|
|
|
|
if (result) {
|
|
printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name);
|
|
return result;
|
|
}
|
|
|
|
islpci_set_state(priv, PRV_STATE_INIT);
|
|
|
|
/* Now that the device is 100% up, let's allow
|
|
* for the other interrupts --
|
|
* NOTE: this is not *yet* true since we've only allowed the
|
|
* INIT interrupt on the IRQ line. We can perhaps poll
|
|
* the IRQ line until we know for sure the reset went through */
|
|
isl38xx_enable_common_interrupts(priv->device_base);
|
|
|
|
down_write(&priv->mib_sem);
|
|
result = mgt_commit(priv);
|
|
if (result) {
|
|
printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name);
|
|
up_write(&priv->mib_sem);
|
|
return result;
|
|
}
|
|
up_write(&priv->mib_sem);
|
|
|
|
islpci_set_state(priv, PRV_STATE_READY);
|
|
|
|
printk(KERN_DEBUG "%s: interface reset complete\n", priv->ndev->name);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
islpci_reset(islpci_private *priv, int reload_firmware)
|
|
{
|
|
isl38xx_control_block *cb = /* volatile not needed */
|
|
(isl38xx_control_block *) priv->control_block;
|
|
unsigned counter;
|
|
int rc;
|
|
|
|
if (reload_firmware)
|
|
islpci_set_state(priv, PRV_STATE_PREBOOT);
|
|
else
|
|
islpci_set_state(priv, PRV_STATE_POSTBOOT);
|
|
|
|
printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name);
|
|
|
|
/* disable all device interrupts in case they weren't */
|
|
isl38xx_disable_interrupts(priv->device_base);
|
|
|
|
/* flush all management queues */
|
|
priv->index_mgmt_tx = 0;
|
|
priv->index_mgmt_rx = 0;
|
|
|
|
/* clear the indexes in the frame pointer */
|
|
for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
|
|
cb->driver_curr_frag[counter] = cpu_to_le32(0);
|
|
cb->device_curr_frag[counter] = cpu_to_le32(0);
|
|
}
|
|
|
|
/* reset the mgmt receive queue */
|
|
for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
|
|
isl38xx_fragment *frag = &cb->rx_data_mgmt[counter];
|
|
frag->size = cpu_to_le16(MGMT_FRAME_SIZE);
|
|
frag->flags = 0;
|
|
frag->address = cpu_to_le32(priv->mgmt_rx[counter].pci_addr);
|
|
}
|
|
|
|
for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
|
|
cb->rx_data_low[counter].address =
|
|
cpu_to_le32((u32) priv->pci_map_rx_address[counter]);
|
|
}
|
|
|
|
/* since the receive queues are filled with empty fragments, now we can
|
|
* set the corresponding indexes in the Control Block */
|
|
priv->control_block->driver_curr_frag[ISL38XX_CB_RX_DATA_LQ] =
|
|
cpu_to_le32(ISL38XX_CB_RX_QSIZE);
|
|
priv->control_block->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] =
|
|
cpu_to_le32(ISL38XX_CB_MGMT_QSIZE);
|
|
|
|
/* reset the remaining real index registers and full flags */
|
|
priv->free_data_rx = 0;
|
|
priv->free_data_tx = 0;
|
|
priv->data_low_tx_full = 0;
|
|
|
|
if (reload_firmware) { /* Should we load the firmware ? */
|
|
/* now that the data structures are cleaned up, upload
|
|
* firmware and reset interface */
|
|
rc = islpci_upload_fw(priv);
|
|
if (rc) {
|
|
printk(KERN_ERR "%s: islpci_reset: failure\n",
|
|
priv->ndev->name);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
/* finally reset interface */
|
|
rc = islpci_reset_if(priv);
|
|
if (rc)
|
|
printk(KERN_ERR "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n");
|
|
return rc;
|
|
}
|
|
|
|
static struct net_device_stats *
|
|
islpci_statistics(struct net_device *ndev)
|
|
{
|
|
islpci_private *priv = netdev_priv(ndev);
|
|
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_FUNCTION_CALLS, "islpci_statistics\n");
|
|
#endif
|
|
|
|
return &priv->statistics;
|
|
}
|
|
|
|
/******************************************************************************
|
|
Network device configuration functions
|
|
******************************************************************************/
|
|
static int
|
|
islpci_alloc_memory(islpci_private *priv)
|
|
{
|
|
int counter;
|
|
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
printk(KERN_DEBUG "islpci_alloc_memory\n");
|
|
#endif
|
|
|
|
/* remap the PCI device base address to accessable */
|
|
if (!(priv->device_base =
|
|
ioremap(pci_resource_start(priv->pdev, 0),
|
|
ISL38XX_PCI_MEM_SIZE))) {
|
|
/* error in remapping the PCI device memory address range */
|
|
printk(KERN_ERR "PCI memory remapping failed \n");
|
|
return -1;
|
|
}
|
|
|
|
/* memory layout for consistent DMA region:
|
|
*
|
|
* Area 1: Control Block for the device interface
|
|
* Area 2: Power Save Mode Buffer for temporary frame storage. Be aware that
|
|
* the number of supported stations in the AP determines the minimal
|
|
* size of the buffer !
