![Jörn Engel](/assets/img/avatar_default.png)
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
1044 lines
22 KiB
C
1044 lines
22 KiB
C
/*
|
|
* linux/drivers/net/irda/sa1100_ir.c
|
|
*
|
|
* Copyright (C) 2000-2001 Russell King
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Infra-red driver for the StrongARM SA1100 embedded microprocessor
|
|
*
|
|
* Note that we don't have to worry about the SA1111's DMA bugs in here,
|
|
* so we use the straight forward dma_map_* functions with a null pointer.
|
|
*
|
|
* This driver takes one kernel command line parameter, sa1100ir=, with
|
|
* the following options:
|
|
* max_rate:baudrate - set the maximum baud rate
|
|
* power_leve:level - set the transmitter power level
|
|
* tx_lpm:0|1 - set transmit low power mode
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <net/irda/irda.h>
|
|
#include <net/irda/wrapper.h>
|
|
#include <net/irda/irda_device.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/mach/irda.h>
|
|
|
|
static int power_level = 3;
|
|
static int tx_lpm;
|
|
static int max_rate = 4000000;
|
|
|
|
struct sa1100_irda {
|
|
unsigned char hscr0;
|
|
unsigned char utcr4;
|
|
unsigned char power;
|
|
unsigned char open;
|
|
|
|
int speed;
|
|
int newspeed;
|
|
|
|
struct sk_buff *txskb;
|
|
struct sk_buff *rxskb;
|
|
dma_addr_t txbuf_dma;
|
|
dma_addr_t rxbuf_dma;
|
|
dma_regs_t *txdma;
|
|
dma_regs_t *rxdma;
|
|
|
|
struct net_device_stats stats;
|
|
struct device *dev;
|
|
struct irda_platform_data *pdata;
|
|
struct irlap_cb *irlap;
|
|
struct qos_info qos;
|
|
|
|
iobuff_t tx_buff;
|
|
iobuff_t rx_buff;
|
|
};
|
|
|
|
#define IS_FIR(si) ((si)->speed >= 4000000)
|
|
|
|
#define HPSIR_MAX_RXLEN 2047
|
|
|
|
/*
|
|
* Allocate and map the receive buffer, unless it is already allocated.
|
|
*/
|
|
static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
|
|
{
|
|
if (si->rxskb)
|
|
return 0;
|
|
|
|
si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
|
|
|
|
if (!si->rxskb) {
|
|
printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Align any IP headers that may be contained
|
|
* within the frame.
|
|
*/
|
|
skb_reserve(si->rxskb, 1);
|
|
|
|
si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
|
|
HPSIR_MAX_RXLEN,
|
|
DMA_FROM_DEVICE);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We want to get here as soon as possible, and get the receiver setup.
|
|
* We use the existing buffer.
|
|
*/
|
|
static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
|
|
{
|
|
if (!si->rxskb) {
|
|
printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* First empty receive FIFO
|
|
*/
|
|
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
|
|
|
|
/*
|
|
* Enable the DMA, receiver and receive interrupt.
|
|
*/
|
|
sa1100_clear_dma(si->rxdma);
|
|
sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN);
|
|
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE;
|
|
}
|
|
|
|
/*
|
|
* Set the IrDA communications speed.
|
|
*/
|
|
static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
|
|
{
|
|
unsigned long flags;
|
|
int brd, ret = -EINVAL;
|
|
|
|
switch (speed) {
|
|
case 9600: case 19200: case 38400:
|
|
case 57600: case 115200:
|
|
brd = 3686400 / (16 * speed) - 1;
|
|
|
|
/*
|
|
* Stop the receive DMA.
