![Jörn Engel](/assets/img/avatar_default.png)
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
281 lines
8.3 KiB
C
281 lines
8.3 KiB
C
/*
|
|
* linux/drivers/serial/cpm_uart.c
|
|
*
|
|
* Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
|
|
*
|
|
* Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
|
|
* Pantelis Antoniou (panto@intracom.gr) (CPM1)
|
|
*
|
|
* Copyright (C) 2004 Freescale Semiconductor, Inc.
|
|
* (C) 2004 Intracom, S.A.
|
|
* (C) 2006 MontaVista Software, Inc.
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <linux/serial_core.h>
|
|
#include <linux/kernel.h>
|
|
|
|
#include "cpm_uart.h"
|
|
|
|
/**************************************************************/
|
|
|
|
void cpm_line_cr_cmd(int line, int cmd)
|
|
{
|
|
ushort val;
|
|
volatile cpm8xx_t *cp = cpmp;
|
|
|
|
switch (line) {
|
|
case UART_SMC1:
|
|
val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SMC2:
|
|
val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SCC1:
|
|
val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SCC2:
|
|
val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SCC3:
|
|
val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
|
|
break;
|
|
case UART_SCC4:
|
|
val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
|
|
break;
|
|
default:
|
|
return;
|
|
|
|
}
|
|
cp->cp_cpcr = val;
|
|
while (cp->cp_cpcr & CPM_CR_FLG) ;
|
|
}
|
|
|
|
void smc1_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
pinfo->brg = 1;
|
|
}
|
|
|
|
void smc2_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
pinfo->brg = 2;
|
|
}
|
|
|
|
void scc1_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
/* XXX SCC1: insert port configuration here */
|
|
pinfo->brg = 1;
|
|
}
|
|
|
|
void scc2_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
/* XXX SCC2: insert port configuration here */
|
|
pinfo->brg = 2;
|
|
}
|
|
|
|
void scc3_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
/* XXX SCC3: insert port configuration here */
|
|
pinfo->brg = 3;
|
|
}
|
|
|
|
void scc4_lineif(struct uart_cpm_port *pinfo)
|
|
{
|
|
/* XXX SCC4: insert port configuration here */
|
|
pinfo->brg = 4;
|
|
}
|
|
|
|
/*
|
|
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
|
|
* receive buffer descriptors from dual port ram, and a character
|
|
* buffer area from host mem. If we are allocating for the console we need
|
|
* to do it from bootmem
|
|
*/
|
|
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
|
|
{
|
|
int dpmemsz, memsz;
|
|
u8 *dp_mem;
|
|
uint dp_offset;
|
|
u8 *mem_addr;
|
|
dma_addr_t dma_addr = 0;
|
|
|
|
pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
|
|
|
|
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
|
|
dp_offset = cpm_dpalloc(dpmemsz, 8);
|
|
if (IS_DPERR(dp_offset)) {
|
|
printk(KERN_ERR
|
|
"cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
|
|
return -ENOMEM;
|
|
}
|
|
dp_mem = cpm_dpram_addr(dp_offset);
|
|
|
|
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
|
|
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
|
|
if (is_con) {
|
|
/* was hostalloc but changed cause it blows away the */
|
|
/* large tlb mapping when pinning the kernel area */
|
|
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
|
|
dma_addr = (u32)mem_addr;
|
|
} else
|
|
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
|
|
GFP_KERNEL);
|
|
|
|
if (mem_addr == NULL) {
|
|
cpm_dpfree(dp_offset);
|
|
printk(KERN_ERR
|
|
"cpm_uart_cpm1.c: could not allocate coherent memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pinfo->dp_addr = dp_offset;
|
|
pinfo->mem_addr = mem_addr; /* virtual address*/
|
|
pinfo->dma_addr = dma_addr; /* physical address*/
|
|
pinfo->mem_size = memsz;
|
|
|
|
pinfo->rx_buf = mem_addr;
|
|
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
|
|
* pinfo->rx_fifosize);
|
|
|
|
pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
|
|
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
|
|
{
|
|
dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
|
|
pinfo->rx_fifosize) +
|
|
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
|
|
pinfo->tx_fifosize), pinfo->mem_addr,
|
|
pinfo->dma_addr);
|
|
|
|
cpm_dpfree(pinfo->dp_addr);
|
|
}
|
|
|
|
/* Setup any dynamic params in the uart desc */
|
|
int cpm_uart_init_portdesc(void)
|
|
{
|
|
pr_debug("CPM uart[-]:init portdesc\n");
|
|
|
|
cpm_uart_nr = 0;
|
|
#ifdef CONFIG_SERIAL_CPM_SMC1
|
|
cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
|
|
/*
|
|
* Is SMC1 being relocated?
|
|
*/
|
|
# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
|
|
cpm_uart_ports[UART_SMC1].smcup =
|
|
(smc_uart_t *) & cpmp->cp_dparam[0x3C0];
|
|
# else
|
|
cpm_uart_ports[UART_SMC1].smcup =
|
|
(smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
|
|
# endif
|
|
cpm_uart_ports[UART_SMC1].port.mapbase =
|
|
(unsigned long)&cpmp->cp_smc[0];
|
|
cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
|
|
cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
|
cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SMC2
|
|
cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
|
|
cpm_uart_ports[UART_SMC2].smcup =
|
|
(smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
|
|
cpm_uart_ports[UART_SMC2].port.mapbase =
|
|
(unsigned long)&cpmp->cp_smc[1];
|
|
cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
|
|
cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
|
cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC1
|
|
cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
|
|
cpm_uart_ports[UART_SCC1].sccup =
|
|
(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
|
|
cpm_uart_ports[UART_SCC1].port.mapbase =
|
|
(unsigned long)&cpmp->cp_scc[0];
|
|
cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
|
|
~(UART_SCCM_TX | UART_SCCM_RX);
|
|
cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC2
|
|
cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
|
|
cpm_uart_ports[UART_SCC2].sccup =
|
|
(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
|
|
cpm_uart_ports[UART_SCC2].port.mapbase =
|
|
(unsigned long)&cpmp->cp_scc[1];
|
|
cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
|
|
~(UART_SCCM_TX | UART_SCCM_RX);
|
|
cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC3
|
|
cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
|
|
cpm_uart_ports[UART_SCC3].sccup =
|
|
(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
|
|
cpm_uart_ports[UART_SCC3].port.mapbase =
|
|
(unsigned long)&cpmp->cp_scc[2];
|
|
cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
|
|
~(UART_SCCM_TX | UART_SCCM_RX);
|
|
cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SCC4
|
|
cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
|
|
cpm_uart_ports[UART_SCC4].sccup =
|
|
(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
|
|
cpm_uart_ports[UART_SCC4].port.mapbase =
|
|
(unsigned long)&cpmp->cp_scc[3];
|
|
cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
|
|
~(UART_SCCM_TX | UART_SCCM_RX);
|
|
cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
|
|
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
|
|
#endif
|
|
return 0;
|
|
}
|