![Linus Torvalds](/assets/img/avatar_default.png)
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
485 lines
13 KiB
C
485 lines
13 KiB
C
/*
|
|
i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
monitoring
|
|
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
|
|
Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
|
|
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
Copyright (C) 2005 - 2007 Jean Delvare <khali@linux-fr.org>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/*
|
|
Supports the following VIA south bridges:
|
|
|
|
Chip name PCI ID REV I2C block
|
|
VT82C596A 0x3050 no
|
|
VT82C596B 0x3051 no
|
|
VT82C686A 0x3057 0x30 no
|
|
VT82C686B 0x3057 0x40 yes
|
|
VT8231 0x8235 no?
|
|
VT8233 0x3074 yes
|
|
VT8233A 0x3147 yes?
|
|
VT8235 0x3177 yes
|
|
VT8237R 0x3227 yes
|
|
VT8237A 0x3337 yes
|
|
VT8251 0x3287 yes
|
|
CX700 0x8324 yes
|
|
|
|
Note: we assume there can only be one device, with one SMBus interface.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <asm/io.h>
|
|
|
|
static struct pci_dev *vt596_pdev;
|
|
|
|
#define SMBBA1 0x90
|
|
#define SMBBA2 0x80
|
|
#define SMBBA3 0xD0
|
|
|
|
/* SMBus address offsets */
|
|
static unsigned short vt596_smba;
|
|
#define SMBHSTSTS (vt596_smba + 0)
|
|
#define SMBHSTCNT (vt596_smba + 2)
|
|
#define SMBHSTCMD (vt596_smba + 3)
|
|
#define SMBHSTADD (vt596_smba + 4)
|
|
#define SMBHSTDAT0 (vt596_smba + 5)
|
|
#define SMBHSTDAT1 (vt596_smba + 6)
|
|
#define SMBBLKDAT (vt596_smba + 7)
|
|
|
|
/* PCI Address Constants */
|
|
|
|
/* SMBus data in configuration space can be found in two places,
|
|
We try to select the better one */
|
|
|
|
static unsigned short SMBHSTCFG = 0xD2;
|
|
|
|
/* Other settings */
|
|
#define MAX_TIMEOUT 500
|
|
|
|
/* VT82C596 constants */
|
|
#define VT596_QUICK 0x00
|
|
#define VT596_BYTE 0x04
|
|
#define VT596_BYTE_DATA 0x08
|
|
#define VT596_WORD_DATA 0x0C
|
|
#define VT596_BLOCK_DATA 0x14
|
|
#define VT596_I2C_BLOCK_DATA 0x34
|
|
|
|
|
|
/* If force is set to anything different from 0, we forcibly enable the
|
|
VT596. DANGEROUS! */
|
|
static int force;
|
|
module_param(force, bool, 0);
|
|
MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!");
|
|
|
|
/* If force_addr is set to anything different from 0, we forcibly enable
|
|
the VT596 at the given address. VERY DANGEROUS! */
|
|
static u16 force_addr;
|
|
module_param(force_addr, ushort, 0);
|
|
MODULE_PARM_DESC(force_addr,
|
|
"Forcibly enable the SMBus at the given address. "
|
|
"EXTREMELY DANGEROUS!");
|
|
|
|
|
|
static struct pci_driver vt596_driver;
|
|
static struct i2c_adapter vt596_adapter;
|
|
|
|
#define FEATURE_I2CBLOCK (1<<0)
|
|
static unsigned int vt596_features;
|
|
|
|
#ifdef DEBUG
|
|
static void vt596_dump_regs(const char *msg, u8 size)
|
|
{
|
|
dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
|
|
"DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
|
|
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
|
|
inb_p(SMBHSTDAT1));
|
|
|
|
if (size == VT596_BLOCK_DATA
|
|
|| size == VT596_I2C_BLOCK_DATA) {
|
|
int i;
|
|
|
|
dev_dbg(&vt596_adapter.dev, "BLK=");
|
|
for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
|
|
printk("%02x,", inb_p(SMBBLKDAT));
|
|
printk("\n");
|
|
dev_dbg(&vt596_adapter.dev, " ");
|
|
for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
|
|
printk("%02x,", inb_p(SMBBLKDAT));
|
|
printk("%02x\n", inb_p(SMBBLKDAT));
|
|
}
|
|
}
|
|
#else
|
|
