![Nishanth Aravamudan](/assets/img/avatar_default.png)
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: "Moore, Eric Dean" <Eric.Moore@lsil.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
5609 lines
152 KiB
C
5609 lines
152 KiB
C
/*
|
|
* linux/drivers/message/fusion/mptscsih.c
|
|
* For use with LSI Logic PCI chip/adapter(s)
|
|
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
|
|
*
|
|
* Copyright (c) 1999-2005 LSI Logic Corporation
|
|
* (mailto:mpt_linux_developer@lsil.com)
|
|
*
|
|
*/
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; version 2 of the License.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
NO WARRANTY
|
|
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
|
|
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
|
|
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
|
|
solely responsible for determining the appropriateness of using and
|
|
distributing the Program and assumes all risks associated with its
|
|
exercise of rights under this Agreement, including but not limited to
|
|
the risks and costs of program errors, damage to or loss of data,
|
|
programs or equipment, and unavailability or interruption of operations.
|
|
|
|
DISCLAIMER OF LIABILITY
|
|
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
|
|
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
|
|
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
|
|
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
|
|
#include "linux_compat.h" /* linux-2.6 tweaks */
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h> /* for mdelay */
|
|
#include <linux/interrupt.h> /* needed for in_interrupt() proto */
|
|
#include <linux/reboot.h> /* notifier code */
|
|
#include <linux/sched.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include <scsi/scsi_dbg.h>
|
|
|
|
#include "mptbase.h"
|
|
#include "mptscsih.h"
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
#define my_NAME "Fusion MPT SCSI Host driver"
|
|
#define my_VERSION MPT_LINUX_VERSION_COMMON
|
|
#define MYNAM "mptscsih"
|
|
|
|
MODULE_AUTHOR(MODULEAUTHOR);
|
|
MODULE_DESCRIPTION(my_NAME);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
|
|
typedef struct _BIG_SENSE_BUF {
|
|
u8 data[MPT_SENSE_BUFFER_ALLOC];
|
|
} BIG_SENSE_BUF;
|
|
|
|
#define MPT_SCANDV_GOOD (0x00000000) /* must be 0 */
|
|
#define MPT_SCANDV_DID_RESET (0x00000001)
|
|
#define MPT_SCANDV_SENSE (0x00000002)
|
|
#define MPT_SCANDV_SOME_ERROR (0x00000004)
|
|
#define MPT_SCANDV_SELECTION_TIMEOUT (0x00000008)
|
|
#define MPT_SCANDV_ISSUE_SENSE (0x00000010)
|
|
#define MPT_SCANDV_FALLBACK (0x00000020)
|
|
|
|
#define MPT_SCANDV_MAX_RETRIES (10)
|
|
|
|
#define MPT_ICFLAG_BUF_CAP 0x01 /* ReadBuffer Read Capacity format */
|
|
#define MPT_ICFLAG_ECHO 0x02 /* ReadBuffer Echo buffer format */
|
|
#define MPT_ICFLAG_EBOS 0x04 /* ReadBuffer Echo buffer has EBOS */
|
|
#define MPT_ICFLAG_PHYS_DISK 0x08 /* Any SCSI IO but do Phys Disk Format */
|
|
#define MPT_ICFLAG_TAGGED_CMD 0x10 /* Do tagged IO */
|
|
#define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occurred with this command */
|
|
#define MPT_ICFLAG_RESERVED 0x40 /* Reserved has been issued */
|
|
|
|
typedef struct _internal_cmd {
|
|
char *data; /* data pointer */
|
|
dma_addr_t data_dma; /* data dma address */
|
|
int size; /* transfer size */
|
|
u8 cmd; /* SCSI Op Code */
|
|
u8 bus; /* bus number */
|
|
u8 id; /* SCSI ID (virtual) */
|
|
u8 lun;
|
|
u8 flags; /* Bit Field - See above */
|
|
u8 physDiskNum; /* Phys disk number, -1 else */
|
|
u8 rsvd2;
|
|
u8 rsvd;
|
|
} INTERNAL_CMD;
|
|
|
|
typedef struct _negoparms {
|
|
u8 width;
|
|
u8 offset;
|
|
u8 factor;
|
|
u8 flags;
|
|
} NEGOPARMS;
|
|
|
|
typedef struct _dv_parameters {
|
|
NEGOPARMS max;
|
|
NEGOPARMS now;
|
|
u8 cmd;
|
|
u8 id;
|
|
u16 pad1;
|
|
} DVPARAMETERS;
|
|
|
|
/*
|
|
* Other private/forward protos...
|
|
*/
|
|
int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
|
|
static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
|
|
int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
|
|
|
|
static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
|
|
SCSIIORequest_t *pReq, int req_idx);
|
|
static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
|
|
static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
|
|
static int mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
|
|
static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
|
|
static u32 SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc);
|
|
|
|
static int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
|
|
static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
|
|
|
|
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
|
|
int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
|
|
|
|
static void mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen);
|
|
static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56);
|
|
static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq);
|
|
static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags);
|
|
static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id);
|
|
static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags);
|
|
static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus);
|
|
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
|
|
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
|
|
static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum);
|
|
|
|
static struct work_struct mptscsih_persistTask;
|
|
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
|
|
static void mptscsih_domainValidation(void *hd);
|
|
static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
|
|
static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id);
|
|
static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target);
|
|
static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage);
|
|
static void mptscsih_fillbuf(char *buffer, int size, int index, int width);
|
|
static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id);
|
|
#endif
|
|
|
|
void mptscsih_remove(struct pci_dev *);
|
|
void mptscsih_shutdown(struct pci_dev *);
|
|
#ifdef CONFIG_PM
|
|
int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
|
|
int mptscsih_resume(struct pci_dev *pdev);
|
|
#endif
|
|
|
|
#define SNS_LEN(scp) sizeof((scp)->sense_buffer)
|
|
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
/*
|
|
* Domain Validation task structure
|
|
*/
|
|
static DEFINE_SPINLOCK(dvtaskQ_lock);
|
|
static int dvtaskQ_active = 0;
|
|
static int dvtaskQ_release = 0;
|
|
static struct work_struct dvTaskQ_task;
|
|
#endif
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_add_sge - Place a simple SGE at address pAddr.
|
|
* @pAddr: virtual address for SGE
|
|
* @flagslength: SGE flags and data transfer length
|
|
* @dma_addr: Physical address
|
|
*
|
|
* This routine places a MPT request frame back on the MPT adapter's
|
|
* FreeQ.
|
|
*/
|
|
static inline void
|
|
mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
|
|
{
|
|
if (sizeof(dma_addr_t) == sizeof(u64)) {
|
|
SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
|
|
u32 tmp = dma_addr & 0xFFFFFFFF;
|
|
|
|
pSge->FlagsLength = cpu_to_le32(flagslength);
|
|
pSge->Address.Low = cpu_to_le32(tmp);
|
|
tmp = (u32) ((u64)dma_addr >> 32);
|
|
pSge->Address.High = cpu_to_le32(tmp);
|
|
|
|
} else {
|
|
SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
|
|
pSge->FlagsLength = cpu_to_le32(flagslength);
|
|
pSge->Address = cpu_to_le32(dma_addr);
|
|
}
|
|
} /* mptscsih_add_sge() */
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_add_chain - Place a chain SGE at address pAddr.
|
|
* @pAddr: virtual address for SGE
|
|
* @next: nextChainOffset value (u32's)
|
|
* @length: length of next SGL segment
|
|
* @dma_addr: Physical address
|
|
*
|
|
* This routine places a MPT request frame back on the MPT adapter's
|
|
* FreeQ.
|
|
*/
|
|
static inline void
|
|
mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
|
|
{
|
|
if (sizeof(dma_addr_t) == sizeof(u64)) {
|
|
SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
|
|
u32 tmp = dma_addr & 0xFFFFFFFF;
|
|
|
|
pChain->Length = cpu_to_le16(length);
|
|
pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
|
|
|
|
pChain->NextChainOffset = next;
|
|
|
|
pChain->Address.Low = cpu_to_le32(tmp);
|
|
tmp = (u32) ((u64)dma_addr >> 32);
|
|
pChain->Address.High = cpu_to_le32(tmp);
|
|
} else {
|
|
SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
|
|
pChain->Length = cpu_to_le16(length);
|
|
pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
|
|
pChain->NextChainOffset = next;
|
|
pChain->Address = cpu_to_le32(dma_addr);
|
|
}
|
|
} /* mptscsih_add_chain() */
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_getFreeChainBuffer - Function to get a free chain
|
|
* from the MPT_SCSI_HOST FreeChainQ.
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @req_idx: Index of the SCSI IO request frame. (output)
|
|
*
|
|
* return SUCCESS or FAILED
|
|
*/
|
|
static inline int
|
|
mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
|
|
{
|
|
MPT_FRAME_HDR *chainBuf;
|
|
unsigned long flags;
|
|
int rc;
|
|
int chain_idx;
|
|
|
|
dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer called\n",
|
|
ioc->name));
|
|
spin_lock_irqsave(&ioc->FreeQlock, flags);
|
|
if (!list_empty(&ioc->FreeChainQ)) {
|
|
int offset;
|
|
|
|
chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR,
|
|
u.frame.linkage.list);
|
|
list_del(&chainBuf->u.frame.linkage.list);
|
|
offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
|
|
chain_idx = offset / ioc->req_sz;
|
|
rc = SUCCESS;
|
|
dsgprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
|
|
ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
|
|
} else {
|
|
rc = FAILED;
|
|
chain_idx = MPT_HOST_NO_CHAIN;
|
|
dfailprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer failed\n",
|
|
ioc->name));
|
|
}
|
|
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
|
|
|
|
*retIndex = chain_idx;
|
|
return rc;
|
|
} /* mptscsih_getFreeChainBuffer() */
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_AddSGE - Add a SGE (plus chain buffers) to the
|
|
* SCSIIORequest_t Message Frame.
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @SCpnt: Pointer to scsi_cmnd structure
|
|
* @pReq: Pointer to SCSIIORequest_t structure
|
|
*
|
|
* Returns ...
|
|
*/
|
|
static int
|
|
mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
|
|
SCSIIORequest_t *pReq, int req_idx)
|
|
{
|
|
char *psge;
|
|
char *chainSge;
|
|
struct scatterlist *sg;
|
|
int frm_sz;
|
|
int sges_left, sg_done;
|
|
int chain_idx = MPT_HOST_NO_CHAIN;
|
|
int sgeOffset;
|
|
int numSgeSlots, numSgeThisFrame;
|
|
u32 sgflags, sgdir, thisxfer = 0;
|
|
int chain_dma_off = 0;
|
|
int newIndex;
|
|
int ii;
|
|
dma_addr_t v2;
|
|
u32 RequestNB;
|
|
|
|
sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK;
|
|
if (sgdir == MPI_SCSIIO_CONTROL_WRITE) {
|
|
sgdir = MPT_TRANSFER_HOST_TO_IOC;
|
|
} else {
|
|
sgdir = MPT_TRANSFER_IOC_TO_HOST;
|
|
}
|
|
|
|
psge = (char *) &pReq->SGL;
|
|
frm_sz = ioc->req_sz;
|
|
|
|
/* Map the data portion, if any.
|
|
* sges_left = 0 if no data transfer.
|
|
*/
|
|
if ( (sges_left = SCpnt->use_sg) ) {
|
|
sges_left = pci_map_sg(ioc->pcidev,
|
|
(struct scatterlist *) SCpnt->request_buffer,
|
|
SCpnt->use_sg,
|
|
SCpnt->sc_data_direction);
|
|
if (sges_left == 0)
|
|
return FAILED;
|
|
} else if (SCpnt->request_bufflen) {
|
|
SCpnt->SCp.dma_handle = pci_map_single(ioc->pcidev,
|
|
SCpnt->request_buffer,
|
|
SCpnt->request_bufflen,
|
|
SCpnt->sc_data_direction);
|
|
dsgprintk((MYIOC_s_INFO_FMT "SG: non-SG for %p, len=%d\n",
|
|
ioc->name, SCpnt, SCpnt->request_bufflen));
|
|
mptscsih_add_sge((char *) &pReq->SGL,
|
|
0xD1000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|SCpnt->request_bufflen,
|
|
SCpnt->SCp.dma_handle);
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
/* Handle the SG case.
|
|
*/
|
|
sg = (struct scatterlist *) SCpnt->request_buffer;
|
|
sg_done = 0;
|
|
sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
|
|
chainSge = NULL;
|
|
|
|
/* Prior to entering this loop - the following must be set
|
|
* current MF: sgeOffset (bytes)
|
|
* chainSge (Null if original MF is not a chain buffer)
|
|
* sg_done (num SGE done for this MF)
|
|
*/
|
|
|
|
nextSGEset:
|
|
numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
|
|
numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
|
|
|
|
sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;
|
|
|
|
/* Get first (num - 1) SG elements
|
|
* Skip any SG entries with a length of 0
|
|
* NOTE: at finish, sg and psge pointed to NEXT data/location positions
|
|
*/
|
|
for (ii=0; ii < (numSgeThisFrame-1); ii++) {
|
|
thisxfer = sg_dma_len(sg);
|
|
if (thisxfer == 0) {
|
|
sg ++; /* Get next SG element from the OS */
|
|
sg_done++;
|
|
continue;
|
|
}
|
|
|
|
v2 = sg_dma_address(sg);
|
|
mptscsih_add_sge(psge, sgflags | thisxfer, v2);
|
|
|
|
sg++; /* Get next SG element from the OS */
|
|
psge += (sizeof(u32) + sizeof(dma_addr_t));
|
|
sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
|
|
sg_done++;
|
|
}
|
|
|
|
if (numSgeThisFrame == sges_left) {
|
|
/* Add last element, end of buffer and end of list flags.
|
|
*/
|
|
sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT |
|
|
MPT_SGE_FLAGS_END_OF_BUFFER |
|
|
MPT_SGE_FLAGS_END_OF_LIST;
|
|
|
|
/* Add last SGE and set termination flags.
|
|
* Note: Last SGE may have a length of 0 - which should be ok.
|
|
*/
|
|
thisxfer = sg_dma_len(sg);
|
|
|
|
v2 = sg_dma_address(sg);
|
|
mptscsih_add_sge(psge, sgflags | thisxfer, v2);
|
|
/*
|
|
sg++;
|
|
psge += (sizeof(u32) + sizeof(dma_addr_t));
|
|
*/
|
|
sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
|
|
sg_done++;
|
|
|
|
if (chainSge) {
|
|
/* The current buffer is a chain buffer,
|
|
* but there is not another one.
|
|
* Update the chain element
|
|
* Offset and Length fields.
|
|
*/
|
|
mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
|
|
} else {
|
|
/* The current buffer is the original MF
|
|
* and there is no Chain buffer.
|
|
*/
|
|
pReq->ChainOffset = 0;
|
|
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
|
|
dsgprintk((MYIOC_s_INFO_FMT
|
|
"Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
|
|
ioc->RequestNB[req_idx] = RequestNB;
|
|
}
|
|
} else {
|
|
/* At least one chain buffer is needed.
|
|
* Complete the first MF
|
|
* - last SGE element, set the LastElement bit
|
|
* - set ChainOffset (words) for orig MF
|
|
* (OR finish previous MF chain buffer)
|
|
* - update MFStructPtr ChainIndex
|
|
* - Populate chain element
|
|
* Also
|
|
* Loop until done.
|
|
*/
|
|
|
|
dsgprintk((MYIOC_s_INFO_FMT "SG: Chain Required! sg done %d\n",
|
|
ioc->name, sg_done));
|
|
|
|
/* Set LAST_ELEMENT flag for last non-chain element
|
|
* in the buffer. Since psge points at the NEXT
|
|
* SGE element, go back one SGE element, update the flags
|
|
* and reset the pointer. (Note: sgflags & thisxfer are already
|
|
* set properly).
|
|
*/
|
|
if (sg_done) {
|
|
u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
|
|
sgflags = le32_to_cpu(*ptmp);
|
|
sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
|
|
*ptmp = cpu_to_le32(sgflags);
|
|
}
|
|
|
|
if (chainSge) {
|
|
/* The current buffer is a chain buffer.
|
|
* chainSge points to the previous Chain Element.
|
|
* Update its chain element Offset and Length (must
|
|
* include chain element size) fields.
|
|
* Old chain element is now complete.
|
|
*/
|
|
u8 nextChain = (u8) (sgeOffset >> 2);
|
|
sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
|
|
mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
|
|
} else {
|
|
/* The original MF buffer requires a chain buffer -
|
|
* set the offset.
|
|
* Last element in this MF is a chain element.
|
|
*/
|
|
pReq->ChainOffset = (u8) (sgeOffset >> 2);
|
|
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
|
|
dsgprintk((MYIOC_s_ERR_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
|
|
ioc->RequestNB[req_idx] = RequestNB;
|
|
}
|
|
|
|
sges_left -= sg_done;
|
|
|
|
|
|
/* NOTE: psge points to the beginning of the chain element
|
|
* in current buffer. Get a chain buffer.
|
|
*/
|
|
if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
|
|
dfailprintk((MYIOC_s_INFO_FMT
|
|
"getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
|
|
ioc->name, pReq->CDB[0], SCpnt));
|
|
return FAILED;
|
|
}
|
|
|
|
/* Update the tracking arrays.
|
|
* If chainSge == NULL, update ReqToChain, else ChainToChain
|
|
*/
|
|
if (chainSge) {
|
|
ioc->ChainToChain[chain_idx] = newIndex;
|
|
} else {
|
|
ioc->ReqToChain[req_idx] = newIndex;
|
|
}
|
|
chain_idx = newIndex;
|
|
chain_dma_off = ioc->req_sz * chain_idx;
|
|
|
|
/* Populate the chainSGE for the current buffer.
|
|
* - Set chain buffer pointer to psge and fill
|
|
* out the Address and Flags fields.
|
|
*/
|
|
chainSge = (char *) psge;
|
|
dsgprintk((KERN_INFO " Current buff @ %p (index 0x%x)",
|
|
psge, req_idx));
|
|
|
|
/* Start the SGE for the next buffer
|
|
*/
|
|
psge = (char *) (ioc->ChainBuffer + chain_dma_off);
|
|
sgeOffset = 0;
|
|
sg_done = 0;
|
|
|
|
dsgprintk((KERN_INFO " Chain buff @ %p (index 0x%x)\n",
|
|
psge, chain_idx));
|
|
|
|
/* Start the SGE for the next buffer
|
|
*/
|
|
|
|
goto nextSGEset;
|
|
}
|
|
|
|
return SUCCESS;
|
|
} /* mptscsih_AddSGE() */
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_io_done - Main SCSI IO callback routine registered to
|
|
* Fusion MPT (base) driver
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @mf: Pointer to original MPT request frame
|
|
* @r: Pointer to MPT reply frame (NULL if TurboReply)
|
|
*
|
|
* This routine is called from mpt.c::mpt_interrupt() at the completion
|
|
* of any SCSI IO request.
|
|
* This routine is registered with the Fusion MPT (base) driver at driver
|
|
* load/init time via the mpt_register() API call.
|
|
*
|
|
* Returns 1 indicating alloc'd request frame ptr should be freed.
|
|
*/
|
|
int
|
|
mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
|
|
{
|
|
struct scsi_cmnd *sc;
|
|
MPT_SCSI_HOST *hd;
|
|
SCSIIORequest_t *pScsiReq;
|
|
SCSIIOReply_t *pScsiReply;
|
|
u16 req_idx;
|
|
|
|
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
|
|
|
|
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
sc = hd->ScsiLookup[req_idx];
|
|
if (sc == NULL) {
|
|
MPIHeader_t *hdr = (MPIHeader_t *)mf;
|
|
|
|
/* Remark: writeSDP1 will use the ScsiDoneCtx
|
|
* If a SCSI I/O cmd, device disabled by OS and
|
|
* completion done. Cannot touch sc struct. Just free mem.
|
|
*/
|
|
if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST)
|
|
printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
|
|
ioc->name);
|
|
|
|
mptscsih_freeChainBuffers(ioc, req_idx);
|
|
return 1;
|
|
}
|
|
|
|
sc->result = DID_OK << 16; /* Set default reply as OK */
|
|
pScsiReq = (SCSIIORequest_t *) mf;
|
|
pScsiReply = (SCSIIOReply_t *) mr;
|
|
|
|
if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
|
|
dmfprintk((MYIOC_s_INFO_FMT
|
|
"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
|
|
ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
|
|
}else{
|
|
dmfprintk((MYIOC_s_INFO_FMT
|
|
"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
|
|
ioc->name, mf, mr, sc, req_idx));
|
|
}
|
|
|
|
if (pScsiReply == NULL) {
|
|
/* special context reply handling */
|
|
;
|
|
} else {
|
|
u32 xfer_cnt;
|
|
u16 status;
|
|
u8 scsi_state, scsi_status;
|
|
|
|
status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
|
|
scsi_state = pScsiReply->SCSIState;
|
|
scsi_status = pScsiReply->SCSIStatus;
|
|
xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
|
|
sc->resid = sc->request_bufflen - xfer_cnt;
|
|
|
|
/*
|
|
* if we get a data underrun indication, yet no data was
|
|
* transferred and the SCSI status indicates that the
|
|
* command was never started, change the data underrun
|
|
* to success
|
|
*/
|
|
if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
|
|
(scsi_status == MPI_SCSI_STATUS_BUSY ||
|
|
scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
|
|
scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
|
|
status = MPI_IOCSTATUS_SUCCESS;
|
|
}
|
|
|
|
dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n"
|
|
"IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n"
|
|
"resid=%d bufflen=%d xfer_cnt=%d\n",
|
|
ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1],
|
|
status, scsi_state, scsi_status, sc->resid,
|
|
sc->request_bufflen, xfer_cnt));
|
|
|
|
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
|
|
mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
|
|
|
|
/*
|
|
* Look for + dump FCP ResponseInfo[]!
