dect/linux-2.6
Archived
14
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/include/asm-arm/arch-pxa/pxa-regs.h
Eric Miao 7053acbd78 [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX 
This patch removes the unnecessary bit number from CKENnn_XXXX
definitions for PXA, so that

	CKEN0_PWM0 --> CKEN_PWM0
	CKEN1_PWM1 --> CKEN_PWM1
	...
	CKEN24_CAMERA --> CKEN_CAMERA

The reasons for the change of these defitions are:

1. they do not scale - they are currently valid for pxa2xx, but
definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera
instead of bit 24

2. they are unnecessary - the peripheral name within the definition
has already announced its usage, we don't need those bit numbers
to know which peripheral we are going to enable/disable clock for

3. they are inconvenient - think about this: a driver programmer
for pxa has to remember which bit in the CKEN register to turn
on/off

Another change in the patch is to make the definitions equal to its
clock bit index, so that

   #define CKEN_CAMERA  (24)

instead of

   #define CKEN_CAMERA  (1 << 24)

this change, however, will add a run-time bit shift operation in
pxa_set_cken(), but the benefit of this change is that it scales
when bit index exceeds 32, e.g., pxa3xx has two registers CKENA
and CKENB, totally 64 bit for this, suppose CAMERA clock enabling
bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10)
and so that pxa_set_cken() need minimum change to adapt to that.

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 23:14:01 +01:00

2366 lines
122 KiB
C
Raw Blame History

/*
* linux/include/asm-arm/arch-pxa/pxa-regs.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __PXA_REGS_H
#define __PXA_REGS_H
/*
* PXA Chip selects
*/
#define PXA_CS0_PHYS 0x00000000
#define PXA_CS1_PHYS 0x04000000
#define PXA_CS2_PHYS 0x08000000
#define PXA_CS3_PHYS 0x0C000000
#define PXA_CS4_PHYS 0x10000000
#define PXA_CS5_PHYS 0x14000000
/*
* Personal Computer Memory Card International Association (PCMCIA) sockets
*/
#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
(0x20000000 + (Nb)*PCMCIASp)
#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
/*
* DMA Controller
*/
#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */
#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */
#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */
#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */
#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */
#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */
#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */
#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */
#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */
#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */
#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
#define DCSR(x) __REG2(0x40000000, (x) << 2)
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
#ifdef CONFIG_PXA27x
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#endif
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
#define DRCMR(n) __REG2(0x40000100, (n)<<2)
#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */
#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */
#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */
#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */
#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */
#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */
#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */
#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */
#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */
#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */
#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */
#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */
#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */
#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */
#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */
#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
#define DRCMR23 __REG(0x4000015c) /* Reserved */
#define DRCMR24 __REG(0x40000160) /* Reserved */
#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
#define DRCMR29 __REG(0x40000174) /* Reserved */
#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
#define DRCMR34 __REG(0x40000188) /* Reserved */
#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
#define DRCMR39 __REG(0x4000019C) /* Reserved */
#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */
#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */
#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */
#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */
#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */
#define DRCMRRXSADR DRCMR2
#define DRCMRTXSADR DRCMR3
#define DRCMRRXBTRBR DRCMR4
#define DRCMRTXBTTHR DRCMR5
#define DRCMRRXFFRBR DRCMR6
#define DRCMRTXFFTHR DRCMR7
#define DRCMRRXMCDR DRCMR8
#define DRCMRRXMODR DRCMR9
#define DRCMRTXMODR DRCMR10
#define DRCMRRXPCDR DRCMR11
#define DRCMRTXPCDR DRCMR12
#define DRCMRRXSSDR DRCMR13
#define DRCMRTXSSDR DRCMR14
#define DRCMRRXSS2DR DRCMR15
#define DRCMRTXSS2DR DRCMR16
#define DRCMRRXICDR DRCMR17
#define DRCMRTXICDR DRCMR18
#define DRCMRRXSTRBR DRCMR19
#define DRCMRTXSTTHR DRCMR20
#define DRCMRRXMMC DRCMR21
#define DRCMRTXMMC DRCMR22
#define DRCMRRXSS3DR DRCMR66
#define DRCMRTXSS3DR DRCMR67
#define DRCMRUDC(x) DRCMR((x) + 24)
#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */
#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */
#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */
#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */
#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */
#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */
#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */
#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */
#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */
#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */
#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */
#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */
#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */
#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */
#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */
#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */
#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */
#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */
#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */
#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */
#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */
#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */
#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */
#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */
#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */
#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */
#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */
#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */
#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */
#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */
#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */
#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */
#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */
#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */
#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */
#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */
#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */
#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */
#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */
#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */
#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */
#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */
#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */
#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */
#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */
#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */
