![Kumar Gala](/assets/img/avatar_default.png)
We shouldn't directly access sysdata to get the device node to just go get the pci_controller. We can call pci_bus_to_host() for this purpose. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
430 lines
9.8 KiB
C
430 lines
9.8 KiB
C
/*
|
|
* Support for SCC external PCI
|
|
*
|
|
* (C) Copyright 2004-2007 TOSHIBA CORPORATION
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/threads.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci_regs.h>
|
|
#include <linux/bootmem.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/ppc-pci.h>
|
|
|
|
#include "celleb_scc.h"
|
|
#include "celleb_pci.h"
|
|
|
|
#define MAX_PCI_DEVICES 32
|
|
#define MAX_PCI_FUNCTIONS 8
|
|
|
|
#define iob() __asm__ __volatile__("eieio; sync":::"memory")
|
|
|
|
static inline PCI_IO_ADDR celleb_epci_get_epci_base(
|
|
struct pci_controller *hose)
|
|
{
|
|
/*
|
|
* Note:
|
|
* Celleb epci uses cfg_addr as a base address for
|
|
* epci control registers.
|
|
*/
|
|
|
|
return hose->cfg_addr;
|
|
}
|
|
|
|
static inline PCI_IO_ADDR celleb_epci_get_epci_cfg(
|
|
struct pci_controller *hose)
|
|
{
|
|
/*
|
|
* Note:
|
|
* Celleb epci uses cfg_data as a base address for
|
|
* configuration area for epci devices.
|
|
*/
|
|
|
|
return hose->cfg_data;
|
|
}
|
|
|
|
static inline void clear_and_disable_master_abort_interrupt(
|
|
struct pci_controller *hose)
|
|
{
|
|
PCI_IO_ADDR epci_base;
|
|
PCI_IO_ADDR reg;
|
|
epci_base = celleb_epci_get_epci_base(hose);
|
|
reg = epci_base + PCI_COMMAND;
|
|
out_be32(reg, in_be32(reg) | (PCI_STATUS_REC_MASTER_ABORT << 16));
|
|
}
|
|
|
|
static int celleb_epci_check_abort(struct pci_controller *hose,
|
|
PCI_IO_ADDR addr)
|
|
{
|
|
PCI_IO_ADDR reg;
|
|
PCI_IO_ADDR epci_base;
|
|
u32 val;
|
|
|
|
iob();
|
|
epci_base = celleb_epci_get_epci_base(hose);
|
|
|
|
reg = epci_base + PCI_COMMAND;
|
|
val = in_be32(reg);
|
|
|
|
if (val & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
|
|
out_be32(reg,
|
|
(val & 0xffff) | (PCI_STATUS_REC_MASTER_ABORT << 16));
|
|
|
|
/* clear PCI Controller error, FRE, PMFE */
|
|
reg = epci_base + SCC_EPCI_STATUS;
|
|
out_be32(reg, SCC_EPCI_INT_PAI);
|
|
|
|
reg = epci_base + SCC_EPCI_VCSR;
|
|
val = in_be32(reg) & 0xffff;
|
|
val |= SCC_EPCI_VCSR_FRE;
|
|
out_be32(reg, val);
|
|
|
|
reg = epci_base + SCC_EPCI_VISTAT;
|
|
out_be32(reg, SCC_EPCI_VISTAT_PMFE);
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static PCI_IO_ADDR celleb_epci_make_config_addr(struct pci_bus *bus,
|
|
struct pci_controller *hose, unsigned int devfn, int where)
|
|
{
|
|
PCI_IO_ADDR addr;
|
|
|
|
if (bus != hose->bus)
|
|
addr = celleb_epci_get_epci_cfg(hose) +
|
|
(((bus->number & 0xff) << 16)
|
|
| ((devfn & 0xff) << 8)
|
|
| (where & 0xff)
|
|
| 0x01000000);
|
|
else
|
|
addr = celleb_epci_get_epci_cfg(hose) +
|
|
(((devfn & 0xff) << 8) | (where & 0xff));
|
|
|
|
pr_debug("EPCI: config_addr = 0x%p\n", addr);
|
|
|
|
return addr;
|
|
}
|
|
|
|
static int celleb_epci_read_config(struct pci_bus *bus,
|
|
unsigned int devfn, int where, int size, u32 *val)
|
|
{
|
|
PCI_IO_ADDR epci_base;
|
|
PCI_IO_ADDR addr;
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
|
|
/* allignment check */
|
|
BUG_ON(where % size);
|
|
|
|
if (!celleb_epci_get_epci_cfg(hose))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (bus->number == hose->first_busno && devfn == 0) {
|
|
/* EPCI controller self */
|
|
|
|
epci_base = celleb_epci_get_epci_base(hose);
|
|
addr = epci_base + where;
|
|
|
|
switch (size) {
|
|