|
|
*/
|
|
if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
|
|
pScsiReply->ResponseInfo) {
|
|
printk(KERN_NOTICE "ha=%d id=%d lun=%d: "
|
|
"FCP_ResponseInfo=%08xh\n",
|
|
ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1],
|
|
le32_to_cpu(pScsiReply->ResponseInfo));
|
|
}
|
|
|
|
switch(status) {
|
|
case MPI_IOCSTATUS_BUSY: /* 0x0002 */
|
|
/* CHECKME!
|
|
* Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
|
|
* But not: DID_BUS_BUSY lest one risk
|
|
* killing interrupt handler:-(
|
|
*/
|
|
sc->result = SAM_STAT_BUSY;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
|
|
case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
|
|
sc->result = DID_BAD_TARGET << 16;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
|
|
/* Spoof to SCSI Selection Timeout! */
|
|
sc->result = DID_NO_CONNECT << 16;
|
|
|
|
if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
|
|
hd->sel_timeout[pScsiReq->TargetID]++;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
|
|
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
|
|
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
|
|
/* Linux handles an unsolicited DID_RESET better
|
|
* than an unsolicited DID_ABORT.
|
|
*/
|
|
sc->result = DID_RESET << 16;
|
|
|
|
/* GEM Workaround. */
|
|
if (ioc->bus_type == SCSI)
|
|
mptscsih_no_negotiate(hd, sc->device->id);
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
|
|
sc->resid = sc->request_bufflen - xfer_cnt;
|
|
if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
|
|
sc->result=DID_SOFT_ERROR << 16;
|
|
else /* Sufficient data transfer occurred */
|
|
sc->result = (DID_OK << 16) | scsi_status;
|
|
dreplyprintk((KERN_NOTICE
|
|
"RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->device->id));
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
|
|
/*
|
|
* Do upfront check for valid SenseData and give it
|
|
* precedence!
|
|
*/
|
|
sc->result = (DID_OK << 16) | scsi_status;
|
|
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
|
|
/* Have already saved the status and sense data
|
|
*/
|
|
;
|
|
} else {
|
|
if (xfer_cnt < sc->underflow) {
|
|
if (scsi_status == SAM_STAT_BUSY)
|
|
sc->result = SAM_STAT_BUSY;
|
|
else
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
}
|
|
if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
|
|
/* What to do?
|
|
*/
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
}
|
|
else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
|
|
/* Not real sure here either... */
|
|
sc->result = DID_RESET << 16;
|
|
}
|
|
}
|
|
|
|
dreplyprintk((KERN_NOTICE " sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
|
|
sc->underflow));
|
|
dreplyprintk((KERN_NOTICE " ActBytesXferd=%02xh\n", xfer_cnt));
|
|
/* Report Queue Full
|
|
*/
|
|
if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
|
|
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
|
|
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
|
|
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
|
|
if (scsi_status == MPI_SCSI_STATUS_BUSY)
|
|
sc->result = (DID_BUS_BUSY << 16) | scsi_status;
|
|
else
|
|
sc->result = (DID_OK << 16) | scsi_status;
|
|
if (scsi_state == 0) {
|
|
;
|
|
} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
|
|
/*
|
|
* If running against circa 200003dd 909 MPT f/w,
|
|
* may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
|
|
* (QUEUE_FULL) returned from device! --> get 0x0000?128
|
|
* and with SenseBytes set to 0.
|
|
*/
|
|
if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL)
|
|
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
|
|
|
|
}
|
|
else if (scsi_state &
|
|
(MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
|
|
) {
|
|
/*
|
|
* What to do?
|
|
*/
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
}
|
|
else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
|
|
/* Not real sure here either... */
|
|
sc->result = DID_RESET << 16;
|
|
}
|
|
else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
|
|
/* Device Inq. data indicates that it supports
|
|
* QTags, but rejects QTag messages.
|
|
* This command completed OK.
|
|
*
|
|
* Not real sure here either so do nothing... */
|
|
}
|
|
|
|
if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
|
|
mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
|
|
|
|
/* Add handling of:
|
|
* Reservation Conflict, Busy,
|
|
* Command Terminated, CHECK
|
|
*/
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
|
|
case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
|
|
case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
|
|
case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
|
|
case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
|
|
case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
|
|
case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
|
|
case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
|
|
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
|
|
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
|
|
default:
|
|
/*
|
|
* What to do?
|
|
*/
|
|
sc->result = DID_SOFT_ERROR << 16;
|
|
break;
|
|
|
|
} /* switch(status) */
|
|
|
|
dreplyprintk((KERN_NOTICE " sc->result is %08xh\n", sc->result));
|
|
} /* end of address reply case */
|
|
|
|
/* Unmap the DMA buffers, if any. */
|
|
if (sc->use_sg) {
|
|
pci_unmap_sg(ioc->pcidev, (struct scatterlist *) sc->request_buffer,
|
|
sc->use_sg, sc->sc_data_direction);
|
|
} else if (sc->request_bufflen) {
|
|
pci_unmap_single(ioc->pcidev, sc->SCp.dma_handle,
|
|
sc->request_bufflen, sc->sc_data_direction);
|
|
}
|
|
|
|
hd->ScsiLookup[req_idx] = NULL;
|
|
|
|
sc->scsi_done(sc); /* Issue the command callback */
|
|
|
|
/* Free Chain buffers */
|
|
mptscsih_freeChainBuffers(ioc, req_idx);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* mptscsih_flush_running_cmds - For each command found, search
|
|
* Scsi_Host instance taskQ and reply to OS.
|
|
* Called only if recovering from a FW reload.
|
|
* @hd: Pointer to a SCSI HOST structure
|
|
*
|
|
* Returns: None.
|
|
*
|
|
* Must be called while new I/Os are being queued.
|
|
*/
|
|
static void
|
|
mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
|
|
{
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
struct scsi_cmnd *SCpnt;
|
|
MPT_FRAME_HDR *mf;
|
|
int ii;
|
|
int max = ioc->req_depth;
|
|
|
|
dprintk((KERN_INFO MYNAM ": flush_ScsiLookup called\n"));
|
|
for (ii= 0; ii < max; ii++) {
|
|
if ((SCpnt = hd->ScsiLookup[ii]) != NULL) {
|
|
|
|
/* Command found.
|
|
*/
|
|
|
|
/* Null ScsiLookup index
|
|
*/
|
|
hd->ScsiLookup[ii] = NULL;
|
|
|
|
mf = MPT_INDEX_2_MFPTR(ioc, ii);
|
|
dmfprintk(( "flush: ScsiDone (mf=%p,sc=%p)\n",
|
|
mf, SCpnt));
|
|
|
|
/* Set status, free OS resources (SG DMA buffers)
|
|
* Do OS callback
|
|
* Free driver resources (chain, msg buffers)
|
|
*/
|
|
if (SCpnt->use_sg) {
|
|
pci_unmap_sg(ioc->pcidev,
|
|
(struct scatterlist *) SCpnt->request_buffer,
|
|
SCpnt->use_sg,
|
|
SCpnt->sc_data_direction);
|
|
} else if (SCpnt->request_bufflen) {
|
|
pci_unmap_single(ioc->pcidev,
|
|
SCpnt->SCp.dma_handle,
|
|
SCpnt->request_bufflen,
|
|
SCpnt->sc_data_direction);
|
|
}
|
|
SCpnt->result = DID_RESET << 16;
|
|
SCpnt->host_scribble = NULL;
|
|
|
|
/* Free Chain buffers */
|
|
mptscsih_freeChainBuffers(ioc, ii);
|
|
|
|
/* Free Message frames */
|
|
mpt_free_msg_frame(ioc, mf);
|
|
|
|
SCpnt->scsi_done(SCpnt); /* Issue the command callback */
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* mptscsih_search_running_cmds - Delete any commands associated
|
|
* with the specified target and lun. Function called only
|
|
* when a lun is disable by mid-layer.
|
|
* Do NOT access the referenced scsi_cmnd structure or
|
|
* members. Will cause either a paging or NULL ptr error.
|
|
* @hd: Pointer to a SCSI HOST structure
|
|
* @target: target id
|
|
* @lun: lun
|
|
*
|
|
* Returns: None.
|
|
*
|
|
* Called from slave_destroy.
|
|
*/
|
|
static void
|
|
mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun)
|
|
{
|
|
SCSIIORequest_t *mf = NULL;
|
|
int ii;
|
|
int max = hd->ioc->req_depth;
|
|
struct scsi_cmnd *sc;
|
|
|
|
dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n",
|
|
target, lun, max));
|
|
|
|
for (ii=0; ii < max; ii++) {
|
|
if ((sc = hd->ScsiLookup[ii]) != NULL) {
|
|
|
|
mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii);
|
|
|
|
dsprintk(( "search_running: found (sc=%p, mf = %p) target %d, lun %d \n",
|
|
hd->ScsiLookup[ii], mf, mf->TargetID, mf->LUN[1]));
|
|
|
|
if ((mf->TargetID != ((u8)target)) || (mf->LUN[1] != ((u8) lun)))
|
|
continue;
|
|
|
|
/* Cleanup
|
|
*/
|
|
hd->ScsiLookup[ii] = NULL;
|
|
mptscsih_freeChainBuffers(hd->ioc, ii);
|
|
mpt_free_msg_frame(hd->ioc, (MPT_FRAME_HDR *)mf);
|
|
if (sc->use_sg) {
|
|
pci_unmap_sg(hd->ioc->pcidev,
|
|
(struct scatterlist *) sc->request_buffer,
|
|
sc->use_sg,
|
|
sc->sc_data_direction);
|
|
} else if (sc->request_bufflen) {
|
|
pci_unmap_single(hd->ioc->pcidev,
|
|
sc->SCp.dma_handle,
|
|
sc->request_bufflen,
|
|
sc->sc_data_direction);
|
|
}
|
|
sc->host_scribble = NULL;
|
|
sc->result = DID_NO_CONNECT << 16;
|
|
sc->scsi_done(sc);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_report_queue_full - Report QUEUE_FULL status returned
|
|
* from a SCSI target device.
|
|
* @sc: Pointer to scsi_cmnd structure
|
|
* @pScsiReply: Pointer to SCSIIOReply_t
|
|
* @pScsiReq: Pointer to original SCSI request
|
|
*
|
|
* This routine periodically reports QUEUE_FULL status returned from a
|
|
* SCSI target device. It reports this to the console via kernel
|
|
* printk() API call, not more than once every 10 seconds.
|
|
*/
|
|
static void
|
|
mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq)
|
|
{
|
|
long time = jiffies;
|
|
MPT_SCSI_HOST *hd;
|
|
|
|
if (sc->device == NULL)
|
|
return;
|
|
if (sc->device->host == NULL)
|
|
return;
|
|
if ((hd = (MPT_SCSI_HOST *)sc->device->host->hostdata) == NULL)
|
|
return;
|
|
|
|
if (time - hd->last_queue_full > 10 * HZ) {
|
|
dprintk((MYIOC_s_WARN_FMT "Device (%d:%d:%d) reported QUEUE_FULL!\n",
|
|
hd->ioc->name, 0, sc->device->id, sc->device->lun));
|
|
hd->last_queue_full = time;
|
|
}
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_remove - Removed scsi devices
|
|
* @pdev: Pointer to pci_dev structure
|
|
*
|
|
*
|
|
*/
|
|
void
|
|
mptscsih_remove(struct pci_dev *pdev)
|
|
{
|
|
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
|
|
struct Scsi_Host *host = ioc->sh;
|
|
MPT_SCSI_HOST *hd;
|
|
int count;
|
|
unsigned long flags;
|
|
int sz1;
|
|
|
|
if(!host) {
|
|
mpt_detach(pdev);
|
|
return;
|
|
}
|
|
|
|
scsi_remove_host(host);
|
|
|
|
if((hd = (MPT_SCSI_HOST *)host->hostdata) == NULL)
|
|
return;
|
|
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
/* Check DV thread active */
|
|
count = 10 * HZ;
|
|
spin_lock_irqsave(&dvtaskQ_lock, flags);
|
|
if (dvtaskQ_active) {
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
while(dvtaskQ_active && --count)
|
|
schedule_timeout_interruptible(1);
|
|
} else {
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
}
|
|
if (!count)
|
|
printk(KERN_ERR MYNAM ": ERROR - DV thread still active!\n");
|
|
#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY)
|
|
else
|
|
printk(KERN_ERR MYNAM ": DV thread orig %d, count %d\n", 10 * HZ, count);
|
|
#endif
|
|
#endif
|
|
|
|
mptscsih_shutdown(pdev);
|
|
|
|
sz1=0;
|
|
|
|
if (hd->ScsiLookup != NULL) {
|
|
sz1 = hd->ioc->req_depth * sizeof(void *);
|
|
kfree(hd->ScsiLookup);
|
|
hd->ScsiLookup = NULL;
|
|
}
|
|
|
|
/*
|
|
* Free pointer array.
|
|
*/
|
|
kfree(hd->Targets);
|
|
hd->Targets = NULL;
|
|
|
|
dprintk((MYIOC_s_INFO_FMT
|
|
"Free'd ScsiLookup (%d) memory\n",
|
|
hd->ioc->name, sz1));
|
|
|
|
kfree(hd->info_kbuf);
|
|
|
|
/* NULL the Scsi_Host pointer
|
|
*/
|
|
hd->ioc->sh = NULL;
|
|
|
|
scsi_host_put(host);
|
|
|
|
mpt_detach(pdev);
|
|
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_shutdown - reboot notifier
|
|
*
|
|
*/
|
|
void
|
|
mptscsih_shutdown(struct pci_dev *pdev)
|
|
{
|
|
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
|
|
struct Scsi_Host *host = ioc->sh;
|
|
MPT_SCSI_HOST *hd;
|
|
|
|
if(!host)
|
|
return;
|
|
|
|
hd = (MPT_SCSI_HOST *)host->hostdata;
|
|
|
|
/* Flush the cache of this adapter
|
|
*/
|
|
if(hd != NULL)
|
|
mptscsih_synchronize_cache(hd, 0);
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_suspend - Fusion MPT scsi driver suspend routine.
|
|
*
|
|
*
|
|
*/
|
|
int
|
|
mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
mptscsih_shutdown(pdev);
|
|
return mpt_suspend(pdev,state);
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_resume - Fusion MPT scsi driver resume routine.
|
|
*
|
|
*
|
|
*/
|
|
int
|
|
mptscsih_resume(struct pci_dev *pdev)
|
|
{
|
|
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
|
|
struct Scsi_Host *host = ioc->sh;
|
|
MPT_SCSI_HOST *hd;
|
|
|
|
mpt_resume(pdev);
|
|
|
|
if(!host)
|
|
return 0;
|
|
|
|
hd = (MPT_SCSI_HOST *)host->hostdata;
|
|
if(!hd)
|
|
return 0;
|
|
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
{
|
|
unsigned long lflags;
|
|
spin_lock_irqsave(&dvtaskQ_lock, lflags);
|
|
if (!dvtaskQ_active) {
|
|
dvtaskQ_active = 1;
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
|
|
INIT_WORK(&dvTaskQ_task,
|
|
mptscsih_domainValidation, (void *) hd);
|
|
schedule_work(&dvTaskQ_task);
|
|
} else {
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
|
|
}
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_info - Return information about MPT adapter
|
|
* @SChost: Pointer to Scsi_Host structure
|
|
*
|
|
* (linux scsi_host_template.info routine)
|
|
*
|
|
* Returns pointer to buffer where information was written.
|
|
*/
|
|
const char *
|
|
mptscsih_info(struct Scsi_Host *SChost)
|
|
{
|
|
MPT_SCSI_HOST *h;
|
|
int size = 0;
|
|
|
|
h = (MPT_SCSI_HOST *)SChost->hostdata;
|
|
|
|
if (h) {
|
|
if (h->info_kbuf == NULL)
|
|
if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL)
|
|
return h->info_kbuf;
|
|
h->info_kbuf[0] = '\0';
|
|
|
|
mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0);
|
|
h->info_kbuf[size-1] = '\0';
|
|
}
|
|
|
|
return h->info_kbuf;
|
|
}
|
|
|
|
struct info_str {
|
|
char *buffer;
|
|
int length;
|
|
int offset;
|
|
int pos;
|
|
};
|
|
|
|
static void
|
|
mptscsih_copy_mem_info(struct info_str *info, char *data, int len)
|
|
{
|
|
if (info->pos + len > info->length)
|
|
len = info->length - info->pos;
|
|
|
|
if (info->pos + len < info->offset) {
|
|
info->pos += len;
|
|
return;
|
|
}
|
|
|
|
if (info->pos < info->offset) {
|
|
data += (info->offset - info->pos);
|
|
len -= (info->offset - info->pos);
|
|
}
|
|
|
|
if (len > 0) {
|
|
memcpy(info->buffer + info->pos, data, len);
|
|
info->pos += len;
|
|
}
|
|
}
|
|
|
|
static int
|
|
mptscsih_copy_info(struct info_str *info, char *fmt, ...)
|
|
{
|
|
va_list args;
|
|
char buf[81];
|
|
int len;
|
|
|
|
va_start(args, fmt);
|
|
len = vsprintf(buf, fmt, args);
|
|
va_end(args);
|
|
|
|
mptscsih_copy_mem_info(info, buf, len);
|
|
return len;
|
|
}
|
|
|
|
static int
|
|
mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len)
|
|
{
|
|
struct info_str info;
|
|
|
|
info.buffer = pbuf;
|
|
info.length = len;
|
|
info.offset = offset;
|
|
info.pos = 0;
|
|
|
|
mptscsih_copy_info(&info, "%s: %s, ", ioc->name, ioc->prod_name);
|
|
mptscsih_copy_info(&info, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word);
|
|
mptscsih_copy_info(&info, "Ports=%d, ", ioc->facts.NumberOfPorts);
|
|
mptscsih_copy_info(&info, "MaxQ=%d\n", ioc->req_depth);
|
|
|
|
return ((info.pos > info.offset) ? info.pos - info.offset : 0);
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_proc_info - Return information about MPT adapter
|
|
*
|
|
* (linux scsi_host_template.info routine)
|
|
*
|
|
* buffer: if write, user data; if read, buffer for user
|
|
* length: if write, return length;
|
|
* offset: if write, 0; if read, the current offset into the buffer from
|
|
* the previous read.
|
|
* hostno: scsi host number
|
|
* func: if write = 1; if read = 0
|
|
*/
|
|
int
|
|
mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
|
|
int length, int func)
|
|
{
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
int size = 0;
|
|
|
|
if (func) {
|
|
/*
|
|
* write is not supported
|
|
*/
|
|
} else {
|
|
if (start)
|
|
*start = buffer;
|
|
|
|
size = mptscsih_host_info(ioc, buffer, offset, length);
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
#define ADD_INDEX_LOG(req_ent) do { } while(0)
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine.
|
|
* @SCpnt: Pointer to scsi_cmnd structure
|
|
* @done: Pointer SCSI mid-layer IO completion function
|
|
*
|
|
* (linux scsi_host_template.queuecommand routine)
|
|
* This is the primary SCSI IO start routine. Create a MPI SCSIIORequest
|
|
* from a linux scsi_cmnd request and send it to the IOC.
|
|
*
|
|
* Returns 0. (rtn value discarded by linux scsi mid-layer)
|
|
*/
|
|
int
|
|
mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
MPT_FRAME_HDR *mf;
|
|
SCSIIORequest_t *pScsiReq;
|
|
VirtDevice *pTarget = SCpnt->device->hostdata;
|
|
int lun;
|
|
u32 datalen;
|
|
u32 scsictl;
|
|
u32 scsidir;
|
|
u32 cmd_len;
|
|
int my_idx;
|
|
int ii;
|
|
|
|
hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata;
|
|
lun = SCpnt->device->lun;
|
|
SCpnt->scsi_done = done;
|
|
|
|
dmfprintk((MYIOC_s_INFO_FMT "qcmd: SCpnt=%p, done()=%p\n",
|
|
(hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt, done));
|
|
|
|
if (hd->resetPending) {
|
|
dtmprintk((MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
|
|
(hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt));
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
/*
|
|
* Put together a MPT SCSI request...