#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */
#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */
#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */
#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */
#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */
#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */
#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */
#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */
#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */
#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */
#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */
#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */
#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */
#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */
#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */
#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */
#define DDADR(x) __REG2(0x40000200, (x) << 4)
#define DSADR(x) __REG2(0x40000204, (x) << 4)
#define DTADR(x) __REG2(0x40000208, (x) << 4)
#define DCMD(x) __REG2(0x4000020c, (x) << 4)
#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
#define DDADR_STOP (1 << 0) /* Stop (read / write) */
#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
/*
* UARTs
*/
/* Full Function UART (FFUART) */
#define FFUART FFRBR
#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Bluetooth UART (BTUART) */
#define BTUART BTRBR
#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Standard UART (STUART) */
#define STUART STRBR
#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
#define STMSR __REG(0x40700018) /* Reserved */
#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Hardware UART (HWUART) */
#define HWUART HWRBR
#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
#define IER_DMAE (1 << 7) /* DMA Requests Enable */
#define IER_UUE (1 << 6) /* UART Unit Enable */
#define IER_NRZE (1 << 5) /* NRZ coding Enable */
#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
#define IIR_TOD (1 << 3) /* Time Out Detected */
#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
#define FCR_ITL_1 (0)
#define FCR_ITL_8 (FCR_ITL1)
#define FCR_ITL_16 (FCR_ITL2)
#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
#define LCR_SB (1 << 6) /* Set Break */
#define LCR_STKYP (1 << 5) /* Sticky Parity */
#define LCR_EPS (1 << 4) /* Even Parity Select */
#define LCR_PEN (1 << 3) /* Parity Enable */
#define LCR_STB (1 << 2) /* Stop Bit */
#define LCR_WLS1 (1 << 1) /* Word Length Select */
#define LCR_WLS0 (1 << 0) /* Word Length Select */
#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
#define LSR_TEMT (1 << 6) /* Transmitter Empty */
#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
#define LSR_BI (1 << 4) /* Break Interrupt */
#define LSR_FE (1 << 3) /* Framing Error */
#define LSR_PE (1 << 2) /* Parity Error */
#define LSR_OE (1 << 1) /* Overrun Error */
#define LSR_DR (1 << 0) /* Data Ready */
#define MCR_LOOP (1 << 4)
#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
#define MCR_RTS (1 << 1) /* Request to Send */
#define MCR_DTR (1 << 0) /* Data Terminal Ready */
#define MSR_DCD (1 << 7) /* Data Carrier Detect */
#define MSR_RI (1 << 6) /* Ring Indicator */
#define MSR_DSR (1 << 5) /* Data Set Ready */
#define MSR_CTS (1 << 4) /* Clear To Send */
#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
/*
* IrSR (Infrared Selection Register)
*/
#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
/*
* I2C registers
*/
#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */
#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */
#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */
#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */
#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */
#define ICR_START (1 << 0) /* start bit */
#define ICR_STOP (1 << 1) /* stop bit */
#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
#define ICR_TB (1 << 3) /* transfer byte bit */
#define ICR_MA (1 << 4) /* master abort */
#define ICR_SCLE (1 << 5) /* master clock enable */
#define ICR_IUE (1 << 6) /* unit enable */
#define ICR_GCD (1 << 7) /* general call disable */
#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
#define ICR_BEIE (1 << 10) /* enable bus error ints */
#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
#define ICR_SADIE (1 << 13) /* slave address detected int enable */
#define ICR_UR (1 << 14) /* unit reset */
#define ISR_RWM (1 << 0) /* read/write mode */
#define ISR_ACKNAK (1 << 1) /* ack/nak status */
#define ISR_UB (1 << 2) /* unit busy */
#define ISR_IBB (1 << 3) /* bus busy */
#define ISR_SSD (1 << 4) /* slave stop detected */
#define ISR_ALD (1 << 5) /* arbitration loss detected */
#define ISR_ITE (1 << 6) /* tx buffer empty */
#define ISR_IRF (1 << 7) /* rx buffer full */
#define ISR_GCAD (1 << 8) /* general call address detected */
#define ISR_SAD (1 << 9) /* slave address detected */
#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
/*
* Serial Audio Controller
*/
#define SACR0 __REG(0x40400000) /* Global Control Register */
#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
#define SACR0_ENB (1 << 0) /* Enable I2S Link */
#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
#define SACR1_DREC (1 << 3) /* Disable Recording Function */
#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
#define SASR0_I2SOFF (1 << 7) /* Controller Status */
#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
#define SASR0_BSY (1 << 2) /* I2S Busy */
#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
/*
* AC97 Controller registers
*/
#define POCR __REG(0x40500000) /* PCM Out Control Register */
#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define PICR __REG(0x40500004) /* PCM In Control Register */
#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define MCCR __REG(0x40500008) /* Mic In Control Register */
#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define GCR __REG(0x4050000C) /* Global Control Register */
#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
#define POSR __REG(0x40500010) /* PCM Out Status Register */
#define POSR_FIFOE (1 << 4) /* FIFO error */
#define POSR_FSR (1 << 2) /* FIFO Service Request */
#define PISR __REG(0x40500014) /* PCM In Status Register */
#define PISR_FIFOE (1 << 4) /* FIFO error */
#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
#define PISR_FSR (1 << 2) /* FIFO Service Request */
#define MCSR __REG(0x40500018) /* Mic In Status Register */
#define MCSR_FIFOE (1 << 4) /* FIFO error */
#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
#define MCSR_FSR (1 << 2) /* FIFO Service Request */
#define GSR __REG(0x4050001C) /* Global Status Register */
#define GSR_CDONE (1 << 19) /* Command Done */
#define GSR_SDONE (1 << 18) /* Status Done */
#define GSR_RDCS (1 << 15) /* Read Completion Status */
#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
#define GSR_PCR (1 << 8) /* Primary Codec Ready */
#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
#define CAR __REG(0x40500020) /* CODEC Access Register */
#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
#define MOCR __REG(0x40500100) /* Modem Out Control Register */
#define MOCR_FEIE (1 << 3) /* FIFO Error */
#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define MICR __REG(0x40500108) /* Modem In Control Register */
#define MICR_FEIE (1 << 3) /* FIFO Error */
#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define MOSR __REG(0x40500110) /* Modem Out Status Register */
#define MOSR_FIFOE (1 << 4) /* FIFO error */
#define MOSR_FSR (1 << 2) /* FIFO Service Request */
#define MISR __REG(0x40500118) /* Modem In Status Register */
#define MISR_FIFOE (1 << 4) /* FIFO error */
#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
#define MISR_FSR (1 << 2) /* FIFO Service Request */
#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
/*
* USB Device Controller
* PXA25x and PXA27x USB device controller registers are different.
