505 lines
16 KiB
Text
505 lines
16 KiB
Text
#
|
|
# Wireless LAN device configuration
|
|
#
|
|
|
|
menu "Wireless LAN"
|
|
depends on !S390
|
|
|
|
config WLAN_PRE80211
|
|
bool "Wireless LAN (pre-802.11)"
|
|
depends on NETDEVICES
|
|
---help---
|
|
Say Y if you have any pre-802.11 wireless LAN hardware.
|
|
|
|
This option does not affect the kernel build, it only
|
|
lets you choose drivers.
|
|
|
|
config STRIP
|
|
tristate "STRIP (Metricom starmode radio IP)"
|
|
depends on INET && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
Say Y if you have a Metricom radio and intend to use Starmode Radio
|
|
IP. STRIP is a radio protocol developed for the MosquitoNet project
|
|
(on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
|
|
traffic using Metricom radios. Metricom radios are small, battery
|
|
powered, 100kbit/sec packet radio transceivers, about the size and
|
|
weight of a cellular telephone. (You may also have heard them called
|
|
"Metricom modems" but we avoid the term "modem" because it misleads
|
|
many people into thinking that you can plug a Metricom modem into a
|
|
phone line and use it as a modem.)
|
|
|
|
You can use STRIP on any Linux machine with a serial port, although
|
|
it is obviously most useful for people with laptop computers. If you
|
|
think you might get a Metricom radio in the future, there is no harm
|
|
in saying Y to STRIP now, except that it makes the kernel a bit
|
|
bigger.
|
|
|
|
To compile this as a module, choose M here: the module will be
|
|
called strip.
|
|
|
|
config ARLAN
|
|
tristate "Aironet Arlan 655 & IC2200 DS support"
|
|
depends on ISA && !64BIT && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
Aironet makes Arlan, a class of wireless LAN adapters. These use the
|
|
www.Telxon.com chip, which is also used on several similar cards.
|
|
This driver is tested on the 655 and IC2200 series cards. Look at
|
|
<http://www.ylenurme.ee/~elmer/655/> for the latest information.
|
|
|
|
The driver is built as two modules, arlan and arlan-proc. The latter
|
|
is the /proc interface and is not needed most of time.
|
|
|
|
On some computers the card ends up in non-valid state after some
|
|
time. Use a ping-reset script to clear it.
|
|
|
|
config WAVELAN
|
|
tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
|
|
depends on ISA && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
|
|
a Radio LAN (wireless Ethernet-like Local Area Network) using the
|
|
radio frequencies 900 MHz and 2.4 GHz.
|
|
|
|
If you want to use an ISA WaveLAN card under Linux, say Y and read
|
|
the Ethernet-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>. Some more specific
|
|
information is contained in
|
|
<file:Documentation/networking/wavelan.txt> and in the source code
|
|
<file:drivers/net/wireless/wavelan.p.h>.
|
|
|
|
You will also need the wireless tools package available from
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
Please read the man pages contained therein.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called wavelan.
|
|
|
|
config PCMCIA_WAVELAN
|
|
tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
|
|
depends on PCMCIA && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
help
|
|
Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
|
|
(PC-card) wireless Ethernet networking card to your computer. This
|
|
driver is for the non-IEEE-802.11 Wavelan cards.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called wavelan_cs. If unsure, say N.
|
|
|
|
config PCMCIA_NETWAVE
|
|
tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
|
|
depends on PCMCIA && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
help
|
|
Say Y here if you intend to attach this type of PCMCIA (PC-card)
|
|
wireless Ethernet networking card to your computer.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called netwave_cs. If unsure, say N.
|
|
|
|
|
|
config WLAN_80211
|
|
bool "Wireless LAN (IEEE 802.11)"
|
|
depends on NETDEVICES
|
|
---help---
|
|
Say Y if you have any 802.11 wireless LAN hardware.
|
|
|
|
This option does not affect the kernel build, it only
|
|
lets you choose drivers.
|
|
|
|
config PCMCIA_RAYCS
|
|
tristate "Aviator/Raytheon 2.4GHz wireless support"
|
|
depends on PCMCIA && WLAN_80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
|
|
(PC-card) wireless Ethernet networking card to your computer.
|
|
Please read the file <file:Documentation/networking/ray_cs.txt> for
|
|
details.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called ray_cs. If unsure, say N.
|
|
|
|
config LIBERTAS
|
|
tristate "Marvell 8xxx Libertas WLAN driver support"
|
|
depends on WLAN_80211
|
|
select WIRELESS_EXT
|
|
select LIB80211
|
|
select FW_LOADER
|
|
---help---
|
|
A library for Marvell Libertas 8xxx devices.