static inline void vt596_dump_regs(const char *msg, u8 size) { }
|
|
#endif
|
|
|
|
/* Return -1 on error, 0 on success */
|
|
static int vt596_transaction(u8 size)
|
|
{
|
|
int temp;
|
|
int result = 0;
|
|
int timeout = 0;
|
|
|
|
vt596_dump_regs("Transaction (pre)", size);
|
|
|
|
/* Make sure the SMBus host is ready to start transmitting */
|
|
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
|
|
dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
|
|
"Resetting...\n", temp);
|
|
|
|
outb_p(temp, SMBHSTSTS);
|
|
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
|
|
dev_err(&vt596_adapter.dev, "SMBus reset failed! "
|
|
"(0x%02x)\n", temp);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Start the transaction by setting bit 6 */
|
|
outb_p(0x40 | size, SMBHSTCNT);
|
|
|
|
/* We will always wait for a fraction of a second */
|
|
do {
|
|
msleep(1);
|
|
temp = inb_p(SMBHSTSTS);
|
|
} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
|
|
|
|
/* If the SMBus is still busy, we give up */
|
|
if (timeout >= MAX_TIMEOUT) {
|
|
result = -1;
|
|
dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
|
|
}
|
|
|
|
if (temp & 0x10) {
|
|
result = -1;
|
|
dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
|
|
size);
|
|
}
|
|
|
|
if (temp & 0x08) {
|
|
result = -1;
|
|
dev_err(&vt596_adapter.dev, "SMBus collision!\n");
|
|
}
|
|
|
|
if (temp & 0x04) {
|
|
int read = inb_p(SMBHSTADD) & 0x01;
|
|
result = -1;
|
|
/* The quick and receive byte commands are used to probe
|
|
for chips, so errors are expected, and we don't want
|
|
to frighten the user. */
|
|
if (!((size == VT596_QUICK && !read) ||
|
|
(size == VT596_BYTE && read)))
|
|
dev_err(&vt596_adapter.dev, "Transaction error!\n");
|
|
}
|
|
|
|
/* Resetting status register */
|
|
if (temp & 0x1F)
|
|
outb_p(temp, SMBHSTSTS);
|
|
|
|
vt596_dump_regs("Transaction (post)", size);
|
|
|
|
return result;
|
|
}
|
|
|
|
/* Return -1 on error, 0 on success */
|
|
static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write, u8 command,
|
|
int size, union i2c_smbus_data *data)
|
|
{
|
|
int i;
|
|
|
|
switch (size) {
|
|
case I2C_SMBUS_QUICK:
|
|
size = VT596_QUICK;
|
|
break;
|
|
case I2C_SMBUS_BYTE:
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
outb_p(command, SMBHSTCMD);
|
|
size = VT596_BYTE;
|
|
break;
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
outb_p(command, SMBHSTCMD);
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
outb_p(data->byte, SMBHSTDAT0);
|
|
size = VT596_BYTE_DATA;
|
|
break;
|
|
case I2C_SMBUS_WORD_DATA:
|
|
outb_p(command, SMBHSTCMD);
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
outb_p(data->word & 0xff, SMBHSTDAT0);
|
|
outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
|
|
}
|
|
size = VT596_WORD_DATA;
|
|
break;
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
if (!(vt596_features & FEATURE_I2CBLOCK))
|
|
goto exit_unsupported;
|
|
if (read_write == I2C_SMBUS_READ)
|
|
outb_p(data->block[0], SMBHSTDAT0);
|
|
/* Fall through */
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
outb_p(command, SMBHSTCMD);
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
u8 len = data->block[0];
|
|
if (len > I2C_SMBUS_BLOCK_MAX)
|
|
len = I2C_SMBUS_BLOCK_MAX;
|
|
outb_p(len, SMBHSTDAT0);
|
|
inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
|
|
for (i = 1; i <= len; i++)
|
|
outb_p(data->block[i], SMBBLKDAT);
|
|
}
|
|
size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
