![Solomon Peachy](/assets/img/avatar_default.png)
This patch adds support for the ESTeem 195E Hotfoot SBC. There are several variants of the SBC deployed, single/dual ethernet+serial, and also 4MB/8MB flash variations. In the interest of having a single kernel image boot on all boards, the cuboot shim detects the differences and mangles the DTS tree appropriately. With the exception of the CF interface that was never populated on production boards, this code/DTS supports all boardpop options. Signed-off-by: Solomon Peachy <solomon@linux-wlan.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
295 lines
7 KiB
Text
295 lines
7 KiB
Text
/*
|
|
* Device Tree Source for ESTeem 195E Hotfoot
|
|
*
|
|
* Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "est,hotfoot";
|
|
compatible = "est,hotfoot";
|
|
dcr-parent = <&{/cpus/cpu@0}>;
|
|
|
|
aliases {
|
|
ethernet0 = &EMAC0;
|
|
ethernet1 = &EMAC1;
|
|
serial0 = &UART0;
|
|
serial1 = &UART1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
model = "PowerPC,405EP";
|
|
reg = <0x00000000>;
|
|
clock-frequency = <0>; /* Filled in by zImage */
|
|
timebase-frequency = <0>; /* Filled in by zImage */
|
|
i-cache-line-size = <0x20>;
|
|
d-cache-line-size = <0x20>;
|
|
i-cache-size = <0x4000>;
|
|
d-cache-size = <0x4000>;
|
|
dcr-controller;
|
|
dcr-access-method = "native";
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x00000000>; /* Filled in by zImage */
|
|
};
|
|
|
|
UIC0: interrupt-controller {
|
|
compatible = "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <0>;
|
|
dcr-reg = <0x0c0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
plb {
|
|
compatible = "ibm,plb3";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clock-frequency = <0>; /* Filled in by zImage */
|
|
|
|
SDRAM0: memory-controller {
|
|
compatible = "ibm,sdram-405ep";
|
|
dcr-reg = <0x010 0x002>;
|
|
};
|
|
|
|
MAL: mcmal {
|
|
compatible = "ibm,mcmal-405ep", "ibm,mcmal";
|
|
dcr-reg = <0x180 0x062>;
|
|
num-tx-chans = <4>;
|
|
num-rx-chans = <2>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <
|
|
0xb 0x4 /* TXEOB */
|
|
0xc 0x4 /* RXEOB */
|
|
0xa 0x4 /* SERR */
|
|
0xd 0x4 /* TXDE */
|
|
0xe 0x4 /* RXDE */>;
|
|
};
|
|
|
|
POB0: opb {
|
|
compatible = "ibm,opb-405ep", "ibm,opb";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0xef600000 0xef600000 0x00a00000>;
|
|
dcr-reg = <0x0a0 0x005>;
|
|
clock-frequency = <0>; /* Filled in by zImage */
|
|
|
|
/* Hotfoot has UART0/UART1 swapped */
|
|
|
|
UART0: serial@ef600400 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0xef600400 0x00000008>;
|
|
virtual-reg = <0xef600400>;
|
|
clock-frequency = <0>; /* Filled in by zImage */
|
|
current-speed = <0x9600>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x1 0x4>;
|
|
};
|
|
|
|
UART1: serial@ef600300 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0xef600300 0x00000008>;
|
|
virtual-reg = <0xef600300>;
|
|
clock-frequency = <0>; /* Filled in by zImage */
|
|
current-speed = <0x9600>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x0 0x4>;
|
|
};
|
|
|
|
IIC: i2c@ef600500 {
|
|
compatible = "ibm,iic-405ep", "ibm,iic";
|
|
reg = <0xef600500 0x00000011>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x2 0x4>;
|
|
|
|
rtc@68 {
|
|
/* Actually a DS1339 */
|
|
compatible = "dallas,ds1307";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
temp@4a {
|
|
/* Not present on all boards */
|
|
compatible = "national,lm75";
|
|
reg = <0x4a>;
|
|
};
|
|
};
|
|
|
|
GPIO: gpio@ef600700 {
|
|
#gpio-cells = <2>;
|
|
compatible = "ibm,ppc4xx-gpio";
|
|
reg = <0xef600700 0x00000020>;
|
|
gpio-controller;
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
status {
|
|
label = "Status";
|
|
gpios = <&GPIO 1 0>;
|
|
};
