![Jeff Garzik](/assets/img/avatar_default.png)
Some hardware does not support the PACKET command at all. Other hardware supports ATAPI, but the driver does something nasty such as calling BUG() when an ATAPI command is issued. For these such cases, we mark them with a new flag, ATA_FLAG_NO_ATAPI. Initial version contributed by Ben Collins.
2249 lines
59 KiB
C
2249 lines
59 KiB
C
/*
|
|
* sata_mv.c - Marvell SATA support
|
|
*
|
|
* Copyright 2005: EMC Corporation, all rights reserved.
|
|
* Copyright 2005 Red Hat, Inc. All rights reserved.
|
|
*
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org on emails.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
#include <asm/io.h>
|
|
|
|
#define DRV_NAME "sata_mv"
|
|
#define DRV_VERSION "0.5"
|
|
|
|
enum {
|
|
/* BAR's are enumerated in terms of pci_resource_start() terms */
|
|
MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */
|
|
MV_IO_BAR = 2, /* offset 0x18: IO space */
|
|
MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */
|
|
|
|
MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */
|
|
MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */
|
|
|
|
MV_PCI_REG_BASE = 0,
|
|
MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */
|
|
MV_SATAHC0_REG_BASE = 0x20000,
|
|
MV_FLASH_CTL = 0x1046c,
|
|
MV_GPIO_PORT_CTL = 0x104f0,
|
|
MV_RESET_CFG = 0x180d8,
|
|
|
|
MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
|
|
MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
|
|
MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
|
|
MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
|
|
|
|
MV_USE_Q_DEPTH = ATA_DEF_QUEUE,
|
|
|
|
MV_MAX_Q_DEPTH = 32,
|
|
MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
|
|
|
|
/* CRQB needs alignment on a 1KB boundary. Size == 1KB
|
|
* CRPB needs alignment on a 256B boundary. Size == 256B
|
|
* SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB
|
|
* ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
|
|
*/
|
|
MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
|
|
MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
|
|
MV_MAX_SG_CT = 176,
|
|
MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
|
|
MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
|
|
|
|
MV_PORTS_PER_HC = 4,
|
|
/* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
|
|
MV_PORT_HC_SHIFT = 2,
|
|
/* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */
|
|
MV_PORT_MASK = 3,
|
|
|
|
/* Host Flags */
|
|
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
|
|
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
|
|
MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
|
|
ATA_FLAG_NO_ATAPI),
|
|
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
|
|
|
|
CRQB_FLAG_READ = (1 << 0),
|
|
CRQB_TAG_SHIFT = 1,
|
|
CRQB_CMD_ADDR_SHIFT = 8,
|
|
CRQB_CMD_CS = (0x2 << 11),
|
|
CRQB_CMD_LAST = (1 << 15),
|
|
|
|
CRPB_FLAG_STATUS_SHIFT = 8,
|
|
|
|
EPRD_FLAG_END_OF_TBL = (1 << 31),
|
|
|
|
/* PCI interface registers */
|
|
|
|
PCI_COMMAND_OFS = 0xc00,
|
|
|
|
PCI_MAIN_CMD_STS_OFS = 0xd30,
|
|
STOP_PCI_MASTER = (1 << 2),
|
|
PCI_MASTER_EMPTY = (1 << 3),
|
|
GLOB_SFT_RST = (1 << 4),
|
|
|
|
MV_PCI_MODE = 0xd00,
|
|
MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
|
|
MV_PCI_DISC_TIMER = 0xd04,
|
|
MV_PCI_MSI_TRIGGER = 0xc38,
|
|
MV_PCI_SERR_MASK = 0xc28,
|
|
MV_PCI_XBAR_TMOUT = 0x1d04,
|
|
MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
|
|
MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
|
|
MV_PCI_ERR_ATTRIBUTE = 0x1d48,
|
|
MV_PCI_ERR_COMMAND = 0x1d50,
|
|
|
|
PCI_IRQ_CAUSE_OFS = 0x1d58,
|
|
PCI_IRQ_MASK_OFS = 0x1d5c,
|
|
PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */
|
|
|
|
HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
|
|
HC_MAIN_IRQ_MASK_OFS = 0x1d64,
|
|
PORT0_ERR = (1 << 0), /* shift by port # */
|
|
PORT0_DONE = (1 << 1), /* shift by port # */
|
|
HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */
|
|
HC_SHIFT = 9, /* bits 9-17 = HC1's ports */
|
|
PCI_ERR = (1 << 18),
|
|
TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */
|
|
TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */
|
|
PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */
|
|
GPIO_INT = (1 << 22),
|
|
SELF_INT = (1 << 23),
|
|
TWSI_INT = (1 << 24),
|
|
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
|
|
HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
|
|
PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
|
|
HC_MAIN_RSVD),
|
|
|
|
/* SATAHC registers */
|
|
HC_CFG_OFS = 0,
|
|
|
|
HC_IRQ_CAUSE_OFS = 0x14,
|
|
CRPB_DMA_DONE = (1 << 0), /* shift by port # */
|
|
HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */
|
|
DEV_IRQ = (1 << 8), /* shift by port # */
|
|
|
|
/* Shadow block registers */
|
|
SHD_BLK_OFS = 0x100,
|
|
SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */
|
|
|
|
/* SATA registers */
|
|
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
|
|
SATA_ACTIVE_OFS = 0x350,
|
|
PHY_MODE3 = 0x310,
|
|
PHY_MODE4 = 0x314,
|
|
PHY_MODE2 = 0x330,
|
|
MV5_PHY_MODE = 0x74,
|
|
MV5_LT_MODE = 0x30,
|
|
MV5_PHY_CTL = 0x0C,
|
|
SATA_INTERFACE_CTL = 0x050,
|
|
|
|
MV_M2_PREAMP_MASK = 0x7e0,
|
|
|
|
/* Port registers */
|
|
EDMA_CFG_OFS = 0,
|
|
EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */
|
|
EDMA_CFG_NCQ = (1 << 5),
|
|
EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
|
|
EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
|
|
EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
|
|
|
|
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
|
|
EDMA_ERR_IRQ_MASK_OFS = 0xc,
|
|
EDMA_ERR_D_PAR = (1 << 0),
|
|
EDMA_ERR_PRD_PAR = (1 << 1),
|
|
EDMA_ERR_DEV = (1 << 2),
|
|
EDMA_ERR_DEV_DCON = (1 << 3),
|
|
EDMA_ERR_DEV_CON = (1 << 4),
|
|
EDMA_ERR_SERR = (1 << 5),
|
|
EDMA_ERR_SELF_DIS = (1 << 7),
|
|
EDMA_ERR_BIST_ASYNC = (1 << 8),
|
|
EDMA_ERR_CRBQ_PAR = (1 << 9),
|
|
EDMA_ERR_CRPB_PAR = (1 << 10),
|
|
EDMA_ERR_INTRL_PAR = (1 << 11),
|
|
EDMA_ERR_IORDY = (1 << 12),
|
|
EDMA_ERR_LNK_CTRL_RX = (0xf << 13),
|
|
EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15),
|
|
EDMA_ERR_LNK_DATA_RX = (0xf << 17),
|
|
EDMA_ERR_LNK_CTRL_TX = (0x1f << 21),
|
|
EDMA_ERR_LNK_DATA_TX = (0x1f << 26),
|
|
EDMA_ERR_TRANS_PROTO = (1 << 31),
|
|
EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
|
|
EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR |
|
|
EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR |
|
|
EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 |
|
|
EDMA_ERR_LNK_DATA_RX |
|
|
EDMA_ERR_LNK_DATA_TX |
|
|
EDMA_ERR_TRANS_PROTO),
|
|
|
|
EDMA_REQ_Q_BASE_HI_OFS = 0x10,
|
|
EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
|
|
|
|
EDMA_REQ_Q_OUT_PTR_OFS = 0x18,
|
|
EDMA_REQ_Q_PTR_SHIFT = 5,
|
|
|
|
EDMA_RSP_Q_BASE_HI_OFS = 0x1c,
|
|
EDMA_RSP_Q_IN_PTR_OFS = 0x20,
|
|
EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
|
|
EDMA_RSP_Q_PTR_SHIFT = 3,
|
|
|
|
EDMA_CMD_OFS = 0x28,
|
|
EDMA_EN = (1 << 0),
|
|
EDMA_DS = (1 << 1),
|
|
ATA_RST = (1 << 2),
|
|
|
|
EDMA_IORDY_TMOUT = 0x34,
|
|
EDMA_ARB_CFG = 0x38,
|
|
|
|
/* Host private flags (hp_flags) */
|
|
MV_HP_FLAG_MSI = (1 << 0),
|
|
MV_HP_ERRATA_50XXB0 = (1 << 1),
|
|
MV_HP_ERRATA_50XXB2 = (1 << 2),
|
|
MV_HP_ERRATA_60X1B2 = (1 << 3),
|
|
MV_HP_ERRATA_60X1C0 = (1 << 4),
|
|
MV_HP_50XX = (1 << 5),
|
|
|
|
/* Port private flags (pp_flags) */
|
|
MV_PP_FLAG_EDMA_EN = (1 << 0),
|
|
MV_PP_FLAG_EDMA_DS_ACT = (1 << 1),
|
|
};
|
|
|
|
#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
|
|
#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
|
|
|
|
enum {
|
|
/* Our DMA boundary is determined by an ePRD being unable to handle
|
|
* anything larger than 64KB
|
|
*/
|
|
MV_DMA_BOUNDARY = 0xffffU,
|
|
|
|
EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
|
|
|
|
EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
|
|
};
|
|
|
|
enum chip_type {
|
|
chip_504x,
|
|
chip_508x,
|
|
chip_5080,
|
|
chip_604x,
|
|
chip_608x,
|
|
};
|
|
|
|
/* Command ReQuest Block: 32B */
|
|
struct mv_crqb {
|
|
u32 sg_addr;
|
|
u32 sg_addr_hi;
|
|
u16 ctrl_flags;
|
|
u16 ata_cmd[11];
|
|
};
|
|
|
|
/* Command ResPonse Block: 8B */
|
|
struct mv_crpb {
|
|
u16 id;
|
|
u16 flags;
|
|
u32 tmstmp;
|
|
};
|
|
|
|
/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
|
|
struct mv_sg {
|
|
u32 addr;
|
|
u32 flags_size;
|
|
u32 addr_hi;
|
|
u32 reserved;
|
|
};
|
|
|
|
struct mv_port_priv {
|
|
struct mv_crqb *crqb;
