![Stuart Menefy](/assets/img/avatar_default.png)
This takes care of tearing down the UBC so it's not inadvertently left configured at the next context switch time. Failure to do this results in spurious SIGTRAPs in certain debug sequences. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
412 lines
8.4 KiB
ArmAsm
412 lines
8.4 KiB
ArmAsm
/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $
|
|
*
|
|
* linux/arch/sh/entry.S
|
|
*
|
|
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
|
|
* Copyright (C) 2003 Paul Mundt
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
*/
|
|
|
|
! NOTE:
|
|
! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
|
|
! to be jumped is too far, but it causes illegal slot exception.
|
|
|
|
/*
|
|
* entry.S contains the system-call and fault low-level handling routines.
|
|
* This also contains the timer-interrupt handler, as well as all interrupts
|
|
* and faults that can result in a task-switch.
|
|
*
|
|
* NOTE: This code handles signal-recognition, which happens every time
|
|
* after a timer-interrupt and after each system call.
|
|
*
|
|
* NOTE: This code uses a convention that instructions in the delay slot
|
|
* of a transfer-control instruction are indented by an extra space, thus:
|
|
*
|
|
* jmp @k0 ! control-transfer instruction
|
|
* ldc k1, ssr ! delay slot
|
|
*
|
|
* Stack layout in 'ret_from_syscall':
|
|
* ptrace needs to have all regs on the stack.
|
|
* if the order here is changed, it needs to be
|
|
* updated in ptrace.c and ptrace.h
|
|
*
|
|
* r0
|
|
* ...
|
|
* r15 = stack pointer
|
|
* spc
|
|
* pr
|
|
* ssr
|
|
* gbr
|
|
* mach
|
|
* macl
|
|
* syscall #
|
|
*
|
|
*/
|
|
|
|
#if defined(CONFIG_PREEMPT)
|
|
# define preempt_stop() cli
|
|
#else
|
|
# define preempt_stop()
|
|
# define resume_kernel __restore_all
|
|
#endif
|
|
|
|
|
|
.align 2
|
|
ENTRY(exception_error)
|
|
!
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 2f, r0
|
|
jsr @r0
|
|
nop
|
|
#endif
|
|
sti
|
|
mov.l 1f, r0
|
|
jmp @r0
|
|
nop
|
|
|
|
.align 2
|
|
1: .long do_exception_error
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
2: .long trace_hardirqs_on
|
|
#endif
|
|
|
|
.align 2
|
|
ret_from_exception:
|
|
preempt_stop()
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 4f, r0
|
|
jsr @r0
|
|
nop
|
|
#endif
|
|
ENTRY(ret_from_irq)
|
|
!
|
|
mov #OFF_SR, r0
|
|
mov.l @(r0,r15), r0 ! get status register
|
|
shll r0
|
|
shll r0 ! kernel space?
|
|
get_current_thread_info r8, r0
|
|
bt resume_kernel ! Yes, it's from kernel, go back soon
|
|
|
|
#ifdef CONFIG_PREEMPT
|
|
bra resume_userspace
|
|
nop
|
|
ENTRY(resume_kernel)
|
|
mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
|
|
tst r0, r0
|
|
bf noresched
|
|
need_resched:
|
|
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
|
|
tst #_TIF_NEED_RESCHED, r0 ! need_resched set?
|
|
bt noresched
|
|
|
|
mov #OFF_SR, r0
|
|
mov.l @(r0,r15), r0 ! get status register
|
|
and #0xf0, r0 ! interrupts off (exception path)?