|
|
*/
|
|
|
|
/* perform the allocation */
|
|
priv->driver_mem_address = pci_alloc_consistent(priv->pdev,
|
|
HOST_MEM_BLOCK,
|
|
&priv->
|
|
device_host_address);
|
|
|
|
if (!priv->driver_mem_address) {
|
|
/* error allocating the block of PCI memory */
|
|
printk(KERN_ERR "%s: could not allocate DMA memory, aborting!",
|
|
"prism54");
|
|
return -1;
|
|
}
|
|
|
|
/* assign the Control Block to the first address of the allocated area */
|
|
priv->control_block =
|
|
(isl38xx_control_block *) priv->driver_mem_address;
|
|
|
|
/* set the Power Save Buffer pointer directly behind the CB */
|
|
priv->device_psm_buffer =
|
|
priv->device_host_address + CONTROL_BLOCK_SIZE;
|
|
|
|
/* make sure all buffer pointers are initialized */
|
|
for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
|
|
priv->control_block->driver_curr_frag[counter] = cpu_to_le32(0);
|
|
priv->control_block->device_curr_frag[counter] = cpu_to_le32(0);
|
|
}
|
|
|
|
priv->index_mgmt_rx = 0;
|
|
memset(priv->mgmt_rx, 0, sizeof(priv->mgmt_rx));
|
|
memset(priv->mgmt_tx, 0, sizeof(priv->mgmt_tx));
|
|
|
|
/* allocate rx queue for management frames */
|
|
if (islpci_mgmt_rx_fill(priv->ndev) < 0)
|
|
goto out_free;
|
|
|
|
/* now get the data rx skb's */
|
|
memset(priv->data_low_rx, 0, sizeof (priv->data_low_rx));
|
|
memset(priv->pci_map_rx_address, 0, sizeof (priv->pci_map_rx_address));
|
|
|
|
for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
|
|
struct sk_buff *skb;
|
|
|
|
/* allocate an sk_buff for received data frames storage
|
|
* each frame on receive size consists of 1 fragment
|
|
* include any required allignment operations */
|
|
if (!(skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2))) {
|
|
/* error allocating an sk_buff structure elements */
|
|
printk(KERN_ERR "Error allocating skb.\n");
|
|
skb = NULL;
|
|
goto out_free;
|
|
}
|
|
skb_reserve(skb, (4 - (long) skb->data) & 0x03);
|
|
/* add the new allocated sk_buff to the buffer array */
|
|
priv->data_low_rx[counter] = skb;
|
|
|
|
/* map the allocated skb data area to pci */
|
|
priv->pci_map_rx_address[counter] =
|
|
pci_map_single(priv->pdev, (void *) skb->data,
|
|
MAX_FRAGMENT_SIZE_RX + 2,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (!priv->pci_map_rx_address[counter]) {
|
|
/* error mapping the buffer to device
|
|
accessable memory address */
|
|
printk(KERN_ERR "failed to map skb DMA'able\n");
|
|
goto out_free;
|
|
}
|
|
}
|
|
|
|
prism54_acl_init(&priv->acl);
|
|
prism54_wpa_bss_ie_init(priv);
|
|
if (mgt_init(priv))
|
|
goto out_free;
|
|
|
|
return 0;
|
|
out_free:
|
|
islpci_free_memory(priv);
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
islpci_free_memory(islpci_private *priv)
|
|
{
|
|
int counter;
|
|
|
|
if (priv->device_base)
|
|
iounmap(priv->device_base);
|
|
priv->device_base = NULL;
|
|
|
|
/* free consistent DMA area... */
|
|
if (priv->driver_mem_address)
|
|
pci_free_consistent(priv->pdev, HOST_MEM_BLOCK,
|
|
priv->driver_mem_address,
|
|
priv->device_host_address);
|
|
|
|
/* clear some dangling pointers */
