Archived
14
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/amba/bus.c
Linus Walleij 65500fa94a ARM: 6467/1: amba: optional PrimeCell core voltage switch
On some contemporary sub-micron SoCs, peripherals on the chip have
power domain switches, i.e. the voltage to the core may be turned
off to conserve power. In the Ux500 we have this for out PrimeCell
derivates.

This patch makes it possible to specify an (optional) regulator to
handle the voltage domain switch on AMBA PrimeCells, modeled very
similar to how block clocks are handled.

Additional amba_vcore_[enable|disable] calls are supplied to make
it possible introduce optional powering off of the core voltage.
Using this will require code to spool/unspool any core HW state.

Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Cc: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26 10:59:12 +00:00

489 lines
11 KiB
C

/*
* linux/arch/arm/common/amba.c
*
* Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/amba/bus.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#define to_amba_device(d) container_of(d, struct amba_device, dev)
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
static struct amba_id *
amba_lookup(struct amba_id *table, struct amba_device *dev)
{
int ret = 0;
while (table->mask) {
ret = (dev->periphid & table->mask) == table->id;
if (ret)
break;
table++;
}
return ret ? table : NULL;
}
static int amba_match(struct device *dev, struct device_driver *drv)
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *pcdrv = to_amba_driver(drv);
return amba_lookup(pcdrv->id_table, pcdev) != NULL;
}
#ifdef CONFIG_HOTPLUG
static int amba_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct amba_device *pcdev = to_amba_device(dev);
int retval = 0;
retval = add_uevent_var(env, "AMBA_ID=%08x", pcdev->periphid);
return retval;
}
#else
#define amba_uevent NULL
#endif
static int amba_suspend(struct device *dev, pm_message_t state)
{
struct amba_driver *drv = to_amba_driver(dev->driver);
int ret = 0;
if (dev->driver && drv->suspend)
ret = drv->suspend(to_amba_device(dev), state);
return ret;
}
static int amba_resume(struct device *dev)
{
struct amba_driver *drv = to_amba_driver(dev->driver);
int ret = 0;
if (dev->driver && drv->resume)
ret = drv->resume(to_amba_device(dev));
return ret;
}
#define amba_attr_func(name,fmt,arg...) \
static ssize_t name##_show(struct device *_dev, \
struct device_attribute *attr, char *buf) \
{ \
struct amba_device *dev = to_amba_device(_dev); \
return sprintf(buf, fmt, arg); \
}
#define amba_attr(name,fmt,arg...) \
amba_attr_func(name,fmt,arg) \
static DEVICE_ATTR(name, S_IRUGO, name##_show, NULL)
amba_attr_func(id, "%08x\n", dev->periphid);
amba_attr(irq0, "%u\n", dev->irq[0]);
amba_attr(irq1, "%u\n", dev->irq[1]);
amba_attr_func(resource, "\t%016llx\t%016llx\t%016lx\n",
(unsigned long long)dev->res.start, (unsigned long long)dev->res.end,
dev->res.flags);
static struct device_attribute amba_dev_attrs[] = {
__ATTR_RO(id),
__ATTR_RO(resource),
__ATTR_NULL,
};
/*
* Primecells are part of the Advanced Microcontroller Bus Architecture,
* so we call the bus "amba".
*/
static struct bus_type amba_bustype = {
.name = "amba",
.dev_attrs = amba_dev_attrs,
.match = amba_match,
.uevent = amba_uevent,
.suspend = amba_suspend,
.resume = amba_resume,
};
static int __init amba_init(void)
{
return bus_register(&amba_bustype);
}
postcore_initcall(amba_init);
static int amba_get_enable_pclk(struct amba_device *pcdev)
{
struct clk *pclk = clk_get(&pcdev->dev, "apb_pclk");
int ret;
pcdev->pclk = pclk;
if (IS_ERR(pclk))
return PTR_ERR(pclk);
ret = clk_enable(pclk);
if (ret)
clk_put(pclk);