|
|
cmp/eq #0xf0, r0
|
|
bt noresched
|
|
|
|
mov.l 1f, r0
|
|
mov.l r0, @(TI_PRE_COUNT,r8)
|
|
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 3f, r0
|
|
jsr @r0
|
|
nop
|
|
#endif
|
|
sti
|
|
mov.l 2f, r0
|
|
jsr @r0
|
|
nop
|
|
mov #0, r0
|
|
mov.l r0, @(TI_PRE_COUNT,r8)
|
|
cli
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 4f, r0
|
|
jsr @r0
|
|
nop
|
|
#endif
|
|
|
|
bra need_resched
|
|
nop
|
|
|
|
noresched:
|
|
bra __restore_all
|
|
nop
|
|
|
|
.align 2
|
|
1: .long PREEMPT_ACTIVE
|
|
2: .long schedule
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
3: .long trace_hardirqs_on
|
|
4: .long trace_hardirqs_off
|
|
#endif
|
|
#endif
|
|
|
|
ENTRY(resume_userspace)
|
|
! r8: current_thread_info
|
|
cli
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 5f, r0
|
|
jsr @r0
|
|
nop
|
|
#endif
|
|
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
|
|
tst #_TIF_WORK_MASK, r0
|
|
bt/s __restore_all
|
|
tst #_TIF_NEED_RESCHED, r0
|
|
|
|
.align 2
|
|
work_pending:
|
|
! r0: current_thread_info->flags
|
|
! r8: current_thread_info
|
|
! t: result of "tst #_TIF_NEED_RESCHED, r0"
|
|
bf/s work_resched
|
|
tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0
|
|
work_notifysig:
|
|
bt/s __restore_all
|
|
mov r15, r4
|
|
mov r12, r5 ! set arg1(save_r0)
|
|
mov r0, r6
|
|
mov.l 2f, r1
|
|
mov.l 3f, r0
|
|
jmp @r1
|
|
lds r0, pr
|
|
work_resched:
|
|
#ifndef CONFIG_PREEMPT
|
|
! gUSA handling
|
|
mov.l @(OFF_SP,r15), r0 ! get user space stack pointer
|
|
mov r0, r1
|
|
shll r0
|
|
bf/s 1f
|
|
shll r0
|
|
bf/s 1f
|
|
mov #OFF_PC, r0
|
|
! SP >= 0xc0000000 : gUSA mark
|
|
mov.l @(r0,r15), r2 ! get user space PC (program counter)
|
|
mov.l @(OFF_R0,r15), r3 ! end point
|
|
cmp/hs r3, r2 ! r2 >= r3?
|
|
bt 1f
|
|
add r3, r1 ! rewind point #2
|
|
mov.l r1, @(r0,r15) ! reset PC to rewind point #2
|
|
!
|
|
1:
|
|
#endif
|
|
mov.l 1f, r1
|
|
jsr @r1 ! schedule
|
|
nop
|
|
cli
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 5f, r0
|
|
jsr @r0
|
|
nop
|
|
#endif
|
|
!
|
|
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
|
|
tst #_TIF_WORK_MASK, r0
|
|
bt __restore_all
|
|
bra work_pending
|
|
tst #_TIF_NEED_RESCHED, r0
|
|
|
|
.align 2
|
|
1: .long schedule
|
|
2: .long do_notify_resume
|
|
3: .long restore_all
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
4: .long trace_hardirqs_on
|
|
5: .long trace_hardirqs_off
|
|
#endif
|
|
|
|
.align 2
|
|
syscall_exit_work:
|
|
! r0: current_thread_info->flags
|
|
! r8: current_thread_info
|
|
tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP, r0
|
|
bt/s work_pending
|
|
tst #_TIF_NEED_RESCHED, r0
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 5f, r0
|
|
jsr @r0
|
|
nop
|
|
#endif
|
|
sti
|
|
! XXX setup arguments...
|
|
mov.l 4f, r0 ! do_syscall_trace
|
|
jsr @r0
|
|
nop
|
|
bra resume_userspace
|
|
nop
|
|
|
|
.align 2
|
|
syscall_trace_entry:
|
|
! Yes it is traced.
|
|
! XXX setup arguments...
|
|
mov.l 4f, r11 ! Call do_syscall_trace which notifies
|
|
jsr @r11 ! superior (will chomp R[0-7])
|
|
nop
|
|
! Reload R0-R4 from kernel stack, where the
|
|
! parent may have modified them using
|
|
! ptrace(POKEUSR). (Note that R0-R2 are
|
|
! used by the system call handler directly
|
|
! from the kernel stack anyway, so don't need
|
|
! to be reloaded here.) This allows the parent
|
|
! to rewrite system calls and args on the fly.
|
|
mov.l @(OFF_R4,r15), r4 ! arg0
|
|
mov.l @(OFF_R5,r15), r5
|
|
mov.l @(OFF_R6,r15), r6
|
|
mov.l @(OFF_R7,r15), r7 ! arg3
|
|
mov.l @(OFF_R3,r15), r3 ! syscall_nr
|
|
!
|
|
mov.l 2f, r10 ! Number of syscalls
|
|
cmp/hs r10, r3
|
|
bf syscall_call
|
|
mov #-ENOSYS, r0
|
|
bra syscall_exit
|
|
mov.l r0, @(OFF_R0,r15) ! Return value
|
|
|
|
__restore_all:
|
|
mov.l 1f, r0
|
|
jmp @r0
|
|
nop
|
|
|
|
.align 2
|
|
1: .long restore_all
|
|
|
|
.align 2
|
|
syscall_badsys: ! Bad syscall number
|
|
mov #-ENOSYS, r0
|
|
bra resume_userspace
|
|
mov.l r0, @(OFF_R0,r15) ! Return value
|
|
|
|
/*
|
|
* The main debug trap handler.