|
|
radiorx {
|
|
label = "Rx";
|
|
gpios = <&GPIO 0xe 0>;
|
|
};
|
|
};
|
|
|
|
EMAC0: ethernet@ef600800 {
|
|
linux,network-index = <0x0>;
|
|
device_type = "network";
|
|
compatible = "ibm,emac-405ep", "ibm,emac";
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <
|
|
0xf 0x4 /* Ethernet */
|
|
0x9 0x4 /* Ethernet Wake Up */>;
|
|
local-mac-address = [000000000000]; /* Filled in by zImage */
|
|
reg = <0xef600800 0x00000070>;
|
|
mal-device = <&MAL>;
|
|
mal-tx-channel = <0>;
|
|
mal-rx-channel = <0>;
|
|
cell-index = <0>;
|
|
max-frame-size = <0x5dc>;
|
|
rx-fifo-size = <0x1000>;
|
|
tx-fifo-size = <0x800>;
|
|
phy-mode = "mii";
|
|
phy-map = <0x00000000>;
|
|
};
|
|
|
|
EMAC1: ethernet@ef600900 {
|
|
linux,network-index = <0x1>;
|
|
device_type = "network";
|
|
compatible = "ibm,emac-405ep", "ibm,emac";
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <
|
|
0x11 0x4 /* Ethernet */
|
|
0x9 0x4 /* Ethernet Wake Up */>;
|
|
local-mac-address = [000000000000]; /* Filled in by zImage */
|
|
reg = <0xef600900 0x00000070>;
|
|
mal-device = <&MAL>;
|
|
mal-tx-channel = <2>;
|
|
mal-rx-channel = <1>;
|
|
cell-index = <1>;
|
|
max-frame-size = <0x5dc>;
|
|
rx-fifo-size = <0x1000>;
|
|
tx-fifo-size = <0x800>;
|
|
mdio-device = <&EMAC0>;
|
|
phy-mode = "mii";
|
|
phy-map = <0x0000001>;
|
|
};
|
|
};
|
|
|
|
EBC0: ebc {
|
|
compatible = "ibm,ebc-405ep", "ibm,ebc";
|
|
dcr-reg = <0x012 0x002>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
|
|
/* The ranges property is supplied by the bootwrapper
|
|
* and is based on the firmware's configuration of the
|
|
* EBC bridge
|
|
*/
|
|
clock-frequency = <0>; /* Filled in by zImage */
|
|
|
|
nor_flash@0 {
|
|
compatible = "cfi-flash";
|
|
bank-width = <2>;
|
|
reg = <0x0 0xff800000 0x00800000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* This mapping is for the 8M flash
|
|
4M flash has all ofssets -= 4M,
|
|
and FeatFS partition is not present */
|
|
partition@0 {
|
|
label = "Bootloader";
|
|
reg = <0x7c0000 0x40000>;
|
|
/* read-only; */
|
|
};
|
|
partition@1 {
|
|
label = "Env_and_Config_Primary";
|
|
reg = <0x400000 0x10000>;
|
|
};
|
|
partition@2 {
|
|
label = "Kernel";
|
|
reg = <0x420000 0x100000>;
|
|
};
|
|
partition@3 {
|
|
label = "Filesystem";
|
|
reg = <0x520000 0x2a0000>;
|
|
};
|
|
partition@4 {
|
|
label = "Env_and_Config_Secondary";
|
|
reg = <0x410000 0x10000>;
|
|
};
|
|
partition@5 {
|
|
label = "FeatFS";
|
|
reg = <0x000000 0x400000>;
|
|
};
|
|
partition@6 {
|
|
label = "Bootloader_Env";
|
|
reg = <0x7d0000 0x10000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
PCI0: pci@ec000000 {
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
|
|
primary;
|
|
reg = <0xeec00000 0x00000008 /* Config space access */
|
|
0xeed80000 0x00000004 /* IACK */
|
|
0xeed80000 0x00000004 /* Special cycle */
|
|
0xef480000 0x00000040>; /* Internal registers */
|
|
|
|
/* Outbound ranges, one memory and one IO,
|
|
* later cannot be changed. Chip supports a second
|
|
* IO range but we don't use it for now
|
|
*/
|
|
ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
|
|
0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
|
|
|
|
/* Inbound 2GB range starting at 0 */
|
|
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
|
|
|
|
interrupt-parent = <&UIC0>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
|
|
0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
|
|
0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
|
|
|
|
/* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
|
|
0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
|
|
0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
|
|
>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = &UART0;
|
|
};
|
|
};
|