*/
#if defined(CONFIG_PXA25x)
#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
#define UDCCR __REG(0x40600000) /* UDC Control Register */
#define UDCCR_UDE (1 << 0) /* UDC enable */
#define UDCCR_UDA (1 << 1) /* UDC active */
#define UDCCR_RSM (1 << 2) /* Device resume */
#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
#define UDCCS0_IPR (1 << 1) /* IN packet ready */
#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
#define UDCCS0_SST (1 << 4) /* Sent stall */
#define UDCCS0_FST (1 << 5) /* Force stall */
#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
#define UDCCS0_SA (1 << 7) /* Setup active */
/* Bulk IN - Endpoint 1,6,11 */
#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_BI_SST (1 << 4) /* Sent stall */
#define UDCCS_BI_FST (1 << 5) /* Force stall */
#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
/* Bulk OUT - Endpoint 2,7,12 */
#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_BO_DME (1 << 3) /* DMA enable */
#define UDCCS_BO_SST (1 << 4) /* Sent stall */
#define UDCCS_BO_FST (1 << 5) /* Force stall */
#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
/* Isochronous IN - Endpoint 3,8,13 */
#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
/* Isochronous OUT - Endpoint 4,9,14 */
#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
#define UDCCS_IO_DME (1 << 3) /* DMA enable */
#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
/* Interrupt IN - Endpoint 5,10,15 */
#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_INT_SST (1 << 4) /* Sent stall */
#define UDCCS_INT_FST (1 << 5) /* Force stall */
#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
#define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */
#define USIR0_IR1 (1 << 1) /* Interrup request ep 1 */
#define USIR0_IR2 (1 << 2) /* Interrup request ep 2 */
#define USIR0_IR3 (1 << 3) /* Interrup request ep 3 */
#define USIR0_IR4 (1 << 4) /* Interrup request ep 4 */
#define USIR0_IR5 (1 << 5) /* Interrup request ep 5 */
#define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */
#define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */
#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
#define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */
#define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */
#define USIR1_IR10 (1 << 2) /* Interrup request ep 10 */
#define USIR1_IR11 (1 << 3) /* Interrup request ep 11 */
#define USIR1_IR12 (1 << 4) /* Interrup request ep 12 */
#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
#elif defined(CONFIG_PXA27x)
#define UDCCR __REG(0x40600000) /* UDC Control Register */
#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
Protocol Port Support */
#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
Support */
#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
Enable */
#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
#define UDCCR_ACN_S 11
#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
#define UDCCR_AIN_S 8
#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
Setting Number */
#define UDCCR_AAISN_S 5
#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
Configuration */
#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
Error */
#define UDCCR_UDR (1 << 2) /* UDC Resume */
#define UDCCR_UDA (1 << 1) /* UDC Active */
#define UDCCR_UDE (1 << 0) /* UDC Enable */
#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
#define UDC_INT_FIFOERROR (0x2)
#define UDC_INT_PACKETCMP (0x1)
#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
Interrupt Enable */
#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
Interrupt Enable */
#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
Interrupt Enable */
#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
Interrupt Enable */
#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
Interrupt Enable */
#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
Interrupt Enable */
#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
Edge Interrupt Enable */
#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
Edge Interrupt Enable */
#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
Interrupt Enable */
#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
Interrupt Enable */
#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
#define UDCCSR0_SA (1 << 7) /* Setup Active */
#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
#define UDCCSR0_FST (1 << 5) /* Force Stall */
#define UDCCSR0_SST (1 << 4) /* Sent Stall */
#define UDCCSR0_DME (1 << 3) /* DMA Enable */
#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
#define UDCCSR_FST (1 << 5) /* Force STALL */
#define UDCCSR_SST (1 << 4) /* Sent STALL */
#define UDCCSR_DME (1 << 3) /* DMA Enable */
#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
#define UDCCSR_PC (1 << 1) /* Packet Complete */
#define UDCCSR_FS (1 << 0) /* FIFO needs service */
#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
#define UDCDN(x) __REG2(0x40600300, (x)<<2)
#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
#define UDCCN(x) __REG2(0x40600400, (x)<<2)
#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
#define UDCCONR_CN_S (25)
#define UDCCONR_IN (0x07 << 22) /* Interface Number */
#define UDCCONR_IN_S (22)
#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
#define UDCCONR_AISN_S (19)
#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
#define UDCCONR_EN_S (15)
#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
#define UDCCONR_ET_S (13)
#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
#define UDCCONR_MPS_S (2)
#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
#define UDC_INT_FIFOERROR (0x2)
#define UDC_INT_PACKETCMP (0x1)
#define UDC_FNR_MASK (0x7ff)
#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
#define UDC_BCR_MASK (0x3ff)
#endif
/*
* Fast Infrared Communication Port
*/
#define FICP __REG(0x40800000) /* Start of FICP area */
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
#define ICDR __REG(0x4080000c) /* ICP Data Register */
#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
#define ICCR0_AME (1 << 7) /* Adress match enable */
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
#define ICCR0_RXE (1 << 4) /* Receive enable */
#define ICCR0_TXE (1 << 3) /* Transmit enable */
#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
#define ICCR0_LBM (1 << 1) /* Loopback mode */
#define ICCR0_ITR (1 << 0) /* IrDA transmission */
#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
#ifdef CONFIG_PXA27x
#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
#endif
#define ICSR0_FRE (1 << 5) /* Framing error */
#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
#define ICSR0_RAB (1 << 2) /* Receiver abort */
#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
#define ICSR1_CRE (1 << 5) /* CRC error */
#define ICSR1_EOF (1 << 4) /* End of frame */
#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
/*
* Real Time Clock
*/
#define RCNR __REG(0x40900000) /* RTC Count Register */
#define RTAR __REG(0x40900004) /* RTC Alarm Register */
#define RTSR __REG(0x40900008) /* RTC Status Register */
#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
#define RTSR_AL (1 << 0) /* RTC alarm detected */
/*
* OS Timer & Match Registers
*/
#define OSMR0 __REG(0x40A00000) /* */
#define OSMR1 __REG(0x40A00004) /* */
#define OSMR2 __REG(0x40A00008) /* */
#define OSMR3 __REG(0x40A0000C) /* */
#define OSMR4 __REG(0x40A00080) /* */
#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
#define OMCR4 __REG(0x40A000C0) /* */
#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
#define OSSR_M2 (1 << 2) /* Match status channel 2 */
#define OSSR_M1 (1 << 1) /* Match status channel 1 */
#define OSSR_M0 (1 << 0) /* Match status channel 0 */
#define OWER_WME (1 << 0) /* Watchdog Match Enable */
#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
/*
* Pulse Width Modulator
*/