|
|
*/
|
|
if (IS_FIR(si))
|
|
sa1100_stop_dma(si->rxdma);
|
|
|
|
local_irq_save(flags);
|
|
|
|
Ser2UTCR3 = 0;
|
|
Ser2HSCR0 = HSCR0_UART;
|
|
|
|
Ser2UTCR1 = brd >> 8;
|
|
Ser2UTCR2 = brd;
|
|
|
|
/*
|
|
* Clear status register
|
|
*/
|
|
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
|
|
Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
|
|
|
|
if (si->pdata->set_speed)
|
|
si->pdata->set_speed(si->dev, speed);
|
|
|
|
si->speed = speed;
|
|
|
|
local_irq_restore(flags);
|
|
ret = 0;
|
|
break;
|
|
|
|
case 4000000:
|
|
local_irq_save(flags);
|
|
|
|
si->hscr0 = 0;
|
|
|
|
Ser2HSSR0 = 0xff;
|
|
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
|
|
Ser2UTCR3 = 0;
|
|
|
|
si->speed = speed;
|
|
|
|
if (si->pdata->set_speed)
|
|
si->pdata->set_speed(si->dev, speed);
|
|
|
|
sa1100_irda_rx_alloc(si);
|
|
sa1100_irda_rx_dma_start(si);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Control the power state of the IrDA transmitter.
|
|
* State:
|
|
* 0 - off
|
|
* 1 - short range, lowest power
|
|
* 2 - medium range, medium power
|
|
* 3 - maximum range, high power
|
|
*
|
|
* Currently, only assabet is known to support this.
|
|
*/
|
|
static int
|
|
__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
|
|
{
|
|
int ret = 0;
|
|
if (si->pdata->set_power)
|
|
ret = si->pdata->set_power(si->dev, state);
|
|
return ret;
|
|
}
|
|
|
|
static inline int
|
|
sa1100_set_power(struct sa1100_irda *si, unsigned int state)
|
|
{
|
|
int ret;
|
|
|
|
ret = __sa1100_irda_set_power(si, state);
|
|
if (ret == 0)
|
|
si->power = state;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sa1100_irda_startup(struct sa1100_irda *si)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Ensure that the ports for this device are setup correctly.
|
|
*/
|
|
if (si->pdata->startup)
|
|
si->pdata->startup(si->dev);
|
|
|
|
/*
|
|
* Configure PPC for IRDA - we want to drive TXD2 low.
|
|
* We also want to drive this pin low during sleep.
|
|
*/
|
|
PPSR &= ~PPC_TXD2;
|
|
PSDR &= ~PPC_TXD2;
|
|
PPDR |= PPC_TXD2;
|
|
|
|
/*
|
|
* Enable HP-SIR modulation, and ensure that the port is disabled.
|
|
*/
|
|
Ser2UTCR3 = 0;
|
|
Ser2HSCR0 = HSCR0_UART;
|
|
Ser2UTCR4 = si->utcr4;
|
|
Ser2UTCR0 = UTCR0_8BitData;
|
|
Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
|
|
|
|
/*
|
|
* Clear status register
|
|
*/
|
|
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
|
|
|
|
ret = sa1100_irda_set_speed(si, si->speed = 9600);
|
|
if (ret) {
|
|
Ser2UTCR3 = 0;
|
|
Ser2HSCR0 = 0;
|
|
|
|
if (si->pdata->shutdown)
|
|
si->pdata->shutdown(si->dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sa1100_irda_shutdown(struct sa1100_irda *si)
|
|
{
|
|
/*
|
|
* Stop all DMA activity.
|
|
*/
|
|
sa1100_stop_dma(si->rxdma);
|
|
sa1100_stop_dma(si->txdma);
|
|
|
|
/* Disable the port. */
|
|
Ser2UTCR3 = 0;
|
|
Ser2HSCR0 = 0;
|
|
|
|
if (si->pdata->shutdown)
|
|
si->pdata->shutdown(si->dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/*
|
|
* Suspend the IrDA interface.
