![Thomas Renninger](/assets/img/avatar_default.png)
Which makes the implementation independent from cpufreq drivers. Therefore this would also work on a Xen kernel where the hypervisor is doing frequency switching and idle entering. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
339 lines
9.2 KiB
C
339 lines
9.2 KiB
C
/*
|
|
* (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc.
|
|
*
|
|
* Licensed under the terms of the GNU GPL License version 2.
|
|
*/
|
|
|
|
#if defined(__i386__) || defined(__x86_64__)
|
|
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <limits.h>
|
|
|
|
#include <cpufreq.h>
|
|
|
|
#include "helpers/helpers.h"
|
|
#include "idle_monitor/cpupower-monitor.h"
|
|
|
|
#define MSR_APERF 0xE8
|
|
#define MSR_MPERF 0xE7
|
|
|
|
#define MSR_TSC 0x10
|
|
|
|
#define MSR_AMD_HWCR 0xc0010015
|
|
|
|
enum mperf_id { C0 = 0, Cx, AVG_FREQ, MPERF_CSTATE_COUNT };
|
|
|
|
static int mperf_get_count_percent(unsigned int self_id, double *percent,
|
|
unsigned int cpu);
|
|
static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
|
|
unsigned int cpu);
|
|
static struct timespec time_start, time_end;
|
|
|
|
static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = {
|
|
{
|
|
.name = "C0",
|
|
.desc = N_("Processor Core not idle"),
|
|
.id = C0,
|
|
.range = RANGE_THREAD,
|
|
.get_count_percent = mperf_get_count_percent,
|
|
},
|
|
{
|
|
.name = "Cx",
|
|
.desc = N_("Processor Core in an idle state"),
|
|
.id = Cx,
|
|
.range = RANGE_THREAD,
|
|
.get_count_percent = mperf_get_count_percent,
|
|
},
|
|
|
|
{
|
|
.name = "Freq",
|
|
.desc = N_("Average Frequency (including boost) in MHz"),
|
|
.id = AVG_FREQ,
|
|
.range = RANGE_THREAD,
|
|
.get_count = mperf_get_count_freq,
|
|
},
|
|
};
|
|
|
|
enum MAX_FREQ_MODE { MAX_FREQ_SYSFS, MAX_FREQ_TSC_REF };
|
|
static int max_freq_mode;
|
|
/*
|
|
* The max frequency mperf is ticking at (in C0), either retrieved via:
|
|
* 1) calculated after measurements if we know TSC ticks at mperf/P0 frequency
|
|
* 2) cpufreq /sys/devices/.../cpu0/cpufreq/cpuinfo_max_freq at init time
|
|
* 1. Is preferred as it also works without cpufreq subsystem (e.g. on Xen)
|
|
*/
|
|
static unsigned long max_frequency;
|
|
|
|
static unsigned long long tsc_at_measure_start;
|
|
static unsigned long long tsc_at_measure_end;
|
|
static unsigned long long *mperf_previous_count;
|
|
static unsigned long long *aperf_previous_count;
|
|
static unsigned long long *mperf_current_count;
|
|
static unsigned long long *aperf_current_count;
|
|
|
|
/* valid flag for all CPUs. If a MSR read failed it will be zero */
|
|
static int *is_valid;
|
|
|
|
static int mperf_get_tsc(unsigned long long *tsc)
|
|
{
|
|
int ret;
|
|
ret = read_msr(0, MSR_TSC, tsc);
|
|
if (ret)
|
|
dprint("Reading TSC MSR failed, returning %llu\n", *tsc);
|
|
return ret;
|
|
}
|
|
|
|
static int mperf_init_stats(unsigned int cpu)
|
|
{
|
|
unsigned long long val;
|
|
int ret;
|
|
|
|
ret = read_msr(cpu, MSR_APERF, &val);
|
|
aperf_previous_count[cpu] = val;
|
|
ret |= read_msr(cpu, MSR_MPERF, &val);
|
|
mperf_previous_count[cpu] = val;
|
|
is_valid[cpu] = !ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mperf_measure_stats(unsigned int cpu)
|
|
{
|
|
unsigned long long val;
|
|
int ret;
|
|
|
|
ret = read_msr(cpu, MSR_APERF, &val);
|
|
aperf_current_count[cpu] = val;
|
|
ret |= read_msr(cpu, MSR_MPERF, &val);
|
|
mperf_current_count[cpu] = val;
|
|
