![Paul Gortmaker](/assets/img/avatar_default.png)
The PCI-e addressing was originally patterned of the MPC8548CDS which has PCI1, PCI2, and PCI-e. Since this board only has PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS board. This does that by cutting the PCI/PCI-e I/O sizes from 16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000 (the hole where PCI2 I/O would have been). This also fixes a typo where an extra zero made an 8MB range a 128MB range, removes the hole left by PCI2 from the aliases, and sets the clocks to match the oscillators that are actually on the board. With accompanying u-boot updates, PCI-e has been validated with both a sky2 card (1148:9e00) and an e1000 card (8086:108b). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
429 lines
9.7 KiB
Text
429 lines
9.7 KiB
Text
/*
|
|
* SBC8548 Device Tree Source
|
|
*
|
|
* Copyright 2007 Wind River Systems Inc.
|
|
*
|
|
* Paul Gortmaker (see MAINTAINERS for contact information)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "SBC8548";
|
|
compatible = "SBC8548";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8548@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <0x20>; // 32 bytes
|
|
i-cache-line-size = <0x20>; // 32 bytes
|
|
d-cache-size = <0x8000>; // L1, 32K
|
|
i-cache-size = <0x8000>; // L1, 32K
|
|
timebase-frequency = <0>; // From uboot
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>;
|
|
};
|
|
|
|
localbus@e0000000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
reg = <0xe0000000 0x5000>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/
|
|
0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
|
|
0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
|
|
0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
|
|
0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/
|
|
|
|
|
|
flash@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x800000>;
|
|
bank-width = <1>;
|
|
device-width = <1>;
|
|
partition@0x0 {
|
|
label = "space";
|
|
reg = <0x00000000 0x00100000>;
|
|
};
|
|
partition@0x100000 {
|
|
label = "bootloader";
|
|
reg = <0x00100000 0x00700000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
epld@5,0 {
|
|
compatible = "wrs,epld-localbus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
reg = <0x5 0x0 0x00b10000>;
|
|
ranges = <
|
|
0x0 0x0 0x5 0x000000 0x1fff /* LED */
|
|
0x1 0x0 0x5 0x100000 0x1fff /* Switches */
|
|
0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
|
|
0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
|
|
>;
|
|
|
|
led@0,0 {
|
|
compatible = "led";
|
|
reg = <0x0 0x0 0x1fff>;
|
|
};
|
|
|
|
switches@1,0 {
|
|
compatible = "switches";
|
|
reg = <0x1 0x0 0x1fff>;
|
|
};
|
|
|
|
hw-rev@3,0 {
|
|
compatible = "hw-rev";
|
|
reg = <0x3 0x0 0x1fff>;
|
|
};
|
|
|
|
eeprom@b,0 {
|
|
compatible = "eeprom";
|
|
reg = <0xb 0 0x1fff>;
|
|
};
|
|
|
|
};
|
|
|
|
alt-flash@6,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x6 0x0 0x04000000>;
|
|
compatible = "cfi-flash";
|
|
bank-width = <4>;
|
|
device-width = <1>;
|
|
partition@0x0 {
|
|
label = "bootloader";
|
|
reg = <0x00000000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@0x00100000 {
|
|
label = "file-system";
|
|
reg = <0x00100000 0x01f00000>;
|
|
};
|
|
partition@0x02000000 {
|
|
label = "boot-config";
|
|
reg = <0x02000000 0x00100000>;
|
|
};
|
|
partition@0x02100000 {
|
|
label = "space";
|
|
reg = <0x02100000 0x01f00000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
soc8548@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
ranges = <0x00000000 0xe0000000 0x00100000>;
|
|
bus-frequency = <0>;
|
|
compatible = "simple-bus";
|
|
|
|
ecm-law@0 {
|
|
compatible = "fsl,ecm-law";
|
|
reg = <0x0 0x1000>;
|
|
fsl,num-laws = <10>;
|
|
};
|
|
|
|
ecm@1000 {
|
|
compatible = "fsl,mpc8548-ecm", "fsl,ecm";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <17 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,mpc8548-memory-controller";
|
|
reg = <0x2000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <0x12 0x2>;
|
|
};
|
|
|
|
L2: l2-cache-controller@20000 {
|
|
compatible = "fsl,mpc8548-l2-cache-controller";
|
|
reg = <0x20000 0x1000>;
|
|
cache-line-size = <0x20>; // 32 bytes
|
|
cache-size = <0x80000>; // L2, 512K
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <0x10 0x2>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <0x2b 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <0x2b 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
|
|
reg = <0x21300 0x4>;
|
|
ranges = <0x0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8548-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <20 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8548-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <21 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8548-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <22 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8548-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x24000 0x1000>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&phy0>;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
reg = <0x520 0x20>;
|
|
|
|
phy0: ethernet-phy@19 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <0x6 0x1>;
|
|
reg = <0x19>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy1: ethernet-phy@1a {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <0x7 0x1>;
|
|
reg = <0x1a>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <1>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x25000 0x1000>;
|
|
ranges = <0x0 0x25000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
tbi-handle = <&tbi1>;
|
|
phy-handle = <&phy1>;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-tbi";
|
|
reg = <0x520 0x20>;
|
|
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>; // reg base, size
|
|
clock-frequency = <0>; // should we fill in in uboot?
|
|
interrupts = <0x2a 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>; // reg base, size
|
|
clock-frequency = <0>; // should we fill in in uboot?
|
|
interrupts = <0x2a 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
global-utilities@e0000 { //global utilities reg
|
|
compatible = "fsl,mpc8548-guts";
|
|
reg = <0xe0000 0x1000>;
|
|
fsl,has-rstcr;
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec2.1", "fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <45 2>;
|
|
interrupt-parent = <&mpic>;
|
|
fsl,num-channels = <4>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0xfe>;
|
|
fsl,descriptor-types-mask = <0x12b0ebf>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x40000 0x40000>;
|
|
compatible = "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
};
|
|
};
|
|
|
|
pci0: pci@e0008000 {
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x01 (PCI-X slot) @66MHz */
|
|
0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
|
|
0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
|
|
0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
|
|
0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
|
|
|
|
/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
|
|
0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
|
|
0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
|
|
0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
|
|
0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
|
|
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <0x18 0x2>;
|
|
bus-range = <0 0>;
|
|
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
|
|
clock-frequency = <66000000>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0008000 0x1000>;
|
|
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
|
|
device_type = "pci";
|
|
};
|
|
|
|
pci1: pcie@e000a000 {
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x0 (PEX) */
|
|
0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
|
|
0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
|
|
0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
|
|
0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
|
|
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <0x1a 0x2>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
|
|
0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
|
|
clock-frequency = <33000000>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe000a000 0x1000>;
|
|
compatible = "fsl,mpc8548-pcie";
|
|
device_type = "pci";
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x02000000 0x0 0xa0000000
|
|
0x02000000 0x0 0xa0000000
|
|
0x0 0x10000000
|
|
|
|
0x01000000 0x0 0x00000000
|
|
0x01000000 0x0 0x00000000
|
|
0x0 0x00800000>;
|
|
};
|
|
};
|
|
};
|