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(hd->ioc->DoneCtx, hd->ioc)) == NULL) {
|
|
dprintk((MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
|
|
hd->ioc->name));
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
pScsiReq = (SCSIIORequest_t *) mf;
|
|
|
|
my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
|
|
ADD_INDEX_LOG(my_idx);
|
|
|
|
/* TUR's being issued with scsictl=0x02000000 (DATA_IN)!
|
|
* Seems we may receive a buffer (datalen>0) even when there
|
|
* will be no data transfer! GRRRRR...
|
|
*/
|
|
if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
|
|
datalen = SCpnt->request_bufflen;
|
|
scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */
|
|
} else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
|
|
datalen = SCpnt->request_bufflen;
|
|
scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */
|
|
} else {
|
|
datalen = 0;
|
|
scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER;
|
|
}
|
|
|
|
/* Default to untagged. Once a target structure has been allocated,
|
|
* use the Inquiry data to determine if device supports tagged.
|
|
*/
|
|
if (pTarget
|
|
&& (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)
|
|
&& (SCpnt->device->tagged_supported)) {
|
|
scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
|
|
} else {
|
|
scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
|
|
}
|
|
|
|
/* Use the above information to set up the message frame
|
|
*/
|
|
pScsiReq->TargetID = (u8) pTarget->target_id;
|
|
pScsiReq->Bus = pTarget->bus_id;
|
|
pScsiReq->ChainOffset = 0;
|
|
pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
|
|
pScsiReq->CDBLength = SCpnt->cmd_len;
|
|
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
|
|
pScsiReq->Reserved = 0;
|
|
pScsiReq->MsgFlags = mpt_msg_flags();
|
|
pScsiReq->LUN[0] = 0;
|
|
pScsiReq->LUN[1] = lun;
|
|
pScsiReq->LUN[2] = 0;
|
|
pScsiReq->LUN[3] = 0;
|
|
pScsiReq->LUN[4] = 0;
|
|
pScsiReq->LUN[5] = 0;
|
|
pScsiReq->LUN[6] = 0;
|
|
pScsiReq->LUN[7] = 0;
|
|
pScsiReq->Control = cpu_to_le32(scsictl);
|
|
|
|
/*
|
|
* Write SCSI CDB into the message
|
|
*/
|
|
cmd_len = SCpnt->cmd_len;
|
|
for (ii=0; ii < cmd_len; ii++)
|
|
pScsiReq->CDB[ii] = SCpnt->cmnd[ii];
|
|
|
|
for (ii=cmd_len; ii < 16; ii++)
|
|
pScsiReq->CDB[ii] = 0;
|
|
|
|
/* DataLength */
|
|
pScsiReq->DataLength = cpu_to_le32(datalen);
|
|
|
|
/* SenseBuffer low address */
|
|
pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma
|
|
+ (my_idx * MPT_SENSE_BUFFER_ALLOC));
|
|
|
|
/* Now add the SG list
|
|
* Always have a SGE even if null length.
|
|
*/
|
|
if (datalen == 0) {
|
|
/* Add a NULL SGE */
|
|
mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
|
|
(dma_addr_t) -1);
|
|
} else {
|
|
/* Add a 32 or 64 bit SGE */
|
|
if (mptscsih_AddSGE(hd->ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
|
|
goto fail;
|
|
}
|
|
|
|
hd->ScsiLookup[my_idx] = SCpnt;
|
|
SCpnt->host_scribble = NULL;
|
|
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
if (hd->ioc->bus_type == SCSI) {
|
|
int dvStatus = hd->ioc->spi_data.dvStatus[pTarget->target_id];
|
|
int issueCmd = 1;
|
|
|
|
if (dvStatus || hd->ioc->spi_data.forceDv) {
|
|
|
|
if ((dvStatus & MPT_SCSICFG_NEED_DV) ||
|
|
(hd->ioc->spi_data.forceDv & MPT_SCSICFG_NEED_DV)) {
|
|
unsigned long lflags;
|
|
/* Schedule DV if necessary */
|
|
spin_lock_irqsave(&dvtaskQ_lock, lflags);
|
|
if (!dvtaskQ_active) {
|
|
dvtaskQ_active = 1;
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
|
|
INIT_WORK(&dvTaskQ_task, mptscsih_domainValidation, (void *) hd);
|
|
|
|
schedule_work(&dvTaskQ_task);
|
|
} else {
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
|
|
}
|
|
hd->ioc->spi_data.forceDv &= ~MPT_SCSICFG_NEED_DV;
|
|
}
|
|
|
|
/* Trying to do DV to this target, extend timeout.
|
|
* Wait to issue until flag is clear
|
|
*/
|
|
if (dvStatus & MPT_SCSICFG_DV_PENDING) {
|
|
mod_timer(&SCpnt->eh_timeout, jiffies + 40 * HZ);
|
|
issueCmd = 0;
|
|
}
|
|
|
|
/* Set the DV flags.
|
|
*/
|
|
if (dvStatus & MPT_SCSICFG_DV_NOT_DONE)
|
|
mptscsih_set_dvflags(hd, pScsiReq);
|
|
|
|
if (!issueCmd)
|
|
goto fail;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
mpt_put_msg_frame(hd->ioc->DoneCtx, hd->ioc, mf);
|
|
dmfprintk((MYIOC_s_INFO_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
|
|
hd->ioc->name, SCpnt, mf, my_idx));
|
|
DBG_DUMP_REQUEST_FRAME(mf)
|
|
return 0;
|
|
|
|
fail:
|
|
hd->ScsiLookup[my_idx] = NULL;
|
|
mptscsih_freeChainBuffers(hd->ioc, my_idx);
|
|
mpt_free_msg_frame(hd->ioc, mf);
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_freeChainBuffers - Function to free chain buffers associated
|
|
* with a SCSI IO request
|
|
* @hd: Pointer to the MPT_SCSI_HOST instance
|
|
* @req_idx: Index of the SCSI IO request frame.
|
|
*
|
|
* Called if SG chain buffer allocation fails and mptscsih callbacks.
|
|
* No return.
|
|
*/
|
|
static void
|
|
mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
|
|
{
|
|
MPT_FRAME_HDR *chain;
|
|
unsigned long flags;
|
|
int chain_idx;
|
|
int next;
|
|
|
|
/* Get the first chain index and reset
|
|
* tracker state.
|
|
*/
|
|
chain_idx = ioc->ReqToChain[req_idx];
|
|
ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN;
|
|
|
|
while (chain_idx != MPT_HOST_NO_CHAIN) {
|
|
|
|
/* Save the next chain buffer index */
|
|
next = ioc->ChainToChain[chain_idx];
|
|
|
|
/* Free this chain buffer and reset
|
|
* tracker
|
|
*/
|
|
ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN;
|
|
|
|
chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer
|
|
+ (chain_idx * ioc->req_sz));
|
|
|
|
spin_lock_irqsave(&ioc->FreeQlock, flags);
|
|
list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
|
|
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
|
|
|
|
dmfprintk((MYIOC_s_INFO_FMT "FreeChainBuffers (index %d)\n",
|
|
ioc->name, chain_idx));
|
|
|
|
/* handle next */
|
|
chain_idx = next;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* Reset Handling
|
|
*/
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_TMHandler - Generic handler for SCSI Task Management.
|
|
* Fall through to mpt_HardResetHandler if: not operational, too many
|
|
* failed TM requests or handshake failure.
|
|
*
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @type: Task Management type
|
|
* @target: Logical Target ID for reset (if appropriate)
|
|
* @lun: Logical Unit for reset (if appropriate)
|
|
* @ctx2abort: Context for the task to be aborted (if appropriate)
|
|
*
|
|
* Remark: Currently invoked from a non-interrupt thread (_bh).
|
|
*
|
|
* Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
|
|
* will be active.
|
|
*
|
|
* Returns 0 for SUCCESS or -1 if FAILED.
|
|
*/
|
|
static int
|
|
mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout)
|
|
{
|
|
MPT_ADAPTER *ioc;
|
|
int rc = -1;
|
|
int doTask = 1;
|
|
u32 ioc_raw_state;
|
|
unsigned long flags;
|
|
|
|
/* If FW is being reloaded currently, return success to
|
|
* the calling function.
|
|
*/
|
|
if (hd == NULL)
|
|
return 0;
|
|
|
|
ioc = hd->ioc;
|
|
if (ioc == NULL) {
|
|
printk(KERN_ERR MYNAM " TMHandler" " NULL ioc!\n");
|
|
return FAILED;
|
|
}
|
|
dtmprintk((MYIOC_s_INFO_FMT "TMHandler Entered!\n", ioc->name));
|
|
|
|
// SJR - CHECKME - Can we avoid this here?
|
|
// (mpt_HardResetHandler has this check...)
|
|
spin_lock_irqsave(&ioc->diagLock, flags);
|
|
if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) {
|
|
spin_unlock_irqrestore(&ioc->diagLock, flags);
|
|
return FAILED;
|
|
}
|
|
spin_unlock_irqrestore(&ioc->diagLock, flags);
|
|
|
|
/* Wait a fixed amount of time for the TM pending flag to be cleared.
|
|
* If we time out and not bus reset, then we return a FAILED status to the caller.
|
|
* The call to mptscsih_tm_pending_wait() will set the pending flag if we are
|
|
* successful. Otherwise, reload the FW.
|
|
*/
|
|
if (mptscsih_tm_pending_wait(hd) == FAILED) {
|
|
if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
|
|
dtmprintk((KERN_INFO MYNAM ": %s: TMHandler abort: "
|
|
"Timed out waiting for last TM (%d) to complete! \n",
|
|
hd->ioc->name, hd->tmPending));
|
|
return FAILED;
|
|
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
|
|
dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target reset: "
|
|
"Timed out waiting for last TM (%d) to complete! \n",
|
|
hd->ioc->name, hd->tmPending));
|
|
return FAILED;
|
|
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
|
|
dtmprintk((KERN_INFO MYNAM ": %s: TMHandler bus reset: "
|
|
"Timed out waiting for last TM (%d) to complete! \n",
|
|
hd->ioc->name, hd->tmPending));
|
|
if (hd->tmPending & (1 << MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS))
|
|
return FAILED;
|
|
|
|
doTask = 0;
|
|
}
|
|
} else {
|
|
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
|
|
hd->tmPending |= (1 << type);
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
}
|
|
|
|
/* Is operational?
|
|
*/
|
|
ioc_raw_state = mpt_GetIocState(hd->ioc, 0);
|
|
|
|
#ifdef MPT_DEBUG_RESET
|
|
if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
|
|
printk(MYIOC_s_WARN_FMT
|
|
"TM Handler: IOC Not operational(0x%x)!\n",
|
|
hd->ioc->name, ioc_raw_state);
|
|
}
|
|
#endif
|
|
|
|
if (doTask && ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL)
|
|
&& !(ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
|
|
|
|
/* Isse the Task Mgmt request.
|
|
*/
|
|
if (hd->hard_resets < -1)
|
|
hd->hard_resets++;
|
|
rc = mptscsih_IssueTaskMgmt(hd, type, channel, target, lun, ctx2abort, timeout);
|
|
if (rc) {
|
|
printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n", hd->ioc->name);
|
|
} else {
|
|
dtmprintk((MYIOC_s_INFO_FMT "Issue of TaskMgmt Successful!\n", hd->ioc->name));
|
|
}
|
|
}
|
|
|
|
/* Only fall through to the HRH if this is a bus reset
|
|
*/
|
|
if ((type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) && (rc ||
|
|
ioc->reload_fw || (ioc->alt_ioc && ioc->alt_ioc->reload_fw))) {
|
|
dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
|
|
hd->ioc->name));
|
|
rc = mpt_HardResetHandler(hd->ioc, CAN_SLEEP);
|
|
}
|
|
|
|
dtmprintk((MYIOC_s_INFO_FMT "TMHandler rc = %d!\n", hd->ioc->name, rc));
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_IssueTaskMgmt - Generic send Task Management function.
|
|
* @hd: Pointer to MPT_SCSI_HOST structure
|
|
* @type: Task Management type
|
|
* @target: Logical Target ID for reset (if appropriate)
|
|
* @lun: Logical Unit for reset (if appropriate)
|
|
* @ctx2abort: Context for the task to be aborted (if appropriate)
|
|
*
|
|
* Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
|
|
* or a non-interrupt thread. In the former, must not call schedule().
|
|
*
|
|
* Not all fields are meaningfull for all task types.
|
|
*
|
|
* Returns 0 for SUCCESS, -999 for "no msg frames",
|
|
* else other non-zero value returned.
|
|
*/
|
|
static int
|
|
mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout)
|
|
{
|
|
MPT_FRAME_HDR *mf;
|
|
SCSITaskMgmt_t *pScsiTm;
|
|
int ii;
|
|
int retval;
|
|
|
|
/* Return Fail to calling function if no message frames available.
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc)) == NULL) {
|
|
dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
|
|
hd->ioc->name));
|
|
return FAILED;
|
|
}
|
|
dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
|
|
hd->ioc->name, mf));
|
|
|
|
/* Format the Request
|
|
*/
|
|
pScsiTm = (SCSITaskMgmt_t *) mf;
|
|
pScsiTm->TargetID = target;
|
|
pScsiTm->Bus = channel;
|
|
pScsiTm->ChainOffset = 0;
|
|
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
|
|
|
|
pScsiTm->Reserved = 0;
|
|
pScsiTm->TaskType = type;
|
|
pScsiTm->Reserved1 = 0;
|
|
pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
|
|
? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
|
|
|
|
for (ii= 0; ii < 8; ii++) {
|
|
pScsiTm->LUN[ii] = 0;
|
|
}
|
|
pScsiTm->LUN[1] = lun;
|
|
|
|
for (ii=0; ii < 7; ii++)
|
|
pScsiTm->Reserved2[ii] = 0;
|
|
|
|
pScsiTm->TaskMsgContext = ctx2abort;
|
|
|
|
dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
|
|
hd->ioc->name, ctx2abort, type));
|
|
|
|
DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);
|
|
|
|
if ((retval = mpt_send_handshake_request(hd->ioc->TaskCtx, hd->ioc,
|
|
sizeof(SCSITaskMgmt_t), (u32*)pScsiTm,
|
|
CAN_SLEEP)) != 0) {
|
|
dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!"
|
|
" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
|
|
hd->ioc, mf));
|
|
mpt_free_msg_frame(hd->ioc, mf);
|
|
return retval;
|
|
}
|
|
|
|
if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
|
|
dfailprintk((MYIOC_s_ERR_FMT "_wait_for_completion FAILED!"
|
|
" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
|
|
hd->ioc, mf));
|
|
mpt_free_msg_frame(hd->ioc, mf);
|
|
dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
|
|
hd->ioc->name));
|
|
retval = mpt_HardResetHandler(hd->ioc, CAN_SLEEP);
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
|
|
* @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted
|
|
*
|
|
* (linux scsi_host_template.eh_abort_handler routine)
|
|
*
|
|
* Returns SUCCESS or FAILED.
|
|
*/
|
|
int
|
|
mptscsih_abort(struct scsi_cmnd * SCpnt)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
MPT_ADAPTER *ioc;
|
|
MPT_FRAME_HDR *mf;
|
|
u32 ctx2abort;
|
|
int scpnt_idx;
|
|
int retval;
|
|
|
|
/* If we can't locate our host adapter structure, return FAILED status.
|
|
*/
|
|
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) {
|
|
SCpnt->result = DID_RESET << 16;
|
|
SCpnt->scsi_done(SCpnt);
|
|
dfailprintk((KERN_INFO MYNAM ": mptscsih_abort: "
|
|
"Can't locate host! (sc=%p)\n",
|
|
SCpnt));
|
|
return FAILED;
|
|
}
|
|
|
|
ioc = hd->ioc;
|
|
if (hd->resetPending) {
|
|
return FAILED;
|
|
}
|
|
|
|
if (hd->timeouts < -1)
|
|
hd->timeouts++;
|
|
|
|
/* Find this command
|
|
*/
|
|
if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
|
|
/* Cmd not found in ScsiLookup.
|
|
* Do OS callback.
|
|
*/
|
|
SCpnt->result = DID_RESET << 16;
|
|
dtmprintk((KERN_INFO MYNAM ": %s: mptscsih_abort: "
|
|
"Command not in the active list! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt));
|
|
return SUCCESS;
|
|
}
|
|
|
|
printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt);
|
|
scsi_print_command(SCpnt);
|
|
|
|
/* Most important! Set TaskMsgContext to SCpnt's MsgContext!
|
|
* (the IO to be ABORT'd)
|
|
*
|
|
* NOTE: Since we do not byteswap MsgContext, we do not
|
|
* swap it here either. It is an opaque cookie to
|
|
* the controller, so it does not matter. -DaveM
|
|
*/
|
|
mf = MPT_INDEX_2_MFPTR(hd->ioc, scpnt_idx);
|
|
ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
|
|
|
|
hd->abortSCpnt = SCpnt;
|
|
|
|
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
|
|
SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun,
|
|
ctx2abort, 2 /* 2 second timeout */);
|
|
|
|
printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
|
|
hd->ioc->name,
|
|
((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
|
|
|
|
if (retval == 0)
|
|
return SUCCESS;
|
|
|
|
if(retval != FAILED ) {
|
|
hd->tmPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
}
|
|
return FAILED;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_dev_reset - Perform a SCSI TARGET_RESET! new_eh variant
|
|
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
|
|
*
|
|
* (linux scsi_host_template.eh_dev_reset_handler routine)
|
|
*
|
|
* Returns SUCCESS or FAILED.
|
|
*/
|
|
int
|
|
mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
int retval;
|
|
|
|
/* If we can't locate our host adapter structure, return FAILED status.
|
|
*/
|
|
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
|
|
dtmprintk((KERN_INFO MYNAM ": mptscsih_dev_reset: "
|
|
"Can't locate host! (sc=%p)\n",
|
|
SCpnt));
|
|
return FAILED;
|
|
}
|
|
|
|
if (hd->resetPending)
|
|
return FAILED;
|
|
|
|
printk(KERN_WARNING MYNAM ": %s: attempting target reset! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt);
|
|
scsi_print_command(SCpnt);
|
|
|
|
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
|
|
SCpnt->device->channel, SCpnt->device->id,
|
|
0, 0, 5 /* 5 second timeout */);
|
|
|
|
printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
|
|
hd->ioc->name,
|
|
((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
|
|
|
|
if (retval == 0)
|
|
return SUCCESS;
|
|
|
|
if(retval != FAILED ) {
|
|
hd->tmPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
}
|
|
return FAILED;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant
|
|
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
|
|
*
|
|
* (linux scsi_host_template.eh_bus_reset_handler routine)
|
|
*
|
|
* Returns SUCCESS or FAILED.
|
|
*/
|
|
int
|
|
mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
int retval;
|
|
|
|
/* If we can't locate our host adapter structure, return FAILED status.
|
|
*/
|
|
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
|
|
dtmprintk((KERN_INFO MYNAM ": mptscsih_bus_reset: "
|
|
"Can't locate host! (sc=%p)\n",
|
|
SCpnt ) );
|
|
return FAILED;
|
|
}
|
|
|
|
printk(KERN_WARNING MYNAM ": %s: attempting bus reset! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt);
|
|
scsi_print_command(SCpnt);
|
|
|
|
if (hd->timeouts < -1)
|
|
hd->timeouts++;
|
|
|
|
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
|
|
SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */);
|
|
|
|
printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
|
|
hd->ioc->name,
|
|
((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
|
|
|
|
if (retval == 0)
|
|
return SUCCESS;
|
|
|
|
if(retval != FAILED ) {
|
|
hd->tmPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
}
|
|
return FAILED;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_host_reset - Perform a SCSI host adapter RESET!
|
|
* new_eh variant
|
|
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
|
|
*
|
|
* (linux scsi_host_template.eh_host_reset_handler routine)
|
|
*
|
|
* Returns SUCCESS or FAILED.
|
|
*/
|
|
int
|
|
mptscsih_host_reset(struct scsi_cmnd *SCpnt)
|
|
{
|
|
MPT_SCSI_HOST * hd;
|
|
int status = SUCCESS;
|
|
|
|
/* If we can't locate the host to reset, then we failed. */
|
|
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
|
|
dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
|
|
"Can't locate host! (sc=%p)\n",
|
|
SCpnt ) );
|
|
return FAILED;
|
|
}
|
|
|
|
printk(KERN_WARNING MYNAM ": %s: Attempting host reset! (sc=%p)\n",
|
|
hd->ioc->name, SCpnt);
|
|
|
|
/* If our attempts to reset the host failed, then return a failed
|
|
* status. The host will be taken off line by the SCSI mid-layer.
|
|
*/
|
|
if (mpt_HardResetHandler(hd->ioc, CAN_SLEEP) < 0){
|
|
status = FAILED;
|
|
} else {
|
|
/* Make sure TM pending is cleared and TM state is set to
|
|
* NONE.
|
|
*/
|
|
hd->tmPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
}
|
|
|
|
dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
|
|
"Status = %s\n",
|
|
(status == SUCCESS) ? "SUCCESS" : "FAILED" ) );
|
|
|
|
return status;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_tm_pending_wait - wait for pending task management request to
|
|
* complete.
|
|
* @hd: Pointer to MPT host structure.
|
|
*
|
|
* Returns {SUCCESS,FAILED}.
|
|
*/
|
|
static int
|
|
mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
|
|
{
|
|
unsigned long flags;
|
|
int loop_count = 4 * 10; /* Wait 10 seconds */
|
|
int status = FAILED;
|
|
|
|
do {
|
|
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
|
|
if (hd->tmState == TM_STATE_NONE) {
|
|
hd->tmState = TM_STATE_IN_PROGRESS;
|
|
hd->tmPending = 1;
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
status = SUCCESS;
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
msleep(250);
|
|
} while (--loop_count);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_tm_wait_for_completion - wait for completion of TM task
|
|
* @hd: Pointer to MPT host structure.
|
|
*
|
|
* Returns {SUCCESS,FAILED}.
|
|
*/
|
|
static int
|
|
mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
|
|
{
|
|
unsigned long flags;
|
|
int loop_count = 4 * timeout;
|
|
int status = FAILED;
|
|
|
|
do {
|
|
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
|
|
if(hd->tmPending == 0) {
|
|
status = SUCCESS;
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
|
|
msleep_interruptible(250);
|
|
} while (--loop_count);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @mf: Pointer to SCSI task mgmt request frame
|
|
* @mr: Pointer to SCSI task mgmt reply frame
|
|
*
|
|
* This routine is called from mptbase.c::mpt_interrupt() at the completion
|
|
* of any SCSI task management request.