|
|
priv->driver_mem_address = NULL;
|
|
priv->device_host_address = 0;
|
|
priv->device_psm_buffer = 0;
|
|
priv->control_block = NULL;
|
|
|
|
/* clean up mgmt rx buffers */
|
|
for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
|
|
struct islpci_membuf *buf = &priv->mgmt_rx[counter];
|
|
if (buf->pci_addr)
|
|
pci_unmap_single(priv->pdev, buf->pci_addr,
|
|
buf->size, PCI_DMA_FROMDEVICE);
|
|
buf->pci_addr = 0;
|
|
kfree(buf->mem);
|
|
buf->size = 0;
|
|
buf->mem = NULL;
|
|
}
|
|
|
|
/* clean up data rx buffers */
|
|
for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
|
|
if (priv->pci_map_rx_address[counter])
|
|
pci_unmap_single(priv->pdev,
|
|
priv->pci_map_rx_address[counter],
|
|
MAX_FRAGMENT_SIZE_RX + 2,
|
|
PCI_DMA_FROMDEVICE);
|
|
priv->pci_map_rx_address[counter] = 0;
|
|
|
|
if (priv->data_low_rx[counter])
|
|
dev_kfree_skb(priv->data_low_rx[counter]);
|
|
priv->data_low_rx[counter] = NULL;
|
|
}
|
|
|
|
/* Free the acces control list and the WPA list */
|
|
prism54_acl_clean(&priv->acl);
|
|
prism54_wpa_bss_ie_clean(priv);
|
|
mgt_clean(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
static void
|
|
islpci_set_multicast_list(struct net_device *dev)
|
|
{
|
|
/* put device into promisc mode and let network layer handle it */
|
|
}
|
|
#endif
|
|
|
|
static void islpci_ethtool_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
strcpy(info->driver, DRV_NAME);
|
|
strcpy(info->version, DRV_VERSION);
|
|
}
|
|
|
|
static struct ethtool_ops islpci_ethtool_ops = {
|
|
.get_drvinfo = islpci_ethtool_get_drvinfo,
|
|
};
|
|
|
|
struct net_device *
|
|
islpci_setup(struct pci_dev *pdev)
|
|
{
|
|
islpci_private *priv;
|
|
struct net_device *ndev = alloc_etherdev(sizeof (islpci_private));
|
|
|
|
if (!ndev)
|
|
return ndev;
|
|
|
|
pci_set_drvdata(pdev, ndev);
|
|
#if defined(SET_NETDEV_DEV)
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
#endif
|
|
|
|
/* setup the structure members */
|
|
ndev->base_addr = pci_resource_start(pdev, 0);
|
|
ndev->irq = pdev->irq;
|
|
|
|
/* initialize the function pointers */
|
|
ndev->open = &islpci_open;
|
|
ndev->stop = &islpci_close;
|
|
ndev->get_stats = &islpci_statistics;
|
|
ndev->do_ioctl = &prism54_ioctl;
|
|
ndev->wireless_handlers =
|
|
(struct iw_handler_def *) &prism54_handler_def;
|
|
ndev->ethtool_ops = &islpci_ethtool_ops;
|
|
|
|
ndev->hard_start_xmit = &islpci_eth_transmit;
|
|
/* ndev->set_multicast_list = &islpci_set_multicast_list; */
|
|
ndev->addr_len = ETH_ALEN;
|
|
ndev->set_mac_address = &prism54_set_mac_address;
|
|
/* Get a non-zero dummy MAC address for nameif. Jean II */
|
|
memcpy(ndev->dev_addr, dummy_mac, 6);
|
|
|
|
#ifdef HAVE_TX_TIMEOUT
|
|
ndev->watchdog_timeo = ISLPCI_TX_TIMEOUT;
|
|
ndev->tx_timeout = &islpci_eth_tx_timeout;
|
|
#endif
|
|
|
|
/* allocate a private device structure to the network device */
|
|
priv = netdev_priv(ndev);
|
|
priv->ndev = ndev;
|
|
priv->pdev = pdev;
|
|
priv->monitor_type = ARPHRD_IEEE80211;
|
|
priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ?