return ret;
}
static void amba_put_disable_pclk(struct amba_device *pcdev)
{
struct clk *pclk = pcdev->pclk;
clk_disable(pclk);
clk_put(pclk);
}
static int amba_get_enable_vcore(struct amba_device *pcdev)
{
struct regulator *vcore = regulator_get(&pcdev->dev, "vcore");
int ret;
pcdev->vcore = vcore;
if (IS_ERR(vcore)) {
/* It is OK not to supply a vcore regulator */
if (PTR_ERR(vcore) == -ENODEV)
return 0;
return PTR_ERR(vcore);
}
ret = regulator_enable(vcore);
if (ret) {
regulator_put(vcore);
pcdev->vcore = ERR_PTR(-ENODEV);
}
return ret;
}
static void amba_put_disable_vcore(struct amba_device *pcdev)
{
struct regulator *vcore = pcdev->vcore;
if (!IS_ERR(vcore)) {
regulator_disable(vcore);
regulator_put(vcore);
}
}
/*
* These are the device model conversion veneers; they convert the
* device model structures to our more specific structures.
*/
static int amba_probe(struct device *dev)
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *pcdrv = to_amba_driver(dev->driver);
struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
int ret;
do {
ret = amba_get_enable_vcore(pcdev);
if (ret)
break;
ret = amba_get_enable_pclk(pcdev);
if (ret)
break;
ret = pcdrv->probe(pcdev, id);
if (ret == 0)
break;
amba_put_disable_pclk(pcdev);
amba_put_disable_vcore(pcdev);
} while (0);
return ret;
}
static int amba_remove(struct device *dev)
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *drv = to_amba_driver(dev->driver);
int ret = drv->remove(pcdev);
amba_put_disable_pclk(pcdev);
amba_put_disable_vcore(pcdev);
return ret;
}
static void amba_shutdown(struct device *dev)
{
struct amba_driver *drv = to_amba_driver(dev->driver);
drv->shutdown(to_amba_device(dev));
}
/**
* amba_driver_register - register an AMBA device driver
* @drv: amba device driver structure
*
* Register an AMBA device driver with the Linux device model
* core. If devices pre-exist, the drivers probe function will
* be called.
*/
int amba_driver_register(struct amba_driver *drv)
{
drv->drv.bus = &amba_bustype;
#define SETFN(fn) if (drv->fn) drv->drv.fn = amba_##fn
SETFN(probe);
SETFN(remove);
SETFN(shutdown);
return driver_register(&drv->drv);
}
/**
* amba_driver_unregister - remove an AMBA device driver
* @drv: AMBA device driver structure to remove
*
* Unregister an AMBA device driver from the Linux device
* model. The device model will call the drivers remove function
* for each device the device driver is currently handling.
*/
void amba_driver_unregister(struct amba_driver *drv)
{
driver_unregister(&drv->drv);
}
static void amba_device_release(struct device *dev)
{
struct amba_device *d = to_amba_device(dev);
if (d->res.parent)
release_resource(&d->res);
kfree(d);
}
/**
* amba_device_register - register an AMBA device
* @dev: AMBA device to register
* @parent: parent memory resource
*
* Setup the AMBA device, reading the cell ID if present.
* Claim the resource, and register the AMBA device with
* the Linux device manager.
*/
int amba_device_register(struct amba_device *dev, struct resource *parent)
{
u32 size;
void __iomem *tmp;
int i, ret;
device_initialize(&dev->dev);
/*
* Copy from device_add
*/
if (dev->dev.init_name) {
dev_set_name(&dev->dev, "%s", dev->dev.init_name);
dev->dev.init_name = NULL;
}
dev->dev.release = amba_device_release;
dev->dev.bus = &amba_bustype;
dev->dev.dma_mask = &dev->dma_mask;
dev->res.name = dev_name(&dev->dev);
if (!dev->dev.coherent_dma_mask && dev->dma_mask)
dev_warn(&dev->dev, "coherent dma mask is unset\n");
ret = request_resource(parent, &dev->res);
if (ret)
goto err_out;
/*
* Dynamically calculate the size of the resource
* and use this for iomap
*/
size = resource_size(&dev->res);