|
|
*/
|
|
static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct sa1100_irda *si;
|
|
|
|
if (!dev)
|
|
return 0;
|
|
|
|
si = dev->priv;
|
|
if (si->open) {
|
|
/*
|
|
* Stop the transmit queue
|
|
*/
|
|
netif_device_detach(dev);
|
|
disable_irq(dev->irq);
|
|
sa1100_irda_shutdown(si);
|
|
__sa1100_irda_set_power(si, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Resume the IrDA interface.
|
|
*/
|
|
static int sa1100_irda_resume(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct sa1100_irda *si;
|
|
|
|
if (!dev)
|
|
return 0;
|
|
|
|
si = dev->priv;
|
|
if (si->open) {
|
|
/*
|
|
* If we missed a speed change, initialise at the new speed
|
|
* directly. It is debatable whether this is actually
|
|
* required, but in the interests of continuing from where
|
|
* we left off it is desireable. The converse argument is
|
|
* that we should re-negotiate at 9600 baud again.
|
|
*/
|
|
if (si->newspeed) {
|
|
si->speed = si->newspeed;
|
|
si->newspeed = 0;
|
|
}
|
|
|
|
sa1100_irda_startup(si);
|
|
__sa1100_irda_set_power(si, si->power);
|
|
enable_irq(dev->irq);
|
|
|
|
/*
|
|
* This automatically wakes up the queue
|
|
*/
|
|
netif_device_attach(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define sa1100_irda_suspend NULL
|
|
#define sa1100_irda_resume NULL
|
|
#endif
|
|
|
|
/*
|
|
* HP-SIR format interrupt service routines.
|
|
*/
|
|
static void sa1100_irda_hpsir_irq(struct net_device *dev)
|
|
{
|
|
struct sa1100_irda *si = dev->priv;
|
|
int status;
|
|
|
|
status = Ser2UTSR0;
|
|
|
|
/*
|
|
* Deal with any receive errors first. The bytes in error may be
|
|
* the only bytes in the receive FIFO, so we do this first.
|
|
*/
|
|
while (status & UTSR0_EIF) {
|
|
int stat, data;
|
|
|
|
stat = Ser2UTSR1;
|
|
data = Ser2UTDR;
|
|
|
|
if (stat & (UTSR1_FRE | UTSR1_ROR)) {
|
|
si->stats.rx_errors++;
|
|
if (stat & UTSR1_FRE)
|
|
si->stats.rx_frame_errors++;
|
|
if (stat & UTSR1_ROR)
|
|
si->stats.rx_fifo_errors++;
|
|
} else
|
|
async_unwrap_char(dev, &si->stats, &si->rx_buff, data);
|
|
|
|
status = Ser2UTSR0;
|
|
}
|
|
|
|
/*
|
|
* We must clear certain bits.
|
|
*/
|
|
Ser2UTSR0 = status & (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
|
|
|
|
if (status & UTSR0_RFS) {
|
|
/*
|
|
* There are at least 4 bytes in the FIFO. Read 3 bytes
|
|
* and leave the rest to the block below.
|
|
*/
|
|
async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
|
|
async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
|
|
async_unwrap_char(dev, &si->stats, &si->rx_buff, Ser2UTDR);
|
|
}
|
|
|
|
if (status & (UTSR0_RFS | UTSR0_RID)) {
|
|
/*
|
|
* Fifo contains more than 1 character.
|
|
*/
|
|
do {
|
|
async_unwrap_char(dev, &si->stats, &si->rx_buff,
|
|
Ser2UTDR);
|
|
} while (Ser2UTSR1 & UTSR1_RNE);
|
|
|
|
dev->last_rx = jiffies;
|
|
}
|
|
|
|
if (status & UTSR0_TFS && si->tx_buff.len) {
|
|
/*
|
|
* Transmitter FIFO is not full
|
|
*/
|
|
do {
|
|
Ser2UTDR = *si->tx_buff.data++;
|
|
si->tx_buff.len -= 1;
|
|
} while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len);
|
|
|
|
if (si->tx_buff.len == 0) {
|
|
si->stats.tx_packets++;
|
|
si->stats.tx_bytes += si->tx_buff.data -
|
|
si->tx_buff.head;
|
|
|
|
/*
|
|
* We need to ensure that the transmitter has
|
|
* finished.