#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
/*
* Interrupt Controller
*/
#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
/*
* General Purpose I/O
*/
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
/* More handy macros. The argument is a literal GPIO number. */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
#ifdef CONFIG_PXA27x
/* Interrupt Controller */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
#else
#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
#endif
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
#define GPIO6_MMCCLK 6 /* MMC Clock */
#define GPIO7_48MHz 7 /* 48 MHz clock output */
#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */
#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */
#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */
#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */
#define GPIO12_32KHz 12 /* 32 kHz out */
#define GPIO13_MBGNT 13 /* memory controller grant */
#define GPIO14_MBREQ 14 /* alternate bus master request */
#define GPIO15_nCS_1 15 /* chip select 1 */
#define GPIO16_PWM0 16 /* PWM0 output */
#define GPIO17_PWM1 17 /* PWM1 output */
#define GPIO18_RDY 18 /* Ext. Bus Ready */
#define GPIO19_DREQ1 19 /* External DMA Request */
#define GPIO20_DREQ0 20 /* External DMA Request */
#define GPIO23_SCLK 23 /* SSP clock */
#define GPIO24_SFRM 24 /* SSP Frame */
#define GPIO25_STXD 25 /* SSP transmit */
#define GPIO26_SRXD 26 /* SSP receive */
#define GPIO27_SEXTCLK 27 /* SSP ext_clk */
#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */
#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */
#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */
#define GPIO31_SYNC 31 /* AC97/I2S sync */
#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */
#define GPIO32_SYSCLK 32 /* I2S System Clock */
#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */
#define GPIO33_nCS_5 33 /* chip select 5 */
#define GPIO34_FFRXD 34 /* FFUART receive */
#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */
#define GPIO35_FFCTS 35 /* FFUART Clear to send */
#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */
#define GPIO37_FFDSR 37 /* FFUART data set ready */
#define GPIO38_FFRI 38 /* FFUART Ring Indicator */
#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */
#define GPIO39_FFTXD 39 /* FFUART transmit data */
#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */
#define GPIO41_FFRTS 41 /* FFUART request to send */
#define GPIO42_BTRXD 42 /* BTUART receive data */
#define GPIO42_HWRXD 42 /* HWUART receive data */
#define GPIO43_BTTXD 43 /* BTUART transmit data */
#define GPIO43_HWTXD 43 /* HWUART transmit data */
#define GPIO44_BTCTS 44 /* BTUART clear to send */
#define GPIO44_HWCTS 44 /* HWUART clear to send */
#define GPIO45_BTRTS 45 /* BTUART request to send */
#define GPIO45_HWRTS 45 /* HWUART request to send */
#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */
#define GPIO46_ICPRXD 46 /* ICP receive data */
#define GPIO46_STRXD 46 /* STD_UART receive data */
#define GPIO47_ICPTXD 47 /* ICP transmit data */
#define GPIO47_STTXD 47 /* STD_UART transmit data */
#define GPIO48_nPOE 48 /* Output Enable for Card Space */
#define GPIO49_nPWE 49 /* Write Enable for Card Space */
#define GPIO50_nPIOR 50 /* I/O Read for Card Space */
#define GPIO51_nPIOW 51 /* I/O Write for Card Space */
#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */
#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */
#define GPIO53_MMCCLK 53 /* MMC Clock */
#define GPIO54_MMCCLK 54 /* MMC Clock */
#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */
#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */
#define GPIO55_nPREG 55 /* Card Address bit 26 */
#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */
#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */
#define GPIO58_LDD_0 58 /* LCD data pin 0 */
#define GPIO59_LDD_1 59 /* LCD data pin 1 */
#define GPIO60_LDD_2 60 /* LCD data pin 2 */
#define GPIO61_LDD_3 61 /* LCD data pin 3 */
#define GPIO62_LDD_4 62 /* LCD data pin 4 */
#define GPIO63_LDD_5 63 /* LCD data pin 5 */
#define GPIO64_LDD_6 64 /* LCD data pin 6 */
#define GPIO65_LDD_7 65 /* LCD data pin 7 */
#define GPIO66_LDD_8 66 /* LCD data pin 8 */
#define GPIO66_MBREQ 66 /* alternate bus master req */
#define GPIO67_LDD_9 67 /* LCD data pin 9 */
#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */
#define GPIO68_LDD_10 68 /* LCD data pin 10 */
#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */
#define GPIO69_LDD_11 69 /* LCD data pin 11 */
#define GPIO69_MMCCLK 69 /* MMC_CLK */
#define GPIO70_LDD_12 70 /* LCD data pin 12 */
#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */
#define GPIO71_LDD_13 71 /* LCD data pin 13 */
#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */
#define GPIO72_LDD_14 72 /* LCD data pin 14 */
#define GPIO72_32kHz 72 /* 32 kHz clock */
#define GPIO73_LDD_15 73 /* LCD data pin 15 */
#define GPIO73_MBGNT 73 /* Memory controller grant */
#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */
#define GPIO75_LCD_LCLK 75 /* LCD line clock */
#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */
#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */
#define GPIO78_nCS_2 78 /* chip select 2 */
#define GPIO79_nCS_3 79 /* chip select 3 */
#define GPIO80_nCS_4 80 /* chip select 4 */
#define GPIO81_NSCLK 81 /* NSSP clock */
#define GPIO82_NSFRM 82 /* NSSP Frame */
#define GPIO83_NSTXD 83 /* NSSP transmit */
#define GPIO84_NSRXD 84 /* NSSP receive */
#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */
#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */
#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */
#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */
#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */
#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */
#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */
#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */
#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */
#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */
#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */
/* GPIO alternate function mode & direction */
#define GPIO_IN 0x000
#define GPIO_OUT 0x080
#define GPIO_ALT_FN_1_IN 0x100
#define GPIO_ALT_FN_1_OUT 0x180
#define GPIO_ALT_FN_2_IN 0x200
#define GPIO_ALT_FN_2_OUT 0x280
#define GPIO_ALT_FN_3_IN 0x300
#define GPIO_ALT_FN_3_OUT 0x380
#define GPIO_MD_MASK_NR 0x07f
#define GPIO_MD_MASK_DIR 0x080
#define GPIO_MD_MASK_FN 0x300
#define GPIO_DFLT_LOW 0x400
#define GPIO_DFLT_HIGH 0x800
#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN)
#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT)
#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT)
#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT)
#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT)
#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT)
#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT)
#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT)
#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN)
#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT)
#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT)
#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT)
#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN)
#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN)
#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN)
#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT)
#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT)
#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT)
#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN)
#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN)
#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT)
#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN)
#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT)
#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT)