|
|
dma_addr_t crqb_dma;
|
|
struct mv_crpb *crpb;
|
|
dma_addr_t crpb_dma;
|
|
struct mv_sg *sg_tbl;
|
|
dma_addr_t sg_tbl_dma;
|
|
|
|
unsigned req_producer; /* cp of req_in_ptr */
|
|
unsigned rsp_consumer; /* cp of rsp_out_ptr */
|
|
u32 pp_flags;
|
|
};
|
|
|
|
struct mv_port_signal {
|
|
u32 amps;
|
|
u32 pre;
|
|
};
|
|
|
|
struct mv_host_priv;
|
|
struct mv_hw_ops {
|
|
void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int port);
|
|
void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio);
|
|
void (*read_preamp)(struct mv_host_priv *hpriv, int idx,
|
|
void __iomem *mmio);
|
|
int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int n_hc);
|
|
void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
|
|
void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio);
|
|
};
|
|
|
|
struct mv_host_priv {
|
|
u32 hp_flags;
|
|
struct mv_port_signal signal[8];
|
|
const struct mv_hw_ops *ops;
|
|
};
|
|
|
|
static void mv_irq_clear(struct ata_port *ap);
|
|
static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
|
|
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
|
|
static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
|
|
static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
|
|
static void mv_phy_reset(struct ata_port *ap);
|
|
static void __mv_phy_reset(struct ata_port *ap, int can_sleep);
|
|
static void mv_host_stop(struct ata_host_set *host_set);
|
|
static int mv_port_start(struct ata_port *ap);
|
|
static void mv_port_stop(struct ata_port *ap);
|
|
static void mv_qc_prep(struct ata_queued_cmd *qc);
|
|
static int mv_qc_issue(struct ata_queued_cmd *qc);
|
|
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
|
|
struct pt_regs *regs);
|
|
static void mv_eng_timeout(struct ata_port *ap);
|
|
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
|
|
static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int port);
|
|
static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
|
|
static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
|
|
void __iomem *mmio);
|
|
static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int n_hc);
|
|
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
|
|
static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio);
|
|
|
|
static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int port);
|
|
static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
|
|
static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
|
|
void __iomem *mmio);
|
|
static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int n_hc);
|
|
static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
|
|
static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
|
|
static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int port_no);
|
|
static void mv_stop_and_reset(struct ata_port *ap);
|
|
|
|
static struct scsi_host_template mv_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
.can_queue = MV_USE_Q_DEPTH,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = MV_MAX_SG_CT / 2,
|
|
.max_sectors = ATA_MAX_SECTORS,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = MV_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.bios_param = ata_std_bios_param,
|
|
.ordered_flush = 1,
|
|
};
|
|
|
|
static const struct ata_port_operations mv5_ops = {
|
|
.port_disable = ata_port_disable,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.phy_reset = mv_phy_reset,
|
|
|
|
.qc_prep = mv_qc_prep,
|
|
.qc_issue = mv_qc_issue,
|
|
|
|
.eng_timeout = mv_eng_timeout,
|
|
|
|
.irq_handler = mv_interrupt,
|
|
.irq_clear = mv_irq_clear,
|
|
|
|
.scr_read = mv5_scr_read,
|
|
.scr_write = mv5_scr_write,
|
|
|
|
.port_start = mv_port_start,
|
|
.port_stop = mv_port_stop,
|
|
.host_stop = mv_host_stop,
|
|
};
|
|
|
|
static const struct ata_port_operations mv6_ops = {
|
|
.port_disable = ata_port_disable,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.phy_reset = mv_phy_reset,
|
|
|
|
.qc_prep = mv_qc_prep,
|
|
.qc_issue = mv_qc_issue,
|
|
|
|
.eng_timeout = mv_eng_timeout,
|
|
|
|
.irq_handler = mv_interrupt,
|
|
.irq_clear = mv_irq_clear,
|
|
|
|
.scr_read = mv_scr_read,
|
|
.scr_write = mv_scr_write,
|
|
|
|
.port_start = mv_port_start,
|
|
.port_stop = mv_port_stop,
|
|
.host_stop = mv_host_stop,
|
|
};
|
|
|
|
static struct ata_port_info mv_port_info[] = {
|
|
{ /* chip_504x */
|
|
.sht = &mv_sht,
|
|
.host_flags = MV_COMMON_FLAGS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &mv5_ops,
|
|
},
|
|
{ /* chip_508x */
|
|
.sht = &mv_sht,
|
|
.host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &mv5_ops,
|
|
},
|
|
{ /* chip_5080 */
|
|
.sht = &mv_sht,
|
|
.host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &mv5_ops,
|
|
},
|
|
{ /* chip_604x */
|
|
.sht = &mv_sht,
|
|
.host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &mv6_ops,
|
|
},
|
|
{ /* chip_608x */
|
|
.sht = &mv_sht,
|
|
.host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
|
|
MV_FLAG_DUAL_HC),
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &mv6_ops,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id mv_pci_tbl[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_5080},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x},
|
|
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
|
|
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, 0x0241), 0, 0, chip_604x},
|
|
{} /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver mv_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = mv_pci_tbl,
|
|
.probe = mv_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static const struct mv_hw_ops mv5xxx_ops = {
|
|
.phy_errata = mv5_phy_errata,
|
|
.enable_leds = mv5_enable_leds,
|
|
.read_preamp = mv5_read_preamp,
|
|
.reset_hc = mv5_reset_hc,
|
|
.reset_flash = mv5_reset_flash,
|
|
.reset_bus = mv5_reset_bus,
|
|
};
|
|
|
|
static const struct mv_hw_ops mv6xxx_ops = {
|
|
.phy_errata = mv6_phy_errata,
|
|
.enable_leds = mv6_enable_leds,
|
|
.read_preamp = mv6_read_preamp,
|
|
.reset_hc = mv6_reset_hc,
|
|
.reset_flash = mv6_reset_flash,
|
|
.reset_bus = mv_reset_pci_bus,
|
|
};
|
|
|
|
/*
|
|
* Functions
|
|
*/
|
|
|
|
static inline void writelfl(unsigned long data, void __iomem *addr)
|
|
{
|
|
writel(data, addr);
|
|
(void) readl(addr); /* flush to avoid PCI posted write */
|
|
}
|
|
|
|
static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
|
|
{
|
|
return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
|
|
}
|
|
|
|
static inline unsigned int mv_hc_from_port(unsigned int port)
|
|
{
|
|
return port >> MV_PORT_HC_SHIFT;
|
|
}
|
|
|
|
static inline unsigned int mv_hardport_from_port(unsigned int port)
|
|
{
|
|
return port & MV_PORT_MASK;
|
|
}
|
|
|
|
static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
|
|
unsigned int port)
|
|
{
|
|
return mv_hc_base(base, mv_hc_from_port(port));
|
|
}
|
|
|
|
static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port)
|
|
{
|
|
return mv_hc_base_from_port(base, port) +
|
|
MV_SATAHC_ARBTR_REG_SZ +
|
|
(mv_hardport_from_port(port) * MV_PORT_REG_SZ);
|
|
}
|
|
|
|
static inline void __iomem *mv_ap_base(struct ata_port *ap)
|
|
{
|
|
return mv_port_base(ap->host_set->mmio_base, ap->port_no);
|
|
}
|
|
|
|
static inline int mv_get_hc_count(unsigned long host_flags)
|
|
{
|
|
return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
|
|
}
|
|
|
|
static void mv_irq_clear(struct ata_port *ap)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* mv_start_dma - Enable eDMA engine
|
|
* @base: port base address
|
|
* @pp: port private data
|
|
*
|
|
* Verify the local cache of the eDMA state is accurate with an
|
|
* assert.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
|
|
{
|
|
if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
|
|
writelfl(EDMA_EN, base + EDMA_CMD_OFS);
|
|
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
|
|
}
|
|
assert(EDMA_EN & readl(base + EDMA_CMD_OFS));
|
|
}
|
|
|
|
/**
|
|
* mv_stop_dma - Disable eDMA engine
|
|
* @ap: ATA channel to manipulate
|
|
*
|
|
* Verify the local cache of the eDMA state is accurate with an
|
|
* assert.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_stop_dma(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = mv_ap_base(ap);
|
|
struct mv_port_priv *pp = ap->private_data;
|
|
u32 reg;
|
|
int i;
|
|
|
|
if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) {
|
|
/* Disable EDMA if active. The disable bit auto clears.