|
|
*
|
|
* r8=TRA (not the trap number!)
|
|
*
|
|
* Note: This assumes that the trapa value is left in its original
|
|
* form (without the shlr2 shift) so the calculation for the jump
|
|
* call table offset remains a simple in place mask.
|
|
*/
|
|
debug_trap:
|
|
mov r8, r0
|
|
and #(0xf << 2), r0
|
|
mov.l 1f, r8
|
|
add r0, r8
|
|
mov.l @r8, r8
|
|
jmp @r8
|
|
nop
|
|
|
|
.align 2
|
|
1: .long debug_trap_table
|
|
|
|
/*
|
|
* Syscall interface:
|
|
*
|
|
* Syscall #: R3
|
|
* Arguments #0 to #3: R4--R7
|
|
* Arguments #4 to #6: R0, R1, R2
|
|
* TRA: (number of arguments + ABI revision) x 4
|
|
*
|
|
* This code also handles delegating other traps to the BIOS/gdb stub
|
|
* according to:
|
|
*
|
|
* Trap number
|
|
* (TRA>>2) Purpose
|
|
* -------- -------
|
|
* 0x00-0x0f original SH-3/4 syscall ABI (not in general use).
|
|
* 0x10-0x1f general SH-3/4 syscall ABI.
|
|
* 0x20-0x2f syscall ABI for SH-2 parts.
|
|
* 0x30-0x3f debug traps used by the kernel.
|
|
* 0x40-0xff Not supported by all parts, so left unhandled.
|
|
*
|
|
* Note: When we're first called, the TRA value must be shifted
|
|
* right 2 bits in order to get the value that was used as the "trapa"
|
|
* argument.
|
|
*/
|
|
|
|
.align 2
|
|
.globl ret_from_fork
|
|
ret_from_fork:
|
|
mov.l 1f, r8
|
|
jsr @r8
|
|
mov r0, r4
|
|
bra syscall_exit
|
|
nop
|
|
.align 2
|
|
1: .long schedule_tail
|
|
|
|
/*
|
|
* The poorly named main trapa decode and dispatch routine, for
|
|
* system calls and debug traps through their respective jump tables.
|
|
*/
|
|
ENTRY(system_call)
|
|
#if !defined(CONFIG_CPU_SH2)
|
|
mov.l 1f, r9
|
|
mov.l @r9, r8 ! Read from TRA (Trap Address) Register
|
|
#endif
|
|
/*
|
|
* Check the trap type
|
|
*/
|
|
mov #((0x20 << 2) - 1), r9
|
|
cmp/hi r9, r8
|
|
bt/s debug_trap ! it's a debug trap..
|
|
mov #OFF_TRA, r9
|
|
add r15, r9
|
|
mov.l r8, @r9 ! set TRA value to tra
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 5f, r10
|
|
jsr @r10
|
|
nop
|
|
#endif
|
|
sti
|
|
|
|
!
|
|
get_current_thread_info r8, r10
|
|
mov.l @(TI_FLAGS,r8), r8
|
|
mov #_TIF_SYSCALL_TRACE, r10
|
|
tst r10, r8
|
|
bf syscall_trace_entry
|
|
!
|
|
mov.l 2f, r8 ! Number of syscalls
|
|
cmp/hs r8, r3
|
|
bt syscall_badsys
|
|
!
|
|
syscall_call:
|
|
shll2 r3 ! x4
|
|
mov.l 3f, r8 ! Load the address of sys_call_table
|
|
add r8, r3
|
|
mov.l @r3, r8
|
|
jsr @r8 ! jump to specific syscall handler
|
|
nop
|
|
mov.l @(OFF_R0,r15), r12 ! save r0
|
|
mov.l r0, @(OFF_R0,r15) ! save the return value
|
|
!
|
|
syscall_exit:
|
|
cli
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
mov.l 6f, r0
|
|
jsr @r0
|
|
nop
|
|
#endif
|
|
!
|
|
get_current_thread_info r8, r0
|
|
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
|
|
tst #_TIF_ALLWORK_MASK, r0
|
|
bf syscall_exit_work
|
|
bra __restore_all
|
|
nop
|
|
.align 2
|
|
#if !defined(CONFIG_CPU_SH2)
|
|
1: .long TRA
|
|
#endif
|
|
2: .long NR_syscalls
|
|
3: .long sys_call_table
|
|
4: .long do_syscall_trace
|
|
#ifdef CONFIG_TRACE_IRQFLAGS
|
|
5: .long trace_hardirqs_on
|
|
6: .long trace_hardirqs_off
|
|
#endif
|