|
|
* This routine is registered with the MPT (base) driver at driver
|
|
* load/init time via the mpt_register() API call.
|
|
*
|
|
* Returns 1 indicating alloc'd request frame ptr should be freed.
|
|
*/
|
|
int
|
|
mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
|
|
{
|
|
SCSITaskMgmtReply_t *pScsiTmReply;
|
|
SCSITaskMgmt_t *pScsiTmReq;
|
|
MPT_SCSI_HOST *hd;
|
|
unsigned long flags;
|
|
u16 iocstatus;
|
|
u8 tmType;
|
|
|
|
dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
|
|
ioc->name, mf, mr));
|
|
if (ioc->sh) {
|
|
/* Depending on the thread, a timer is activated for
|
|
* the TM request. Delete this timer on completion of TM.
|
|
* Decrement count of outstanding TM requests.
|
|
*/
|
|
hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
|
|
} else {
|
|
dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt Complete: NULL Scsi Host Ptr\n",
|
|
ioc->name));
|
|
return 1;
|
|
}
|
|
|
|
if (mr == NULL) {
|
|
dtmprintk((MYIOC_s_WARN_FMT "ERROR! TaskMgmt Reply: NULL Request %p\n",
|
|
ioc->name, mf));
|
|
return 1;
|
|
} else {
|
|
pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
|
|
pScsiTmReq = (SCSITaskMgmt_t*)mf;
|
|
|
|
/* Figure out if this was ABORT_TASK, TARGET_RESET, or BUS_RESET! */
|
|
tmType = pScsiTmReq->TaskType;
|
|
|
|
dtmprintk((MYIOC_s_WARN_FMT " TaskType = %d, TerminationCount=%d\n",
|
|
ioc->name, tmType, le32_to_cpu(pScsiTmReply->TerminationCount)));
|
|
DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply);
|
|
|
|
iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
|
|
dtmprintk((MYIOC_s_WARN_FMT " SCSI TaskMgmt (%d) IOCStatus=%04x IOCLogInfo=%08x\n",
|
|
ioc->name, tmType, iocstatus, le32_to_cpu(pScsiTmReply->IOCLogInfo)));
|
|
/* Error? (anything non-zero?) */
|
|
if (iocstatus) {
|
|
|
|
/* clear flags and continue.
|
|
*/
|
|
if (tmType == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
|
|
hd->abortSCpnt = NULL;
|
|
|
|
/* If an internal command is present
|
|
* or the TM failed - reload the FW.
|
|
* FC FW may respond FAILED to an ABORT
|
|
*/
|
|
if (tmType == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
|
|
if ((hd->cmdPtr) ||
|
|
(iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED)) {
|
|
if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0) {
|
|
printk((KERN_WARNING
|
|
" Firmware Reload FAILED!!\n"));
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
dtmprintk((MYIOC_s_WARN_FMT " TaskMgmt SUCCESS\n", ioc->name));
|
|
|
|
hd->abortSCpnt = NULL;
|
|
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&ioc->FreeQlock, flags);
|
|
hd->tmPending = 0;
|
|
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
|
|
hd->tmState = TM_STATE_NONE;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* This is anyones guess quite frankly.
|
|
*/
|
|
int
|
|
mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
|
|
sector_t capacity, int geom[])
|
|
{
|
|
int heads;
|
|
int sectors;
|
|
sector_t cylinders;
|
|
ulong dummy;
|
|
|
|
heads = 64;
|
|
sectors = 32;
|
|
|
|
dummy = heads * sectors;
|
|
cylinders = capacity;
|
|
sector_div(cylinders,dummy);
|
|
|
|
/*
|
|
* Handle extended translation size for logical drives
|
|
* > 1Gb
|
|
*/
|
|
if ((ulong)capacity >= 0x200000) {
|
|
heads = 255;
|
|
sectors = 63;
|
|
dummy = heads * sectors;
|
|
cylinders = capacity;
|
|
sector_div(cylinders,dummy);
|
|
}
|
|
|
|
/* return result */
|
|
geom[0] = heads;
|
|
geom[1] = sectors;
|
|
geom[2] = cylinders;
|
|
|
|
dprintk((KERN_NOTICE
|
|
": bios_param: Id=%i Lun=%i Channel=%i CHS=%i/%i/%i\n",
|
|
sdev->id, sdev->lun,sdev->channel,(int)cylinders,heads,sectors));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* OS entry point to allow host driver to alloc memory
|
|
* for each scsi device. Called once per device the bus scan.
|
|
* Return non-zero if allocation fails.
|
|
* Init memory once per id (not LUN).
|
|
*/
|
|
int
|
|
mptscsih_slave_alloc(struct scsi_device *device)
|
|
{
|
|
struct Scsi_Host *host = device->host;
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
|
|
VirtDevice *vdev;
|
|
uint target = device->id;
|
|
|
|
if (hd == NULL)
|
|
return -ENODEV;
|
|
|
|
if ((vdev = hd->Targets[target]) != NULL)
|
|
goto out;
|
|
|
|
vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL);
|
|
if (!vdev) {
|
|
printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
|
|
hd->ioc->name, sizeof(VirtDevice));
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(vdev, 0, sizeof(VirtDevice));
|
|
vdev->tflags = MPT_TARGET_FLAGS_Q_YES;
|
|
vdev->ioc_id = hd->ioc->id;
|
|
vdev->target_id = device->id;
|
|
vdev->bus_id = device->channel;
|
|
vdev->raidVolume = 0;
|
|
hd->Targets[device->id] = vdev;
|
|
if (hd->ioc->bus_type == SCSI) {
|
|
if (hd->ioc->raid_data.isRaid & (1 << device->id)) {
|
|
vdev->raidVolume = 1;
|
|
ddvtprintk((KERN_INFO
|
|
"RAID Volume @ id %d\n", device->id));
|
|
}
|
|
} else {
|
|
vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
|
|
}
|
|
|
|
out:
|
|
vdev->num_luns++;
|
|
device->hostdata = vdev;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* OS entry point to allow for host driver to free allocated memory
|
|
* Called if no device present or device being unloaded
|
|
*/
|
|
void
|
|
mptscsih_slave_destroy(struct scsi_device *device)
|
|
{
|
|
struct Scsi_Host *host = device->host;
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
|
|
VirtDevice *vdev;
|
|
uint target = device->id;
|
|
uint lun = device->lun;
|
|
|
|
if (hd == NULL)
|
|
return;
|
|
|
|
mptscsih_search_running_cmds(hd, target, lun);
|
|
|
|
vdev = hd->Targets[target];
|
|
vdev->luns[0] &= ~(1 << lun);
|
|
if (--vdev->num_luns)
|
|
return;
|
|
|
|
kfree(hd->Targets[target]);
|
|
hd->Targets[target] = NULL;
|
|
|
|
if (hd->ioc->bus_type == SCSI) {
|
|
if (mptscsih_is_phys_disk(hd->ioc, target)) {
|
|
hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
|
|
} else {
|
|
hd->ioc->spi_data.dvStatus[target] =
|
|
MPT_SCSICFG_NEGOTIATE;
|
|
|
|
if (!hd->negoNvram) {
|
|
hd->ioc->spi_data.dvStatus[target] |=
|
|
MPT_SCSICFG_DV_NOT_DONE;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_change_queue_depth - This function will set a devices queue depth
|
|
* @sdev: per scsi_device pointer
|
|
* @qdepth: requested queue depth
|
|
*
|
|
* Adding support for new 'change_queue_depth' api.
|
|
*/
|
|
int
|
|
mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
|
|
{
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
|
|
VirtDevice *pTarget;
|
|
int max_depth;
|
|
int tagged;
|
|
|
|
if (hd == NULL)
|
|
return 0;
|
|
if (!(pTarget = hd->Targets[sdev->id]))
|
|
return 0;
|
|
|
|
if (hd->ioc->bus_type == SCSI) {
|
|
if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) {
|
|
if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES))
|
|
max_depth = 1;
|
|
else if (((pTarget->inq_data[0] & 0x1f) == 0x00) &&
|
|
(pTarget->minSyncFactor <= MPT_ULTRA160 ))
|
|
max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
|
|
else
|
|
max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
|
|
} else {
|
|
/* error case - No Inq. Data */
|
|
max_depth = 1;
|
|
}
|
|
} else
|
|
max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
|
|
|
|
if (qdepth > max_depth)
|
|
qdepth = max_depth;
|
|
if (qdepth == 1)
|
|
tagged = 0;
|
|
else
|
|
tagged = MSG_SIMPLE_TAG;
|
|
|
|
scsi_adjust_queue_depth(sdev, tagged, qdepth);
|
|
return sdev->queue_depth;
|
|
}
|
|
|
|
/*
|
|
* OS entry point to adjust the queue_depths on a per-device basis.
|
|
* Called once per device the bus scan. Use it to force the queue_depth
|
|
* member to 1 if a device does not support Q tags.
|
|
* Return non-zero if fails.
|
|
*/
|
|
int
|
|
mptscsih_slave_configure(struct scsi_device *device)
|
|
{
|
|
struct Scsi_Host *sh = device->host;
|
|
VirtDevice *pTarget;
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sh->hostdata;
|
|
|
|
if ((hd == NULL) || (hd->Targets == NULL)) {
|
|
return 0;
|
|
}
|
|
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"device @ %p, id=%d, LUN=%d, channel=%d\n",
|
|
hd->ioc->name, device, device->id, device->lun, device->channel));
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"sdtr %d wdtr %d ppr %d inq length=%d\n",
|
|
hd->ioc->name, device->sdtr, device->wdtr,
|
|
device->ppr, device->inquiry_len));
|
|
|
|
if (device->id > sh->max_id) {
|
|
/* error case, should never happen */
|
|
scsi_adjust_queue_depth(device, 0, 1);
|
|
goto slave_configure_exit;
|
|
}
|
|
|
|
pTarget = hd->Targets[device->id];
|
|
|
|
if (pTarget == NULL) {
|
|
/* Driver doesn't know about this device.
|
|
* Kernel may generate a "Dummy Lun 0" which
|
|
* may become a real Lun if a
|
|
* "scsi add-single-device" command is executed
|
|
* while the driver is active (hot-plug a
|
|
* device). LSI Raid controllers need
|
|
* queue_depth set to DEV_HIGH for this reason.
|
|
*/
|
|
scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG,
|
|
MPT_SCSI_CMD_PER_DEV_HIGH);
|
|
goto slave_configure_exit;
|
|
}
|
|
|
|
mptscsih_initTarget(hd, device->channel, device->id, device->lun,
|
|
device->inquiry, device->inquiry_len );
|
|
mptscsih_change_queue_depth(device, MPT_SCSI_CMD_PER_DEV_HIGH);
|
|
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"Queue depth=%d, tflags=%x\n",
|
|
hd->ioc->name, device->queue_depth, pTarget->tflags));
|
|
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
|
|
hd->ioc->name, pTarget->negoFlags, pTarget->maxOffset, pTarget->minSyncFactor));
|
|
|
|
slave_configure_exit:
|
|
|
|
dsprintk((MYIOC_s_INFO_FMT
|
|
"tagged %d, simple %d, ordered %d\n",
|
|
hd->ioc->name,device->tagged_supported, device->simple_tags,
|
|
device->ordered_tags));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* Private routines...
|
|
*/
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* Utility function to copy sense data from the scsi_cmnd buffer
|
|
* to the FC and SCSI target structures.
|
|
*
|
|
*/
|
|
static void
|
|
mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
|
|
{
|
|
VirtDevice *target;
|
|
SCSIIORequest_t *pReq;
|
|
u32 sense_count = le32_to_cpu(pScsiReply->SenseCount);
|
|
int index;
|
|
|
|
/* Get target structure
|
|
*/
|
|
pReq = (SCSIIORequest_t *) mf;
|
|
index = (int) pReq->TargetID;
|
|
target = hd->Targets[index];
|
|
|
|
if (sense_count) {
|
|
u8 *sense_data;
|
|
int req_index;
|
|
|
|
/* Copy the sense received into the scsi command block. */
|
|
req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
sense_data = ((u8 *)hd->ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
|
|
memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc));
|
|
|
|
/* Log SMART data (asc = 0x5D, non-IM case only) if required.
|
|
*/
|
|
if ((hd->ioc->events) && (hd->ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
|
|
if ((sense_data[12] == 0x5D) && (target->raidVolume == 0)) {
|
|
int idx;
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
|
|
idx = ioc->eventContext % ioc->eventLogSize;
|
|
ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
|
|
ioc->events[idx].eventContext = ioc->eventContext;
|
|
|
|
ioc->events[idx].data[0] = (pReq->LUN[1] << 24) ||
|
|
(MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) ||
|
|
(pReq->Bus << 8) || pReq->TargetID;
|
|
|
|
ioc->events[idx].data[1] = (sense_data[13] << 8) || sense_data[12];
|
|
|
|
ioc->eventContext++;
|
|
}
|
|
}
|
|
} else {
|
|
dprintk((MYIOC_s_INFO_FMT "Hmmm... SenseData len=0! (?)\n",
|
|
hd->ioc->name));
|
|
}
|
|
}
|
|
|
|
static u32
|
|
SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
int i;
|
|
|
|
hd = (MPT_SCSI_HOST *) sc->device->host->hostdata;
|
|
|
|
for (i = 0; i < hd->ioc->req_depth; i++) {
|
|
if (hd->ScsiLookup[i] == sc) {
|
|
return i;
|
|
}
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
int
|
|
mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
unsigned long flags;
|
|
int ii;
|
|
|
|
dtmprintk((KERN_WARNING MYNAM
|
|
": IOC %s_reset routed to SCSI host driver!\n",
|
|
reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
|
|
reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
|
|
|
|
/* If a FW reload request arrives after base installed but
|
|
* before all scsi hosts have been attached, then an alt_ioc
|
|
* may have a NULL sh pointer.
|
|
*/
|
|
if ((ioc->sh == NULL) || (ioc->sh->hostdata == NULL))
|
|
return 0;
|
|
else
|
|
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
|
|
|
|
if (reset_phase == MPT_IOC_SETUP_RESET) {
|
|
dtmprintk((MYIOC_s_WARN_FMT "Setup-Diag Reset\n", ioc->name));
|
|
|
|
/* Clean Up:
|
|
* 1. Set Hard Reset Pending Flag
|
|
* All new commands go to doneQ
|
|
*/
|
|
hd->resetPending = 1;
|
|
|
|
} else if (reset_phase == MPT_IOC_PRE_RESET) {
|
|
dtmprintk((MYIOC_s_WARN_FMT "Pre-Diag Reset\n", ioc->name));
|
|
|
|
/* 2. Flush running commands
|
|
* Clean ScsiLookup (and associated memory)
|
|
* AND clean mytaskQ
|
|
*/
|
|
|
|
/* 2b. Reply to OS all known outstanding I/O commands.
|
|
*/
|
|
mptscsih_flush_running_cmds(hd);
|
|
|
|
/* 2c. If there was an internal command that
|
|
* has not completed, configuration or io request,
|
|
* free these resources.
|
|
*/
|
|
if (hd->cmdPtr) {
|
|
del_timer(&hd->timer);
|
|
mpt_free_msg_frame(ioc, hd->cmdPtr);
|
|
}
|
|
|
|
dtmprintk((MYIOC_s_WARN_FMT "Pre-Reset complete.\n", ioc->name));
|
|
|
|
} else {
|
|
dtmprintk((MYIOC_s_WARN_FMT "Post-Diag Reset\n", ioc->name));
|
|
|
|
/* Once a FW reload begins, all new OS commands are
|
|
* redirected to the doneQ w/ a reset status.
|
|
* Init all control structures.
|
|
*/
|
|
|
|
/* ScsiLookup initialization
|
|
*/
|
|
for (ii=0; ii < hd->ioc->req_depth; ii++)
|
|
hd->ScsiLookup[ii] = NULL;
|
|
|
|
/* 2. Chain Buffer initialization
|
|
*/
|
|
|
|
/* 4. Renegotiate to all devices, if SCSI
|
|
*/
|
|
if (ioc->bus_type == SCSI) {
|
|
dnegoprintk(("writeSDP1: ALL_IDS USE_NVRAM\n"));
|
|
mptscsih_writeSDP1(hd, 0, 0, MPT_SCSICFG_ALL_IDS | MPT_SCSICFG_USE_NVRAM);
|
|
}
|
|
|
|
/* 5. Enable new commands to be posted
|
|
*/
|
|
spin_lock_irqsave(&ioc->FreeQlock, flags);
|
|
hd->tmPending = 0;
|
|
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
|
|
hd->resetPending = 0;
|
|
hd->tmState = TM_STATE_NONE;
|
|
|
|
/* 6. If there was an internal command,
|
|
* wake this process up.
|
|
*/
|
|
if (hd->cmdPtr) {
|
|
/*
|
|
* Wake up the original calling thread
|
|
*/
|
|
hd->pLocal = &hd->localReply;
|
|
hd->pLocal->completion = MPT_SCANDV_DID_RESET;
|
|
hd->scandv_wait_done = 1;
|
|
wake_up(&hd->scandv_waitq);
|
|
hd->cmdPtr = NULL;
|
|
}
|
|
|
|
/* 7. Set flag to force DV and re-read IOC Page 3
|
|
*/
|
|
if (ioc->bus_type == SCSI) {
|
|
ioc->spi_data.forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
|
|
ddvtprintk(("Set reload IOC Pg3 Flag\n"));
|
|
}
|
|
|
|
dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
|
|
|
|
}
|
|
|
|
return 1; /* currently means nothing really */
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* work queue thread to clear the persitency table */
|
|
static void
|
|
mptscsih_sas_persist_clear_table(void * arg)
|
|
{
|
|
MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
|
|
|
|
mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
int
|
|
mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
|
|
|
|
devtprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
|
|
ioc->name, event));
|
|
|
|
if (ioc->sh == NULL ||
|
|
((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL))
|
|
return 1;
|
|
|
|
switch (event) {
|
|
case MPI_EVENT_UNIT_ATTENTION: /* 03 */
|
|
/* FIXME! */
|
|
break;
|
|
case MPI_EVENT_IOC_BUS_RESET: /* 04 */
|
|
case MPI_EVENT_EXT_BUS_RESET: /* 05 */
|
|
if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1))
|
|
hd->soft_resets++;
|
|
break;
|
|
case MPI_EVENT_LOGOUT: /* 09 */
|
|
/* FIXME! */
|
|
break;
|
|
|
|
/*
|
|
* CHECKME! Don't think we need to do
|
|
* anything for these, but...
|
|
*/
|
|
case MPI_EVENT_RESCAN: /* 06 */
|
|
case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */
|
|
case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */
|
|
/*
|
|
* CHECKME! Falling thru...
|
|
*/
|
|
break;
|
|
|
|
case MPI_EVENT_INTEGRATED_RAID: /* 0B */
|
|
{
|
|
pMpiEventDataRaid_t pRaidEventData =
|
|
(pMpiEventDataRaid_t) pEvReply->Data;
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
/* Domain Validation Needed */
|
|
if (ioc->bus_type == SCSI &&
|
|
pRaidEventData->ReasonCode ==
|
|
MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED)
|
|
mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum);
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
/* Persistent table is full. */
|
|
case MPI_EVENT_PERSISTENT_TABLE_FULL:
|
|
INIT_WORK(&mptscsih_persistTask,
|
|
mptscsih_sas_persist_clear_table,(void *)ioc);
|
|
schedule_work(&mptscsih_persistTask);
|
|
break;
|
|
|
|
case MPI_EVENT_NONE: /* 00 */
|
|
case MPI_EVENT_LOG_DATA: /* 01 */
|
|
case MPI_EVENT_STATE_CHANGE: /* 02 */
|
|
case MPI_EVENT_EVENT_CHANGE: /* 0A */
|
|
default:
|
|
dprintk((KERN_INFO " Ignoring event (=%02Xh)\n", event));
|
|
break;
|
|
}
|
|
|
|
return 1; /* currently means nothing really */
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_initTarget - Target, LUN alloc/free functionality.
|
|
* @hd: Pointer to MPT_SCSI_HOST structure
|
|
* @bus_id: Bus number (?)
|
|
* @target_id: SCSI target id
|
|
* @lun: SCSI LUN id
|
|
* @data: Pointer to data
|
|
* @dlen: Number of INQUIRY bytes
|
|
*
|
|
* NOTE: It's only SAFE to call this routine if data points to
|
|
* sane & valid STANDARD INQUIRY data!
|
|
*
|
|
* Allocate and initialize memory for this target.
|
|
* Save inquiry data.
|
|
*
|
|
*/
|
|
static void
|
|
mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen)
|
|
{
|
|
int indexed_lun, lun_index;
|
|
VirtDevice *vdev;
|
|
SpiCfgData *pSpi;
|
|
char data_56;
|
|
|
|
dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
|
|
hd->ioc->name, bus_id, target_id, lun, hd));
|
|
|
|
/*
|
|
* If the peripheral qualifier filter is enabled then if the target reports a 0x1
|
|
* (i.e. The targer is capable of supporting the specified peripheral device type
|
|
* on this logical unit; however, the physical device is not currently connected
|
|
* to this logical unit) it will be converted to a 0x3 (i.e. The target is not
|
|
* capable of supporting a physical device on this logical unit). This is to work
|
|
* around a bug in th emid-layer in some distributions in which the mid-layer will
|
|
* continue to try to communicate to the LUN and evntually create a dummy LUN.