|
|
*/
|
|
writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
|
|
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
|
|
} else {
|
|
assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)));
|
|
}
|
|
|
|
/* now properly wait for the eDMA to stop */
|
|
for (i = 1000; i > 0; i--) {
|
|
reg = readl(port_mmio + EDMA_CMD_OFS);
|
|
if (!(EDMA_EN & reg)) {
|
|
break;
|
|
}
|
|
udelay(100);
|
|
}
|
|
|
|
if (EDMA_EN & reg) {
|
|
printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id);
|
|
/* FIXME: Consider doing a reset here to recover */
|
|
}
|
|
}
|
|
|
|
#ifdef ATA_DEBUG
|
|
static void mv_dump_mem(void __iomem *start, unsigned bytes)
|
|
{
|
|
int b, w;
|
|
for (b = 0; b < bytes; ) {
|
|
DPRINTK("%p: ", start + b);
|
|
for (w = 0; b < bytes && w < 4; w++) {
|
|
printk("%08x ",readl(start + b));
|
|
b += sizeof(u32);
|
|
}
|
|
printk("\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
|
|
{
|
|
#ifdef ATA_DEBUG
|
|
int b, w;
|
|
u32 dw;
|
|
for (b = 0; b < bytes; ) {
|
|
DPRINTK("%02x: ", b);
|
|
for (w = 0; b < bytes && w < 4; w++) {
|
|
(void) pci_read_config_dword(pdev,b,&dw);
|
|
printk("%08x ",dw);
|
|
b += sizeof(u32);
|
|
}
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
}
|
|
static void mv_dump_all_regs(void __iomem *mmio_base, int port,
|
|
struct pci_dev *pdev)
|
|
{
|
|
#ifdef ATA_DEBUG
|
|
void __iomem *hc_base = mv_hc_base(mmio_base,
|
|
port >> MV_PORT_HC_SHIFT);
|
|
void __iomem *port_base;
|
|
int start_port, num_ports, p, start_hc, num_hcs, hc;
|
|
|
|
if (0 > port) {
|
|
start_hc = start_port = 0;
|
|
num_ports = 8; /* shld be benign for 4 port devs */
|
|
num_hcs = 2;
|
|
} else {
|
|
start_hc = port >> MV_PORT_HC_SHIFT;
|
|
start_port = port;
|
|
num_ports = num_hcs = 1;
|
|
}
|
|
DPRINTK("All registers for port(s) %u-%u:\n", start_port,
|
|
num_ports > 1 ? num_ports - 1 : start_port);
|
|
|
|
if (NULL != pdev) {
|
|
DPRINTK("PCI config space regs:\n");
|
|
mv_dump_pci_cfg(pdev, 0x68);
|
|
}
|
|
DPRINTK("PCI regs:\n");
|
|
mv_dump_mem(mmio_base+0xc00, 0x3c);
|
|
mv_dump_mem(mmio_base+0xd00, 0x34);
|
|
mv_dump_mem(mmio_base+0xf00, 0x4);
|
|
mv_dump_mem(mmio_base+0x1d00, 0x6c);
|
|
for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
|
|
hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT);
|
|
DPRINTK("HC regs (HC %i):\n", hc);
|
|
mv_dump_mem(hc_base, 0x1c);
|
|
}
|
|
for (p = start_port; p < start_port + num_ports; p++) {
|
|
port_base = mv_port_base(mmio_base, p);
|
|
DPRINTK("EDMA regs (port %i):\n",p);
|
|
mv_dump_mem(port_base, 0x54);
|
|
DPRINTK("SATA regs (port %i):\n",p);
|
|
mv_dump_mem(port_base+0x300, 0x60);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static unsigned int mv_scr_offset(unsigned int sc_reg_in)
|
|
{
|
|
unsigned int ofs;
|
|
|
|
switch (sc_reg_in) {
|
|
case SCR_STATUS:
|
|
case SCR_CONTROL:
|
|
case SCR_ERROR:
|
|
ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32));
|
|
break;
|
|
case SCR_ACTIVE:
|
|
ofs = SATA_ACTIVE_OFS; /* active is not with the others */
|
|
break;
|
|
default:
|
|
ofs = 0xffffffffU;
|
|
break;
|
|
}
|
|
return ofs;
|
|
}
|
|
|
|
static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
|
|
{
|
|
unsigned int ofs = mv_scr_offset(sc_reg_in);
|
|
|
|
if (0xffffffffU != ofs) {
|
|
return readl(mv_ap_base(ap) + ofs);
|
|
} else {
|
|
return (u32) ofs;
|
|
}
|
|
}
|
|
|
|
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
|
|
{
|
|
unsigned int ofs = mv_scr_offset(sc_reg_in);
|
|
|
|
if (0xffffffffU != ofs) {
|
|
writelfl(val, mv_ap_base(ap) + ofs);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* mv_host_stop - Host specific cleanup/stop routine.
|
|
* @host_set: host data structure
|
|
*
|
|
* Disable ints, cleanup host memory, call general purpose
|
|
* host_stop.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_host_stop(struct ata_host_set *host_set)
|
|
{
|
|
struct mv_host_priv *hpriv = host_set->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(host_set->dev);
|
|
|
|
if (hpriv->hp_flags & MV_HP_FLAG_MSI) {
|
|
pci_disable_msi(pdev);
|
|
} else {
|
|
pci_intx(pdev, 0);
|
|
}
|
|
kfree(hpriv);
|
|
ata_host_stop(host_set);
|
|
}
|
|
|
|
static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev)
|
|
{
|
|
dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma);
|
|
}
|
|
|
|
/**
|
|
* mv_port_start - Port specific init/start routine.
|
|
* @ap: ATA channel to manipulate
|
|
*
|
|
* Allocate and point to DMA memory, init port private memory,
|
|
* zero indices.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static int mv_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct mv_port_priv *pp;
|
|
void __iomem *port_mmio = mv_ap_base(ap);
|
|
void *mem;
|
|
dma_addr_t mem_dma;
|
|
int rc = -ENOMEM;
|
|
|
|
pp = kmalloc(sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
goto err_out;
|
|
memset(pp, 0, sizeof(*pp));
|
|
|
|
mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
|
|
GFP_KERNEL);
|
|
if (!mem)
|
|
goto err_out_pp;
|
|
memset(mem, 0, MV_PORT_PRIV_DMA_SZ);
|
|
|
|
rc = ata_pad_alloc(ap, dev);
|
|
if (rc)
|
|
goto err_out_priv;
|
|
|
|
/* First item in chunk of DMA memory:
|
|
* 32-slot command request table (CRQB), 32 bytes each in size
|
|
*/
|
|
pp->crqb = mem;
|
|
pp->crqb_dma = mem_dma;
|
|
mem += MV_CRQB_Q_SZ;
|
|
mem_dma += MV_CRQB_Q_SZ;
|
|
|
|
/* Second item:
|
|
* 32-slot command response table (CRPB), 8 bytes each in size
|
|
*/
|
|
pp->crpb = mem;
|
|
pp->crpb_dma = mem_dma;
|
|
mem += MV_CRPB_Q_SZ;
|
|
mem_dma += MV_CRPB_Q_SZ;
|
|
|
|
/* Third item:
|
|
* Table of scatter-gather descriptors (ePRD), 16 bytes each
|
|
*/
|
|
pp->sg_tbl = mem;
|
|
pp->sg_tbl_dma = mem_dma;
|
|
|
|
writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
|
|
EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
|
|
|
|
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
|
|
writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
|
|
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
|
|
|
|
writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
|
|
writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
|
|
|
|
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
|
|
writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
|
|
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
|
|
|
|
pp->req_producer = pp->rsp_consumer = 0;
|
|
|
|
/* Don't turn on EDMA here...do it before DMA commands only. Else
|
|
* we'll be unable to send non-data, PIO, etc due to restricted access
|
|
* to shadow regs.