#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN)
#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT)
#define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT)
#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT)
#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN)
#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT)
#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN)
#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN)
#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN)
#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN)
#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT)
#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT)
#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT)
#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT)
#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN)
#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN)
#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT)
#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT)
#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN)
#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN)
#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT)
#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT)
#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT)
#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT)
#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN)
#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT)
#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT)
#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN)
#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT)
#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT)
#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT)
#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT)
#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT)
#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT)
#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT)
#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT)
#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT)
#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN)
#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN)
#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT)
#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT)
#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT)
#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT)
#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT)
#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT)
#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT)
#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT)
#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT)
#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN)
#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT)
#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT)
#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT)
#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT)
#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT)
#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT)
#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT)
#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT)
#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT)
#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT)
#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT)
#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT)
#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT)
#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT)
#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT)
#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT)
#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT)
#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT)
#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT)
#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT)
#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT)
#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT)
#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT)
#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN)
#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT)
#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN)
#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT)
#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN)
#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT)
#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN)
#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT)
#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT)
#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT)
#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT)
#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT)
#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT)
#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT)
#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN)
#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN)
/*
* Power Manager
*/
#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */
#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */
#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */
#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
#define PCMD(x) __REG2(0x40F00080, (x)<<2)
#define PCMD0 __REG(0x40F00080 + 0 * 4)
#define PCMD1 __REG(0x40F00080 + 1 * 4)
#define PCMD2 __REG(0x40F00080 + 2 * 4)
#define PCMD3 __REG(0x40F00080 + 3 * 4)
#define PCMD4 __REG(0x40F00080 + 4 * 4)
#define PCMD5 __REG(0x40F00080 + 5 * 4)
#define PCMD6 __REG(0x40F00080 + 6 * 4)
#define PCMD7 __REG(0x40F00080 + 7 * 4)
#define PCMD8 __REG(0x40F00080 + 8 * 4)
#define PCMD9 __REG(0x40F00080 + 9 * 4)
#define PCMD10 __REG(0x40F00080 + 10 * 4)
#define PCMD11 __REG(0x40F00080 + 11 * 4)
#define PCMD12 __REG(0x40F00080 + 12 * 4)
#define PCMD13 __REG(0x40F00080 + 13 * 4)
#define PCMD14 __REG(0x40F00080 + 14 * 4)
#define PCMD15 __REG(0x40F00080 + 15 * 4)
#define PCMD16 __REG(0x40F00080 + 16 * 4)
#define PCMD17 __REG(0x40F00080 + 17 * 4)
#define PCMD18 __REG(0x40F00080 + 18 * 4)
#define PCMD19 __REG(0x40F00080 + 19 * 4)
#define PCMD20 __REG(0x40F00080 + 20 * 4)
#define PCMD21 __REG(0x40F00080 + 21 * 4)
#define PCMD22 __REG(0x40F00080 + 22 * 4)
#define PCMD23 __REG(0x40F00080 + 23 * 4)
#define PCMD24 __REG(0x40F00080 + 24 * 4)
#define PCMD25 __REG(0x40F00080 + 25 * 4)
#define PCMD26 __REG(0x40F00080 + 26 * 4)
#define PCMD27 __REG(0x40F00080 + 27 * 4)
#define PCMD28 __REG(0x40F00080 + 28 * 4)
#define PCMD29 __REG(0x40F00080 + 29 * 4)
#define PCMD30 __REG(0x40F00080 + 30 * 4)
#define PCMD31 __REG(0x40F00080 + 31 * 4)
#define PCMD_MBC (1<<12)
#define PCMD_DCE (1<<11)
#define PCMD_LC (1<<10)
/* FIXME: PCMD_SQC need be checked. */
#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
bit 9 should be 0 all day. */
#define PVCR_VCSA (0x1<<14)
#define PVCR_CommandDelay (0xf80)
#define PCFR_PI2C_EN (0x1 << 6)
#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
#define PSSR_RDH (1 << 5) /* Read Disable Hold */
#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
#define PSSR_STS (1 << 3) /* Standby Mode Status */
#define PSSR_VFS (1 << 2) /* VDD Fault Status */
#define PSSR_BFS (1 << 1) /* Battery Fault Status */
#define PSSR_SSS (1 << 0) /* Software Sleep Status */
#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
#define PCFR_RO (1 << 15) /* RDH Override */
#define PCFR_PO (1 << 14) /* PH Override */
#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
#define RCSR_GPR (1 << 3) /* GPIO Reset */
#define RCSR_SMR (1 << 2) /* Sleep Mode */
#define RCSR_WDR (1 << 1) /* Watchdog Reset */
#define RCSR_HWR (1 << 0) /* Hardware Reset */
#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
/*
* SSP Serial Port Registers
* PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
* PXA255, PXA26x and PXA27x have extra ports, registers and bits.