case 1:
|
|
*val = in_8(addr);
|
|
break;
|
|
case 2:
|
|
*val = in_be16(addr);
|
|
break;
|
|
case 4:
|
|
*val = in_be32(addr);
|
|
break;
|
|
default:
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
} else {
|
|
|
|
clear_and_disable_master_abort_interrupt(hose);
|
|
addr = celleb_epci_make_config_addr(bus, hose, devfn, where);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
*val = in_8(addr);
|
|
break;
|
|
case 2:
|
|
*val = in_le16(addr);
|
|
break;
|
|
case 4:
|
|
*val = in_le32(addr);
|
|
break;
|
|
default:
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
}
|
|
|
|
pr_debug("EPCI: "
|
|
"addr=0x%p, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n",
|
|
addr, devfn, where, size, *val);
|
|
|
|
return celleb_epci_check_abort(hose, NULL);
|
|
}
|
|
|
|
static int celleb_epci_write_config(struct pci_bus *bus,
|
|
unsigned int devfn, int where, int size, u32 val)
|
|
{
|
|
PCI_IO_ADDR epci_base;
|
|
PCI_IO_ADDR addr;
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
|
|
/* allignment check */
|
|
BUG_ON(where % size);
|
|
|
|
if (!celleb_epci_get_epci_cfg(hose))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (bus->number == hose->first_busno && devfn == 0) {
|
|
/* EPCI controller self */
|
|
|
|
epci_base = celleb_epci_get_epci_base(hose);
|
|
addr = epci_base + where;
|
|
|
|
switch (size) {
|
|
case 1:
|
|
out_8(addr, val);
|
|
break;
|
|
case 2:
|
|
out_be16(addr, val);
|
|
break;
|
|
case 4:
|
|
out_be32(addr, val);
|
|
break;
|
|
default:
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
} else {
|
|
|
|
clear_and_disable_master_abort_interrupt(hose);
|
|
addr = celleb_epci_make_config_addr(bus, hose, devfn, where);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
out_8(addr, val);
|
|
break;
|
|
case 2:
|
|
out_le16(addr, val);
|
|
break;
|
|
case 4:
|
|
out_le32(addr, val);
|
|
break;
|
|
default:
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
}
|
|
|
|
return celleb_epci_check_abort(hose, addr);
|
|
}
|
|
|
|
struct pci_ops celleb_epci_ops = {
|
|
.read = celleb_epci_read_config,
|
|
.write = celleb_epci_write_config,
|
|
};
|
|
|
|
/* to be moved in FW */
|
|
static int __init celleb_epci_init(struct pci_controller *hose)
|
|
{
|
|
u32 val;
|
|
PCI_IO_ADDR reg;
|
|
PCI_IO_ADDR epci_base;
|
|
int hwres = 0;
|
|
|
|
epci_base = celleb_epci_get_epci_base(hose);
|
|
|
|
/* PCI core reset(Internal bus and PCI clock) */
|
|
reg = epci_base + SCC_EPCI_CKCTRL;
|
|
val = in_be32(reg);
|
|
if (val == 0x00030101)
|
|
hwres = 1;
|
|
else {
|
|
val &= ~(SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1);
|
|
out_be32(reg, val);
|
|
|
|
/* set PCI core clock */
|
|
val = in_be32(reg);
|
|
val |= (SCC_EPCI_CKCTRL_OCLKEN | SCC_EPCI_CKCTRL_LCLKEN);
|
|
out_be32(reg, val);
|
|
|
|
/* release PCI core reset (internal bus) */
|
|
val = in_be32(reg);
|
|
val |= SCC_EPCI_CKCTRL_CRST0;
|
|
out_be32(reg, val);
|
|
|
|
/* set PCI clock select */
|
|
reg = epci_base + SCC_EPCI_CLKRST;
|
|
val = in_be32(reg);
|
|
val &= ~SCC_EPCI_CLKRST_CKS_MASK;
|
|
val |= SCC_EPCI_CLKRST_CKS_2;
|
|
out_be32(reg, val);
|
|
|
|
/* set arbiter */
|
|
reg = epci_base + SCC_EPCI_ABTSET;
|
|
out_be32(reg, 0x0f1f001f); /* temporary value */
|
|
|
|
/* buffer on */
|
|
reg = epci_base + SCC_EPCI_CLKRST;
|
|
val = in_be32(reg);
|
|
val |= SCC_EPCI_CLKRST_BC;
|
|
out_be32(reg, val);
|
|
|
|
/* PCI clock enable */
|
|
val = in_be32(reg);
|
|
val |= SCC_EPCI_CLKRST_PCKEN;
|
|
out_be32(reg, val);
|
|
|
|
/* release PCI core reset (all) */
|
|