|
|
VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
|
|
break;
|
|
default:
|
|
goto exit_unsupported;
|
|
}
|
|
|
|
outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
|
|
|
|
if (vt596_transaction(size)) /* Error in transaction */
|
|
return -1;
|
|
|
|
if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
|
|
return 0;
|
|
|
|
switch (size) {
|
|
case VT596_BYTE:
|
|
case VT596_BYTE_DATA:
|
|
data->byte = inb_p(SMBHSTDAT0);
|
|
break;
|
|
case VT596_WORD_DATA:
|
|
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
|
|
break;
|
|
case VT596_I2C_BLOCK_DATA:
|
|
case VT596_BLOCK_DATA:
|
|
data->block[0] = inb_p(SMBHSTDAT0);
|
|
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
|
|
data->block[0] = I2C_SMBUS_BLOCK_MAX;
|
|
inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
|
|
for (i = 1; i <= data->block[0]; i++)
|
|
data->block[i] = inb_p(SMBBLKDAT);
|
|
break;
|
|
}
|
|
return 0;
|
|
|
|
exit_unsupported:
|
|
dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
|
|
size);
|
|
return -1;
|
|
}
|
|
|
|
static u32 vt596_func(struct i2c_adapter *adapter)
|
|
{
|
|
u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA;
|
|
|
|
if (vt596_features & FEATURE_I2CBLOCK)
|
|
func |= I2C_FUNC_SMBUS_I2C_BLOCK;
|
|
return func;
|
|
}
|
|
|
|
static const struct i2c_algorithm smbus_algorithm = {
|
|
.smbus_xfer = vt596_access,
|
|
.functionality = vt596_func,
|
|
};
|
|
|
|
static struct i2c_adapter vt596_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.id = I2C_HW_SMBUS_VIA2,
|
|
.class = I2C_CLASS_HWMON,
|
|
.algo = &smbus_algorithm,
|
|
};
|
|
|
|
static int __devinit vt596_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
unsigned char temp;
|
|
int error = -ENODEV;
|
|
|
|
/* Determine the address of the SMBus areas */
|
|
if (force_addr) {
|
|
vt596_smba = force_addr & 0xfff0;
|
|
force = 0;
|
|
goto found;
|
|
}
|
|
|
|
if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
|
|
!(vt596_smba & 0x0001)) {
|
|
/* try 2nd address and config reg. for 596 */
|
|
if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
|
|
!pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
|
|
(vt596_smba & 0x0001)) {
|
|
SMBHSTCFG = 0x84;
|
|
} else {
|
|
/* no matches at all */
|
|
dev_err(&pdev->dev, "Cannot configure "
|
|
"SMBus I/O Base address\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
vt596_smba &= 0xfff0;
|
|
if (vt596_smba == 0) {
|
|
dev_err(&pdev->dev, "SMBus base address "
|
|
"uninitialized - upgrade BIOS or use "
|
|
"force_addr=0xaddr\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
found:
|
|
if (!request_region(vt596_smba, 8, vt596_driver.name)) {
|
|
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
|
|
vt596_smba);
|
|
return -ENODEV;
|
|
}
|
|
|
|
pci_read_config_byte(pdev, SMBHSTCFG, &temp);
|
|
/* If force_addr is set, we program the new address here. Just to make
|
|
sure, we disable the VT596 first. */
|
|
if (force_addr) {
|
|
pci_write_config_byte(pdev, SMBHSTCFG, temp & 0xfe);
|
|
pci_write_config_word(pdev, id->driver_data, vt596_smba);
|
|
pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
|
|
dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
|
|
"address 0x%04x!\n", vt596_smba);
|
|
} else if (!(temp & 0x01)) {
|
|
if (force) {
|
|
/* NOTE: This assumes I/O space and other allocations
|
|
* WERE done by the Bios! Don't complain if your
|
|
* hardware does weird things after enabling this.