|
|
*/
|
|
if (hd->mpt_pq_filter && dlen && (data[0] & 0xE0))
|
|
data[0] |= 0x40;
|
|
|
|
/* Is LUN supported? If so, upper 2 bits will be 0
|
|
* in first byte of inquiry data.
|
|
*/
|
|
if (data[0] & 0xe0)
|
|
return;
|
|
|
|
if ((vdev = hd->Targets[target_id]) == NULL) {
|
|
return;
|
|
}
|
|
|
|
lun_index = (lun >> 5); /* 32 luns per lun_index */
|
|
indexed_lun = (lun % 32);
|
|
vdev->luns[lun_index] |= (1 << indexed_lun);
|
|
|
|
if (hd->ioc->bus_type == SCSI) {
|
|
if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
|
|
/* Treat all Processors as SAF-TE if
|
|
* command line option is set */
|
|
vdev->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
|
|
mptscsih_writeIOCPage4(hd, target_id, bus_id);
|
|
}else if ((data[0] == TYPE_PROCESSOR) &&
|
|
!(vdev->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
|
|
if ( dlen > 49 ) {
|
|
vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
|
|
if ( data[44] == 'S' &&
|
|
data[45] == 'A' &&
|
|
data[46] == 'F' &&
|
|
data[47] == '-' &&
|
|
data[48] == 'T' &&
|
|
data[49] == 'E' ) {
|
|
vdev->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
|
|
mptscsih_writeIOCPage4(hd, target_id, bus_id);
|
|
}
|
|
}
|
|
}
|
|
if (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY)) {
|
|
if ( dlen > 8 ) {
|
|
memcpy (vdev->inq_data, data, 8);
|
|
} else {
|
|
memcpy (vdev->inq_data, data, dlen);
|
|
}
|
|
|
|
/* If have not done DV, set the DV flag.
|
|
*/
|
|
pSpi = &hd->ioc->spi_data;
|
|
if ((data[0] == TYPE_TAPE) || (data[0] == TYPE_PROCESSOR)) {
|
|
if (pSpi->dvStatus[target_id] & MPT_SCSICFG_DV_NOT_DONE)
|
|
pSpi->dvStatus[target_id] |= MPT_SCSICFG_NEED_DV;
|
|
}
|
|
|
|
vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
|
|
|
|
|
|
data_56 = 0x0F; /* Default to full capabilities if Inq data length is < 57 */
|
|
if (dlen > 56) {
|
|
if ( (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_56))) {
|
|
/* Update the target capabilities
|
|
*/
|
|
data_56 = data[56];
|
|
vdev->tflags |= MPT_TARGET_FLAGS_VALID_56;
|
|
}
|
|
}
|
|
mptscsih_setTargetNegoParms(hd, vdev, data_56);
|
|
} else {
|
|
/* Initial Inquiry may not request enough data bytes to
|
|
* obtain byte 57. DV will; if target doesn't return
|
|
* at least 57 bytes, data[56] will be zero. */
|
|
if (dlen > 56) {
|
|
if ( (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_56))) {
|
|
/* Update the target capabilities
|
|
*/
|
|
data_56 = data[56];
|
|
vdev->tflags |= MPT_TARGET_FLAGS_VALID_56;
|
|
mptscsih_setTargetNegoParms(hd, vdev, data_56);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* Update the target negotiation parameters based on the
|
|
* the Inquiry data, adapter capabilities, and NVRAM settings.
|
|
*
|
|
*/
|
|
static void
|
|
mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56)
|
|
{
|
|
SpiCfgData *pspi_data = &hd->ioc->spi_data;
|
|
int id = (int) target->target_id;
|
|
int nvram;
|
|
VirtDevice *vdev;
|
|
int ii;
|
|
u8 width = MPT_NARROW;
|
|
u8 factor = MPT_ASYNC;
|
|
u8 offset = 0;
|
|
u8 version, nfactor;
|
|
u8 noQas = 1;
|
|
|
|
target->negoFlags = pspi_data->noQas;
|
|
|
|
/* noQas == 0 => device supports QAS. Need byte 56 of Inq to determine
|
|
* support. If available, default QAS to off and allow enabling.
|
|
* If not available, default QAS to on, turn off for non-disks.
|
|
*/
|
|
|
|
/* Set flags based on Inquiry data
|
|
*/
|
|
version = target->inq_data[2] & 0x07;
|
|
if (version < 2) {
|
|
width = 0;
|
|
factor = MPT_ULTRA2;
|
|
offset = pspi_data->maxSyncOffset;
|
|
target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
|
|
} else {
|
|
if (target->inq_data[7] & 0x20) {
|
|
width = 1;
|
|
}
|
|
|
|
if (target->inq_data[7] & 0x10) {
|
|
factor = pspi_data->minSyncFactor;
|
|
if (target->tflags & MPT_TARGET_FLAGS_VALID_56) {
|
|
/* bits 2 & 3 show Clocking support */
|
|
if ((byte56 & 0x0C) == 0)
|
|
factor = MPT_ULTRA2;
|
|
else {
|
|
if ((byte56 & 0x03) == 0)
|
|
factor = MPT_ULTRA160;
|
|
else {
|
|
factor = MPT_ULTRA320;
|
|
if (byte56 & 0x02)
|
|
{
|
|
ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id));
|
|
noQas = 0;
|
|
}
|
|
if (target->inq_data[0] == TYPE_TAPE) {
|
|
if (byte56 & 0x01)
|
|
target->negoFlags |= MPT_TAPE_NEGO_IDP;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
ddvtprintk((KERN_INFO "Enabling QAS on id=%d due to ~TARGET_FLAGS_VALID_56!\n", id));
|
|
noQas = 0;
|
|
}
|
|
|
|
offset = pspi_data->maxSyncOffset;
|
|
|
|
/* If RAID, never disable QAS
|
|
* else if non RAID, do not disable
|
|
* QAS if bit 1 is set
|
|
* bit 1 QAS support, non-raid only
|
|
* bit 0 IU support
|
|
*/
|
|
if (target->raidVolume == 1) {
|
|
noQas = 0;
|
|
}
|
|
} else {
|
|
factor = MPT_ASYNC;
|
|
offset = 0;
|
|
}
|
|
}
|
|
|
|
if ( (target->inq_data[7] & 0x02) == 0) {
|
|
target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
|
|
}
|
|
|
|
/* Update tflags based on NVRAM settings. (SCSI only)
|
|
*/
|
|
if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
|
|
nvram = pspi_data->nvram[id];
|
|
nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
|
|
|
|
if (width)
|
|
width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
|
|
|
|
if (offset > 0) {
|
|
/* Ensure factor is set to the
|
|
* maximum of: adapter, nvram, inquiry
|
|
*/
|
|
if (nfactor) {
|
|
if (nfactor < pspi_data->minSyncFactor )
|
|
nfactor = pspi_data->minSyncFactor;
|
|
|
|
factor = max(factor, nfactor);
|
|
if (factor == MPT_ASYNC)
|
|
offset = 0;
|
|
} else {
|
|
offset = 0;
|
|
factor = MPT_ASYNC;
|
|
}
|
|
} else {
|
|
factor = MPT_ASYNC;
|
|
}
|
|
}
|
|
|
|
/* Make sure data is consistent
|
|
*/
|
|
if ((!width) && (factor < MPT_ULTRA2)) {
|
|
factor = MPT_ULTRA2;
|
|
}
|
|
|
|
/* Save the data to the target structure.
|
|
*/
|
|
target->minSyncFactor = factor;
|
|
target->maxOffset = offset;
|
|
target->maxWidth = width;
|
|
|
|
target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
|
|
|
|
/* Disable unused features.
|
|
*/
|
|
if (!width)
|
|
target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
|
|
|
|
if (!offset)
|
|
target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
|
|
|
|
if ( factor > MPT_ULTRA320 )
|
|
noQas = 0;
|
|
|
|
/* GEM, processor WORKAROUND
|
|
*/
|
|
if ((target->inq_data[0] == TYPE_PROCESSOR) || (target->inq_data[0] > 0x08)) {
|
|
target->negoFlags |= (MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC);
|
|
pspi_data->dvStatus[id] |= MPT_SCSICFG_BLK_NEGO;
|
|
} else {
|
|
if (noQas && (pspi_data->noQas == 0)) {
|
|
pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
|
|
target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
|
|
|
|
/* Disable QAS in a mixed configuration case
|
|
*/
|
|
|
|
ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
|
|
for (ii = 0; ii < id; ii++) {
|
|
if ( (vdev = hd->Targets[ii]) ) {
|
|
vdev->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
|
|
mptscsih_writeSDP1(hd, 0, ii, vdev->negoFlags);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Write SDP1 on this I/O to this target */
|
|
if (pspi_data->dvStatus[id] & MPT_SCSICFG_NEGOTIATE) {
|
|
ddvtprintk((KERN_INFO "MPT_SCSICFG_NEGOTIATE on id=%d!\n", id));
|
|
mptscsih_writeSDP1(hd, 0, id, hd->negoNvram);
|
|
pspi_data->dvStatus[id] &= ~MPT_SCSICFG_NEGOTIATE;
|
|
} else if (pspi_data->dvStatus[id] & MPT_SCSICFG_BLK_NEGO) {
|
|
ddvtprintk((KERN_INFO "MPT_SCSICFG_BLK_NEGO on id=%d!\n", id));
|
|
mptscsih_writeSDP1(hd, 0, id, MPT_SCSICFG_BLK_NEGO);
|
|
pspi_data->dvStatus[id] &= ~MPT_SCSICFG_BLK_NEGO;
|
|
}
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return.
|
|
* Else set the NEED_DV flag after Read Capacity Issued (disks)
|
|
* or Mode Sense (cdroms).
|
|
*
|
|
* Tapes, initTarget will set this flag on completion of Inquiry command.
|
|
* Called only if DV_NOT_DONE flag is set
|
|
*/
|
|
static void
|
|
mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
|
|
{
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
u8 cmd;
|
|
SpiCfgData *pSpi;
|
|
|
|
ddvtprintk((MYIOC_s_NOTE_FMT
|
|
" set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
|
|
hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
|
|
|
|
if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0))
|
|
return;
|
|
|
|
cmd = pReq->CDB[0];
|
|
|
|
if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
|
|
pSpi = &ioc->spi_data;
|
|
if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) {
|
|
/* Set NEED_DV for all hidden disks
|
|
*/
|
|
Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
|
|
int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
|
|
|
|
while (numPDisk) {
|
|
pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
|
|
ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
|
|
pPDisk++;
|
|
numPDisk--;
|
|
}
|
|
}
|
|
pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV;
|
|
ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID));
|
|
}
|
|
}
|
|
|
|
/* mptscsih_raid_set_dv_flags()
|
|
*
|
|
* New or replaced disk. Set DV flag and schedule DV.
|
|
*/
|
|
static void
|
|
mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
|
|
{
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
SpiCfgData *pSpi = &ioc->spi_data;
|
|
Ioc3PhysDisk_t *pPDisk;
|
|
int numPDisk;
|
|
|
|
if (hd->negoNvram != 0)
|
|
return;
|
|
|
|
ddvtprintk(("DV requested for phys disk id %d\n", id));
|
|
if (ioc->raid_data.pIocPg3) {
|
|
pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
|
|
numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
|
|
while (numPDisk) {
|
|
if (id == pPDisk->PhysDiskNum) {
|
|
pSpi->dvStatus[pPDisk->PhysDiskID] =
|
|
(MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
|
|
pSpi->forceDv = MPT_SCSICFG_NEED_DV;
|
|
ddvtprintk(("NEED_DV set for phys disk id %d\n",
|
|
pPDisk->PhysDiskID));
|
|
break;
|
|
}
|
|
pPDisk++;
|
|
numPDisk--;
|
|
}
|
|
|
|
if (numPDisk == 0) {
|
|
/* The physical disk that needs DV was not found
|
|
* in the stored IOC Page 3. The driver must reload
|
|
* this page. DV routine will set the NEED_DV flag for
|
|
* all phys disks that have DV_NOT_DONE set.
|
|
*/
|
|
pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
|
|
ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
|
|
}
|
|
}
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* If no Target, bus reset on 1st I/O. Set the flag to
|
|
* prevent any future negotiations to this device.
|
|
*/
|
|
static void
|
|
mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id)
|
|
{
|
|
|
|
if ((hd->Targets) && (hd->Targets[target_id] == NULL))
|
|
hd->ioc->spi_data.dvStatus[target_id] |= MPT_SCSICFG_BLK_NEGO;
|
|
|
|
return;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* SCSI Config Page functionality ...
|
|
*/
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* mptscsih_setDevicePage1Flags - add Requested and Configuration fields flags
|
|
* based on width, factor and offset parameters.
|
|
* @width: bus width
|
|
* @factor: sync factor
|
|
* @offset: sync offset
|
|
* @requestedPtr: pointer to requested values (updated)
|
|
* @configurationPtr: pointer to configuration values (updated)
|
|
* @flags: flags to block WDTR or SDTR negotiation
|
|
*
|
|
* Return: None.
|
|
*
|
|
* Remark: Called by writeSDP1 and _dv_params
|
|
*/
|
|
static void
|
|
mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags)
|
|
{
|
|
u8 nowide = flags & MPT_TARGET_NO_NEGO_WIDE;
|
|
u8 nosync = flags & MPT_TARGET_NO_NEGO_SYNC;
|
|
|
|
*configurationPtr = 0;
|
|
*requestedPtr = width ? MPI_SCSIDEVPAGE1_RP_WIDE : 0;
|
|
*requestedPtr |= (offset << 16) | (factor << 8);
|
|
|
|
if (width && offset && !nowide && !nosync) {
|
|
if (factor < MPT_ULTRA160) {
|
|
*requestedPtr |= (MPI_SCSIDEVPAGE1_RP_IU + MPI_SCSIDEVPAGE1_RP_DT);
|
|
if ((flags & MPT_TARGET_NO_NEGO_QAS) == 0)
|
|
*requestedPtr |= MPI_SCSIDEVPAGE1_RP_QAS;
|
|
if (flags & MPT_TAPE_NEGO_IDP)
|
|
*requestedPtr |= 0x08000000;
|
|
} else if (factor < MPT_ULTRA2) {
|
|
*requestedPtr |= MPI_SCSIDEVPAGE1_RP_DT;
|
|
}
|
|
}
|
|
|
|
if (nowide)
|
|
*configurationPtr |= MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED;
|
|
|
|
if (nosync)
|
|
*configurationPtr |= MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED;
|
|
|
|
return;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* mptscsih_writeSDP1 - write SCSI Device Page 1
|
|
* @hd: Pointer to a SCSI Host Strucutre
|
|
* @portnum: IOC port number
|
|
* @target_id: writeSDP1 for single ID
|
|
* @flags: MPT_SCSICFG_ALL_IDS, MPT_SCSICFG_USE_NVRAM, MPT_SCSICFG_BLK_NEGO
|
|
*
|
|
* Return: -EFAULT if read of config page header fails
|
|
* or 0 if success.
|
|
*
|
|
* Remark: If a target has been found, the settings from the
|
|
* target structure are used, else the device is set
|
|
* to async/narrow.
|
|
*
|
|
* Remark: Called during init and after a FW reload.
|
|
* Remark: We do not wait for a return, write pages sequentially.
|
|
*/
|
|
static int
|
|
mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
|
|
{
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
Config_t *pReq;
|
|
SCSIDevicePage1_t *pData;
|
|
VirtDevice *pTarget=NULL;
|
|
MPT_FRAME_HDR *mf;
|
|
dma_addr_t dataDma;
|
|
u16 req_idx;
|
|
u32 frameOffset;
|
|
u32 requested, configuration, flagsLength;
|
|
int ii, nvram;
|
|
int id = 0, maxid = 0;
|
|
u8 width;
|
|
u8 factor;
|
|
u8 offset;
|
|
u8 bus = 0;
|
|
u8 negoFlags;
|
|
u8 maxwidth, maxoffset, maxfactor;
|
|
|
|
if (ioc->spi_data.sdp1length == 0)
|
|
return 0;
|
|
|
|
if (flags & MPT_SCSICFG_ALL_IDS) {
|
|
id = 0;
|
|
maxid = ioc->sh->max_id - 1;
|
|
} else if (ioc->sh) {
|
|
id = target_id;
|
|
maxid = min_t(int, id, ioc->sh->max_id - 1);
|
|
}
|
|
|
|
for (; id <= maxid; id++) {
|
|
|
|
if (id == ioc->pfacts[portnum].PortSCSIID)
|
|
continue;
|
|
|
|
/* Use NVRAM to get adapter and target maximums
|
|
* Data over-riden by target structure information, if present
|
|
*/
|
|
maxwidth = ioc->spi_data.maxBusWidth;
|
|
maxoffset = ioc->spi_data.maxSyncOffset;
|
|
maxfactor = ioc->spi_data.minSyncFactor;
|
|
if (ioc->spi_data.nvram && (ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
|
|
nvram = ioc->spi_data.nvram[id];
|
|
|
|
if (maxwidth)
|
|
maxwidth = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
|
|
|
|
if (maxoffset > 0) {
|
|
maxfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
|
|
if (maxfactor == 0) {
|
|
/* Key for async */
|
|
maxfactor = MPT_ASYNC;
|
|
maxoffset = 0;
|
|
} else if (maxfactor < ioc->spi_data.minSyncFactor) {
|
|
maxfactor = ioc->spi_data.minSyncFactor;
|
|
}
|
|
} else
|
|
maxfactor = MPT_ASYNC;
|
|
}
|
|
|
|
/* Set the negotiation flags.
|
|
*/
|
|
negoFlags = ioc->spi_data.noQas;
|
|
if (!maxwidth)
|
|
negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
|
|
|
|
if (!maxoffset)
|
|
negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
|
|
|
|
if (flags & MPT_SCSICFG_USE_NVRAM) {
|
|
width = maxwidth;
|
|
factor = maxfactor;
|
|
offset = maxoffset;
|
|
} else {
|
|
width = 0;
|
|
factor = MPT_ASYNC;
|
|
offset = 0;
|
|
//negoFlags = 0;
|
|
//negoFlags = MPT_TARGET_NO_NEGO_SYNC;
|
|
}
|
|
|
|
/* If id is not a raid volume, get the updated
|
|
* transmission settings from the target structure.
|
|
*/
|
|
if (hd->Targets && (pTarget = hd->Targets[id]) && !pTarget->raidVolume) {
|
|
width = pTarget->maxWidth;
|
|
factor = pTarget->minSyncFactor;
|
|
offset = pTarget->maxOffset;
|
|
negoFlags = pTarget->negoFlags;
|
|
}
|
|
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
/* Force to async and narrow if DV has not been executed
|
|
* for this ID
|
|
*/
|
|
if ((hd->ioc->spi_data.dvStatus[id] & MPT_SCSICFG_DV_NOT_DONE) != 0) {
|
|
width = 0;
|
|
factor = MPT_ASYNC;
|
|
offset = 0;
|
|
}
|
|
#endif
|
|
|
|
if (flags & MPT_SCSICFG_BLK_NEGO)
|
|
negoFlags |= MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC;
|
|
|
|
mptscsih_setDevicePage1Flags(width, factor, offset,
|
|
&requested, &configuration, negoFlags);
|
|
dnegoprintk(("writeSDP1: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
|
|
target_id, width, factor, offset, negoFlags, requested, configuration));
|
|
|
|
/* Get a MF for this command.
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
|
|
dfailprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
|
|
ioc->name));
|
|
return -EAGAIN;
|
|
}
|
|
|
|
ddvprintk((MYIOC_s_INFO_FMT "WriteSDP1 (mf=%p, id=%d, req=0x%x, cfg=0x%x)\n",
|
|
hd->ioc->name, mf, id, requested, configuration));
|
|
|
|
|
|
/* Set the request and the data pointers.
|
|
* Request takes: 36 bytes (32 bit SGE)
|
|
* SCSI Device Page 1 requires 16 bytes
|
|
* 40 + 16 <= size of SCSI IO Request = 56 bytes
|
|
* and MF size >= 64 bytes.
|
|
* Place data at end of MF.
|
|
*/
|
|
pReq = (Config_t *)mf;
|
|
|
|
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
frameOffset = ioc->req_sz - sizeof(SCSIDevicePage1_t);
|
|
|
|
pData = (SCSIDevicePage1_t *)((u8 *) mf + frameOffset);
|
|
dataDma = ioc->req_frames_dma + (req_idx * ioc->req_sz) + frameOffset;
|
|
|
|
/* Complete the request frame (same for all requests).
|
|
*/
|
|
pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
|
|
pReq->Reserved = 0;
|
|
pReq->ChainOffset = 0;
|
|
pReq->Function = MPI_FUNCTION_CONFIG;
|
|
pReq->ExtPageLength = 0;
|
|
pReq->ExtPageType = 0;
|
|
pReq->MsgFlags = 0;
|
|
for (ii=0; ii < 8; ii++) {
|
|
pReq->Reserved2[ii] = 0;
|
|
}
|
|
pReq->Header.PageVersion = ioc->spi_data.sdp1version;
|
|
pReq->Header.PageLength = ioc->spi_data.sdp1length;
|
|
pReq->Header.PageNumber = 1;
|
|
pReq->Header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
|
|
pReq->PageAddress = cpu_to_le32(id | (bus << 8 ));
|
|
|
|
/* Add a SGE to the config request.
|
|
*/
|
|
flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | ioc->spi_data.sdp1length * 4;
|
|
|
|
mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
|
|
|
|
/* Set up the common data portion
|
|
*/
|
|
pData->Header.PageVersion = pReq->Header.PageVersion;
|
|
pData->Header.PageLength = pReq->Header.PageLength;
|
|
pData->Header.PageNumber = pReq->Header.PageNumber;
|
|
pData->Header.PageType = pReq->Header.PageType;
|
|
pData->RequestedParameters = cpu_to_le32(requested);
|
|
pData->Reserved = 0;
|
|
pData->Configuration = cpu_to_le32(configuration);
|
|
|
|
dprintk((MYIOC_s_INFO_FMT
|
|
"write SDP1: id %d pgaddr 0x%x req 0x%x config 0x%x\n",
|
|
ioc->name, id, (id | (bus<<8)),
|
|
requested, configuration));
|
|
|
|
mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* mptscsih_writeIOCPage4 - write IOC Page 4
|
|
* @hd: Pointer to a SCSI Host Structure
|
|
* @target_id: write IOC Page4 for this ID & Bus
|
|
*
|
|
* Return: -EAGAIN if unable to obtain a Message Frame
|
|
* or 0 if success.
|
|
*
|
|
* Remark: We do not wait for a return, write pages sequentially.
|
|
*/
|
|
static int
|
|
mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus)
|
|
{
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
Config_t *pReq;
|
|
IOCPage4_t *IOCPage4Ptr;
|
|
MPT_FRAME_HDR *mf;
|
|
dma_addr_t dataDma;
|
|
u16 req_idx;
|
|
u32 frameOffset;
|
|
u32 flagsLength;
|
|
int ii;
|
|
|
|
/* Get a MF for this command.