|
|
*/
|
|
ap->private_data = pp;
|
|
return 0;
|
|
|
|
err_out_priv:
|
|
mv_priv_free(pp, dev);
|
|
err_out_pp:
|
|
kfree(pp);
|
|
err_out:
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* mv_port_stop - Port specific cleanup/stop routine.
|
|
* @ap: ATA channel to manipulate
|
|
*
|
|
* Stop DMA, cleanup port memory.
|
|
*
|
|
* LOCKING:
|
|
* This routine uses the host_set lock to protect the DMA stop.
|
|
*/
|
|
static void mv_port_stop(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct mv_port_priv *pp = ap->private_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ap->host_set->lock, flags);
|
|
mv_stop_dma(ap);
|
|
spin_unlock_irqrestore(&ap->host_set->lock, flags);
|
|
|
|
ap->private_data = NULL;
|
|
ata_pad_free(ap, dev);
|
|
mv_priv_free(pp, dev);
|
|
kfree(pp);
|
|
}
|
|
|
|
/**
|
|
* mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
|
|
* @qc: queued command whose SG list to source from
|
|
*
|
|
* Populate the SG list and mark the last entry.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_fill_sg(struct ata_queued_cmd *qc)
|
|
{
|
|
struct mv_port_priv *pp = qc->ap->private_data;
|
|
unsigned int i = 0;
|
|
struct scatterlist *sg;
|
|
|
|
ata_for_each_sg(sg, qc) {
|
|
dma_addr_t addr;
|
|
u32 sg_len, len, offset;
|
|
|
|
addr = sg_dma_address(sg);
|
|
sg_len = sg_dma_len(sg);
|
|
|
|
while (sg_len) {
|
|
offset = addr & MV_DMA_BOUNDARY;
|
|
len = sg_len;
|
|
if ((offset + sg_len) > 0x10000)
|
|
len = 0x10000 - offset;
|
|
|
|
pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
|
|
pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
|
|
pp->sg_tbl[i].flags_size = cpu_to_le32(len);
|
|
|
|
sg_len -= len;
|
|
addr += len;
|
|
|
|
if (!sg_len && ata_sg_is_last(sg, qc))
|
|
pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
|
|
|
|
i++;
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline unsigned mv_inc_q_index(unsigned *index)
|
|
{
|
|
*index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
|
|
return *index;
|
|
}
|
|
|
|
static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
|
|
{
|
|
*cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
|
|
(last ? CRQB_CMD_LAST : 0);
|
|
}
|
|
|
|
/**
|
|
* mv_qc_prep - Host specific command preparation.
|
|
* @qc: queued command to prepare
|
|
*
|
|
* This routine simply redirects to the general purpose routine
|
|
* if command is not DMA. Else, it handles prep of the CRQB
|
|
* (command request block), does some sanity checking, and calls
|
|
* the SG load routine.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct mv_port_priv *pp = ap->private_data;
|
|
u16 *cw;
|
|
struct ata_taskfile *tf;
|
|
u16 flags = 0;
|
|
|
|
if (ATA_PROT_DMA != qc->tf.protocol) {
|
|
return;
|
|
}
|
|
|
|
/* the req producer index should be the same as we remember it */
|
|
assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
|
|
EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
|
|
pp->req_producer);
|
|
|
|
/* Fill in command request block
|
|
*/
|
|
if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
|
|
flags |= CRQB_FLAG_READ;
|
|
}
|
|
assert(MV_MAX_Q_DEPTH > qc->tag);
|
|
flags |= qc->tag << CRQB_TAG_SHIFT;
|
|
|
|
pp->crqb[pp->req_producer].sg_addr =
|
|
cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
|
|
pp->crqb[pp->req_producer].sg_addr_hi =
|
|
cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
|
|
pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
|
|
|
|
cw = &pp->crqb[pp->req_producer].ata_cmd[0];
|
|
tf = &qc->tf;
|
|
|
|
/* Sadly, the CRQB cannot accomodate all registers--there are
|
|
* only 11 bytes...so we must pick and choose required
|
|
* registers based on the command. So, we drop feature and
|
|
* hob_feature for [RW] DMA commands, but they are needed for
|
|
* NCQ. NCQ will drop hob_nsect.
|
|
*/
|
|
switch (tf->command) {
|
|
case ATA_CMD_READ:
|
|
case ATA_CMD_READ_EXT:
|
|
case ATA_CMD_WRITE:
|
|
case ATA_CMD_WRITE_EXT:
|
|
mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
|
|
break;
|
|
#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
|
|
case ATA_CMD_FPDMA_READ:
|
|
case ATA_CMD_FPDMA_WRITE:
|
|
mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
|
|
break;
|
|
#endif /* FIXME: remove this line when NCQ added */
|
|
default:
|
|
/* The only other commands EDMA supports in non-queued and
|
|
* non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
|
|
* of which are defined/used by Linux. If we get here, this
|
|
* driver needs work.
|
|
*
|
|
* FIXME: modify libata to give qc_prep a return value and
|
|
* return error here.
|
|
*/
|
|
BUG_ON(tf->command);
|
|
break;
|
|
}
|
|
mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
|
|
mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
|
|
|
|
if (!(qc->flags & ATA_QCFLAG_DMAMAP)) {
|
|
return;
|
|
}
|
|
mv_fill_sg(qc);
|
|
}
|
|
|
|
/**
|
|
* mv_qc_issue - Initiate a command to the host
|
|
* @qc: queued command to start
|
|
*
|
|
* This routine simply redirects to the general purpose routine
|
|
* if command is not DMA. Else, it sanity checks our local
|
|
* caches of the request producer/consumer indices then enables
|
|
* DMA and bumps the request producer index.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static int mv_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
void __iomem *port_mmio = mv_ap_base(qc->ap);
|
|
struct mv_port_priv *pp = qc->ap->private_data;
|
|
u32 in_ptr;
|
|
|
|
if (ATA_PROT_DMA != qc->tf.protocol) {
|
|
/* We're about to send a non-EDMA capable command to the
|
|
* port. Turn off EDMA so there won't be problems accessing
|
|
* shadow block, etc registers.