|
|
|
|
config LIBERTAS_USB
|
|
tristate "Marvell Libertas 8388 USB 802.11b/g cards"
|
|
depends on LIBERTAS && USB
|
|
---help---
|
|
A driver for Marvell Libertas 8388 USB devices.
|
|
|
|
config LIBERTAS_CS
|
|
tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
|
|
depends on LIBERTAS && PCMCIA
|
|
select FW_LOADER
|
|
---help---
|
|
A driver for Marvell Libertas 8385 CompactFlash devices.
|
|
|
|
config LIBERTAS_SDIO
|
|
tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
|
|
depends on LIBERTAS && MMC
|
|
---help---
|
|
A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
|
|
|
|
config LIBERTAS_SPI
|
|
tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
|
|
depends on LIBERTAS && SPI && GENERIC_GPIO
|
|
---help---
|
|
A driver for Marvell Libertas 8686 SPI devices.
|
|
|
|
config LIBERTAS_DEBUG
|
|
bool "Enable full debugging output in the Libertas module."
|
|
depends on LIBERTAS
|
|
---help---
|
|
Debugging support.
|
|
|
|
config LIBERTAS_THINFIRM
|
|
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
|
|
depends on WLAN_80211 && MAC80211
|
|
select FW_LOADER
|
|
---help---
|
|
A library for Marvell Libertas 8xxx devices using thinfirm.
|
|
|
|
config LIBERTAS_THINFIRM_USB
|
|
tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
|
|
depends on LIBERTAS_THINFIRM && USB
|
|
---help---
|
|
A driver for Marvell Libertas 8388 USB devices using thinfirm.
|
|
|
|
config AIRO
|
|
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
|
|
depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
|
|
select WIRELESS_EXT
|
|
select CRYPTO
|
|
---help---
|
|
This is the standard Linux driver to support Cisco/Aironet ISA and
|
|
PCI 802.11 wireless cards.
|
|
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
|
|
- with or without encryption) as well as card before the Cisco
|
|
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
|
|
|
|
This driver support both the standard Linux Wireless Extensions
|
|
and Cisco proprietary API, so both the Linux Wireless Tools and the
|
|
Cisco Linux utilities can be used to configure the card.
|
|
|
|
The driver can be compiled as a module and will be named "airo".
|
|
|
|
config ATMEL
|
|
tristate "Atmel at76c50x chipset 802.11b support"
|
|
depends on (PCI || PCMCIA) && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
select CRC32
|
|
---help---
|
|
A driver 802.11b wireless cards based on the Atmel fast-vnet
|
|
chips. This driver supports standard Linux wireless extensions.
|
|
|
|
Many cards based on this chipset do not have flash memory
|
|
and need their firmware loaded at start-up. If yours is
|
|
one of these, you will need to provide a firmware image
|
|
to be loaded into the card by the driver. The Atmel
|
|
firmware package can be downloaded from
|
|
<http://www.thekelleys.org.uk/atmel>
|
|
|
|
config PCI_ATMEL
|
|
tristate "Atmel at76c506 PCI cards"
|
|
depends on ATMEL && PCI
|
|
---help---
|
|
Enable support for PCI and mini-PCI cards containing the
|
|
Atmel at76c506 chip.
|
|
|
|
config PCMCIA_ATMEL
|
|
tristate "Atmel at76c502/at76c504 PCMCIA cards"
|
|
depends on ATMEL && PCMCIA
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
select CRC32
|
|
---help---
|
|
Enable support for PCMCIA cards containing the
|
|
Atmel at76c502 and at76c504 chips.
|
|
|
|
config AT76C50X_USB
|
|
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
|
|
depends on MAC80211 && WLAN_80211 && USB
|
|
select FW_LOADER
|
|
---help---
|
|
Enable support for USB Wireless devices using Atmel at76c503,
|
|
at76c505 or at76c505a chips.
|
|
|
|
config AIRO_CS
|
|
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
|
|
depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select CRYPTO
|
|
select CRYPTO_AES
|
|
---help---
|
|
This is the standard Linux driver to support Cisco/Aironet PCMCIA
|
|
802.11 wireless cards. This driver is the same as the Aironet
|
|
driver part of the Linux Pcmcia package.
|
|
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
|
|
- with or without encryption) as well as card before the Cisco
|
|
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
|
|
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
|
|
802.11b cards.
|
|
|
|
This driver support both the standard Linux Wireless Extensions
|
|
and Cisco proprietary API, so both the Linux Wireless Tools and the
|
|
Cisco Linux utilities can be used to configure the card.