|
|
*/
|
|
do
|
|
rmb();
|
|
while (Ser2UTSR1 & UTSR1_TBY);
|
|
|
|
/*
|
|
* Ok, we've finished transmitting. Now enable
|
|
* the receiver. Sometimes we get a receive IRQ
|
|
* immediately after a transmit...
|
|
*/
|
|
Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
|
|
Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
|
|
|
|
if (si->newspeed) {
|
|
sa1100_irda_set_speed(si, si->newspeed);
|
|
si->newspeed = 0;
|
|
}
|
|
|
|
/* I'm hungry! */
|
|
netif_wake_queue(dev);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
|
|
{
|
|
struct sk_buff *skb = si->rxskb;
|
|
dma_addr_t dma_addr;
|
|
unsigned int len, stat, data;
|
|
|
|
if (!skb) {
|
|
printk(KERN_ERR "sa1100_ir: SKB is NULL!\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Get the current data position.
|
|
*/
|
|
dma_addr = sa1100_get_dma_pos(si->rxdma);
|
|
len = dma_addr - si->rxbuf_dma;
|
|
if (len > HPSIR_MAX_RXLEN)
|
|
len = HPSIR_MAX_RXLEN;
|
|
dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE);
|
|
|
|
do {
|
|
/*
|
|
* Read Status, and then Data.
|
|
*/
|
|
stat = Ser2HSSR1;
|
|
rmb();
|
|
data = Ser2HSDR;
|
|
|
|
if (stat & (HSSR1_CRE | HSSR1_ROR)) {
|
|
si->stats.rx_errors++;
|
|
if (stat & HSSR1_CRE)
|
|
si->stats.rx_crc_errors++;
|
|
if (stat & HSSR1_ROR)
|
|
si->stats.rx_frame_errors++;
|
|
} else
|
|
skb->data[len++] = data;
|
|
|
|
/*
|
|
* If we hit the end of frame, there's
|
|
* no point in continuing.
|
|
*/
|
|
if (stat & HSSR1_EOF)
|
|
break;
|
|
} while (Ser2HSSR0 & HSSR0_EIF);
|
|
|
|
if (stat & HSSR1_EOF) {
|
|
si->rxskb = NULL;
|
|
|
|
skb_put(skb, len);
|
|
skb->dev = dev;
|
|
skb->mac.raw = skb->data;
|
|
skb->protocol = htons(ETH_P_IRDA);
|
|
si->stats.rx_packets++;
|
|
si->stats.rx_bytes += len;
|
|
|
|
/*
|
|
* Before we pass the buffer up, allocate a new one.
|
|
*/
|
|
sa1100_irda_rx_alloc(si);
|
|
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
} else {
|
|
/*
|
|
* Remap the buffer.
|
|
*/
|
|
si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data,
|
|
HPSIR_MAX_RXLEN,
|
|
DMA_FROM_DEVICE);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* FIR format interrupt service routine. We only have to
|
|
* handle RX events; transmit events go via the TX DMA handler.
|
|
*
|
|
* No matter what, we disable RX, process, and the restart RX.
|
|
*/
|
|
static void sa1100_irda_fir_irq(struct net_device *dev)
|
|
{
|
|
struct sa1100_irda *si = dev->priv;
|
|
|
|
/*
|
|
* Stop RX DMA
|
|
*/
|
|
sa1100_stop_dma(si->rxdma);
|
|
|
|
/*
|
|
* Framing error - we throw away the packet completely.
|
|
* Clearing RXE flushes the error conditions and data
|
|
* from the fifo.