|
|
*/
|
|
mv_stop_dma(qc->ap);
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
|
|
|
|
/* the req producer index should be the same as we remember it */
|
|
assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
|
|
pp->req_producer);
|
|
/* until we do queuing, the queue should be empty at this point */
|
|
assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
|
|
((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
|
|
EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
|
|
|
|
mv_inc_q_index(&pp->req_producer); /* now incr producer index */
|
|
|
|
mv_start_dma(port_mmio, pp);
|
|
|
|
/* and write the request in pointer to kick the EDMA to life */
|
|
in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
|
|
in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
|
|
writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mv_get_crpb_status - get status from most recently completed cmd
|
|
* @ap: ATA channel to manipulate
|
|
*
|
|
* This routine is for use when the port is in DMA mode, when it
|
|
* will be using the CRPB (command response block) method of
|
|
* returning command completion information. We assert indices
|
|
* are good, grab status, and bump the response consumer index to
|
|
* prove that we're up to date.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static u8 mv_get_crpb_status(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = mv_ap_base(ap);
|
|
struct mv_port_priv *pp = ap->private_data;
|
|
u32 out_ptr;
|
|
|
|
out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
|
|
|
|
/* the response consumer index should be the same as we remember it */
|
|
assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
|
|
pp->rsp_consumer);
|
|
|
|
/* increment our consumer index... */
|
|
pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
|
|
|
|
/* and, until we do NCQ, there should only be 1 CRPB waiting */
|
|
assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
|
|
EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
|
|
pp->rsp_consumer);
|
|
|
|
/* write out our inc'd consumer index so EDMA knows we're caught up */
|
|
out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
|
|
out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
|
|
writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
|
|
|
|
/* Return ATA status register for completed CRPB */
|
|
return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* mv_err_intr - Handle error interrupts on the port
|
|
* @ap: ATA channel to manipulate
|
|
*
|
|
* In most cases, just clear the interrupt and move on. However,
|
|
* some cases require an eDMA reset, which is done right before
|
|
* the COMRESET in mv_phy_reset(). The SERR case requires a
|
|
* clear of pending errors in the SATA SERROR register. Finally,
|
|
* if the port disabled DMA, update our cached copy to match.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_err_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = mv_ap_base(ap);
|
|
u32 edma_err_cause, serr = 0;
|
|
|
|
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
|
|
|
|
if (EDMA_ERR_SERR & edma_err_cause) {
|
|
serr = scr_read(ap, SCR_ERROR);
|
|
scr_write_flush(ap, SCR_ERROR, serr);
|
|
}
|
|
if (EDMA_ERR_SELF_DIS & edma_err_cause) {
|
|
struct mv_port_priv *pp = ap->private_data;
|
|
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
|
|
}
|
|
DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
|
|
"SERR: 0x%08x\n", ap->id, edma_err_cause, serr);
|
|
|
|
/* Clear EDMA now that SERR cleanup done */
|
|
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
|
|
|
|
/* check for fatal here and recover if needed */
|
|
if (EDMA_ERR_FATAL & edma_err_cause) {
|
|
mv_stop_and_reset(ap);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* mv_host_intr - Handle all interrupts on the given host controller
|
|
* @host_set: host specific structure
|
|
* @relevant: port error bits relevant to this host controller
|
|
* @hc: which host controller we're to look at
|
|
*
|
|
* Read then write clear the HC interrupt status then walk each
|
|
* port connected to the HC and see if it needs servicing. Port
|
|
* success ints are reported in the HC interrupt status reg, the
|
|
* port error ints are reported in the higher level main
|
|
* interrupt status register and thus are passed in via the
|
|
* 'relevant' argument.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
|
|
unsigned int hc)
|
|
{
|
|
void __iomem *mmio = host_set->mmio_base;
|
|
void __iomem *hc_mmio = mv_hc_base(mmio, hc);
|
|
struct ata_port *ap;
|
|
struct ata_queued_cmd *qc;
|
|
u32 hc_irq_cause;
|
|
int shift, port, port0, hard_port, handled;
|
|
unsigned int err_mask;
|
|
u8 ata_status = 0;
|
|
|
|
if (hc == 0) {
|
|
port0 = 0;
|
|
} else {
|
|
port0 = MV_PORTS_PER_HC;
|
|
}
|
|
|
|
/* we'll need the HC success int register in most cases */
|
|
hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
|
|
if (hc_irq_cause) {
|
|
writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
|
|
}
|
|
|
|
VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
|
|
hc,relevant,hc_irq_cause);
|
|
|
|
for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
|
|
ap = host_set->ports[port];
|
|
hard_port = port & MV_PORT_MASK; /* range 0-3 */
|
|
handled = 0; /* ensure ata_status is set if handled++ */
|
|
|
|
if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
|
|
/* new CRPB on the queue; just one at a time until NCQ
|
|
*/
|
|
ata_status = mv_get_crpb_status(ap);
|
|
handled++;
|
|
} else if ((DEV_IRQ << hard_port) & hc_irq_cause) {
|
|
/* received ATA IRQ; read the status reg to clear INTRQ
|
|
*/
|
|
ata_status = readb((void __iomem *)
|
|
ap->ioaddr.status_addr);
|
|
handled++;
|
|
}
|
|
|
|
if (ap &&
|
|
(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))
|
|
continue;
|
|
|
|
err_mask = ac_err_mask(ata_status);
|
|
|
|
shift = port << 1; /* (port * 2) */
|
|
if (port >= MV_PORTS_PER_HC) {
|
|
shift++; /* skip bit 8 in the HC Main IRQ reg */
|
|
}
|
|
if ((PORT0_ERR << shift) & relevant) {
|
|
mv_err_intr(ap);
|
|
err_mask |= AC_ERR_OTHER;
|
|
handled++;
|
|
}
|
|
|
|
if (handled && ap) {
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (NULL != qc) {
|
|
VPRINTK("port %u IRQ found for qc, "
|
|
"ata_status 0x%x\n", port,ata_status);
|
|
/* mark qc status appropriately */
|
|
if (!(qc->tf.ctl & ATA_NIEN))
|
|
ata_qc_complete(qc, err_mask);
|
|
}
|
|
}
|
|
}
|
|
VPRINTK("EXIT\n");
|
|
}
|
|
|
|
/**
|
|
* mv_interrupt -
|
|
* @irq: unused
|
|
* @dev_instance: private data; in this case the host structure
|
|
* @regs: unused
|
|
*
|
|
* Read the read only register to determine if any host
|
|
* controllers have pending interrupts. If so, call lower level
|
|
* routine to handle. Also check for PCI errors which are only
|
|
* reported here.
|
|
*
|
|
* LOCKING:
|
|
* This routine holds the host_set lock while processing pending
|
|
* interrupts.
|
|
*/
|
|
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
|
|
struct pt_regs *regs)
|
|
{
|
|
struct ata_host_set *host_set = dev_instance;
|
|
unsigned int hc, handled = 0, n_hcs;
|
|
void __iomem *mmio = host_set->mmio_base;
|
|
u32 irq_stat;
|
|
|
|
irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
|
|
|
|
/* check the cases where we either have nothing pending or have read
|
|
* a bogus register value which can indicate HW removal or PCI fault
|
|
*/
|
|
if (!irq_stat || (0xffffffffU == irq_stat)) {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
n_hcs = mv_get_hc_count(host_set->ports[0]->flags);
|
|
spin_lock(&host_set->lock);
|
|
|
|
for (hc = 0; hc < n_hcs; hc++) {
|
|
u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
|
|
if (relevant) {
|
|
mv_host_intr(host_set, relevant, hc);
|
|
handled++;
|
|
}
|
|
}
|
|
if (PCI_ERR & irq_stat) {
|
|
printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
|
|
readl(mmio + PCI_IRQ_CAUSE_OFS));
|
|
|
|
DPRINTK("All regs @ PCI error\n");
|
|
mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev));
|
|
|
|
writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
|
|
handled++;
|
|
}
|
|
spin_unlock(&host_set->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
|
|
{
|
|
void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
|
|
unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
|
|
|
|
return hc_mmio + ofs;
|
|
}
|
|
|
|
static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
|
|
{
|
|
unsigned int ofs;
|
|
|
|
switch (sc_reg_in) {
|
|
case SCR_STATUS:
|
|
case SCR_ERROR:
|
|
case SCR_CONTROL:
|
|
ofs = sc_reg_in * sizeof(u32);
|
|
break;
|
|
default:
|
|
ofs = 0xffffffffU;
|
|
break;
|
|
}
|
|
return ofs;
|
|
}
|
|
|
|
static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
|
|
{
|
|
void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no);
|
|
unsigned int ofs = mv5_scr_offset(sc_reg_in);
|
|
|
|
if (ofs != 0xffffffffU)
|
|
return readl(mmio + ofs);