|
|
|
|
config PCMCIA_WL3501
|
|
tristate "Planet WL3501 PCMCIA cards"
|
|
depends on EXPERIMENTAL && PCMCIA && WLAN_80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
|
|
It has basic support for Linux wireless extensions and initial
|
|
micro support for ethtool.
|
|
|
|
config PRISM54
|
|
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
|
|
depends on PCI && EXPERIMENTAL && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
---help---
|
|
Enable PCI and Cardbus support for the following chipset based cards:
|
|
|
|
ISL3880 - Prism GT 802.11 b/g
|
|
ISL3877 - Prism Indigo 802.11 a
|
|
ISL3890 - Prism Duette 802.11 a/b/g
|
|
|
|
For a complete list of supported cards visit <http://prism54.org>.
|
|
Here is the latest confirmed list of supported cards:
|
|
|
|
3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
|
|
Allnet ALL0271 PCI Card
|
|
Compex WL54G Cardbus Card
|
|
Corega CG-WLCB54GT Cardbus Card
|
|
D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
|
|
I-O Data WN-G54/CB Cardbus Card
|
|
Kobishi XG-300 aka Z-Com Cardbus Card
|
|
Netgear WG511 Cardbus Card
|
|
Ovislink WL-5400PCI PCI Card
|
|
Peabird WLG-PCI PCI Card
|
|
Sitecom WL-100i Cardbus Card
|
|
Sitecom WL-110i PCI Card
|
|
SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
|
|
SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
|
|
SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
|
|
Z-Com XG-900 PCI Card
|
|
Zyxel G-100 Cardbus Card
|
|
|
|
If you enable this you will need a firmware file as well.
|
|
You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
|
|
You can get this non-GPL'd firmware file from the Prism54 project page:
|
|
<http://prism54.org>
|
|
You will also need the /etc/hotplug/firmware.agent script from
|
|
a current hotplug package.
|
|
|
|
Note: You need a motherboard with DMA support to use any of these cards
|
|
|
|
If you want to compile the driver as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want),
|
|
say M here and read <file:Documentation/kbuild/modules.txt>.
|
|
The module will be called prism54.ko.
|
|
|
|
config USB_ZD1201
|
|
tristate "USB ZD1201 based Wireless device support"
|
|
depends on USB && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
---help---
|
|
Say Y if you want to use wireless LAN adapters based on the ZyDAS
|
|
ZD1201 chip.
|
|
|
|
This driver makes the adapter appear as a normal Ethernet interface,
|
|
typically on wlan0.
|
|
|
|
The zd1201 device requires external firmware to be loaded.
|
|
This can be found at http://linux-lc100020.sourceforge.net/
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zd1201.
|
|
|
|
config USB_NET_RNDIS_WLAN
|
|
tristate "Wireless RNDIS USB support"
|
|
depends on USB && WLAN_80211 && EXPERIMENTAL
|
|
select USB_USBNET
|
|
select USB_NET_CDCETHER
|
|
select USB_NET_RNDIS_HOST
|
|
select WIRELESS_EXT
|
|
select CFG80211
|
|
---help---
|
|
This is a driver for wireless RNDIS devices.
|
|
These are USB based adapters found in devices such as:
|
|
|
|
Buffalo WLI-U2-KG125S
|
|
U.S. Robotics USR5421
|
|
Belkin F5D7051
|
|
Linksys WUSB54GSv2
|
|
Linksys WUSB54GSC
|
|
Asus WL169gE
|
|
Eminent EM4045
|
|
BT Voyager 1055
|
|
Linksys WUSB54GSv1
|
|
U.S. Robotics USR5420
|
|
BUFFALO WLI-USB-G54
|
|
|
|
All of these devices are based on Broadcom 4320 chip which is the
|
|
only wireless RNDIS chip known to date.
|
|
|
|
If you choose to build a module, it'll be called rndis_wlan.
|
|
|
|
config RTL8180
|
|
tristate "Realtek 8180/8185 PCI support"
|
|
depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
|
|
select EEPROM_93CX6
|
|
---help---
|
|
This is a driver for RTL8180 and RTL8185 based cards.