reg = epci_base + SCC_EPCI_CKCTRL;
|
|
val = in_be32(reg);
|
|
val |= (SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1);
|
|
out_be32(reg, val);
|
|
|
|
/* set base translation registers. (already set by Beat) */
|
|
|
|
/* set base address masks. (already set by Beat) */
|
|
}
|
|
|
|
/* release interrupt masks and clear all interrupts */
|
|
reg = epci_base + SCC_EPCI_INTSET;
|
|
out_be32(reg, 0x013f011f); /* all interrupts enable */
|
|
reg = epci_base + SCC_EPCI_VIENAB;
|
|
val = SCC_EPCI_VIENAB_PMPEE | SCC_EPCI_VIENAB_PMFEE;
|
|
out_be32(reg, val);
|
|
reg = epci_base + SCC_EPCI_STATUS;
|
|
out_be32(reg, 0xffffffff);
|
|
reg = epci_base + SCC_EPCI_VISTAT;
|
|
out_be32(reg, 0xffffffff);
|
|
|
|
/* disable PCI->IB address translation */
|
|
reg = epci_base + SCC_EPCI_VCSR;
|
|
val = in_be32(reg);
|
|
val &= ~(SCC_EPCI_VCSR_DR | SCC_EPCI_VCSR_AT);
|
|
out_be32(reg, val);
|
|
|
|
/* set base addresses. (no need to set?) */
|
|
|
|
/* memory space, bus master enable */
|
|
reg = epci_base + PCI_COMMAND;
|
|
val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
|
|
out_be32(reg, val);
|
|
|
|
/* endian mode setup */
|
|
reg = epci_base + SCC_EPCI_ECMODE;
|
|
val = 0x00550155;
|
|
out_be32(reg, val);
|
|
|
|
/* set control option */
|
|
reg = epci_base + SCC_EPCI_CNTOPT;
|
|
val = in_be32(reg);
|
|
val |= SCC_EPCI_CNTOPT_O2PMB;
|
|
out_be32(reg, val);
|
|
|
|
/* XXX: temporay: set registers for address conversion setup */
|
|
reg = epci_base + SCC_EPCI_CNF10_REG;
|
|
out_be32(reg, 0x80000008);
|
|
reg = epci_base + SCC_EPCI_CNF14_REG;
|
|
out_be32(reg, 0x40000008);
|
|
|
|
reg = epci_base + SCC_EPCI_BAM0;
|
|
out_be32(reg, 0x80000000);
|
|
reg = epci_base + SCC_EPCI_BAM1;
|
|
out_be32(reg, 0xe0000000);
|
|
|
|
reg = epci_base + SCC_EPCI_PVBAT;
|
|
out_be32(reg, 0x80000000);
|
|
|
|
if (!hwres) {
|
|
/* release external PCI reset */
|
|
reg = epci_base + SCC_EPCI_CLKRST;
|
|
val = in_be32(reg);
|
|
val |= SCC_EPCI_CLKRST_PCIRST;
|
|
out_be32(reg, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init celleb_setup_epci(struct device_node *node,
|
|
struct pci_controller *hose)
|
|
{
|
|
struct resource r;
|
|
|
|
pr_debug("PCI: celleb_setup_epci()\n");
|
|
|
|
/*
|
|
* Note:
|
|
* Celleb epci uses cfg_addr and cfg_data member of
|
|
* pci_controller structure in irregular way.
|
|
*
|
|
* cfg_addr is used to map for control registers of
|
|
* celleb epci.
|
|
*
|
|
* cfg_data is used for configuration area of devices
|
|
* on Celleb epci buses.
|
|
*/
|
|
|
|
if (of_address_to_resource(node, 0, &r))
|
|
goto error;
|
|
hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1));
|
|
if (!hose->cfg_addr)
|
|
goto error;
|
|
pr_debug("EPCI: cfg_addr map 0x%016llx->0x%016lx + 0x%016llx\n",
|
|
r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1));
|
|
|
|
if (of_address_to_resource(node, 2, &r))
|
|
goto error;
|
|
hose->cfg_data = ioremap(r.start, (r.end - r.start + 1));
|
|
if (!hose->cfg_data)
|
|
goto error;
|
|
pr_debug("EPCI: cfg_data map 0x%016llx->0x%016lx + 0x%016llx\n",
|
|
r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1));
|
|
|
|
hose->ops = &celleb_epci_ops;
|
|
celleb_epci_init(hose);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
if (hose->cfg_addr)
|
|
iounmap(hose->cfg_addr);
|
|
|
|
if (hose->cfg_data)
|
|
iounmap(hose->cfg_data);
|
|
return 1;
|
|
}
|
|
|
|
struct celleb_phb_spec celleb_epci_spec __initdata = {
|
|
.setup = celleb_setup_epci,
|
|
.ops = &spiderpci_ops,
|
|
.iowa_init = &spiderpci_iowa_init,
|
|
.iowa_data = (void *)0,
|
|
};
|