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
|
|
dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
|
|
ioc->name));
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Set the request and the data pointers.
|
|
* Place data at end of MF.
|
|
*/
|
|
pReq = (Config_t *)mf;
|
|
|
|
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
|
|
|
|
/* Complete the request frame (same for all requests).
|
|
*/
|
|
pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
|
|
pReq->Reserved = 0;
|
|
pReq->ChainOffset = 0;
|
|
pReq->Function = MPI_FUNCTION_CONFIG;
|
|
pReq->ExtPageLength = 0;
|
|
pReq->ExtPageType = 0;
|
|
pReq->MsgFlags = 0;
|
|
for (ii=0; ii < 8; ii++) {
|
|
pReq->Reserved2[ii] = 0;
|
|
}
|
|
|
|
IOCPage4Ptr = ioc->spi_data.pIocPg4;
|
|
dataDma = ioc->spi_data.IocPg4_dma;
|
|
ii = IOCPage4Ptr->ActiveSEP++;
|
|
IOCPage4Ptr->SEP[ii].SEPTargetID = target_id;
|
|
IOCPage4Ptr->SEP[ii].SEPBus = bus;
|
|
pReq->Header = IOCPage4Ptr->Header;
|
|
pReq->PageAddress = cpu_to_le32(target_id | (bus << 8 ));
|
|
|
|
/* Add a SGE to the config request.
|
|
*/
|
|
flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
|
|
(IOCPage4Ptr->Header.PageLength + ii) * 4;
|
|
|
|
mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
|
|
|
|
dinitprintk((MYIOC_s_INFO_FMT
|
|
"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
|
|
ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, target_id, bus));
|
|
|
|
mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* Bus Scan and Domain Validation functionality ...
|
|
*/
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/*
|
|
* mptscsih_scandv_complete - Scan and DV callback routine registered
|
|
* to Fustion MPT (base) driver.
|
|
*
|
|
* @ioc: Pointer to MPT_ADAPTER structure
|
|
* @mf: Pointer to original MPT request frame
|
|
* @mr: Pointer to MPT reply frame (NULL if TurboReply)
|
|
*
|
|
* This routine is called from mpt.c::mpt_interrupt() at the completion
|
|
* of any SCSI IO request.
|
|
* This routine is registered with the Fusion MPT (base) driver at driver
|
|
* load/init time via the mpt_register() API call.
|
|
*
|
|
* Returns 1 indicating alloc'd request frame ptr should be freed.
|
|
*
|
|
* Remark: Sets a completion code and (possibly) saves sense data
|
|
* in the IOC member localReply structure.
|
|
* Used ONLY for DV and other internal commands.
|
|
*/
|
|
int
|
|
mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
SCSIIORequest_t *pReq;
|
|
int completionCode;
|
|
u16 req_idx;
|
|
|
|
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
|
|
|
|
if ((mf == NULL) ||
|
|
(mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
|
|
printk(MYIOC_s_ERR_FMT
|
|
"ScanDvComplete, %s req frame ptr! (=%p)\n",
|
|
ioc->name, mf?"BAD":"NULL", (void *) mf);
|
|
goto wakeup;
|
|
}
|
|
|
|
del_timer(&hd->timer);
|
|
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
hd->ScsiLookup[req_idx] = NULL;
|
|
pReq = (SCSIIORequest_t *) mf;
|
|
|
|
if (mf != hd->cmdPtr) {
|
|
printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n",
|
|
hd->ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx);
|
|
}
|
|
hd->cmdPtr = NULL;
|
|
|
|
ddvprintk((MYIOC_s_INFO_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n",
|
|
hd->ioc->name, mf, mr, req_idx));
|
|
|
|
hd->pLocal = &hd->localReply;
|
|
hd->pLocal->scsiStatus = 0;
|
|
|
|
/* If target struct exists, clear sense valid flag.
|
|
*/
|
|
if (mr == NULL) {
|
|
completionCode = MPT_SCANDV_GOOD;
|
|
} else {
|
|
SCSIIOReply_t *pReply;
|
|
u16 status;
|
|
u8 scsi_status;
|
|
|
|
pReply = (SCSIIOReply_t *) mr;
|
|
|
|
status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
|
|
scsi_status = pReply->SCSIStatus;
|
|
|
|
ddvtprintk((KERN_NOTICE " IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh, IOCLogInfo=%08xh\n",
|
|
status, pReply->SCSIState, scsi_status,
|
|
le32_to_cpu(pReply->IOCLogInfo)));
|
|
|
|
switch(status) {
|
|
|
|
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
|
|
completionCode = MPT_SCANDV_SELECTION_TIMEOUT;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
|
|
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
|
|
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
|
|
case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
|
|
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
|
|
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
|
|
if (pReply->Function == MPI_FUNCTION_CONFIG) {
|
|
ConfigReply_t *pr = (ConfigReply_t *)mr;
|
|
completionCode = MPT_SCANDV_GOOD;
|
|
hd->pLocal->header.PageVersion = pr->Header.PageVersion;
|
|
hd->pLocal->header.PageLength = pr->Header.PageLength;
|
|
hd->pLocal->header.PageNumber = pr->Header.PageNumber;
|
|
hd->pLocal->header.PageType = pr->Header.PageType;
|
|
|
|
} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
|
|
/* If the RAID Volume request is successful,
|
|
* return GOOD, else indicate that
|
|
* some type of error occurred.
|
|
*/
|
|
MpiRaidActionReply_t *pr = (MpiRaidActionReply_t *)mr;
|
|
if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
|
|
completionCode = MPT_SCANDV_GOOD;
|
|
else
|
|
completionCode = MPT_SCANDV_SOME_ERROR;
|
|
|
|
} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
|
|
u8 *sense_data;
|
|
int sz;
|
|
|
|
/* save sense data in global structure
|
|
*/
|
|
completionCode = MPT_SCANDV_SENSE;
|
|
hd->pLocal->scsiStatus = scsi_status;
|
|
sense_data = ((u8 *)hd->ioc->sense_buf_pool +
|
|
(req_idx * MPT_SENSE_BUFFER_ALLOC));
|
|
|
|
sz = min_t(int, pReq->SenseBufferLength,
|
|
SCSI_STD_SENSE_BYTES);
|
|
memcpy(hd->pLocal->sense, sense_data, sz);
|
|
|
|
ddvprintk((KERN_NOTICE " Check Condition, sense ptr %p\n",
|
|
sense_data));
|
|
} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
|
|
if (pReq->CDB[0] == INQUIRY)
|
|
completionCode = MPT_SCANDV_ISSUE_SENSE;
|
|
else
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
}
|
|
else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
else {
|
|
completionCode = MPT_SCANDV_GOOD;
|
|
hd->pLocal->scsiStatus = scsi_status;
|
|
}
|
|
break;
|
|
|
|
case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
|
|
if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
|
|
completionCode = MPT_SCANDV_DID_RESET;
|
|
else
|
|
completionCode = MPT_SCANDV_SOME_ERROR;
|
|
break;
|
|
|
|
default:
|
|
completionCode = MPT_SCANDV_SOME_ERROR;
|
|
break;
|
|
|
|
} /* switch(status) */
|
|
|
|
ddvtprintk((KERN_NOTICE " completionCode set to %08xh\n",
|
|
completionCode));
|
|
} /* end of address reply case */
|
|
|
|
hd->pLocal->completion = completionCode;
|
|
|
|
/* MF and RF are freed in mpt_interrupt
|
|
*/
|
|
wakeup:
|
|
/* Free Chain buffers (will never chain) in scan or dv */
|
|
//mptscsih_freeChainBuffers(ioc, req_idx);
|
|
|
|
/*
|
|
* Wake up the original calling thread
|
|
*/
|
|
hd->scandv_wait_done = 1;
|
|
wake_up(&hd->scandv_waitq);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* mptscsih_timer_expired - Call back for timer process.
|
|
* Used only for dv functionality.
|
|
* @data: Pointer to MPT_SCSI_HOST recast as an unsigned long
|
|
*
|
|
*/
|
|
void
|
|
mptscsih_timer_expired(unsigned long data)
|
|
{
|
|
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) data;
|
|
|
|
ddvprintk((MYIOC_s_WARN_FMT "Timer Expired! Cmd %p\n", hd->ioc->name, hd->cmdPtr));
|
|
|
|
if (hd->cmdPtr) {
|
|
MPIHeader_t *cmd = (MPIHeader_t *)hd->cmdPtr;
|
|
|
|
if (cmd->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
|
|
/* Desire to issue a task management request here.
|
|
* TM requests MUST be single threaded.
|
|
* If old eh code and no TM current, issue request.
|
|
* If new eh code, do nothing. Wait for OS cmd timeout
|
|
* for bus reset.
|
|
*/
|
|
ddvtprintk((MYIOC_s_NOTE_FMT "DV Cmd Timeout: NoOp\n", hd->ioc->name));
|
|
} else {
|
|
/* Perform a FW reload */
|
|
if (mpt_HardResetHandler(hd->ioc, NO_SLEEP) < 0) {
|
|
printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", hd->ioc->name);
|
|
}
|
|
}
|
|
} else {
|
|
/* This should NEVER happen */
|
|
printk(MYIOC_s_WARN_FMT "Null cmdPtr!!!!\n", hd->ioc->name);
|
|
}
|
|
|
|
/* No more processing.
|
|
* TM call will generate an interrupt for SCSI TM Management.
|
|
* The FW will reply to all outstanding commands, callback will finish cleanup.
|
|
* Hard reset clean-up will free all resources.
|
|
*/
|
|
ddvprintk((MYIOC_s_WARN_FMT "Timer Expired Complete!\n", hd->ioc->name));
|
|
|
|
return;
|
|
}
|
|
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* mptscsih_do_raid - Format and Issue a RAID volume request message.
|
|
* @hd: Pointer to scsi host structure
|
|
* @action: What do be done.
|
|
* @id: Logical target id.
|
|
* @bus: Target locations bus.
|
|
*
|
|
* Returns: < 0 on a fatal error
|
|
* 0 on success
|
|
*
|
|
* Remark: Wait to return until reply processed by the ISR.
|
|
*/
|
|
static int
|
|
mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io)
|
|
{
|
|
MpiRaidActionRequest_t *pReq;
|
|
MPT_FRAME_HDR *mf;
|
|
int in_isr;
|
|
|
|
in_isr = in_interrupt();
|
|
if (in_isr) {
|
|
dprintk((MYIOC_s_WARN_FMT "Internal raid request not allowed in ISR context!\n",
|
|
hd->ioc->name));
|
|
return -EPERM;
|
|
}
|
|
|
|
/* Get and Populate a free Frame
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
|
|
ddvprintk((MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
|
|
hd->ioc->name));
|
|
return -EAGAIN;
|
|
}
|
|
pReq = (MpiRaidActionRequest_t *)mf;
|
|
pReq->Action = action;
|
|
pReq->Reserved1 = 0;
|
|
pReq->ChainOffset = 0;
|
|
pReq->Function = MPI_FUNCTION_RAID_ACTION;
|
|
pReq->VolumeID = io->id;
|
|
pReq->VolumeBus = io->bus;
|
|
pReq->PhysDiskNum = io->physDiskNum;
|
|
pReq->MsgFlags = 0;
|
|
pReq->Reserved2 = 0;
|
|
pReq->ActionDataWord = 0; /* Reserved for this action */
|
|
//pReq->ActionDataSGE = 0;
|
|
|
|
mpt_add_sge((char *)&pReq->ActionDataSGE,
|
|
MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
|
|
|
|
ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action %x id %d\n",
|
|
hd->ioc->name, action, io->id));
|
|
|
|
hd->pLocal = NULL;
|
|
hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
|
|
hd->scandv_wait_done = 0;
|
|
|
|
/* Save cmd pointer, for resource free if timeout or
|
|
* FW reload occurs
|
|
*/
|
|
hd->cmdPtr = mf;
|
|
|
|
add_timer(&hd->timer);
|
|
mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf);
|
|
wait_event(hd->scandv_waitq, hd->scandv_wait_done);
|
|
|
|
if ((hd->pLocal == NULL) || (hd->pLocal->completion != MPT_SCANDV_GOOD))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_do_cmd - Do internal command.
|
|
* @hd: MPT_SCSI_HOST pointer
|
|
* @io: INTERNAL_CMD pointer.
|
|
*
|
|
* Issue the specified internally generated command and do command
|
|
* specific cleanup. For bus scan / DV only.
|
|
* NOTES: If command is Inquiry and status is good,
|
|
* initialize a target structure, save the data
|
|
*
|
|
* Remark: Single threaded access only.
|
|
*
|
|
* Return:
|
|
* < 0 if an illegal command or no resources
|
|
*
|
|
* 0 if good
|
|
*
|
|
* > 0 if command complete but some type of completion error.
|
|
*/
|
|
static int
|
|
mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
|
|
{
|
|
MPT_FRAME_HDR *mf;
|
|
SCSIIORequest_t *pScsiReq;
|
|
SCSIIORequest_t ReqCopy;
|
|
int my_idx, ii, dir;
|
|
int rc, cmdTimeout;
|
|
int in_isr;
|
|
char cmdLen;
|
|
char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
|
|
char cmd = io->cmd;
|
|
|
|
in_isr = in_interrupt();
|
|
if (in_isr) {
|
|
dprintk((MYIOC_s_WARN_FMT "Internal SCSI IO request not allowed in ISR context!\n",
|
|
hd->ioc->name));
|
|
return -EPERM;
|
|
}
|
|
|
|
|
|
/* Set command specific information
|
|
*/
|
|
switch (cmd) {
|
|
case INQUIRY:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
CDB[4] = io->size;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case TEST_UNIT_READY:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case START_STOP:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
CDB[4] = 1; /*Spin up the disk */
|
|
cmdTimeout = 15;
|
|
break;
|
|
|
|
case REQUEST_SENSE:
|
|
cmdLen = 6;
|
|
CDB[0] = cmd;
|
|
CDB[4] = io->size;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case READ_BUFFER:
|
|
cmdLen = 10;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
if (io->flags & MPT_ICFLAG_ECHO) {
|
|
CDB[1] = 0x0A;
|
|
} else {
|
|
CDB[1] = 0x02;
|
|
}
|
|
|
|
if (io->flags & MPT_ICFLAG_BUF_CAP) {
|
|
CDB[1] |= 0x01;
|
|
}
|
|
CDB[6] = (io->size >> 16) & 0xFF;
|
|
CDB[7] = (io->size >> 8) & 0xFF;
|
|
CDB[8] = io->size & 0xFF;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case WRITE_BUFFER:
|
|
cmdLen = 10;
|
|
dir = MPI_SCSIIO_CONTROL_WRITE;
|
|
CDB[0] = cmd;
|
|
if (io->flags & MPT_ICFLAG_ECHO) {
|
|
CDB[1] = 0x0A;
|
|
} else {
|
|
CDB[1] = 0x02;
|
|
}
|
|
CDB[6] = (io->size >> 16) & 0xFF;
|
|
CDB[7] = (io->size >> 8) & 0xFF;
|
|
CDB[8] = io->size & 0xFF;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case RESERVE:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case RELEASE:
|
|
cmdLen = 6;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
case SYNCHRONIZE_CACHE:
|
|
cmdLen = 10;
|
|
dir = MPI_SCSIIO_CONTROL_READ;
|
|
CDB[0] = cmd;
|
|
// CDB[1] = 0x02; /* set immediate bit */
|
|
cmdTimeout = 10;
|
|
break;
|
|
|
|
default:
|
|
/* Error Case */
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* Get and Populate a free Frame
|
|
*/
|
|
if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
|
|
ddvprintk((MYIOC_s_WARN_FMT "No msg frames!\n",
|
|
hd->ioc->name));
|
|
return -EBUSY;
|
|
}
|
|
|
|
pScsiReq = (SCSIIORequest_t *) mf;
|
|
|
|
/* Get the request index */
|
|
my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
|
|
ADD_INDEX_LOG(my_idx); /* for debug */
|
|
|
|
if (io->flags & MPT_ICFLAG_PHYS_DISK) {
|
|
pScsiReq->TargetID = io->physDiskNum;
|
|
pScsiReq->Bus = 0;
|
|
pScsiReq->ChainOffset = 0;
|
|
pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
|
|
} else {
|
|
pScsiReq->TargetID = io->id;
|
|
pScsiReq->Bus = io->bus;
|
|
pScsiReq->ChainOffset = 0;
|
|
pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
|
|
}
|
|
|
|
pScsiReq->CDBLength = cmdLen;
|
|
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
|
|
|
|
pScsiReq->Reserved = 0;
|
|
|
|
pScsiReq->MsgFlags = mpt_msg_flags();
|
|
/* MsgContext set in mpt_get_msg_fram call */
|
|
|
|
for (ii=0; ii < 8; ii++)
|
|
pScsiReq->LUN[ii] = 0;
|
|
pScsiReq->LUN[1] = io->lun;
|
|
|
|
if (io->flags & MPT_ICFLAG_TAGGED_CMD)
|
|
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
|
|
else
|
|
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
|
|
|
|
if (cmd == REQUEST_SENSE) {
|
|
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
|
|
ddvprintk((MYIOC_s_INFO_FMT "Untagged! 0x%2x\n",
|
|
hd->ioc->name, cmd));
|
|
}
|
|
|
|
for (ii=0; ii < 16; ii++)
|
|
pScsiReq->CDB[ii] = CDB[ii];
|
|
|
|
pScsiReq->DataLength = cpu_to_le32(io->size);
|
|
pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma
|
|
+ (my_idx * MPT_SENSE_BUFFER_ALLOC));
|
|
|
|
ddvprintk((MYIOC_s_INFO_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
|
|
hd->ioc->name, cmd, io->bus, io->id, io->lun));
|
|
|
|
if (dir == MPI_SCSIIO_CONTROL_READ) {
|
|
mpt_add_sge((char *) &pScsiReq->SGL,
|
|
MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
|
|
io->data_dma);
|
|
} else {
|
|
mpt_add_sge((char *) &pScsiReq->SGL,
|
|
MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
|
|
io->data_dma);
|
|
}
|
|
|
|
/* The ISR will free the request frame, but we need
|
|
* the information to initialize the target. Duplicate.
|
|
*/
|
|
memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t));
|
|
|
|
/* Issue this command after:
|
|
* finish init
|
|
* add timer
|
|
* Wait until the reply has been received
|
|
* ScsiScanDvCtx callback function will
|
|
* set hd->pLocal;
|
|
* set scandv_wait_done and call wake_up
|
|
*/
|
|
hd->pLocal = NULL;
|
|
hd->timer.expires = jiffies + HZ*cmdTimeout;
|
|
hd->scandv_wait_done = 0;
|
|
|
|
/* Save cmd pointer, for resource free if timeout or
|
|
* FW reload occurs
|
|
*/
|
|
hd->cmdPtr = mf;
|
|
|
|
add_timer(&hd->timer);
|
|
mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf);
|
|
wait_event(hd->scandv_waitq, hd->scandv_wait_done);
|
|
|
|
if (hd->pLocal) {
|
|
rc = hd->pLocal->completion;
|
|
hd->pLocal->skip = 0;
|
|
|
|
/* Always set fatal error codes in some cases.
|
|
*/
|
|
if (rc == MPT_SCANDV_SELECTION_TIMEOUT)
|
|
rc = -ENXIO;
|
|
else if (rc == MPT_SCANDV_SOME_ERROR)
|
|
rc = -rc;
|
|
} else {
|
|
rc = -EFAULT;
|
|
/* This should never happen. */
|
|
ddvprintk((MYIOC_s_INFO_FMT "_do_cmd: Null pLocal!!!\n",
|
|
hd->ioc->name));
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
|
|
* @hd: Pointer to MPT_SCSI_HOST structure
|
|
* @portnum: IOC port number
|
|
*
|
|
* Uses the ISR, but with special processing.
|
|
* MUST be single-threaded.
