Archived
14
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/usb
Alan Stern 6feff1b92b EHCI: don't try to clear the IAAD bit
This patch (as1541) corrects a small mistake in ehci-hcd.  The IAAD
(Interrupt on Async Advance Doorbell) bit in the USBCMD register is
designed, as its name says, to act as a "doorbell".  That is, the
driver activates the bit by setting it to 1, and the hardware
deactivates it later by setting it back to 0.  The driver cannot clear
the bit by writing a 0 to it; such writes are simply ignored.

Therefore there is no reason for ehci-hcd to try to clear the bit.
The patch removes the two instances where such attempts occur.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 13:55:40 -07:00
..
atm usb/atm/ueagle-atm: Don't test for NULL ptr before calling release_firmware() 2012-04-18 13:52:35 -07:00
c67x00 usb: convert drivers/usb/* to use module_platform_driver() 2011-11-28 06:48:32 +09:00
class USB merge for 3.4-rc1 2012-03-20 11:26:30 -07:00
core simple_open: automatically convert to simple_open() 2012-04-05 15:25:50 -07:00
dwc3 USB merge for 3.4-rc1 2012-03-20 11:26:30 -07:00
early
gadget fsl/usb: Add controller version based ULPI and UTMI phy support 2012-04-18 13:46:42 -07:00
host EHCI: don't try to clear the IAAD bit 2012-04-18 13:55:40 -07:00
image USB: convert drivers/usb/* to use module_usb_driver() 2011-11-18 09:34:02 -08:00
misc USB: usbsevseg: fix max length 2012-01-24 12:08:36 -08:00
mon
musb Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma 2012-03-29 15:34:57 -07:00
otg usb: otg: ab8500-usb: make probe() work again 2012-03-02 16:22:11 -08:00
renesas_usbhs Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma 2012-03-29 15:34:57 -07:00
serial USB: io_ti: fix abuse of interface data 2012-04-10 13:32:54 -07:00
storage usb/storage/ene_ub6250: Remove redundant NULL check before release_firmware() and pointless assignment 2012-04-18 13:52:35 -07:00
wusbcore uwb & wusb: fix kconfig error 2012-01-26 11:22:42 -08:00
Kconfig ARM: More device tree support updates 2012-03-28 12:34:33 -07:00
Makefile USB: OTG should be linked before Host 2011-11-26 19:58:47 -08:00
README
usb-common.c
usb-skeleton.c Revert "USB: usb-skeleton.c: fix open/disconnect race" 2012-01-24 12:02:38 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.