|
|
else
|
|
return (u32) ofs;
|
|
}
|
|
|
|
static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
|
|
{
|
|
void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no);
|
|
unsigned int ofs = mv5_scr_offset(sc_reg_in);
|
|
|
|
if (ofs != 0xffffffffU)
|
|
writelfl(val, mmio + ofs);
|
|
}
|
|
|
|
static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
|
|
{
|
|
u8 rev_id;
|
|
int early_5080;
|
|
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
|
|
|
|
early_5080 = (pdev->device == 0x5080) && (rev_id == 0);
|
|
|
|
if (!early_5080) {
|
|
u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
|
|
tmp |= (1 << 0);
|
|
writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
|
|
}
|
|
|
|
mv_reset_pci_bus(pdev, mmio);
|
|
}
|
|
|
|
static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
|
|
{
|
|
writel(0x0fcfffff, mmio + MV_FLASH_CTL);
|
|
}
|
|
|
|
static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
|
|
void __iomem *mmio)
|
|
{
|
|
void __iomem *phy_mmio = mv5_phy_base(mmio, idx);
|
|
u32 tmp;
|
|
|
|
tmp = readl(phy_mmio + MV5_PHY_MODE);
|
|
|
|
hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */
|
|
hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */
|
|
}
|
|
|
|
static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
|
|
{
|
|
u32 tmp;
|
|
|
|
writel(0, mmio + MV_GPIO_PORT_CTL);
|
|
|
|
/* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
|
|
|
|
tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
|
|
tmp |= ~(1 << 0);
|
|
writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
|
|
}
|
|
|
|
static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int port)
|
|
{
|
|
void __iomem *phy_mmio = mv5_phy_base(mmio, port);
|
|
const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5);
|
|
u32 tmp;
|
|
int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
|
|
|
|
if (fix_apm_sq) {
|
|
tmp = readl(phy_mmio + MV5_LT_MODE);
|
|
tmp |= (1 << 19);
|
|
writel(tmp, phy_mmio + MV5_LT_MODE);
|
|
|
|
tmp = readl(phy_mmio + MV5_PHY_CTL);
|
|
tmp &= ~0x3;
|
|
tmp |= 0x1;
|
|
writel(tmp, phy_mmio + MV5_PHY_CTL);
|
|
}
|
|
|
|
tmp = readl(phy_mmio + MV5_PHY_MODE);
|
|
tmp &= ~mask;
|
|
tmp |= hpriv->signal[port].pre;
|
|
tmp |= hpriv->signal[port].amps;
|
|
writel(tmp, phy_mmio + MV5_PHY_MODE);
|
|
}
|
|
|
|
|
|
#undef ZERO
|
|
#define ZERO(reg) writel(0, port_mmio + (reg))
|
|
static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int port)
|
|
{
|
|
void __iomem *port_mmio = mv_port_base(mmio, port);
|
|
|
|
writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
|
|
|
|
mv_channel_reset(hpriv, mmio, port);
|
|
|
|
ZERO(0x028); /* command */
|
|
writel(0x11f, port_mmio + EDMA_CFG_OFS);
|
|
ZERO(0x004); /* timer */
|
|
ZERO(0x008); /* irq err cause */
|
|
ZERO(0x00c); /* irq err mask */
|
|
ZERO(0x010); /* rq bah */
|
|
ZERO(0x014); /* rq inp */
|
|
ZERO(0x018); /* rq outp */
|
|
ZERO(0x01c); /* respq bah */
|
|
ZERO(0x024); /* respq outp */
|
|
ZERO(0x020); /* respq inp */
|
|
ZERO(0x02c); /* test control */
|
|
writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
|
|
}
|
|
#undef ZERO
|
|
|
|
#define ZERO(reg) writel(0, hc_mmio + (reg))
|
|
static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int hc)
|
|
{
|
|
void __iomem *hc_mmio = mv_hc_base(mmio, hc);
|
|
u32 tmp;
|
|
|
|
ZERO(0x00c);
|
|
ZERO(0x010);
|
|
ZERO(0x014);
|
|
ZERO(0x018);
|
|
|
|
tmp = readl(hc_mmio + 0x20);
|
|
tmp &= 0x1c1c1c1c;
|
|
tmp |= 0x03030303;
|
|
writel(tmp, hc_mmio + 0x20);
|
|
}
|
|
#undef ZERO
|
|
|
|
static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int n_hc)
|
|
{
|
|
unsigned int hc, port;
|
|
|
|
for (hc = 0; hc < n_hc; hc++) {
|
|
for (port = 0; port < MV_PORTS_PER_HC; port++)
|
|
mv5_reset_hc_port(hpriv, mmio,
|
|
(hc * MV_PORTS_PER_HC) + port);
|
|
|
|
mv5_reset_one_hc(hpriv, mmio, hc);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#undef ZERO
|
|
#define ZERO(reg) writel(0, mmio + (reg))
|
|
static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = readl(mmio + MV_PCI_MODE);
|
|
tmp &= 0xff00ffff;
|
|
writel(tmp, mmio + MV_PCI_MODE);
|
|
|
|
ZERO(MV_PCI_DISC_TIMER);
|
|
ZERO(MV_PCI_MSI_TRIGGER);
|
|
writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
|
|
ZERO(HC_MAIN_IRQ_MASK_OFS);
|
|
ZERO(MV_PCI_SERR_MASK);
|
|
ZERO(PCI_IRQ_CAUSE_OFS);
|
|
ZERO(PCI_IRQ_MASK_OFS);
|
|
ZERO(MV_PCI_ERR_LOW_ADDRESS);
|
|
ZERO(MV_PCI_ERR_HIGH_ADDRESS);
|
|
ZERO(MV_PCI_ERR_ATTRIBUTE);
|
|
ZERO(MV_PCI_ERR_COMMAND);
|
|
}
|
|
#undef ZERO
|
|
|
|
static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
|
|
{
|
|
u32 tmp;
|
|
|
|
mv5_reset_flash(hpriv, mmio);
|
|
|
|
tmp = readl(mmio + MV_GPIO_PORT_CTL);
|
|
tmp &= 0x3;
|
|
tmp |= (1 << 5) | (1 << 6);
|
|
writel(tmp, mmio + MV_GPIO_PORT_CTL);
|
|
}
|
|
|
|
/**
|
|
* mv6_reset_hc - Perform the 6xxx global soft reset
|
|
* @mmio: base address of the HBA
|
|
*
|
|
* This routine only applies to 6xxx parts.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int n_hc)
|
|
{
|
|
void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS;
|
|
int i, rc = 0;
|
|
u32 t;
|
|
|
|
/* Following procedure defined in PCI "main command and status
|
|
* register" table.
|
|
*/
|
|
t = readl(reg);
|
|
writel(t | STOP_PCI_MASTER, reg);
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
udelay(1);
|
|
t = readl(reg);
|
|
if (PCI_MASTER_EMPTY & t) {
|
|
break;
|
|
}
|
|
}
|
|
if (!(PCI_MASTER_EMPTY & t)) {
|
|
printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
|
|
rc = 1;
|
|
goto done;
|
|
}
|
|
|
|
/* set reset */
|
|
i = 5;
|
|
do {
|
|
writel(t | GLOB_SFT_RST, reg);
|
|
t = readl(reg);
|
|
udelay(1);
|
|
} while (!(GLOB_SFT_RST & t) && (i-- > 0));
|
|
|
|
if (!(GLOB_SFT_RST & t)) {
|
|
printk(KERN_ERR DRV_NAME ": can't set global reset\n");
|
|
rc = 1;
|
|
goto done;
|
|
}
|
|
|
|
/* clear reset and *reenable the PCI master* (not mentioned in spec) */
|
|
i = 5;
|
|
do {
|
|
writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
|
|
t = readl(reg);
|
|
udelay(1);
|
|
} while ((GLOB_SFT_RST & t) && (i-- > 0));
|
|
|
|
if (GLOB_SFT_RST & t) {
|
|
printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
|
|
rc = 1;
|
|
}
|
|
done:
|
|
return rc;
|
|
}
|
|
|
|
static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
|
|
void __iomem *mmio)
|
|
{
|
|
void __iomem *port_mmio;
|
|
u32 tmp;
|
|
|
|
tmp = readl(mmio + MV_RESET_CFG);
|
|
if ((tmp & (1 << 0)) == 0) {
|
|
hpriv->signal[idx].amps = 0x7 << 8;
|
|
hpriv->signal[idx].pre = 0x1 << 5;
|
|
return;
|
|
}
|
|
|
|
port_mmio = mv_port_base(mmio, idx);
|
|
tmp = readl(port_mmio + PHY_MODE2);
|
|
|
|
hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
|
|
hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
|
|
}
|
|
|
|
static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
|
|
{
|
|
writel(0x00000060, mmio + MV_GPIO_PORT_CTL);
|
|
}
|
|
|
|
static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int port)
|
|
{
|
|
void __iomem *port_mmio = mv_port_base(mmio, port);
|
|
|
|
u32 hp_flags = hpriv->hp_flags;
|
|
int fix_phy_mode2 =
|
|
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
|
|
int fix_phy_mode4 =
|
|
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
|
|
u32 m2, tmp;
|
|
|
|
if (fix_phy_mode2) {
|
|
m2 = readl(port_mmio + PHY_MODE2);
|
|
m2 &= ~(1 << 16);
|
|
m2 |= (1 << 31);
|
|
writel(m2, port_mmio + PHY_MODE2);
|
|
|
|
udelay(200);
|
|
|
|
m2 = readl(port_mmio + PHY_MODE2);
|
|
m2 &= ~((1 << 16) | (1 << 31));
|
|
writel(m2, port_mmio + PHY_MODE2);
|
|
|
|
udelay(200);
|
|
}
|
|
|
|
/* who knows what this magic does */
|
|
tmp = readl(port_mmio + PHY_MODE3);
|
|
tmp &= ~0x7F800000;
|
|
tmp |= 0x2A800000;
|
|
writel(tmp, port_mmio + PHY_MODE3);
|
|
|
|
if (fix_phy_mode4) {
|
|
u32 m4;
|
|
|
|
m4 = readl(port_mmio + PHY_MODE4);
|
|
|
|
if (hp_flags & MV_HP_ERRATA_60X1B2)
|
|
tmp = readl(port_mmio + 0x310);
|
|
|
|
m4 = (m4 & ~(1 << 1)) | (1 << 0);
|
|
|
|
writel(m4, port_mmio + PHY_MODE4);
|
|
|
|
if (hp_flags & MV_HP_ERRATA_60X1B2)
|
|
writel(tmp, port_mmio + 0x310);
|
|
}
|
|
|
|
/* Revert values of pre-emphasis and signal amps to the saved ones */
|
|
m2 = readl(port_mmio + PHY_MODE2);
|
|
|
|
m2 &= ~MV_M2_PREAMP_MASK;
|
|
m2 |= hpriv->signal[port].amps;
|
|
m2 |= hpriv->signal[port].pre;
|
|
m2 &= ~(1 << 16);
|
|
|
|
writel(m2, port_mmio + PHY_MODE2);
|
|
}
|
|
|
|
static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
|
|
unsigned int port_no)
|
|
{
|
|
void __iomem *port_mmio = mv_port_base(mmio, port_no);
|
|
|
|
writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
|
|
|
|
if (IS_60XX(hpriv)) {
|
|
u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
|
|
ifctl |= (1 << 12) | (1 << 7);
|
|
writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
|
|
}
|
|
|
|
udelay(25); /* allow reset propagation */
|
|
|
|
/* Spec never mentions clearing the bit. Marvell's driver does
|
|
* clear the bit, however.