|
|
* :') Check for Bios updates before resorting to
|
|
* this.
|
|
*/
|
|
pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
|
|
dev_info(&pdev->dev, "Enabling SMBus device\n");
|
|
} else {
|
|
dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
|
|
"controller not enabled! - upgrade BIOS or "
|
|
"use force=1\n");
|
|
goto release_region;
|
|
}
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
|
|
|
|
switch (pdev->device) {
|
|
case PCI_DEVICE_ID_VIA_CX700:
|
|
case PCI_DEVICE_ID_VIA_8251:
|
|
case PCI_DEVICE_ID_VIA_8237:
|
|
case PCI_DEVICE_ID_VIA_8237A:
|
|
case PCI_DEVICE_ID_VIA_8235:
|
|
case PCI_DEVICE_ID_VIA_8233A:
|
|
case PCI_DEVICE_ID_VIA_8233_0:
|
|
vt596_features |= FEATURE_I2CBLOCK;
|
|
break;
|
|
case PCI_DEVICE_ID_VIA_82C686_4:
|
|
/* The VT82C686B (rev 0x40) does support I2C block
|
|
transactions, but the VT82C686A (rev 0x30) doesn't */
|
|
if (pdev->revision >= 0x40)
|
|
vt596_features |= FEATURE_I2CBLOCK;
|
|
break;
|
|
}
|
|
|
|
vt596_adapter.dev.parent = &pdev->dev;
|
|
snprintf(vt596_adapter.name, sizeof(vt596_adapter.name),
|
|
"SMBus Via Pro adapter at %04x", vt596_smba);
|
|
|
|
vt596_pdev = pci_dev_get(pdev);
|
|
if (i2c_add_adapter(&vt596_adapter)) {
|
|
pci_dev_put(vt596_pdev);
|
|
vt596_pdev = NULL;
|
|
}
|
|
|
|
/* Always return failure here. This is to allow other drivers to bind
|
|
* to this pci device. We don't really want to have control over the
|
|
* pci device, we only wanted to read as few register values from it.
|
|
*/
|
|
return -ENODEV;
|
|
|
|
release_region:
|
|
release_region(vt596_smba, 8);
|
|
return error;
|
|
}
|
|
|
|
static struct pci_device_id vt596_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3),
|
|
.driver_data = SMBBA1 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3),
|
|
.driver_data = SMBBA1 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4),
|
|
.driver_data = SMBBA1 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0),
|
|
.driver_data = SMBBA3 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A),
|
|
.driver_data = SMBBA3 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235),
|
|
.driver_data = SMBBA3 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237),
|
|
.driver_data = SMBBA3 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A),
|
|
.driver_data = SMBBA3 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4),
|
|
.driver_data = SMBBA1 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251),
|
|
.driver_data = SMBBA3 },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700),
|
|
.driver_data = SMBBA3 },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, vt596_ids);
|
|
|
|
static struct pci_driver vt596_driver = {
|
|
.name = "vt596_smbus",
|
|
.id_table = vt596_ids,
|
|
.probe = vt596_probe,
|
|
};
|
|
|
|
static int __init i2c_vt596_init(void)
|
|
{
|
|
return pci_register_driver(&vt596_driver);
|
|
}
|
|
|
|
|
|
static void __exit i2c_vt596_exit(void)
|
|
{
|
|
pci_unregister_driver(&vt596_driver);
|
|
if (vt596_pdev != NULL) {
|
|
i2c_del_adapter(&vt596_adapter);
|
|
release_region(vt596_smba, 8);
|
|
pci_dev_put(vt596_pdev);
|
|
vt596_pdev = NULL;
|
|
}
|
|
}
|
|
|
|
MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
|
|
"Mark D. Studebaker <mdsxyz123@yahoo.com> and "
|
|
"Jean Delvare <khali@linux-fr.org>");
|
|
MODULE_DESCRIPTION("vt82c596 SMBus driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(i2c_vt596_init);
|
|
module_exit(i2c_vt596_exit);
|