|
|
*/
|
|
if (Ser2HSSR0 & (HSSR0_FRE | HSSR0_RAB)) {
|
|
si->stats.rx_errors++;
|
|
|
|
if (Ser2HSSR0 & HSSR0_FRE)
|
|
si->stats.rx_frame_errors++;
|
|
|
|
/*
|
|
* Clear out the DMA...
|
|
*/
|
|
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP;
|
|
|
|
/*
|
|
* Clear selected status bits now, so we
|
|
* don't miss them next time around.
|
|
*/
|
|
Ser2HSSR0 = HSSR0_FRE | HSSR0_RAB;
|
|
}
|
|
|
|
/*
|
|
* Deal with any receive errors. The any of the lowest
|
|
* 8 bytes in the FIFO may contain an error. We must read
|
|
* them one by one. The "error" could even be the end of
|
|
* packet!
|
|
*/
|
|
if (Ser2HSSR0 & HSSR0_EIF)
|
|
sa1100_irda_fir_error(si, dev);
|
|
|
|
/*
|
|
* No matter what happens, we must restart reception.
|
|
*/
|
|
sa1100_irda_rx_dma_start(si);
|
|
}
|
|
|
|
static irqreturn_t sa1100_irda_irq(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
if (IS_FIR(((struct sa1100_irda *)dev->priv)))
|
|
sa1100_irda_fir_irq(dev);
|
|
else
|
|
sa1100_irda_hpsir_irq(dev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* TX DMA completion handler.
|
|
*/
|
|
static void sa1100_irda_txdma_irq(void *id)
|
|
{
|
|
struct net_device *dev = id;
|
|
struct sa1100_irda *si = dev->priv;
|
|
struct sk_buff *skb = si->txskb;
|
|
|
|
si->txskb = NULL;
|
|
|
|
/*
|
|
* Wait for the transmission to complete. Unfortunately,
|
|
* the hardware doesn't give us an interrupt to indicate
|
|
* "end of frame".
|
|
*/
|
|
do
|
|
rmb();
|
|
while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
|
|
|
|
/*
|
|
* Clear the transmit underrun bit.
|
|
*/
|
|
Ser2HSSR0 = HSSR0_TUR;
|
|
|
|
/*
|
|
* Do we need to change speed? Note that we're lazy
|
|
* here - we don't free the old rxskb. We don't need
|
|
* to allocate a buffer either.
|
|
*/
|
|
if (si->newspeed) {
|
|
sa1100_irda_set_speed(si, si->newspeed);
|
|
si->newspeed = 0;
|
|
}
|
|
|
|
/*
|
|
* Start reception. This disables the transmitter for
|
|
* us. This will be using the existing RX buffer.
|
|
*/
|
|
sa1100_irda_rx_dma_start(si);
|
|
|
|
/*
|
|
* Account and free the packet.
|
|
*/
|
|
if (skb) {
|
|
dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE);
|
|
si->stats.tx_packets ++;
|
|
si->stats.tx_bytes += skb->len;
|
|
dev_kfree_skb_irq(skb);
|
|
}
|
|
|
|
/*
|
|
* Make sure that the TX queue is available for sending
|
|
* (for retries). TX has priority over RX at all times.
|
|
*/
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct sa1100_irda *si = dev->priv;
|
|
int speed = irda_get_next_speed(skb);
|
|
|
|
/*
|
|
* Does this packet contain a request to change the interface
|
|
* speed? If so, remember it until we complete the transmission
|
|
* of this frame.
|
|
*/
|
|
if (speed != si->speed && speed != -1)
|
|
si->newspeed = speed;
|
|
|
|
/*
|
|
* If this is an empty frame, we can bypass a lot.
|
|
*/
|
|
if (skb->len == 0) {
|
|
if (si->newspeed) {
|
|
si->newspeed = 0;
|
|
sa1100_irda_set_speed(si, speed);
|
|
}
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
if (!IS_FIR(si)) {
|
|
netif_stop_queue(dev);
|
|
|
|
si->tx_buff.data = si->tx_buff.head;
|
|
si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data,
|
|
si->tx_buff.truesize);
|
|
|
|
/*
|
|
* Set the transmit interrupt enable. This will fire
|
|
* off an interrupt immediately. Note that we disable
|
|
* the receiver so we won't get spurious characteres
|
|
* received.