*/
/* Common PXA2xx bits first */
#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
#define SSCR0_National (0x2 << 4) /* National Microwire */
#define SSCR0_ECS (1 << 6) /* External clock select */
#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
#if defined(CONFIG_PXA25x)
#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
#elif defined(CONFIG_PXA27x)
#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
#define SSCR0_EDSS (1 << 20) /* Extended data size select */
#define SSCR0_NCS (1 << 21) /* Network clock select */
#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
#define SSCR0_ADC (1 << 30) /* Audio clock select */
#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
#endif
#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
#define SSSR_BSY (1 << 4) /* SSP Busy */
#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */
#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */
#define SSCR0_NCS (1 << 21) /* Network Clock Select */
#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */
/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */
#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
#define SSSR_BCE (1 << 23) /* Bit Count Error */
#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
#define SSSR_EOC (1 << 20) /* End Of Chain */
#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
#define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */
#define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */
#define SSSR_P1 __REG(0x41000008) /* SSP Port 1 Status Register */
#define SSITR_P1 __REG(0x4100000C) /* SSP Port 1 Interrupt Test Register */
#define SSDR_P1 __REG(0x41000010) /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */
/* Support existing PXA25x drivers */
#define SSCR0 SSCR0_P1 /* SSP Control Register 0 */
#define SSCR1 SSCR1_P1 /* SSP Control Register 1 */
#define SSSR SSSR_P1 /* SSP Status Register */
#define SSITR SSITR_P1 /* SSP Interrupt Test Register */
#define SSDR SSDR_P1 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
/* PXA27x ports */
#if defined (CONFIG_PXA27x)
#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */
#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */
#define SSTSA_P1 __REG(0x41000030) /* SSP Port 1 Tx Timeslot Active */
#define SSRSA_P1 __REG(0x41000034) /* SSP Port 1 Rx Timeslot Active */
#define SSTSS_P1 __REG(0x41000038) /* SSP Port 1 Timeslot Status */
#define SSACD_P1 __REG(0x4100003C) /* SSP Port 1 Audio Clock Divider */
#define SSCR0_P2 __REG(0x41700000) /* SSP Port 2 Control Register 0 */
#define SSCR1_P2 __REG(0x41700004) /* SSP Port 2 Control Register 1 */
#define SSSR_P2 __REG(0x41700008) /* SSP Port 2 Status Register */
#define SSITR_P2 __REG(0x4170000C) /* SSP Port 2 Interrupt Test Register */
#define SSDR_P2 __REG(0x41700010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
#define SSTO_P2 __REG(0x41700028) /* SSP Port 2 Time Out Register */
#define SSPSP_P2 __REG(0x4170002C) /* SSP Port 2 Programmable Serial Protocol */
#define SSTSA_P2 __REG(0x41700030) /* SSP Port 2 Tx Timeslot Active */
#define SSRSA_P2 __REG(0x41700034) /* SSP Port 2 Rx Timeslot Active */
#define SSTSS_P2 __REG(0x41700038) /* SSP Port 2 Timeslot Status */
#define SSACD_P2 __REG(0x4170003C) /* SSP Port 2 Audio Clock Divider */
#define SSCR0_P3 __REG(0x41900000) /* SSP Port 3 Control Register 0 */
#define SSCR1_P3 __REG(0x41900004) /* SSP Port 3 Control Register 1 */
#define SSSR_P3 __REG(0x41900008) /* SSP Port 3 Status Register */
#define SSITR_P3 __REG(0x4190000C) /* SSP Port 3 Interrupt Test Register */
#define SSDR_P3 __REG(0x41900010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
#define SSTO_P3 __REG(0x41900028) /* SSP Port 3 Time Out Register */
#define SSPSP_P3 __REG(0x4190002C) /* SSP Port 3 Programmable Serial Protocol */
#define SSTSA_P3 __REG(0x41900030) /* SSP Port 3 Tx Timeslot Active */
#define SSRSA_P3 __REG(0x41900034) /* SSP Port 3 Rx Timeslot Active */
#define SSTSS_P3 __REG(0x41900038) /* SSP Port 3 Timeslot Status */
#define SSACD_P3 __REG(0x4190003C) /* SSP Port 3 Audio Clock Divider */
#else /* PXA255 (only port 2) and PXA26x ports*/
#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */
#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */
#define SSCR0_P2 __REG(0x41400000) /* SSP Port 2 Control Register 0 */
#define SSCR1_P2 __REG(0x41400004) /* SSP Port 2 Control Register 1 */
#define SSSR_P2 __REG(0x41400008) /* SSP Port 2 Status Register */
#define SSITR_P2 __REG(0x4140000C) /* SSP Port 2 Interrupt Test Register */
#define SSDR_P2 __REG(0x41400010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
#define SSTO_P2 __REG(0x41400028) /* SSP Port 2 Time Out Register */
#define SSPSP_P2 __REG(0x4140002C) /* SSP Port 2 Programmable Serial Protocol */
#define SSCR0_P3 __REG(0x41500000) /* SSP Port 3 Control Register 0 */
#define SSCR1_P3 __REG(0x41500004) /* SSP Port 3 Control Register 1 */
#define SSSR_P3 __REG(0x41500008) /* SSP Port 3 Status Register */
#define SSITR_P3 __REG(0x4150000C) /* SSP Port 3 Interrupt Test Register */
#define SSDR_P3 __REG(0x41500010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
#define SSTO_P3 __REG(0x41500028) /* SSP Port 3 Time Out Register */
#define SSPSP_P3 __REG(0x4150002C) /* SSP Port 3 Programmable Serial Protocol */
#endif
#define SSCR0_P(x) (*(((x) == 1) ? &SSCR0_P1 : ((x) == 2) ? &SSCR0_P2 : ((x) == 3) ? &SSCR0_P3 : NULL))
#define SSCR1_P(x) (*(((x) == 1) ? &SSCR1_P1 : ((x) == 2) ? &SSCR1_P2 : ((x) == 3) ? &SSCR1_P3 : NULL))
#define SSSR_P(x) (*(((x) == 1) ? &SSSR_P1 : ((x) == 2) ? &SSSR_P2 : ((x) == 3) ? &SSSR_P3 : NULL))
#define SSITR_P(x) (*(((x) == 1) ? &SSITR_P1 : ((x) == 2) ? &SSITR_P2 : ((x) == 3) ? &SSITR_P3 : NULL))
#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL))
#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL))
#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL))
#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL))
#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL))
/*
* MultiMediaCard (MMC) controller
*/
#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */
#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */
#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */
#define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */
#define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */
#define MMC_RESTO __REG(0x41100014) /* Expected response time out */
#define MMC_RDTO __REG(0x41100018) /* Expected data read time out */
#define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */
#define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */
#define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */
#define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */
#define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */
#define MMC_CMD __REG(0x41100030) /* Index of current command */
#define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */
#define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */
#define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */
#define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */
#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */
/*
* Core Clock
*/
#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
#define CKEN __REG(0x41300004) /* Clock Enable Register */
#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
#define CKEN_IM (20) /* Internal Memory Clock Enable */
#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
#define CKEN_USIM (18) /* USIM Unit Clock Enable */
#define CKEN_MSL (17) /* MSL Unit Clock Enable */
#define CKEN_LCD (16) /* LCD Unit Clock Enable */
#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
#define CKEN_I2C (14) /* I2C Unit Clock Enable */
#define CKEN_FICP (13) /* FICP Unit Clock Enable */
#define CKEN_MMC (12) /* MMC Unit Clock Enable */
#define CKEN_USB (11) /* USB Unit Clock Enable */
#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
#define CKEN_I2S (8) /* I2S Unit Clock Enable */
#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
#define CKEN_STUART (5) /* STUART Unit Clock Enable */
#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
#define CKEN_SSP (3) /* SSP Unit Clock Enable */
#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
/*
* LCD
*/
#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */
#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */
#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */
#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */
#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
#define LCSR __REG(0x44000038) /* LCD Controller Status Register */
#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */
#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */
#define TMEDCR __REG(0x44000044) /* TMED Control Register */
#define LCCR3_1BPP (0 << 24)
#define LCCR3_2BPP (1 << 24)
#define LCCR3_4BPP (2 << 24)
#define LCCR3_8BPP (3 << 24)
#define LCCR3_16BPP (4 << 24)
#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */
#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */
#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */
#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */
#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */
#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */
#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */
#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display */
/* Select */
#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
#define LCCR0_SFM (1 << 4) /* Start of frame mask */
#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
#define LCCR0_EFM (1 << 6) /* End of Frame mask */
#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */
#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome */
/* display mode) */
#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
/* display */
#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
/* display */
#define LCCR0_DIS (1 << 10) /* LCD Disable */
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
#define LCCR0_PDD_S 12
#define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
#define LCCR0_LCDT (1 << 22) /* LCD panel type */
#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */
#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */
#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */
#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \
(((Pixel) - 1) << FShft (LCCR1_PPL))
#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
/* pulse Width [1..64 Tpix] */ \
(((Tpix) - 1) << FShft (LCCR1_HSW))
#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
/* count - 1 [Tpix] */
#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
/* [1..256 Tpix] */ \
(((Tpix) - 1) << FShft (LCCR1_ELW))
#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
/* Wait count - 1 [Tpix] */
#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
/* [1..256 Tpix] */ \
(((Tpix) - 1) << FShft (LCCR1_BLW))
#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
(((Line) - 1) << FShft (LCCR2_LPP))
#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
/* Width - 1 [Tln] (L_FCLK) */
#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
/* Width [1..64 Tln] */ \
(((Tln) - 1) << FShft (LCCR2_VSW))
#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
/* count [Tln] */
#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
/* [0..255 Tln] */ \
((Tln) << FShft (LCCR2_EFW))
#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
/* Wait count [Tln] */
#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
/* [0..255 Tln] */ \
((Tln) << FShft (LCCR2_BFW))
#if 0
#define LCCR3_PCD (0xff) /* Pixel clock divisor */
#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */
#define LCCR3_ACB_S 8
#endif
#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
#define LCCR3_API_S 16
#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */
#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
#define LCCR3_OEP (1 << 23) /* Output Enable Polarity (L_BIAS, */
/* active display mode) */
#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
#if 0
#define LCCR3_BPP (7 << 24) /* bits per pixel */
#define LCCR3_BPP_S 24
#endif
#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \
(((Div) << FShft (LCCR3_PCD)))
#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \
(((Bpp) << FShft (LCCR3_BPP)))
#define LCCR3_ACB Fld (8, 8) /* AC Bias */
#define LCCR3_Acb(Acb) /* BAC Bias */ \
(((Acb) << FShft (LCCR3_ACB)))
#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
/* pulse active High */
#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
/* active High */
#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
/* active Low */
#define LCSR_LDD (1 << 0) /* LCD Disable Done */
#define LCSR_SOF (1 << 1) /* Start of frame */
#define LCSR_BER (1 << 2) /* Bus error */
#define LCSR_ABC (1 << 3) /* AC Bias count */
#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
#define LCSR_OU (1 << 6) /* output FIFO underrun */
#define LCSR_QD (1 << 7) /* quick disable */
#define LCSR_EOF (1 << 8) /* end of frame */
#define LCSR_BS (1 << 9) /* branch status */
#define LCSR_SINT (1 << 10) /* subsequent interrupt */
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
#define LCSR_LDD (1 << 0) /* LCD Disable Done */
#define LCSR_SOF (1 << 1) /* Start of frame */
#define LCSR_BER (1 << 2) /* Bus error */
#define LCSR_ABC (1 << 3) /* AC Bias count */
#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
#define LCSR_OU (1 << 6) /* output FIFO underrun */
#define LCSR_QD (1 << 7) /* quick disable */
#define LCSR_EOF (1 << 8) /* end of frame */
#define LCSR_BS (1 << 9) /* branch status */
#define LCSR_SINT (1 << 10) /* subsequent interrupt */
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
/*
* Memory controller
*/
#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
/*
* More handy macros for PCMCIA
*
* Arg is socket number
*/
#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
/* MECR register defines */
#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