|
|
*/
|
|
writelfl(0, port_mmio + EDMA_CMD_OFS);
|
|
|
|
hpriv->ops->phy_errata(hpriv, mmio, port_no);
|
|
|
|
if (IS_50XX(hpriv))
|
|
mdelay(1);
|
|
}
|
|
|
|
static void mv_stop_and_reset(struct ata_port *ap)
|
|
{
|
|
struct mv_host_priv *hpriv = ap->host_set->private_data;
|
|
void __iomem *mmio = ap->host_set->mmio_base;
|
|
|
|
mv_stop_dma(ap);
|
|
|
|
mv_channel_reset(hpriv, mmio, ap->port_no);
|
|
|
|
__mv_phy_reset(ap, 0);
|
|
}
|
|
|
|
static inline void __msleep(unsigned int msec, int can_sleep)
|
|
{
|
|
if (can_sleep)
|
|
msleep(msec);
|
|
else
|
|
mdelay(msec);
|
|
}
|
|
|
|
/**
|
|
* __mv_phy_reset - Perform eDMA reset followed by COMRESET
|
|
* @ap: ATA channel to manipulate
|
|
*
|
|
* Part of this is taken from __sata_phy_reset and modified to
|
|
* not sleep since this routine gets called from interrupt level.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller. This is coded to safe to call at
|
|
* interrupt level, i.e. it does not sleep.
|
|
*/
|
|
static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
|
|
{
|
|
struct mv_port_priv *pp = ap->private_data;
|
|
struct mv_host_priv *hpriv = ap->host_set->private_data;
|
|
void __iomem *port_mmio = mv_ap_base(ap);
|
|
struct ata_taskfile tf;
|
|
struct ata_device *dev = &ap->device[0];
|
|
unsigned long timeout;
|
|
int retry = 5;
|
|
u32 sstatus;
|
|
|
|
VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
|
|
|
|
DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
|
|
"SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
|
|
mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
|
|
|
|
/* Issue COMRESET via SControl */
|
|
comreset_retry:
|
|
scr_write_flush(ap, SCR_CONTROL, 0x301);
|
|
__msleep(1, can_sleep);
|
|
|
|
scr_write_flush(ap, SCR_CONTROL, 0x300);
|
|
__msleep(20, can_sleep);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(200);
|
|
do {
|
|
sstatus = scr_read(ap, SCR_STATUS) & 0x3;
|
|
if ((sstatus == 3) || (sstatus == 0))
|
|
break;
|
|
|
|
__msleep(1, can_sleep);
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
/* work around errata */
|
|
if (IS_60XX(hpriv) &&
|
|
(sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
|
|
(retry-- > 0))
|
|
goto comreset_retry;
|
|
|
|
DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
|
|
"SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
|
|
mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
|
|
|
|
if (sata_dev_present(ap)) {
|
|
ata_port_probe(ap);
|
|
} else {
|
|
printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n",
|
|
ap->id, scr_read(ap, SCR_STATUS));
|
|
ata_port_disable(ap);
|
|
return;
|
|
}
|
|
ap->cbl = ATA_CBL_SATA;
|
|
|
|
/* even after SStatus reflects that device is ready,
|
|
* it seems to take a while for link to be fully
|
|
* established (and thus Status no longer 0x80/0x7F),
|
|
* so we poll a bit for that, here.
|
|
*/
|
|
retry = 20;
|
|
while (1) {
|
|
u8 drv_stat = ata_check_status(ap);
|
|
if ((drv_stat != 0x80) && (drv_stat != 0x7f))
|
|
break;
|
|
__msleep(500, can_sleep);
|
|
if (retry-- <= 0)
|
|
break;
|
|
}
|
|
|
|
tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr);
|
|
tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr);
|
|
tf.lbal = readb((void __iomem *) ap->ioaddr.lbal_addr);
|
|
tf.nsect = readb((void __iomem *) ap->ioaddr.nsect_addr);
|
|
|
|
dev->class = ata_dev_classify(&tf);
|
|
if (!ata_dev_present(dev)) {
|
|
VPRINTK("Port disabled post-sig: No device present.\n");
|
|
ata_port_disable(ap);
|
|
}
|
|
|
|
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
|
|
|
|
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
|
|
|
|
VPRINTK("EXIT\n");
|
|
}
|
|
|
|
static void mv_phy_reset(struct ata_port *ap)
|
|
{
|
|
__mv_phy_reset(ap, 1);
|
|
}
|
|
|
|
/**
|
|
* mv_eng_timeout - Routine called by libata when SCSI times out I/O
|
|
* @ap: ATA channel to manipulate
|
|
*
|
|
* Intent is to clear all pending error conditions, reset the
|
|
* chip/bus, fail the command, and move on.
|
|
*
|
|
* LOCKING:
|
|
* This routine holds the host_set lock while failing the command.
|
|
*/
|
|
static void mv_eng_timeout(struct ata_port *ap)
|
|
{
|
|
struct ata_queued_cmd *qc;
|
|
unsigned long flags;
|
|
|
|
printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
|
|
DPRINTK("All regs @ start of eng_timeout\n");
|
|
mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no,
|
|
to_pci_dev(ap->host_set->dev));
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
|
|
ap->host_set->mmio_base, ap, qc, qc->scsicmd,
|
|
&qc->scsicmd->cmnd);
|
|
|
|
mv_err_intr(ap);
|
|
mv_stop_and_reset(ap);
|
|
|
|
if (!qc) {
|
|
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
|
|
ap->id);
|
|
} else {
|
|
/* hack alert! We cannot use the supplied completion
|
|
* function from inside the ->eh_strategy_handler() thread.
|
|
* libata is the only user of ->eh_strategy_handler() in
|
|
* any kernel, so the default scsi_done() assumes it is
|
|
* not being called from the SCSI EH.
|
|
*/
|
|
spin_lock_irqsave(&ap->host_set->lock, flags);
|
|
qc->scsidone = scsi_finish_command;
|
|
ata_qc_complete(qc, AC_ERR_OTHER);
|
|
spin_unlock_irqrestore(&ap->host_set->lock, flags);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* mv_port_init - Perform some early initialization on a single port.
|
|
* @port: libata data structure storing shadow register addresses
|
|
* @port_mmio: base address of the port
|
|
*
|
|
* Initialize shadow register mmio addresses, clear outstanding
|
|
* interrupts on the port, and unmask interrupts for the future
|
|
* start of the port.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
|
|
{
|
|
unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS;
|
|
unsigned serr_ofs;
|
|
|
|
/* PIO related setup
|
|
*/
|
|
port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
|
|
port->error_addr =
|
|
port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
|
|
port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
|
|
port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
|
|
port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
|
|
port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
|
|
port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
|
|
port->status_addr =
|
|
port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
|
|
/* special case: control/altstatus doesn't have ATA_REG_ address */
|
|
port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
|
|
|
|
/* unused: */
|
|
port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
|
|
|
|
/* Clear any currently outstanding port interrupt conditions */
|
|
serr_ofs = mv_scr_offset(SCR_ERROR);
|
|
writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
|
|
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
|
|
|
|
/* unmask all EDMA error interrupts */
|
|
writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
|
|
|
|
VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
|
|
readl(port_mmio + EDMA_CFG_OFS),
|
|
readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
|
|
readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
|
|
}
|
|
|
|
static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
|
|
unsigned int board_idx)
|
|
{
|
|
u8 rev_id;
|
|
u32 hp_flags = hpriv->hp_flags;
|
|
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
|
|
|
|
switch(board_idx) {
|
|
case chip_5080:
|
|
hpriv->ops = &mv5xxx_ops;
|
|
hp_flags |= MV_HP_50XX;
|
|
|
|
switch (rev_id) {
|
|
case 0x1:
|
|
hp_flags |= MV_HP_ERRATA_50XXB0;
|
|
break;
|
|
case 0x3:
|
|
hp_flags |= MV_HP_ERRATA_50XXB2;
|
|
break;
|
|
default:
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"Applying 50XXB2 workarounds to unknown rev\n");
|
|
hp_flags |= MV_HP_ERRATA_50XXB2;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case chip_504x:
|
|
case chip_508x:
|
|
hpriv->ops = &mv5xxx_ops;
|
|
hp_flags |= MV_HP_50XX;
|
|
|
|
switch (rev_id) {
|
|
case 0x0:
|
|
hp_flags |= MV_HP_ERRATA_50XXB0;
|
|
break;
|
|
case 0x3:
|
|
hp_flags |= MV_HP_ERRATA_50XXB2;
|
|
break;
|
|
default:
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"Applying B2 workarounds to unknown rev\n");
|
|
hp_flags |= MV_HP_ERRATA_50XXB2;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case chip_604x:
|
|
case chip_608x:
|
|
hpriv->ops = &mv6xxx_ops;
|
|
|
|
switch (rev_id) {
|
|
case 0x7:
|
|
hp_flags |= MV_HP_ERRATA_60X1B2;
|
|
break;
|
|
case 0x9:
|
|
hp_flags |= MV_HP_ERRATA_60X1C0;
|
|
break;
|
|
default:
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"Applying B2 workarounds to unknown rev\n");
|
|
hp_flags |= MV_HP_ERRATA_60X1B2;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
|
|
return 1;
|
|
}
|
|
|
|
hpriv->hp_flags = hp_flags;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mv_init_host - Perform some early initialization of the host.