|
|
*
|
|
* Return: 0 on completion
|
|
*/
|
|
static int
|
|
mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
|
|
{
|
|
MPT_ADAPTER *ioc= hd->ioc;
|
|
VirtDevice *pTarget;
|
|
SCSIDevicePage1_t *pcfg1Data = NULL;
|
|
INTERNAL_CMD iocmd;
|
|
CONFIGPARMS cfg;
|
|
dma_addr_t cfg1_dma_addr = -1;
|
|
ConfigPageHeader_t header1;
|
|
int bus = 0;
|
|
int id = 0;
|
|
int lun;
|
|
int indexed_lun, lun_index;
|
|
int hostId = ioc->pfacts[portnum].PortSCSIID;
|
|
int max_id;
|
|
int requested, configuration, data;
|
|
int doConfig = 0;
|
|
u8 flags, factor;
|
|
|
|
max_id = ioc->sh->max_id - 1;
|
|
|
|
/* Following parameters will not change
|
|
* in this routine.
|
|
*/
|
|
iocmd.cmd = SYNCHRONIZE_CACHE;
|
|
iocmd.flags = 0;
|
|
iocmd.physDiskNum = -1;
|
|
iocmd.data = NULL;
|
|
iocmd.data_dma = -1;
|
|
iocmd.size = 0;
|
|
iocmd.rsvd = iocmd.rsvd2 = 0;
|
|
|
|
/* No SCSI hosts
|
|
*/
|
|
if (hd->Targets == NULL)
|
|
return 0;
|
|
|
|
/* Skip the host
|
|
*/
|
|
if (id == hostId)
|
|
id++;
|
|
|
|
/* Write SDP1 for all SCSI devices
|
|
* Alloc memory and set up config buffer
|
|
*/
|
|
if (ioc->bus_type == SCSI) {
|
|
if (ioc->spi_data.sdp1length > 0) {
|
|
pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev,
|
|
ioc->spi_data.sdp1length * 4, &cfg1_dma_addr);
|
|
|
|
if (pcfg1Data != NULL) {
|
|
doConfig = 1;
|
|
header1.PageVersion = ioc->spi_data.sdp1version;
|
|
header1.PageLength = ioc->spi_data.sdp1length;
|
|
header1.PageNumber = 1;
|
|
header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
|
|
cfg.cfghdr.hdr = &header1;
|
|
cfg.physAddr = cfg1_dma_addr;
|
|
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
|
|
cfg.dir = 1;
|
|
cfg.timeout = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* loop through all devices on this port
|
|
*/
|
|
while (bus < MPT_MAX_BUS) {
|
|
iocmd.bus = bus;
|
|
iocmd.id = id;
|
|
pTarget = hd->Targets[(int)id];
|
|
|
|
if (doConfig) {
|
|
|
|
/* Set the negotiation flags */
|
|
if (pTarget && (pTarget = hd->Targets[id]) && !pTarget->raidVolume) {
|
|
flags = pTarget->negoFlags;
|
|
} else {
|
|
flags = hd->ioc->spi_data.noQas;
|
|
if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
|
|
data = hd->ioc->spi_data.nvram[id];
|
|
|
|
if (data & MPT_NVRAM_WIDE_DISABLE)
|
|
flags |= MPT_TARGET_NO_NEGO_WIDE;
|
|
|
|
factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
|
|
if ((factor == 0) || (factor == MPT_ASYNC))
|
|
flags |= MPT_TARGET_NO_NEGO_SYNC;
|
|
}
|
|
}
|
|
|
|
/* Force to async, narrow */
|
|
mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
|
|
&configuration, flags);
|
|
dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
|
|
"offset=0 negoFlags=%x request=%x config=%x\n",
|
|
id, flags, requested, configuration));
|
|
pcfg1Data->RequestedParameters = cpu_to_le32(requested);
|
|
pcfg1Data->Reserved = 0;
|
|
pcfg1Data->Configuration = cpu_to_le32(configuration);
|
|
cfg.pageAddr = (bus<<8) | id;
|
|
mpt_config(hd->ioc, &cfg);
|
|
}
|
|
|
|
/* If target Ptr NULL or if this target is NOT a disk, skip.
|
|
*/
|
|
if ((pTarget) && (pTarget->inq_data[0] == TYPE_DISK)){
|
|
for (lun=0; lun <= MPT_LAST_LUN; lun++) {
|
|
/* If LUN present, issue the command
|
|
*/
|
|
lun_index = (lun >> 5); /* 32 luns per lun_index */
|
|
indexed_lun = (lun % 32);
|
|
if (pTarget->luns[lun_index] & (1<<indexed_lun)) {
|
|
iocmd.lun = lun;
|
|
(void) mptscsih_do_cmd(hd, &iocmd);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* get next relevant device */
|
|
id++;
|
|
|
|
if (id == hostId)
|
|
id++;
|
|
|
|
if (id > max_id) {
|
|
id = 0;
|
|
bus++;
|
|
}
|
|
}
|
|
|
|
if (pcfg1Data) {
|
|
pci_free_consistent(ioc->pcidev, header1.PageLength * 4, pcfg1Data, cfg1_dma_addr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_domainValidation - Top level handler for domain validation.
|
|
* @hd: Pointer to MPT_SCSI_HOST structure.
|
|
*
|
|
* Uses the ISR, but with special processing.
|
|
* Called from schedule, should not be in interrupt mode.
|
|
* While thread alive, do dv for all devices needing dv
|
|
*
|
|
* Return: None.
|
|
*/
|
|
static void
|
|
mptscsih_domainValidation(void *arg)
|
|
{
|
|
MPT_SCSI_HOST *hd;
|
|
MPT_ADAPTER *ioc;
|
|
unsigned long flags;
|
|
int id, maxid, dvStatus, did;
|
|
int ii, isPhysDisk;
|
|
|
|
spin_lock_irqsave(&dvtaskQ_lock, flags);
|
|
dvtaskQ_active = 1;
|
|
if (dvtaskQ_release) {
|
|
dvtaskQ_active = 0;
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
return;
|
|
}
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
|
|
/* For this ioc, loop through all devices and do dv to each device.
|
|
* When complete with this ioc, search through the ioc list, and
|
|
* for each scsi ioc found, do dv for all devices. Exit when no
|
|
* device needs dv.
|
|
*/
|
|
did = 1;
|
|
while (did) {
|
|
did = 0;
|
|
list_for_each_entry(ioc, &ioc_list, list) {
|
|
spin_lock_irqsave(&dvtaskQ_lock, flags);
|
|
if (dvtaskQ_release) {
|
|
dvtaskQ_active = 0;
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
return;
|
|
}
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
|
|
msleep(250);
|
|
|
|
/* DV only to SCSI adapters */
|
|
if (ioc->bus_type != SCSI)
|
|
continue;
|
|
|
|
/* Make sure everything looks ok */
|
|
if (ioc->sh == NULL)
|
|
continue;
|
|
|
|
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
|
|
if (hd == NULL)
|
|
continue;
|
|
|
|
if ((ioc->spi_data.forceDv & MPT_SCSICFG_RELOAD_IOC_PG3) != 0) {
|
|
mpt_read_ioc_pg_3(ioc);
|
|
if (ioc->raid_data.pIocPg3) {
|
|
Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
|
|
int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
|
|
|
|
while (numPDisk) {
|
|
if (ioc->spi_data.dvStatus[pPDisk->PhysDiskID] & MPT_SCSICFG_DV_NOT_DONE)
|
|
ioc->spi_data.dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
|
|
|
|
pPDisk++;
|
|
numPDisk--;
|
|
}
|
|
}
|
|
ioc->spi_data.forceDv &= ~MPT_SCSICFG_RELOAD_IOC_PG3;
|
|
}
|
|
|
|
maxid = min_t(int, ioc->sh->max_id, MPT_MAX_SCSI_DEVICES);
|
|
|
|
for (id = 0; id < maxid; id++) {
|
|
spin_lock_irqsave(&dvtaskQ_lock, flags);
|
|
if (dvtaskQ_release) {
|
|
dvtaskQ_active = 0;
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
return;
|
|
}
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
dvStatus = hd->ioc->spi_data.dvStatus[id];
|
|
|
|
if (dvStatus & MPT_SCSICFG_NEED_DV) {
|
|
did++;
|
|
hd->ioc->spi_data.dvStatus[id] |= MPT_SCSICFG_DV_PENDING;
|
|
hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_NEED_DV;
|
|
|
|
msleep(250);
|
|
|
|
/* If hidden phys disk, block IO's to all
|
|
* raid volumes
|
|
* else, process normally
|
|
*/
|
|
isPhysDisk = mptscsih_is_phys_disk(ioc, id);
|
|
if (isPhysDisk) {
|
|
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
|
|
if (hd->ioc->raid_data.isRaid & (1 << ii)) {
|
|
hd->ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_DV_PENDING;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (mptscsih_doDv(hd, 0, id) == 1) {
|
|
/* Untagged device was busy, try again
|
|
*/
|
|
hd->ioc->spi_data.dvStatus[id] |= MPT_SCSICFG_NEED_DV;
|
|
hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_PENDING;
|
|
} else {
|
|
/* DV is complete. Clear flags.
|
|
*/
|
|
hd->ioc->spi_data.dvStatus[id] &= ~(MPT_SCSICFG_DV_NOT_DONE | MPT_SCSICFG_DV_PENDING);
|
|
}
|
|
|
|
if (isPhysDisk) {
|
|
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
|
|
if (hd->ioc->raid_data.isRaid & (1 << ii)) {
|
|
hd->ioc->spi_data.dvStatus[ii] &= ~MPT_SCSICFG_DV_PENDING;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (hd->ioc->spi_data.noQas)
|
|
mptscsih_qas_check(hd, id);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&dvtaskQ_lock, flags);
|
|
dvtaskQ_active = 0;
|
|
spin_unlock_irqrestore(&dvtaskQ_lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Search IOC page 3 to determine if this is hidden physical disk
|
|
*/
|
|
/* Search IOC page 3 to determine if this is hidden physical disk
|
|
*/
|
|
static int
|
|
mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
|
|
{
|
|
int i;
|
|
|
|
if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
|
|
return 0;
|
|
|
|
for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
|
|
if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write SDP1 if no QAS has been enabled
|
|
*/
|
|
static void
|
|
mptscsih_qas_check(MPT_SCSI_HOST *hd, int id)
|
|
{
|
|
VirtDevice *pTarget;
|
|
int ii;
|
|
|
|
if (hd->Targets == NULL)
|
|
return;
|
|
|
|
for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
|
|
if (ii == id)
|
|
continue;
|
|
|
|
if ((hd->ioc->spi_data.dvStatus[ii] & MPT_SCSICFG_DV_NOT_DONE) != 0)
|
|
continue;
|
|
|
|
pTarget = hd->Targets[ii];
|
|
|
|
if ((pTarget != NULL) && (!pTarget->raidVolume)) {
|
|
if ((pTarget->negoFlags & hd->ioc->spi_data.noQas) == 0) {
|
|
pTarget->negoFlags |= hd->ioc->spi_data.noQas;
|
|
dnegoprintk(("writeSDP1: id=%d flags=0\n", id));
|
|
mptscsih_writeSDP1(hd, 0, ii, 0);
|
|
}
|
|
} else {
|
|
if (mptscsih_is_phys_disk(hd->ioc, ii) == 1) {
|
|
dnegoprintk(("writeSDP1: id=%d SCSICFG_USE_NVRAM\n", id));
|
|
mptscsih_writeSDP1(hd, 0, ii, MPT_SCSICFG_USE_NVRAM);
|
|
}
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
|
|
#define MPT_GET_NVRAM_VALS 0x01
|
|
#define MPT_UPDATE_MAX 0x02
|
|
#define MPT_SET_MAX 0x04
|
|
#define MPT_SET_MIN 0x08
|
|
#define MPT_FALLBACK 0x10
|
|
#define MPT_SAVE 0x20
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/**
|
|
* mptscsih_doDv - Perform domain validation to a target.
|
|
* @hd: Pointer to MPT_SCSI_HOST structure.
|
|
* @portnum: IOC port number.
|
|
* @target: Physical ID of this target
|
|
*
|
|
* Uses the ISR, but with special processing.
|
|
* MUST be single-threaded.
|
|
* Test will exit if target is at async & narrow.
|
|
*
|
|
* Return: None.
|
|
*/
|
|
static int
|
|
mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
|
|
{
|
|
MPT_ADAPTER *ioc = hd->ioc;
|
|
VirtDevice *pTarget;
|
|
SCSIDevicePage1_t *pcfg1Data;
|
|
SCSIDevicePage0_t *pcfg0Data;
|
|
u8 *pbuf1;
|
|
u8 *pbuf2;
|
|
u8 *pDvBuf;
|
|
dma_addr_t dvbuf_dma = -1;
|
|
dma_addr_t buf1_dma = -1;
|
|
dma_addr_t buf2_dma = -1;
|
|
dma_addr_t cfg1_dma_addr = -1;
|
|
dma_addr_t cfg0_dma_addr = -1;
|
|
ConfigPageHeader_t header1;
|
|
ConfigPageHeader_t header0;
|
|
DVPARAMETERS dv;
|
|
INTERNAL_CMD iocmd;
|
|
CONFIGPARMS cfg;
|
|
int dv_alloc = 0;
|
|
int rc, sz = 0;
|
|
int bufsize = 0;
|
|
int dataBufSize = 0;
|
|
int echoBufSize = 0;
|
|
int notDone;
|
|
int patt;
|
|
int repeat;
|
|
int retcode = 0;
|
|
int nfactor = MPT_ULTRA320;
|
|
char firstPass = 1;
|
|
char doFallback = 0;
|
|
char readPage0;
|
|
char bus, lun;
|
|
char inq0 = 0;
|
|
|
|
if (ioc->spi_data.sdp1length == 0)
|
|
return 0;
|
|
|
|
if (ioc->spi_data.sdp0length == 0)
|
|
return 0;
|
|
|
|
/* If multiple buses are used, require that the initiator
|
|
* id be the same on all buses.
|
|
*/
|
|
if (id == ioc->pfacts[0].PortSCSIID)
|
|
return 0;
|
|
|
|
lun = 0;
|
|
bus = (u8) bus_number;
|
|
ddvtprintk((MYIOC_s_NOTE_FMT
|
|
"DV started: bus=%d, id=%d dv @ %p\n",
|
|
ioc->name, bus, id, &dv));
|
|
|
|
/* Prep DV structure
|
|
*/
|
|
memset (&dv, 0, sizeof(DVPARAMETERS));
|
|
dv.id = id;
|
|
|
|
/* Populate tmax with the current maximum
|
|
* transfer parameters for this target.
|
|
* Exit if narrow and async.
|
|
*/
|
|
dv.cmd = MPT_GET_NVRAM_VALS;
|
|
mptscsih_dv_parms(hd, &dv, NULL);
|
|
|
|
/* Prep SCSI IO structure
|
|
*/
|
|
iocmd.id = id;
|
|
iocmd.bus = bus;
|
|
iocmd.lun = lun;
|
|
iocmd.flags = 0;
|
|
iocmd.physDiskNum = -1;
|
|
iocmd.rsvd = iocmd.rsvd2 = 0;
|
|
|
|
pTarget = hd->Targets[id];
|
|
|
|
/* Use tagged commands if possible.
|
|
*/
|
|
if (pTarget) {
|
|
if (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)
|
|
iocmd.flags |= MPT_ICFLAG_TAGGED_CMD;
|
|
else {
|
|
if (hd->ioc->facts.FWVersion.Word < 0x01000600)
|
|
return 0;
|
|
|
|
if ((hd->ioc->facts.FWVersion.Word >= 0x01010000) &&
|
|
(hd->ioc->facts.FWVersion.Word < 0x01010B00))
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Prep cfg structure
|
|
*/
|
|
cfg.pageAddr = (bus<<8) | id;
|
|
cfg.cfghdr.hdr = NULL;
|
|
|
|
/* Prep SDP0 header
|
|
*/
|
|
header0.PageVersion = ioc->spi_data.sdp0version;
|
|
header0.PageLength = ioc->spi_data.sdp0length;
|
|
header0.PageNumber = 0;
|
|
header0.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
|
|
|
|
/* Prep SDP1 header
|
|
*/
|
|
header1.PageVersion = ioc->spi_data.sdp1version;
|
|
header1.PageLength = ioc->spi_data.sdp1length;
|
|
header1.PageNumber = 1;
|
|
header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
|
|
|
|
if (header0.PageLength & 1)
|
|
dv_alloc = (header0.PageLength * 4) + 4;
|
|
|
|
dv_alloc += (2048 + (header1.PageLength * 4));
|
|
|
|
pDvBuf = pci_alloc_consistent(ioc->pcidev, dv_alloc, &dvbuf_dma);
|
|
if (pDvBuf == NULL)
|
|
return 0;
|
|
|
|
sz = 0;
|
|
pbuf1 = (u8 *)pDvBuf;
|
|
buf1_dma = dvbuf_dma;
|
|
sz +=1024;
|
|
|
|
pbuf2 = (u8 *) (pDvBuf + sz);
|
|
buf2_dma = dvbuf_dma + sz;
|
|
sz +=1024;
|
|
|
|
pcfg0Data = (SCSIDevicePage0_t *) (pDvBuf + sz);
|
|
cfg0_dma_addr = dvbuf_dma + sz;
|
|
sz += header0.PageLength * 4;
|
|
|
|
/* 8-byte alignment
|
|
*/
|
|
if (header0.PageLength & 1)
|
|
sz += 4;
|
|
|
|
pcfg1Data = (SCSIDevicePage1_t *) (pDvBuf + sz);
|
|
cfg1_dma_addr = dvbuf_dma + sz;
|
|
|
|
/* Skip this ID? Set cfg.cfghdr.hdr to force config page write
|
|
*/
|
|
{
|
|
SpiCfgData *pspi_data = &hd->ioc->spi_data;
|
|
if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
|
|
/* Set the factor from nvram */
|
|
nfactor = (pspi_data->nvram[id] & MPT_NVRAM_SYNC_MASK) >> 8;
|
|
if (nfactor < pspi_data->minSyncFactor )
|
|
nfactor = pspi_data->minSyncFactor;
|
|
|
|
if (!(pspi_data->nvram[id] & MPT_NVRAM_ID_SCAN_ENABLE) ||
|
|
(pspi_data->PortFlags == MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV) ) {
|
|
|
|
ddvprintk((MYIOC_s_NOTE_FMT "DV Skipped: bus, id, lun (%d, %d, %d)\n",
|
|
ioc->name, bus, id, lun));
|
|
|
|
dv.cmd = MPT_SET_MAX;
|
|
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
|
|
cfg.cfghdr.hdr = &header1;
|
|
|
|
/* Save the final negotiated settings to
|
|
* SCSI device page 1.
|
|
*/
|
|
cfg.physAddr = cfg1_dma_addr;
|
|
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
|
|
cfg.dir = 1;
|
|
mpt_config(hd->ioc, &cfg);
|
|
goto target_done;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Finish iocmd inititialization - hidden or visible disk? */
|
|
if (ioc->raid_data.pIocPg3) {
|
|
/* Search IOC page 3 for matching id
|
|
*/
|
|
Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
|
|
int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
|
|
|
|
while (numPDisk) {
|
|
if (pPDisk->PhysDiskID == id) {
|
|
/* match */
|
|
iocmd.flags |= MPT_ICFLAG_PHYS_DISK;
|
|
iocmd.physDiskNum = pPDisk->PhysDiskNum;
|
|
|
|
/* Quiesce the IM
|
|
*/
|
|
if (mptscsih_do_raid(hd, MPI_RAID_ACTION_QUIESCE_PHYS_IO, &iocmd) < 0) {
|
|
ddvprintk((MYIOC_s_ERR_FMT "RAID Queisce FAILED!\n", ioc->name));
|
|
goto target_done;
|
|
}
|
|
break;
|
|
}
|
|
pPDisk++;
|
|
numPDisk--;
|
|
}
|
|
}
|
|
|
|
/* RAID Volume ID's may double for a physical device. If RAID but
|
|
* not a physical ID as well, skip DV.
|
|
*/
|
|
if ((hd->ioc->raid_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK))
|
|
goto target_done;
|
|
|
|
|
|
/* Basic Test.
|
|
* Async & Narrow - Inquiry
|
|
* Async & Narrow - Inquiry
|
|
* Maximum transfer rate - Inquiry
|
|
* Compare buffers:
|
|
* If compare, test complete.
|
|
* If miscompare and first pass, repeat
|
|
* If miscompare and not first pass, fall back and repeat
|
|
*/
|
|
hd->pLocal = NULL;
|
|
readPage0 = 0;
|
|
sz = SCSI_MAX_INQUIRY_BYTES;
|
|
rc = MPT_SCANDV_GOOD;
|
|
while (1) {
|
|
ddvprintk((MYIOC_s_NOTE_FMT "DV: Start Basic test on id=%d\n", ioc->name, id));
|
|
retcode = 0;
|
|
dv.cmd = MPT_SET_MIN;
|
|
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
|
|
|
|
cfg.cfghdr.hdr = &header1;
|
|
cfg.physAddr = cfg1_dma_addr;
|
|
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
|
|
cfg.dir = 1;
|
|
if (mpt_config(hd->ioc, &cfg) != 0)
|
|
goto target_done;
|
|
|
|
/* Wide - narrow - wide workaround case
|
|
*/
|
|
if ((rc == MPT_SCANDV_ISSUE_SENSE) && dv.max.width) {
|
|
/* Send an untagged command to reset disk Qs corrupted
|
|
* when a parity error occurs on a Request Sense.