is_valid[cpu] = !ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mperf_get_count_percent(unsigned int id, double *percent,
|
|
unsigned int cpu)
|
|
{
|
|
unsigned long long aperf_diff, mperf_diff, tsc_diff;
|
|
unsigned long long timediff;
|
|
|
|
if (!is_valid[cpu])
|
|
return -1;
|
|
|
|
if (id != C0 && id != Cx)
|
|
return -1;
|
|
|
|
mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
|
|
aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
|
|
|
|
if (max_freq_mode == MAX_FREQ_TSC_REF) {
|
|
tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
|
|
*percent = 100.0 * mperf_diff / tsc_diff;
|
|
dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n",
|
|
mperf_cstates[id].name, mperf_diff, tsc_diff);
|
|
} else if (max_freq_mode == MAX_FREQ_SYSFS) {
|
|
timediff = timespec_diff_us(time_start, time_end);
|
|
*percent = 100.0 * mperf_diff / timediff;
|
|
dprint("%s: MAXFREQ - mperf_diff: %llu, time_diff: %llu\n",
|
|
mperf_cstates[id].name, mperf_diff, timediff);
|
|
} else
|
|
return -1;
|
|
|
|
if (id == Cx)
|
|
*percent = 100.0 - *percent;
|
|
|
|
dprint("%s: previous: %llu - current: %llu - (%u)\n",
|
|
mperf_cstates[id].name, mperf_diff, aperf_diff, cpu);
|
|
dprint("%s: %f\n", mperf_cstates[id].name, *percent);
|
|
return 0;
|
|
}
|
|
|
|
static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
|
|
unsigned int cpu)
|
|
{
|
|
unsigned long long aperf_diff, mperf_diff, time_diff, tsc_diff;
|
|
|
|
if (id != AVG_FREQ)
|
|
return 1;
|
|
|
|
if (!is_valid[cpu])
|
|
return -1;
|
|
|
|
mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
|
|
aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
|
|
|
|
if (max_freq_mode == MAX_FREQ_TSC_REF) {
|
|
/* Calculate max_freq from TSC count */
|
|
tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
|
|
time_diff = timespec_diff_us(time_start, time_end);
|
|
max_frequency = tsc_diff / time_diff;
|
|
}
|
|
|
|
*count = max_frequency * ((double)aperf_diff / mperf_diff);
|
|
dprint("%s: Average freq based on %s maximum frequency:\n",
|
|
mperf_cstates[id].name,
|
|
(max_freq_mode == MAX_FREQ_TSC_REF) ? "TSC calculated" : "sysfs read");
|
|
dprint("%max_frequency: %lu", max_frequency);
|
|
dprint("aperf_diff: %llu\n", aperf_diff);
|
|
dprint("mperf_diff: %llu\n", mperf_diff);
|
|
dprint("avg freq: %llu\n", *count);
|
|
return 0;
|
|
}
|
|
|
|
static int mperf_start(void)
|
|
{
|
|
int cpu;
|
|
unsigned long long dbg;
|
|
|
|
clock_gettime(CLOCK_REALTIME, &time_start);
|
|
mperf_get_tsc(&tsc_at_measure_start);
|
|
|
|
for (cpu = 0; cpu < cpu_count; cpu++)
|
|
mperf_init_stats(cpu);
|
|
|
|
mperf_get_tsc(&dbg);
|
|
dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start);
|
|
return 0;
|
|
}
|
|
|
|
static int mperf_stop(void)
|
|
{
|
|
unsigned long long dbg;
|
|
int cpu;
|
|
|
|
for (cpu = 0; cpu < cpu_count; cpu++)
|
|
mperf_measure_stats(cpu);
|
|
|
|
mperf_get_tsc(&tsc_at_measure_end);
|
|
clock_gettime(CLOCK_REALTIME, &time_end);
|
|
|
|
mperf_get_tsc(&dbg);
|
|
dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Mperf register is defined to tick at P0 (maximum) frequency
|
|
*
|
|
* Instead of reading out P0 which can be tricky to read out from HW,
|
|
* we use TSC counter if it reliably ticks at P0/mperf frequency.
|
|
*
|
|
* Still try to fall back to:
|
|
* /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
|
|
* on older Intel HW without invariant TSC feature.
|
|
* Or on AMD machines where TSC does not tick at P0 (do not exist yet, but
|
|
* it's still double checked (MSR_AMD_HWCR)).
