![Jassi Brar](/assets/img/avatar_default.png)
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
224 lines
5.9 KiB
C
224 lines
5.9 KiB
C
/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c
|
|
*
|
|
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/serial_core.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <plat/regs-serial.h>
|
|
#include <plat/regs-srom.h>
|
|
#include <plat/s5pv310.h>
|
|
#include <plat/cpu.h>
|
|
#include <plat/devs.h>
|
|
#include <plat/sdhci.h>
|
|
#include <plat/iic.h>
|
|
#include <plat/pd.h>
|
|
|
|
#include <mach/map.h>
|
|
|
|
/* Following are default values for UCON, ULCON and UFCON UART registers */
|
|
#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
|
|
S3C2410_UCON_RXILEVEL | \
|
|
S3C2410_UCON_TXIRQMODE | \
|
|
S3C2410_UCON_RXIRQMODE | \
|
|
S3C2410_UCON_RXFIFO_TOI | \
|
|
S3C2443_UCON_RXERR_IRQEN)
|
|
|
|
#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
|
|
|
|
#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
|
|
S5PV210_UFCON_TXTRIG4 | \
|
|
S5PV210_UFCON_RXTRIG4)
|
|
|
|
static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
|
|
[0] = {
|
|
.hwport = 0,
|
|
.flags = 0,
|
|
.ucon = SMDKC210_UCON_DEFAULT,
|
|
.ulcon = SMDKC210_ULCON_DEFAULT,
|
|
.ufcon = SMDKC210_UFCON_DEFAULT,
|
|
},
|
|
[1] = {
|
|
.hwport = 1,
|
|
.flags = 0,
|
|
.ucon = SMDKC210_UCON_DEFAULT,
|
|
.ulcon = SMDKC210_ULCON_DEFAULT,
|
|
.ufcon = SMDKC210_UFCON_DEFAULT,
|
|
},
|
|
[2] = {
|
|
.hwport = 2,
|
|
.flags = 0,
|
|
.ucon = SMDKC210_UCON_DEFAULT,
|
|
.ulcon = SMDKC210_ULCON_DEFAULT,
|
|
.ufcon = SMDKC210_UFCON_DEFAULT,
|
|
},
|
|
[3] = {
|
|
.hwport = 3,
|
|
.flags = 0,
|
|
.ucon = SMDKC210_UCON_DEFAULT,
|
|
.ulcon = SMDKC210_ULCON_DEFAULT,
|
|
.ufcon = SMDKC210_UFCON_DEFAULT,
|
|
},
|
|
};
|
|
|
|
static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
|
|
.cd_type = S3C_SDHCI_CD_GPIO,
|
|
.ext_cd_gpio = S5PV310_GPK0(2),
|
|
.ext_cd_gpio_invert = 1,
|
|
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
|
|
#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
|
|
.max_width = 8,
|
|
.host_caps = MMC_CAP_8_BIT_DATA,
|
|
#endif
|
|
};
|
|
|
|
static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
|
|
.cd_type = S3C_SDHCI_CD_GPIO,
|
|
.ext_cd_gpio = S5PV310_GPK0(2),
|
|
.ext_cd_gpio_invert = 1,
|
|
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
|
|
};
|
|
|
|
static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
|
|
.cd_type = S3C_SDHCI_CD_GPIO,
|
|
.ext_cd_gpio = S5PV310_GPK2(2),
|
|
.ext_cd_gpio_invert = 1,
|
|
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
|
|
#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
|
|
.max_width = 8,
|
|
.host_caps = MMC_CAP_8_BIT_DATA,
|
|
#endif
|
|
};
|
|
|
|
static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
|
|
.cd_type = S3C_SDHCI_CD_GPIO,
|
|
.ext_cd_gpio = S5PV310_GPK2(2),
|
|
.ext_cd_gpio_invert = 1,
|
|
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
|
|
};
|
|
|
|
static struct resource smdkc210_smsc911x_resources[] = {
|
|
[0] = {
|
|
.start = S5PV310_PA_SROM_BANK(1),
|
|
.end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_EINT(5),
|
|
.end = IRQ_EINT(5),
|
|
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
|
|
},
|
|
};
|
|
|
|
static struct smsc911x_platform_config smsc9215_config = {
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
.mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
|
|
};
|
|
|
|
static struct platform_device smdkc210_smsc911x = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
|
|
.resource = smdkc210_smsc911x_resources,
|
|
.dev = {
|
|
.platform_data = &smsc9215_config,
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info i2c_devs1[] __initdata = {
|
|
{I2C_BOARD_INFO("wm8994", 0x1a),},
|
|
};
|
|
|
|
static struct platform_device *smdkc210_devices[] __initdata = {
|
|
&s3c_device_hsmmc0,
|
|
&s3c_device_hsmmc1,
|
|
&s3c_device_hsmmc2,
|
|
&s3c_device_hsmmc3,
|
|
&s3c_device_i2c1,
|
|
&s3c_device_rtc,
|
|
&s3c_device_wdt,
|
|
&s5pv310_device_ac97,
|
|
&s5pv310_device_i2s0,
|
|
&s5pv310_device_pd[PD_MFC],
|
|
&s5pv310_device_pd[PD_G3D],
|
|
&s5pv310_device_pd[PD_LCD0],
|
|
&s5pv310_device_pd[PD_LCD1],
|
|
&s5pv310_device_pd[PD_CAM],
|
|
&s5pv310_device_pd[PD_TV],
|
|
&s5pv310_device_pd[PD_GPS],
|
|
&s5pv310_device_sysmmu,
|
|
&samsung_asoc_dma,
|
|
&smdkc210_smsc911x,
|
|
};
|
|
|
|
static void __init smdkc210_smsc911x_init(void)
|
|
{
|
|
u32 cs1;
|
|
|
|
/* configure nCS1 width to 16 bits */
|
|
cs1 = __raw_readl(S5P_SROM_BW) &
|
|
~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
|
|
cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
|
|
(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
|
|
(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
|
|
S5P_SROM_BW__NCS1__SHIFT;
|
|
__raw_writel(cs1, S5P_SROM_BW);
|
|
|
|
/* set timing for nCS1 suitable for ethernet chip */
|
|
__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
|
|
(0x9 << S5P_SROM_BCX__TACP__SHIFT) |
|
|
(0xc << S5P_SROM_BCX__TCAH__SHIFT) |
|
|
(0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
|
|
(0x6 << S5P_SROM_BCX__TACC__SHIFT) |
|
|
(0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
|
|
(0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
|
|
}
|
|
|
|
static void __init smdkc210_map_io(void)
|
|
{
|
|
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
|
|
s3c24xx_init_clocks(24000000);
|
|
s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
|
|
}
|
|
|
|
static void __init smdkc210_machine_init(void)
|
|
{
|
|
s3c_i2c1_set_platdata(NULL);
|
|
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
|
|
|
|
smdkc210_smsc911x_init();
|
|
|
|
s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
|
|
s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
|
|
s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
|
|
s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
|
|
|
|
platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
|
|
}
|
|
|
|
MACHINE_START(SMDKC210, "SMDKC210")
|
|
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
|
|
.boot_params = S5P_PA_SDRAM + 0x100,
|
|
.init_irq = s5pv310_init_irq,
|
|
.map_io = smdkc210_map_io,
|
|
.init_machine = smdkc210_machine_init,
|
|
.timer = &s5pv310_timer,
|
|
MACHINE_END
|