|
|
*/
|
|
Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE;
|
|
|
|
dev_kfree_skb(skb);
|
|
} else {
|
|
int mtt = irda_get_mtt(skb);
|
|
|
|
/*
|
|
* We must not be transmitting...
|
|
*/
|
|
BUG_ON(si->txskb);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
si->txskb = skb;
|
|
si->txbuf_dma = dma_map_single(si->dev, skb->data,
|
|
skb->len, DMA_TO_DEVICE);
|
|
|
|
sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len);
|
|
|
|
/*
|
|
* If we have a mean turn-around time, impose the specified
|
|
* specified delay. We could shorten this by timing from
|
|
* the point we received the packet.
|
|
*/
|
|
if (mtt)
|
|
udelay(mtt);
|
|
|
|
Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE;
|
|
}
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
|
|
{
|
|
struct if_irda_req *rq = (struct if_irda_req *)ifreq;
|
|
struct sa1100_irda *si = dev->priv;
|
|
int ret = -EOPNOTSUPP;
|
|
|
|
switch (cmd) {
|
|
case SIOCSBANDWIDTH:
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
/*
|
|
* We are unable to set the speed if the
|
|
* device is not running.
|
|
*/
|
|
if (si->open) {
|
|
ret = sa1100_irda_set_speed(si,
|
|
rq->ifr_baudrate);
|
|
} else {
|
|
printk("sa1100_irda_ioctl: SIOCSBANDWIDTH: !netif_running\n");
|
|
ret = 0;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case SIOCSMEDIABUSY:
|
|
ret = -EPERM;
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
irda_device_set_media_busy(dev, TRUE);
|
|
ret = 0;
|
|
}
|
|
break;
|
|
|
|
case SIOCGRECEIVING:
|
|
rq->ifr_receiving = IS_FIR(si) ? 0
|
|
: si->rx_buff.state != OUTSIDE_FRAME;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct net_device_stats *sa1100_irda_stats(struct net_device *dev)
|
|
{
|
|
struct sa1100_irda *si = dev->priv;
|
|
return &si->stats;
|
|
}
|
|
|
|
static int sa1100_irda_start(struct net_device *dev)
|
|
{
|
|
struct sa1100_irda *si = dev->priv;
|
|
int err;
|
|
|
|
si->speed = 9600;
|
|
|
|
err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
|
|
if (err)
|
|
goto err_irq;
|
|
|
|
err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive",
|
|
NULL, NULL, &si->rxdma);
|
|
if (err)
|
|
goto err_rx_dma;
|
|
|
|
err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit",
|
|
sa1100_irda_txdma_irq, dev, &si->txdma);
|
|
if (err)
|
|
goto err_tx_dma;
|
|
|
|
/*
|
|
* The interrupt must remain disabled for now.
|
|
*/
|
|
disable_irq(dev->irq);
|
|
|
|
/*
|
|
* Setup the serial port for the specified speed.
|
|
*/
|
|
err = sa1100_irda_startup(si);
|
|
if (err)
|
|
goto err_startup;
|
|
|
|
/*
|
|
* Open a new IrLAP layer instance.