|
|
*
|
|
* On these machines the user would still get useful mperf
|
|
* stats when acpi-cpufreq driver is loaded.
|
|
*/
|
|
static int init_maxfreq_mode(void)
|
|
{
|
|
int ret;
|
|
unsigned long long hwcr;
|
|
unsigned long min;
|
|
|
|
if (!cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC)
|
|
goto use_sysfs;
|
|
|
|
if (cpupower_cpu_info.vendor == X86_VENDOR_AMD) {
|
|
/* MSR_AMD_HWCR tells us whether TSC runs at P0/mperf
|
|
* freq.
|
|
* A test whether hwcr is accessable/available would be:
|
|
* (cpupower_cpu_info.family > 0x10 ||
|
|
* cpupower_cpu_info.family == 0x10 &&
|
|
* cpupower_cpu_info.model >= 0x2))
|
|
* This should be the case for all aperf/mperf
|
|
* capable AMD machines and is therefore safe to test here.
|
|
* Compare with Linus kernel git commit: acf01734b1747b1ec4
|
|
*/
|
|
ret = read_msr(0, MSR_AMD_HWCR, &hwcr);
|
|
/*
|
|
* If the MSR read failed, assume a Xen system that did
|
|
* not explicitly provide access to it and assume TSC works
|
|
*/
|
|
if (ret != 0) {
|
|
dprint("TSC read 0x%x failed - assume TSC working\n",
|
|
MSR_AMD_HWCR);
|
|
return 0;
|
|
} else if (1 & (hwcr >> 24)) {
|
|
max_freq_mode = MAX_FREQ_TSC_REF;
|
|
return 0;
|
|
} else { /* Use sysfs max frequency if available */ }
|
|
} else if (cpupower_cpu_info.vendor == X86_VENDOR_INTEL) {
|
|
/*
|
|
* On Intel we assume mperf (in C0) is ticking at same
|
|
* rate than TSC
|
|
*/
|
|
max_freq_mode = MAX_FREQ_TSC_REF;
|
|
return 0;
|
|
}
|
|
use_sysfs:
|
|
if (cpufreq_get_hardware_limits(0, &min, &max_frequency)) {
|
|
dprint("Cannot retrieve max freq from cpufreq kernel "
|
|
"subsystem\n");
|
|
return -1;
|
|
}
|
|
max_freq_mode = MAX_FREQ_SYSFS;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This monitor provides:
|
|
*
|
|
* 1) Average frequency a CPU resided in
|
|
* This always works if the CPU has aperf/mperf capabilities
|
|
*
|
|
* 2) C0 and Cx (any sleep state) time a CPU resided in
|
|
* Works if mperf timer stops ticking in sleep states which
|
|
* seem to be the case on all current HW.
|
|
* Both is directly retrieved from HW registers and is independent
|
|
* from kernel statistics.
|
|
*/
|
|
struct cpuidle_monitor mperf_monitor;
|
|
struct cpuidle_monitor *mperf_register(void)
|
|
{
|
|
if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF))
|
|
return NULL;
|
|
|
|
if (init_maxfreq_mode())
|
|
return NULL;
|
|
|
|
/* Free this at program termination */
|
|
is_valid = calloc(cpu_count, sizeof(int));
|
|
mperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));
|
|
aperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));
|
|
mperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
|
|
aperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
|
|
|
|
mperf_monitor.name_len = strlen(mperf_monitor.name);
|
|
return &mperf_monitor;
|
|
}
|
|
|
|
void mperf_unregister(void)
|
|
{
|
|
free(mperf_previous_count);
|
|
free(aperf_previous_count);
|
|
free(mperf_current_count);
|
|
free(aperf_current_count);
|
|
free(is_valid);
|
|
}
|
|
|
|
struct cpuidle_monitor mperf_monitor = {
|
|
.name = "Mperf",
|
|
.hw_states_num = MPERF_CSTATE_COUNT,
|
|
.hw_states = mperf_cstates,
|
|
.start = mperf_start,
|
|
.stop = mperf_stop,
|
|
.do_register = mperf_register,
|
|
.unregister = mperf_unregister,
|
|
.needs_root = 1,
|
|
.overflow_s = 922000000 /* 922337203 seconds TSC overflow
|
|
at 20GHz */
|
|
};
|
|
#endif /* #if defined(__i386__) || defined(__x86_64__) */
|