tmp = ioremap(dev->res.start, size);
if (!tmp) {
ret = -ENOMEM;
goto err_release;
}
ret = amba_get_enable_pclk(dev);
if (ret == 0) {
u32 pid, cid;
/*
* Read pid and cid based on size of resource
* they are located at end of region
*/
for (pid = 0, i = 0; i < 4; i++)
pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
(i * 8);
for (cid = 0, i = 0; i < 4; i++)
cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
(i * 8);
amba_put_disable_pclk(dev);
if (cid == AMBA_CID)
dev->periphid = pid;
if (!dev->periphid)
ret = -ENODEV;
}
iounmap(tmp);
if (ret)
goto err_release;
ret = device_add(&dev->dev);
if (ret)
goto err_release;
if (dev->irq[0] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq0);
if (ret == 0 && dev->irq[1] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq1);
if (ret == 0)
return ret;
device_unregister(&dev->dev);
err_release:
release_resource(&dev->res);
err_out:
return ret;
}
/**
* amba_device_unregister - unregister an AMBA device
* @dev: AMBA device to remove
*
* Remove the specified AMBA device from the Linux device
* manager. All files associated with this object will be
* destroyed, and device drivers notified that the device has
* been removed. The AMBA device's resources including
* the amba_device structure will be freed once all
* references to it have been dropped.
*/
void amba_device_unregister(struct amba_device *dev)
{
device_unregister(&dev->dev);
}
struct find_data {
struct amba_device *dev;
struct device *parent;
const char *busid;
unsigned int id;
unsigned int mask;
};
static int amba_find_match(struct device *dev, void *data)
{
struct find_data *d = data;
struct amba_device *pcdev = to_amba_device(dev);
int r;
r = (pcdev->periphid & d->mask) == d->id;
if (d->parent)
r &= d->parent == dev->parent;
if (d->busid)
r &= strcmp(dev_name(dev), d->busid) == 0;
if (r) {
get_device(dev);
d->dev = pcdev;
}
return r;
}
/**
* amba_find_device - locate an AMBA device given a bus id
* @busid: bus id for device (or NULL)
* @parent: parent device (or NULL)
* @id: peripheral ID (or 0)
* @mask: peripheral ID mask (or 0)
*
* Return the AMBA device corresponding to the supplied parameters.
* If no device matches, returns NULL.
*
* NOTE: When a valid device is found, its refcount is
* incremented, and must be decremented before the returned
* reference.
*/
struct amba_device *
amba_find_device(const char *busid, struct device *parent, unsigned int id,
unsigned int mask)
{
struct find_data data;
data.dev = NULL;
data.parent = parent;
data.busid = busid;
data.id = id;
data.mask = mask;
bus_for_each_dev(&amba_bustype, NULL, &data, amba_find_match);
return data.dev;
}
/**
* amba_request_regions - request all mem regions associated with device
* @dev: amba_device structure for device
* @name: name, or NULL to use driver name
*/
int amba_request_regions(struct amba_device *dev, const char *name)
{
int ret = 0;
u32 size;
if (!name)
name = dev->dev.driver->name;
size = resource_size(&dev->res);
if (!request_mem_region(dev->res.start, size, name))
ret = -EBUSY;
return ret;
}
/**
* amba_release_regions - release mem regions assoicated with device
* @dev: amba_device structure for device
*
* Release regions claimed by a successful call to amba_request_regions.
*/
void amba_release_regions(struct amba_device *dev)
{
u32 size;
size = resource_size(&dev->res);
release_mem_region(dev->res.start, size);
}
EXPORT_SYMBOL(amba_driver_register);
EXPORT_SYMBOL(amba_driver_unregister);
EXPORT_SYMBOL(amba_device_register);
EXPORT_SYMBOL(amba_device_unregister);
EXPORT_SYMBOL(amba_find_device);
EXPORT_SYMBOL(amba_request_regions);
EXPORT_SYMBOL(amba_release_regions);