|
|
These are PCI based chips found in cards such as:
|
|
|
|
(RTL8185 802.11g)
|
|
A-Link WL54PC
|
|
|
|
(RTL8180 802.11b)
|
|
Belkin F5D6020 v3
|
|
Belkin F5D6020 v3
|
|
Dlink DWL-610
|
|
Dlink DWL-510
|
|
Netgear MA521
|
|
Level-One WPC-0101
|
|
Acer Aspire 1357 LMi
|
|
VCTnet PC-11B1
|
|
Ovislink AirLive WL-1120PCM
|
|
Mentor WL-PCI
|
|
Linksys WPC11 v4
|
|
TrendNET TEW-288PI
|
|
D-Link DWL-520 Rev D
|
|
Repotec RP-WP7126
|
|
TP-Link TL-WN250/251
|
|
Zonet ZEW1000
|
|
Longshine LCS-8031-R
|
|
HomeLine HLW-PCC200
|
|
GigaFast WF721-AEX
|
|
Planet WL-3553
|
|
Encore ENLWI-PCI1-NT
|
|
TrendNET TEW-266PC
|
|
Gigabyte GN-WLMR101
|
|
Siemens-fujitsu Amilo D1840W
|
|
Edimax EW-7126
|
|
PheeNet WL-11PCIR
|
|
Tonze PC-2100T
|
|
Planet WL-8303
|
|
Dlink DWL-650 v M1
|
|
Edimax EW-7106
|
|
Q-Tec 770WC
|
|
Topcom Skyr@cer 4011b
|
|
Roper FreeLan 802.11b (edition 2004)
|
|
Wistron Neweb Corp CB-200B
|
|
Pentagram HorNET
|
|
QTec 775WC
|
|
TwinMOS Booming B Series
|
|
Micronet SP906BB
|
|
Sweex LC700010
|
|
Surecom EP-9428
|
|
Safecom SWLCR-1100
|
|
|
|
Thanks to Realtek for their support!
|
|
|
|
config RTL8187
|
|
tristate "Realtek 8187 and 8187B USB support"
|
|
depends on MAC80211 && USB && WLAN_80211
|
|
select EEPROM_93CX6
|
|
---help---
|
|
This is a driver for RTL8187 and RTL8187B based cards.
|
|
These are USB based chips found in devices such as:
|
|
|
|
Netgear WG111v2
|
|
Level 1 WNC-0301USB
|
|
Micronet SP907GK V5
|
|
Encore ENUWI-G2
|
|
Trendnet TEW-424UB
|
|
ASUS P5B Deluxe
|
|
Toshiba Satellite Pro series of laptops
|
|
Asus Wireless Link
|
|
|
|
Thanks to Realtek for their support!
|
|
|
|
# If possible, automatically enable LEDs for RTL8187.
|
|
|
|
config RTL8187_LEDS
|
|
bool
|
|
depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187)
|
|
default y
|
|
|
|
config ADM8211
|
|
tristate "ADMtek ADM8211 support"
|
|
depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
|
|
select CRC32
|
|
select EEPROM_93CX6
|
|
---help---
|
|
This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
|
|
These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
|
|
|
|
Xterasys Cardbus XN-2411b
|
|
Blitz NetWave Point PC
|
|
TrendNet 221pc
|
|
Belkin F5D6001
|
|
SMC 2635W
|
|
Linksys WPC11 v1
|
|
Fiberline FL-WL-200X
|
|
3com Office Connect (3CRSHPW796)
|
|
Corega WLPCIB-11
|
|
SMC 2602W V2 EU
|
|
D-Link DWL-520 Revision C
|
|
|
|
However, some of these cards have been replaced with other chips
|
|
like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
|
|
the Ralink RT2400 (SMC2635W) without a model number change.
|
|
|
|
Thanks to Infineon-ADMtek for their support of this driver.
|
|
|
|
config MAC80211_HWSIM
|
|
tristate "Simulated radio testing tool for mac80211"
|
|
depends on MAC80211 && WLAN_80211
|
|
---help---
|
|
This driver is a developer testing tool that can be used to test
|
|
IEEE 802.11 networking stack (mac80211) functionality. This is not
|
|
needed for normal wireless LAN usage and is only for testing. See
|
|
Documentation/networking/mac80211_hwsim for more information on how
|
|
to use this tool.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called mac80211_hwsim. If unsure, say N.
|
|
|
|
config MWL8K
|
|
tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
|
|
depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
|
|
---help---
|
|
This driver supports Marvell TOPDOG 802.11 wireless cards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called mwl8k. If unsure, say N.
|
|
|
|
source "drivers/net/wireless/p54/Kconfig"
|
|
source "drivers/net/wireless/ath/Kconfig"
|
|
source "drivers/net/wireless/ipw2x00/Kconfig"
|
|
source "drivers/net/wireless/iwlwifi/Kconfig"
|
|
source "drivers/net/wireless/hostap/Kconfig"
|
|
source "drivers/net/wireless/b43/Kconfig"
|
|
source "drivers/net/wireless/b43legacy/Kconfig"
|
|
source "drivers/net/wireless/zd1211rw/Kconfig"
|
|
source "drivers/net/wireless/rt2x00/Kconfig"
|
|
source "drivers/net/wireless/orinoco/Kconfig"
|
|
|
|
endmenu
|