|
|
*/
|
|
si->irlap = irlap_open(dev, &si->qos, "sa1100");
|
|
err = -ENOMEM;
|
|
if (!si->irlap)
|
|
goto err_irlap;
|
|
|
|
/*
|
|
* Now enable the interrupt and start the queue
|
|
*/
|
|
si->open = 1;
|
|
sa1100_set_power(si, power_level); /* low power mode */
|
|
enable_irq(dev->irq);
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
|
|
err_irlap:
|
|
si->open = 0;
|
|
sa1100_irda_shutdown(si);
|
|
err_startup:
|
|
sa1100_free_dma(si->txdma);
|
|
err_tx_dma:
|
|
sa1100_free_dma(si->rxdma);
|
|
err_rx_dma:
|
|
free_irq(dev->irq, dev);
|
|
err_irq:
|
|
return err;
|
|
}
|
|
|
|
static int sa1100_irda_stop(struct net_device *dev)
|
|
{
|
|
struct sa1100_irda *si = dev->priv;
|
|
|
|
disable_irq(dev->irq);
|
|
sa1100_irda_shutdown(si);
|
|
|
|
/*
|
|
* If we have been doing DMA receive, make sure we
|
|
* tidy that up cleanly.
|
|
*/
|
|
if (si->rxskb) {
|
|
dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN,
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb(si->rxskb);
|
|
si->rxskb = NULL;
|
|
}
|
|
|
|
/* Stop IrLAP */
|
|
if (si->irlap) {
|
|
irlap_close(si->irlap);
|
|
si->irlap = NULL;
|
|
}
|
|
|
|
netif_stop_queue(dev);
|
|
si->open = 0;
|
|
|
|
/*
|
|
* Free resources
|
|
*/
|
|
sa1100_free_dma(si->txdma);
|
|
sa1100_free_dma(si->rxdma);
|
|
free_irq(dev->irq, dev);
|
|
|
|
sa1100_set_power(si, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_irda_init_iobuf(iobuff_t *io, int size)
|
|
{
|
|
io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
|
|
if (io->head != NULL) {
|
|
io->truesize = size;
|
|
io->in_frame = FALSE;
|
|
io->state = OUTSIDE_FRAME;
|
|
io->data = io->head;
|
|
}
|
|
return io->head ? 0 : -ENOMEM;
|
|
}
|
|
|
|
static int sa1100_irda_probe(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev;
|
|
struct sa1100_irda *si;
|
|
unsigned int baudrate_mask;
|
|
int err;
|
|
|
|
if (!pdev->dev.platform_data)
|
|
return -EINVAL;
|
|
|
|
err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
|
|
if (err)
|
|
goto err_mem_1;
|
|
err = request_mem_region(__PREG(Ser2HSCR0), 0x1c, "IrDA") ? 0 : -EBUSY;
|
|
if (err)
|
|
goto err_mem_2;
|
|
err = request_mem_region(__PREG(Ser2HSCR2), 0x04, "IrDA") ? 0 : -EBUSY;
|
|
if (err)
|
|
goto err_mem_3;
|
|
|
|
dev = alloc_irdadev(sizeof(struct sa1100_irda));
|
|
if (!dev)
|
|
goto err_mem_4;
|
|
|
|
si = dev->priv;
|
|
si->dev = &pdev->dev;
|
|
si->pdata = pdev->dev.platform_data;
|
|
|
|
/*
|
|
* Initialise the HP-SIR buffers
|
|
*/
|
|
err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
|
|
if (err)
|
|
goto err_mem_5;
|
|
err = sa1100_irda_init_iobuf(&si->tx_buff, 4000);
|
|
if (err)
|
|
goto err_mem_5;
|
|
|
|
dev->hard_start_xmit = sa1100_irda_hard_xmit;
|
|
dev->open = sa1100_irda_start;
|
|
dev->stop = sa1100_irda_stop;
|
|
dev->do_ioctl = sa1100_irda_ioctl;
|
|
dev->get_stats = sa1100_irda_stats;
|
|
dev->irq = IRQ_Ser2ICP;
|
|
|
|
irda_init_max_qos_capabilies(&si->qos);
|
|
|
|
/*
|
|
* We support original IRDA up to 115k2. (we don't currently
|
|
* support 4Mbps). Min Turn Time set to 1ms or greater.