|
|
* @pdev: host PCI device
|
|
* @probe_ent: early data struct representing the host
|
|
*
|
|
* If possible, do an early global reset of the host. Then do
|
|
* our port init and clear/unmask all/relevant host interrupts.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
|
|
unsigned int board_idx)
|
|
{
|
|
int rc = 0, n_hc, port, hc;
|
|
void __iomem *mmio = probe_ent->mmio_base;
|
|
struct mv_host_priv *hpriv = probe_ent->private_data;
|
|
|
|
/* global interrupt mask */
|
|
writel(0, mmio + HC_MAIN_IRQ_MASK_OFS);
|
|
|
|
rc = mv_chip_id(pdev, hpriv, board_idx);
|
|
if (rc)
|
|
goto done;
|
|
|
|
n_hc = mv_get_hc_count(probe_ent->host_flags);
|
|
probe_ent->n_ports = MV_PORTS_PER_HC * n_hc;
|
|
|
|
for (port = 0; port < probe_ent->n_ports; port++)
|
|
hpriv->ops->read_preamp(hpriv, port, mmio);
|
|
|
|
rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
|
|
if (rc)
|
|
goto done;
|
|
|
|
hpriv->ops->reset_flash(hpriv, mmio);
|
|
hpriv->ops->reset_bus(pdev, mmio);
|
|
hpriv->ops->enable_leds(hpriv, mmio);
|
|
|
|
for (port = 0; port < probe_ent->n_ports; port++) {
|
|
if (IS_60XX(hpriv)) {
|
|
void __iomem *port_mmio = mv_port_base(mmio, port);
|
|
|
|
u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
|
|
ifctl |= (1 << 12);
|
|
writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
|
|
}
|
|
|
|
hpriv->ops->phy_errata(hpriv, mmio, port);
|
|
}
|
|
|
|
for (port = 0; port < probe_ent->n_ports; port++) {
|
|
void __iomem *port_mmio = mv_port_base(mmio, port);
|
|
mv_port_init(&probe_ent->port[port], port_mmio);
|
|
}
|
|
|
|
for (hc = 0; hc < n_hc; hc++) {
|
|
void __iomem *hc_mmio = mv_hc_base(mmio, hc);
|
|
|
|
VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
|
|
"(before clear)=0x%08x\n", hc,
|
|
readl(hc_mmio + HC_CFG_OFS),
|
|
readl(hc_mmio + HC_IRQ_CAUSE_OFS));
|
|
|
|
/* Clear any currently outstanding hc interrupt conditions */
|
|
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
|
|
}
|
|
|
|
/* Clear any currently outstanding host interrupt conditions */
|
|
writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
|
|
|
|
/* and unmask interrupt generation for host regs */
|
|
writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
|
|
writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
|
|
|
|
VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
|
|
"PCI int cause/mask=0x%08x/0x%08x\n",
|
|
readl(mmio + HC_MAIN_IRQ_CAUSE_OFS),
|
|
readl(mmio + HC_MAIN_IRQ_MASK_OFS),
|
|
readl(mmio + PCI_IRQ_CAUSE_OFS),
|
|
readl(mmio + PCI_IRQ_MASK_OFS));
|
|
|
|
done:
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* mv_print_info - Dump key info to kernel log for perusal.
|
|
* @probe_ent: early data struct representing the host
|
|
*
|
|
* FIXME: complete this.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static void mv_print_info(struct ata_probe_ent *probe_ent)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
|
|
struct mv_host_priv *hpriv = probe_ent->private_data;
|
|
u8 rev_id, scc;
|
|
const char *scc_s;
|
|
|
|
/* Use this to determine the HW stepping of the chip so we know
|
|
* what errata to workaround
|
|
*/
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
|
|
|
|
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
|
|
if (scc == 0)
|
|
scc_s = "SCSI";
|
|
else if (scc == 0x01)
|
|
scc_s = "RAID";
|
|
else
|
|
scc_s = "unknown";
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"%u slots %u ports %s mode IRQ via %s\n",
|
|
(unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
|
|
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
|
|
}
|
|
|
|
/**
|
|
* mv_init_one - handle a positive probe of a Marvell host
|
|
* @pdev: PCI device found
|
|
* @ent: PCI device ID entry for the matched host
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version = 0;
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
struct mv_host_priv *hpriv;
|
|
unsigned int board_idx = (unsigned int)ent->driver_data;
|
|
void __iomem *mmio_base;
|
|
int pci_dev_busy = 0, rc;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc) {
|
|
pci_dev_busy = 1;
|
|
goto err_out;
|
|
}
|
|
|
|
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
|
|
if (probe_ent == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_regions;
|
|
}
|
|
|
|
memset(probe_ent, 0, sizeof(*probe_ent));
|
|
probe_ent->dev = pci_dev_to_dev(pdev);
|
|
INIT_LIST_HEAD(&probe_ent->node);
|
|
|
|
mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0);
|
|
if (mmio_base == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_free_ent;
|
|
}
|
|
|
|
hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv) {
|
|
rc = -ENOMEM;
|
|
goto err_out_iounmap;
|
|
}
|
|
memset(hpriv, 0, sizeof(*hpriv));
|
|
|
|
probe_ent->sht = mv_port_info[board_idx].sht;
|
|
probe_ent->host_flags = mv_port_info[board_idx].host_flags;
|
|
probe_ent->pio_mask = mv_port_info[board_idx].pio_mask;
|
|
probe_ent->udma_mask = mv_port_info[board_idx].udma_mask;
|
|
probe_ent->port_ops = mv_port_info[board_idx].port_ops;
|
|
|
|
probe_ent->irq = pdev->irq;
|
|
probe_ent->irq_flags = SA_SHIRQ;
|
|
probe_ent->mmio_base = mmio_base;
|
|
probe_ent->private_data = hpriv;
|
|
|
|
/* initialize adapter */
|
|
rc = mv_init_host(pdev, probe_ent, board_idx);
|
|
if (rc) {
|
|
goto err_out_hpriv;
|
|
}
|
|
|
|
/* Enable interrupts */
|
|
if (pci_enable_msi(pdev) == 0) {
|
|
hpriv->hp_flags |= MV_HP_FLAG_MSI;
|
|
} else {
|
|
pci_intx(pdev, 1);
|
|
}
|
|
|
|
mv_dump_pci_cfg(pdev, 0x68);
|
|
mv_print_info(probe_ent);
|
|
|
|
if (ata_device_add(probe_ent) == 0) {
|
|
rc = -ENODEV; /* No devices discovered */
|
|
goto err_out_dev_add;
|
|
}
|
|
|
|
kfree(probe_ent);
|
|
return 0;
|
|
|
|
err_out_dev_add:
|
|
if (MV_HP_FLAG_MSI & hpriv->hp_flags) {
|
|
pci_disable_msi(pdev);
|
|
} else {
|
|
pci_intx(pdev, 0);
|
|
}
|
|
err_out_hpriv:
|
|
kfree(hpriv);
|
|
err_out_iounmap:
|
|
pci_iounmap(pdev, mmio_base);
|
|
err_out_free_ent:
|
|
kfree(probe_ent);
|
|
err_out_regions:
|
|
pci_release_regions(pdev);
|
|
err_out:
|
|
if (!pci_dev_busy) {
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int __init mv_init(void)
|
|
{
|
|
return pci_module_init(&mv_pci_driver);
|
|
}
|
|
|
|
static void __exit mv_exit(void)
|
|
{
|
|
pci_unregister_driver(&mv_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Brett Russ");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(mv_init);
|
|
module_exit(mv_exit);
|