|
|
priv->monitor_type : ARPHRD_ETHER;
|
|
|
|
/* Add pointers to enable iwspy support. */
|
|
priv->wireless_data.spy_data = &priv->spy_data;
|
|
ndev->wireless_data = &priv->wireless_data;
|
|
|
|
/* save the start and end address of the PCI memory area */
|
|
ndev->mem_start = (unsigned long) priv->device_base;
|
|
ndev->mem_end = ndev->mem_start + ISL38XX_PCI_MEM_SIZE;
|
|
|
|
#if VERBOSE > SHOW_ERROR_MESSAGES
|
|
DEBUG(SHOW_TRACING, "PCI Memory remapped to 0x%p\n", priv->device_base);
|
|
#endif
|
|
|
|
init_waitqueue_head(&priv->reset_done);
|
|
|
|
/* init the queue read locks, process wait counter */
|
|
mutex_init(&priv->mgmt_lock);
|
|
priv->mgmt_received = NULL;
|
|
init_waitqueue_head(&priv->mgmt_wqueue);
|
|
mutex_init(&priv->stats_lock);
|
|
spin_lock_init(&priv->slock);
|
|
|
|
/* init state machine with off#1 state */
|
|
priv->state = PRV_STATE_OFF;
|
|
priv->state_off = 1;
|
|
|
|
/* initialize workqueue's */
|
|
INIT_WORK(&priv->stats_work, prism54_update_stats);
|
|
priv->stats_timestamp = 0;
|
|
|
|
INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake);
|
|
priv->reset_task_pending = 0;
|
|
|
|
/* allocate various memory areas */
|
|
if (islpci_alloc_memory(priv))
|
|
goto do_free_netdev;
|
|
|
|
/* select the firmware file depending on the device id */
|
|
switch (pdev->device) {
|
|
case 0x3877:
|
|
strcpy(priv->firmware, ISL3877_IMAGE_FILE);
|
|
break;
|
|
|
|
case 0x3886:
|
|
strcpy(priv->firmware, ISL3886_IMAGE_FILE);
|
|
break;
|
|
|
|
default:
|
|
strcpy(priv->firmware, ISL3890_IMAGE_FILE);
|
|
break;
|
|
}
|
|
|
|
if (register_netdev(ndev)) {
|
|
DEBUG(SHOW_ERROR_MESSAGES,
|
|
"ERROR: register_netdev() failed \n");
|
|
goto do_islpci_free_memory;
|
|
}
|
|
|
|
return ndev;
|
|
|
|
do_islpci_free_memory:
|
|
islpci_free_memory(priv);
|
|
do_free_netdev:
|
|
pci_set_drvdata(pdev, NULL);
|
|
free_netdev(ndev);
|
|
priv = NULL;
|
|
return NULL;
|
|
}
|
|
|
|
islpci_state_t
|
|
islpci_set_state(islpci_private *priv, islpci_state_t new_state)
|
|
{
|
|
islpci_state_t old_state;
|
|
|
|
/* lock */
|
|
old_state = priv->state;
|
|
|
|
/* this means either a race condition or some serious error in
|
|
* the driver code */
|
|
switch (new_state) {
|
|
case PRV_STATE_OFF:
|
|
priv->state_off++;
|
|
default:
|
|
priv->state = new_state;
|
|
break;
|
|
|
|
case PRV_STATE_PREBOOT:
|
|
/* there are actually many off-states, enumerated by
|
|
* state_off */
|
|
if (old_state == PRV_STATE_OFF)
|
|
priv->state_off--;
|
|
|
|
/* only if hw_unavailable is zero now it means we either
|
|
* were in off#1 state, or came here from
|
|
* somewhere else */
|
|
if (!priv->state_off)
|
|
priv->state = new_state;
|
|
break;
|
|
};
|
|
#if 0
|
|
printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n",
|
|
priv->ndev->name, old_state, new_state, priv->state_off);
|
|
#endif
|
|
|
|
/* invariants */
|
|
BUG_ON(priv->state_off < 0);
|
|
BUG_ON(priv->state_off && (priv->state != PRV_STATE_OFF));
|
|
BUG_ON(!priv->state_off && (priv->state == PRV_STATE_OFF));
|
|
|
|
/* unlock */
|
|
return old_state;
|
|
}
|