|
|
*/
|
|
baudrate_mask = IR_9600;
|
|
|
|
switch (max_rate) {
|
|
case 4000000: baudrate_mask |= IR_4000000 << 8;
|
|
case 115200: baudrate_mask |= IR_115200;
|
|
case 57600: baudrate_mask |= IR_57600;
|
|
case 38400: baudrate_mask |= IR_38400;
|
|
case 19200: baudrate_mask |= IR_19200;
|
|
}
|
|
|
|
si->qos.baud_rate.bits &= baudrate_mask;
|
|
si->qos.min_turn_time.bits = 7;
|
|
|
|
irda_qos_bits_to_value(&si->qos);
|
|
|
|
si->utcr4 = UTCR4_HPSIR;
|
|
if (tx_lpm)
|
|
si->utcr4 |= UTCR4_Z1_6us;
|
|
|
|
/*
|
|
* Initially enable HP-SIR modulation, and ensure that the port
|
|
* is disabled.
|
|
*/
|
|
Ser2UTCR3 = 0;
|
|
Ser2UTCR4 = si->utcr4;
|
|
Ser2HSCR0 = HSCR0_UART;
|
|
|
|
err = register_netdev(dev);
|
|
if (err == 0)
|
|
platform_set_drvdata(pdev, dev);
|
|
|
|
if (err) {
|
|
err_mem_5:
|
|
kfree(si->tx_buff.head);
|
|
kfree(si->rx_buff.head);
|
|
free_netdev(dev);
|
|
err_mem_4:
|
|
release_mem_region(__PREG(Ser2HSCR2), 0x04);
|
|
err_mem_3:
|
|
release_mem_region(__PREG(Ser2HSCR0), 0x1c);
|
|
err_mem_2:
|
|
release_mem_region(__PREG(Ser2UTCR0), 0x24);
|
|
}
|
|
err_mem_1:
|
|
return err;
|
|
}
|
|
|
|
static int sa1100_irda_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
struct sa1100_irda *si = dev->priv;
|
|
unregister_netdev(dev);
|
|
kfree(si->tx_buff.head);
|
|
kfree(si->rx_buff.head);
|
|
free_netdev(dev);
|
|
}
|
|
|
|
release_mem_region(__PREG(Ser2HSCR2), 0x04);
|
|
release_mem_region(__PREG(Ser2HSCR0), 0x1c);
|
|
release_mem_region(__PREG(Ser2UTCR0), 0x24);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sa1100ir_driver = {
|
|
.probe = sa1100_irda_probe,
|
|
.remove = sa1100_irda_remove,
|
|
.suspend = sa1100_irda_suspend,
|
|
.resume = sa1100_irda_resume,
|
|
.driver = {
|
|
.name = "sa11x0-ir",
|
|
},
|
|
};
|
|
|
|
static int __init sa1100_irda_init(void)
|
|
{
|
|
/*
|
|
* Limit power level a sensible range.
|
|
*/
|
|
if (power_level < 1)
|
|
power_level = 1;
|
|
if (power_level > 3)
|
|
power_level = 3;
|
|
|
|
return platform_driver_register(&sa1100ir_driver);
|
|
}
|
|
|
|
static void __exit sa1100_irda_exit(void)
|
|
{
|
|
platform_driver_unregister(&sa1100ir_driver);
|
|
}
|
|
|
|
module_init(sa1100_irda_init);
|
|
module_exit(sa1100_irda_exit);
|
|
module_param(power_level, int, 0);
|
|
module_param(tx_lpm, int, 0);
|
|
module_param(max_rate, int, 0);
|
|
|
|
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
|
|
MODULE_DESCRIPTION("StrongARM SA1100 IrDA driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_PARM_DESC(power_level, "IrDA power level, 1 (low) to 3 (high)");
|
|
MODULE_PARM_DESC(tx_lpm, "Enable transmitter low power (1.6us) mode");
|
|
MODULE_PARM_DESC(max_rate, "Maximum baud rate (4000000, 115200, 57600, 38400, 19200, 9600)");
|