#ifdef CONFIG_PXA27x
#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
/*
* Keypad
*/
#define KPC __REG(0x41500000) /* Keypad Interface Control register */
#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */
#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */
#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */
#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */
#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */
#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */
#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */
#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */
#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */
#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */
#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */
#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */
#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */
#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */
#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */
#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7)
#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */
#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */
#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */
#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */
#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */
#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */
#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */
#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */
#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */
#define KPDK_DKP (0x1 << 31)
#define KPDK_DK7 (0x1 << 7)
#define KPDK_DK6 (0x1 << 6)
#define KPDK_DK5 (0x1 << 5)
#define KPDK_DK4 (0x1 << 4)
#define KPDK_DK3 (0x1 << 3)
#define KPDK_DK2 (0x1 << 2)
#define KPDK_DK1 (0x1 << 1)
#define KPDK_DK0 (0x1 << 0)
#define KPREC_OF1 (0x1 << 31)
#define kPREC_UF1 (0x1 << 30)
#define KPREC_OF0 (0x1 << 15)
#define KPREC_UF0 (0x1 << 14)
#define KPMK_MKP (0x1 << 31)
#define KPAS_SO (0x1 << 31)
#define KPASMKPx_SO (0x1 << 31)
/*
* UHC: USB Host Controller (OHCI-like) register definitions
*/
#define UHC_BASE_PHYS (0x4C000000)
#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
Interrupt Enable*/
#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
/* Camera Interface */
#define CICR0 __REG(0x50000000)
#define CICR1 __REG(0x50000004)
#define CICR2 __REG(0x50000008)
#define CICR3 __REG(0x5000000C)
#define CICR4 __REG(0x50000010)
#define CISR __REG(0x50000014)
#define CIFR __REG(0x50000018)
#define CITOR __REG(0x5000001C)
#define CIBR0 __REG(0x50000028)
#define CIBR1 __REG(0x50000030)
#define CIBR2 __REG(0x50000038)
#define CICR0_DMAEN (1 << 31) /* DMA request enable */
#define CICR0_PAR_EN (1 << 30) /* Parity enable */
#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
#define CICR0_ENB (1 << 28) /* Camera interface enable */
#define CICR0_DIS (1 << 27) /* Camera interface disable */
#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
#define CICR0_TOM (1 << 9) /* Time-out mask */
#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
#define CICR0_EOLM (1 << 6) /* End-of-line mask */
#define CICR0_PERRM (1 << 5) /* Parity-error mask */
#define CICR0_QDM (1 << 4) /* Quick-disable mask */
#define CICR0_CDM (1 << 3) /* Disable-done mask */
#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
#define CICR1_TBIT (1 << 31) /* Transparency bit */
#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */
#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
#define CICR1_RGB_F (1 << 11) /* RGB format */
#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
#define CICR1_DW (0x7 << 0) /* Data width mask */
#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
wait count mask */
#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
wait count mask */
#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
wait count mask */
#define CICR2_FSW (0x7 << 0) /* Frame stabilization
wait count mask */
#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
wait count mask */
#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
wait count mask */
#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
wait count mask */
#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
#define CISR_FTO (1 << 15) /* FIFO time-out */
#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
#define CISR_EOL (1 << 8) /* End of line */
#define CISR_PAR_ERR (1 << 7) /* Parity error */
#define CISR_CQD (1 << 6) /* Camera interface quick disable */
#define CISR_CDD (1 << 5) /* Camera interface disable done */
#define CISR_SOF (1 << 4) /* Start of frame */
#define CISR_EOF (1 << 3) /* End of frame */
#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
#define SRAM_SIZE 0x40000 /* 4x64K */
#define SRAM_MEM_PHYS 0x5C000000
#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */
#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */
#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */
#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */
#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */
#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */
#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */
#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */
#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */
#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */
#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */
#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */
#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */
#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */
#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */
#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */
#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */
#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */
#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */
#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */
#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */
#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */
#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */
#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */
#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */
#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */
#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */
#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */
#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */
#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */
#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */
#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */
#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */
#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */
#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */
#endif
/* PWRMODE register M field values */
#define PWRMODE_IDLE 0x1
#define PWRMODE_STANDBY 0x2
#define PWRMODE_SLEEP 0x3
#define PWRMODE_DEEPSLEEP 0x7
#endif
View git blame Copy permalink