|
|
*/
|
|
if ((hd->ioc->facts.FWVersion.Word >= 0x01000600) ||
|
|
((hd->ioc->facts.FWVersion.Word >= 0x01010000) &&
|
|
(hd->ioc->facts.FWVersion.Word < 0x01010B00)) ) {
|
|
|
|
iocmd.cmd = REQUEST_SENSE;
|
|
iocmd.data_dma = buf1_dma;
|
|
iocmd.data = pbuf1;
|
|
iocmd.size = 0x12;
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
else {
|
|
if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
rc = hd->pLocal->completion;
|
|
if ((rc == MPT_SCANDV_GOOD) || (rc == MPT_SCANDV_SENSE)) {
|
|
dv.max.width = 0;
|
|
doFallback = 0;
|
|
} else
|
|
goto target_done;
|
|
}
|
|
} else
|
|
goto target_done;
|
|
}
|
|
|
|
iocmd.cmd = INQUIRY;
|
|
iocmd.data_dma = buf1_dma;
|
|
iocmd.data = pbuf1;
|
|
iocmd.size = sz;
|
|
memset(pbuf1, 0x00, sz);
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
else {
|
|
if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
rc = hd->pLocal->completion;
|
|
if (rc == MPT_SCANDV_GOOD) {
|
|
if (hd->pLocal->scsiStatus == SAM_STAT_BUSY) {
|
|
if ((iocmd.flags & MPT_ICFLAG_TAGGED_CMD) == 0)
|
|
retcode = 1;
|
|
else
|
|
retcode = 0;
|
|
|
|
goto target_done;
|
|
}
|
|
} else if (rc == MPT_SCANDV_SENSE) {
|
|
;
|
|
} else {
|
|
/* If first command doesn't complete
|
|
* with a good status or with a check condition,
|
|
* exit.
|
|
*/
|
|
goto target_done;
|
|
}
|
|
}
|
|
|
|
/* Reset the size for disks
|
|
*/
|
|
inq0 = (*pbuf1) & 0x1F;
|
|
if ((inq0 == 0) && pTarget && !pTarget->raidVolume) {
|
|
sz = 0x40;
|
|
iocmd.size = sz;
|
|
}
|
|
|
|
/* Another GEM workaround. Check peripheral device type,
|
|
* if PROCESSOR, quit DV.
|
|
*/
|
|
if (inq0 == TYPE_PROCESSOR) {
|
|
mptscsih_initTarget(hd,
|
|
bus,
|
|
id,
|
|
lun,
|
|
pbuf1,
|
|
sz);
|
|
goto target_done;
|
|
}
|
|
|
|
if (inq0 > 0x08)
|
|
goto target_done;
|
|
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
|
|
if (sz == 0x40) {
|
|
if ((pTarget->maxWidth == 1) && (pTarget->maxOffset) && (nfactor < 0x0A)
|
|
&& (pTarget->minSyncFactor > 0x09)) {
|
|
if ((pbuf1[56] & 0x04) == 0)
|
|
;
|
|
else if ((pbuf1[56] & 0x01) == 1) {
|
|
pTarget->minSyncFactor =
|
|
nfactor > MPT_ULTRA320 ? nfactor : MPT_ULTRA320;
|
|
} else {
|
|
pTarget->minSyncFactor =
|
|
nfactor > MPT_ULTRA160 ? nfactor : MPT_ULTRA160;
|
|
}
|
|
|
|
dv.max.factor = pTarget->minSyncFactor;
|
|
|
|
if ((pbuf1[56] & 0x02) == 0) {
|
|
pTarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
|
|
hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
|
|
ddvprintk((MYIOC_s_NOTE_FMT
|
|
"DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n",
|
|
ioc->name, id, pbuf1[56]));
|
|
}
|
|
}
|
|
}
|
|
|
|
if (doFallback)
|
|
dv.cmd = MPT_FALLBACK;
|
|
else
|
|
dv.cmd = MPT_SET_MAX;
|
|
|
|
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
|
|
if (mpt_config(hd->ioc, &cfg) != 0)
|
|
goto target_done;
|
|
|
|
if ((!dv.now.width) && (!dv.now.offset))
|
|
goto target_done;
|
|
|
|
iocmd.cmd = INQUIRY;
|
|
iocmd.data_dma = buf2_dma;
|
|
iocmd.data = pbuf2;
|
|
iocmd.size = sz;
|
|
memset(pbuf2, 0x00, sz);
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
else if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
else {
|
|
/* Save the return code.
|
|
* If this is the first pass,
|
|
* read SCSI Device Page 0
|
|
* and update the target max parameters.
|
|
*/
|
|
rc = hd->pLocal->completion;
|
|
doFallback = 0;
|
|
if (rc == MPT_SCANDV_GOOD) {
|
|
if (!readPage0) {
|
|
u32 sdp0_info;
|
|
u32 sdp0_nego;
|
|
|
|
cfg.cfghdr.hdr = &header0;
|
|
cfg.physAddr = cfg0_dma_addr;
|
|
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
|
|
cfg.dir = 0;
|
|
|
|
if (mpt_config(hd->ioc, &cfg) != 0)
|
|
goto target_done;
|
|
|
|
sdp0_info = le32_to_cpu(pcfg0Data->Information) & 0x0E;
|
|
sdp0_nego = (le32_to_cpu(pcfg0Data->NegotiatedParameters) & 0xFF00 ) >> 8;
|
|
|
|
/* Quantum and Fujitsu workarounds.
|
|
* Quantum: PPR U320 -> PPR reply with Ultra2 and wide
|
|
* Fujitsu: PPR U320 -> Msg Reject and Ultra2 and wide
|
|
* Resetart with a request for U160.
|
|
*/
|
|
if ((dv.now.factor == MPT_ULTRA320) && (sdp0_nego == MPT_ULTRA2)) {
|
|
doFallback = 1;
|
|
} else {
|
|
dv.cmd = MPT_UPDATE_MAX;
|
|
mptscsih_dv_parms(hd, &dv, (void *)pcfg0Data);
|
|
/* Update the SCSI device page 1 area
|
|
*/
|
|
pcfg1Data->RequestedParameters = pcfg0Data->NegotiatedParameters;
|
|
readPage0 = 1;
|
|
}
|
|
}
|
|
|
|
/* Quantum workaround. Restart this test will the fallback
|
|
* flag set.
|
|
*/
|
|
if (doFallback == 0) {
|
|
if (memcmp(pbuf1, pbuf2, sz) != 0) {
|
|
if (!firstPass)
|
|
doFallback = 1;
|
|
} else {
|
|
ddvprintk((MYIOC_s_NOTE_FMT
|
|
"DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id));
|
|
hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE;
|
|
mptscsih_initTarget(hd,
|
|
bus,
|
|
id,
|
|
lun,
|
|
pbuf1,
|
|
sz);
|
|
break; /* test complete */
|
|
}
|
|
}
|
|
|
|
|
|
} else if (rc == MPT_SCANDV_ISSUE_SENSE)
|
|
doFallback = 1; /* set fallback flag */
|
|
else if ((rc == MPT_SCANDV_DID_RESET) ||
|
|
(rc == MPT_SCANDV_SENSE) ||
|
|
(rc == MPT_SCANDV_FALLBACK))
|
|
doFallback = 1; /* set fallback flag */
|
|
else
|
|
goto target_done;
|
|
|
|
firstPass = 0;
|
|
}
|
|
}
|
|
ddvprintk((MYIOC_s_NOTE_FMT "DV: Basic test on id=%d completed OK.\n", ioc->name, id));
|
|
|
|
if (ioc->spi_data.mpt_dv == 0)
|
|
goto target_done;
|
|
|
|
inq0 = (*pbuf1) & 0x1F;
|
|
|
|
/* Continue only for disks
|
|
*/
|
|
if (inq0 != 0)
|
|
goto target_done;
|
|
|
|
if ( ioc->spi_data.PortFlags == MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY )
|
|
goto target_done;
|
|
|
|
/* Start the Enhanced Test.
|
|
* 0) issue TUR to clear out check conditions
|
|
* 1) read capacity of echo (regular) buffer
|
|
* 2) reserve device
|
|
* 3) do write-read-compare data pattern test
|
|
* 4) release
|
|
* 5) update nego parms to target struct
|
|
*/
|
|
cfg.cfghdr.hdr = &header1;
|
|
cfg.physAddr = cfg1_dma_addr;
|
|
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
|
|
cfg.dir = 1;
|
|
|
|
iocmd.cmd = TEST_UNIT_READY;
|
|
iocmd.data_dma = -1;
|
|
iocmd.data = NULL;
|
|
iocmd.size = 0;
|
|
notDone = 1;
|
|
while (notDone) {
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
|
|
if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
|
|
rc = hd->pLocal->completion;
|
|
if (rc == MPT_SCANDV_GOOD)
|
|
notDone = 0;
|
|
else if (rc == MPT_SCANDV_SENSE) {
|
|
u8 skey = hd->pLocal->sense[2] & 0x0F;
|
|
u8 asc = hd->pLocal->sense[12];
|
|
u8 ascq = hd->pLocal->sense[13];
|
|
ddvprintk((MYIOC_s_INFO_FMT
|
|
"SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
|
|
ioc->name, skey, asc, ascq));
|
|
|
|
if (skey == UNIT_ATTENTION)
|
|
notDone++; /* repeat */
|
|
else if ((skey == NOT_READY) &&
|
|
(asc == 0x04)&&(ascq == 0x01)) {
|
|
/* wait then repeat */
|
|
mdelay (2000);
|
|
notDone++;
|
|
} else if ((skey == NOT_READY) && (asc == 0x3A)) {
|
|
/* no medium, try read test anyway */
|
|
notDone = 0;
|
|
} else {
|
|
/* All other errors are fatal.
|
|
*/
|
|
ddvprintk((MYIOC_s_INFO_FMT "DV: fatal error.",
|
|
ioc->name));
|
|
goto target_done;
|
|
}
|
|
} else
|
|
goto target_done;
|
|
}
|
|
|
|
iocmd.cmd = READ_BUFFER;
|
|
iocmd.data_dma = buf1_dma;
|
|
iocmd.data = pbuf1;
|
|
iocmd.size = 4;
|
|
iocmd.flags |= MPT_ICFLAG_BUF_CAP;
|
|
|
|
dataBufSize = 0;
|
|
echoBufSize = 0;
|
|
for (patt = 0; patt < 2; patt++) {
|
|
if (patt == 0)
|
|
iocmd.flags |= MPT_ICFLAG_ECHO;
|
|
else
|
|
iocmd.flags &= ~MPT_ICFLAG_ECHO;
|
|
|
|
notDone = 1;
|
|
while (notDone) {
|
|
bufsize = 0;
|
|
|
|
/* If not ready after 8 trials,
|
|
* give up on this device.
|
|
*/
|
|
if (notDone > 8)
|
|
goto target_done;
|
|
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
else if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
else {
|
|
rc = hd->pLocal->completion;
|
|
ddvprintk(("ReadBuffer Comp Code %d", rc));
|
|
ddvprintk((" buff: %0x %0x %0x %0x\n",
|
|
pbuf1[0], pbuf1[1], pbuf1[2], pbuf1[3]));
|
|
|
|
if (rc == MPT_SCANDV_GOOD) {
|
|
notDone = 0;
|
|
if (iocmd.flags & MPT_ICFLAG_ECHO) {
|
|
bufsize = ((pbuf1[2] & 0x1F) <<8) | pbuf1[3];
|
|
if (pbuf1[0] & 0x01)
|
|
iocmd.flags |= MPT_ICFLAG_EBOS;
|
|
} else {
|
|
bufsize = pbuf1[1]<<16 | pbuf1[2]<<8 | pbuf1[3];
|
|
}
|
|
} else if (rc == MPT_SCANDV_SENSE) {
|
|
u8 skey = hd->pLocal->sense[2] & 0x0F;
|
|
u8 asc = hd->pLocal->sense[12];
|
|
u8 ascq = hd->pLocal->sense[13];
|
|
ddvprintk((MYIOC_s_INFO_FMT
|
|
"SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
|
|
ioc->name, skey, asc, ascq));
|
|
if (skey == ILLEGAL_REQUEST) {
|
|
notDone = 0;
|
|
} else if (skey == UNIT_ATTENTION) {
|
|
notDone++; /* repeat */
|
|
} else if ((skey == NOT_READY) &&
|
|
(asc == 0x04)&&(ascq == 0x01)) {
|
|
/* wait then repeat */
|
|
mdelay (2000);
|
|
notDone++;
|
|
} else {
|
|
/* All other errors are fatal.
|
|
*/
|
|
ddvprintk((MYIOC_s_INFO_FMT "DV: fatal error.",
|
|
ioc->name));
|
|
goto target_done;
|
|
}
|
|
} else {
|
|
/* All other errors are fatal
|
|
*/
|
|
goto target_done;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (iocmd.flags & MPT_ICFLAG_ECHO)
|
|
echoBufSize = bufsize;
|
|
else
|
|
dataBufSize = bufsize;
|
|
}
|
|
sz = 0;
|
|
iocmd.flags &= ~MPT_ICFLAG_BUF_CAP;
|
|
|
|
/* Use echo buffers if possible,
|
|
* Exit if both buffers are 0.
|
|
*/
|
|
if (echoBufSize > 0) {
|
|
iocmd.flags |= MPT_ICFLAG_ECHO;
|
|
if (dataBufSize > 0)
|
|
bufsize = min(echoBufSize, dataBufSize);
|
|
else
|
|
bufsize = echoBufSize;
|
|
} else if (dataBufSize == 0)
|
|
goto target_done;
|
|
|
|
ddvprintk((MYIOC_s_INFO_FMT "%s Buffer Capacity %d\n", ioc->name,
|
|
(iocmd.flags & MPT_ICFLAG_ECHO) ? "Echo" : " ", bufsize));
|
|
|
|
/* Data buffers for write-read-compare test max 1K.
|
|
*/
|
|
sz = min(bufsize, 1024);
|
|
|
|
/* --- loop ----
|
|
* On first pass, always issue a reserve.
|
|
* On additional loops, only if a reset has occurred.
|
|
* iocmd.flags indicates if echo or regular buffer
|
|
*/
|
|
for (patt = 0; patt < 4; patt++) {
|
|
ddvprintk(("Pattern %d\n", patt));
|
|
if ((iocmd.flags & MPT_ICFLAG_RESERVED) && (iocmd.flags & MPT_ICFLAG_DID_RESET)) {
|
|
iocmd.cmd = TEST_UNIT_READY;
|
|
iocmd.data_dma = -1;
|
|
iocmd.data = NULL;
|
|
iocmd.size = 0;
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
|
|
iocmd.cmd = RELEASE;
|
|
iocmd.data_dma = -1;
|
|
iocmd.data = NULL;
|
|
iocmd.size = 0;
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
else if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
else {
|
|
rc = hd->pLocal->completion;
|
|
ddvprintk(("Release rc %d\n", rc));
|
|
if (rc == MPT_SCANDV_GOOD)
|
|
iocmd.flags &= ~MPT_ICFLAG_RESERVED;
|
|
else
|
|
goto target_done;
|
|
}
|
|
iocmd.flags &= ~MPT_ICFLAG_RESERVED;
|
|
}
|
|
iocmd.flags &= ~MPT_ICFLAG_DID_RESET;
|
|
|
|
if (iocmd.flags & MPT_ICFLAG_EBOS)
|
|
goto skip_Reserve;
|
|
|
|
repeat = 5;
|
|
while (repeat && (!(iocmd.flags & MPT_ICFLAG_RESERVED))) {
|
|
iocmd.cmd = RESERVE;
|
|
iocmd.data_dma = -1;
|
|
iocmd.data = NULL;
|
|
iocmd.size = 0;
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
else if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
else {
|
|
rc = hd->pLocal->completion;
|
|
if (rc == MPT_SCANDV_GOOD) {
|
|
iocmd.flags |= MPT_ICFLAG_RESERVED;
|
|
} else if (rc == MPT_SCANDV_SENSE) {
|
|
/* Wait if coming ready
|
|
*/
|
|
u8 skey = hd->pLocal->sense[2] & 0x0F;
|
|
u8 asc = hd->pLocal->sense[12];
|
|
u8 ascq = hd->pLocal->sense[13];
|
|
ddvprintk((MYIOC_s_INFO_FMT
|
|
"DV: Reserve Failed: ", ioc->name));
|
|
ddvprintk(("SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
|
|
skey, asc, ascq));
|
|
|
|
if ((skey == NOT_READY) && (asc == 0x04)&&
|
|
(ascq == 0x01)) {
|
|
/* wait then repeat */
|
|
mdelay (2000);
|
|
notDone++;
|
|
} else {
|
|
ddvprintk((MYIOC_s_INFO_FMT
|
|
"DV: Reserved Failed.", ioc->name));
|
|
goto target_done;
|
|
}
|
|
} else {
|
|
ddvprintk((MYIOC_s_INFO_FMT "DV: Reserved Failed.",
|
|
ioc->name));
|
|
goto target_done;
|
|
}
|
|
}
|
|
}
|
|
|
|
skip_Reserve:
|
|
mptscsih_fillbuf(pbuf1, sz, patt, 1);
|
|
iocmd.cmd = WRITE_BUFFER;
|
|
iocmd.data_dma = buf1_dma;
|
|
iocmd.data = pbuf1;
|
|
iocmd.size = sz;
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
else if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
else {
|
|
rc = hd->pLocal->completion;
|
|
if (rc == MPT_SCANDV_GOOD)
|
|
; /* Issue read buffer */
|
|
else if (rc == MPT_SCANDV_DID_RESET) {
|
|
/* If using echo buffers, reset to data buffers.
|
|
* Else do Fallback and restart
|
|
* this test (re-issue reserve
|
|
* because of bus reset).
|
|
*/
|
|
if ((iocmd.flags & MPT_ICFLAG_ECHO) && (dataBufSize >= bufsize)) {
|
|
iocmd.flags &= ~MPT_ICFLAG_ECHO;
|
|
} else {
|
|
dv.cmd = MPT_FALLBACK;
|
|
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
|
|
|
|
if (mpt_config(hd->ioc, &cfg) != 0)
|
|
goto target_done;
|
|
|
|
if ((!dv.now.width) && (!dv.now.offset))
|
|
goto target_done;
|
|
}
|
|
|
|
iocmd.flags |= MPT_ICFLAG_DID_RESET;
|
|
patt = -1;
|
|
continue;
|
|
} else if (rc == MPT_SCANDV_SENSE) {
|
|
/* Restart data test if UA, else quit.
|
|
*/
|
|
u8 skey = hd->pLocal->sense[2] & 0x0F;
|
|
ddvprintk((MYIOC_s_INFO_FMT
|
|
"SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", ioc->name, skey,
|
|
hd->pLocal->sense[12], hd->pLocal->sense[13]));
|
|
if (skey == UNIT_ATTENTION) {
|
|
patt = -1;
|
|
continue;
|
|
} else if (skey == ILLEGAL_REQUEST) {
|
|
if (iocmd.flags & MPT_ICFLAG_ECHO) {
|
|
if (dataBufSize >= bufsize) {
|
|
iocmd.flags &= ~MPT_ICFLAG_ECHO;
|
|
patt = -1;
|
|
continue;
|
|
}
|
|
}
|
|
goto target_done;
|
|
}
|
|
else
|
|
goto target_done;
|
|
} else {
|
|
/* fatal error */
|
|
goto target_done;
|
|
}
|
|
}
|
|
|
|
iocmd.cmd = READ_BUFFER;
|
|
iocmd.data_dma = buf2_dma;
|
|
iocmd.data = pbuf2;
|
|
iocmd.size = sz;
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
goto target_done;
|
|
else if (hd->pLocal == NULL)
|
|
goto target_done;
|
|
else {
|
|
rc = hd->pLocal->completion;
|
|
if (rc == MPT_SCANDV_GOOD) {
|
|
/* If buffers compare,
|
|
* go to next pattern,
|
|
* else, do a fallback and restart
|
|
* data transfer test.
|
|
*/
|
|
if (memcmp (pbuf1, pbuf2, sz) == 0) {
|
|
; /* goto next pattern */
|
|
} else {
|
|
/* Miscompare with Echo buffer, go to data buffer,
|
|
* if that buffer exists.
|
|
* Miscompare with Data buffer, check first 4 bytes,
|
|
* some devices return capacity. Exit in this case.
|
|
*/
|
|
if (iocmd.flags & MPT_ICFLAG_ECHO) {
|
|
if (dataBufSize >= bufsize)
|
|
iocmd.flags &= ~MPT_ICFLAG_ECHO;
|
|
else
|
|
goto target_done;
|
|
} else {
|
|
if (dataBufSize == (pbuf2[1]<<16 | pbuf2[2]<<8 | pbuf2[3])) {
|
|
/* Argh. Device returning wrong data.
|
|
* Quit DV for this device.
|
|
*/
|
|
goto target_done;
|
|
}
|
|
|
|
/* Had an actual miscompare. Slow down.*/
|
|
dv.cmd = MPT_FALLBACK;
|
|
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
|
|
|
|
if (mpt_config(hd->ioc, &cfg) != 0)
|
|
goto target_done;
|
|
|
|
if ((!dv.now.width) && (!dv.now.offset))
|
|
goto target_done;
|
|
}
|
|
|
|
patt = -1;
|
|
continue;
|
|
}
|
|
} else if (rc == MPT_SCANDV_DID_RESET) {
|
|
/* Do Fallback and restart
|
|
* this test (re-issue reserve
|
|
* because of bus reset).
|
|
*/
|
|
dv.cmd = MPT_FALLBACK;
|
|
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
|
|
|
|
if (mpt_config(hd->ioc, &cfg) != 0)
|
|
goto target_done;
|
|
|
|
if ((!dv.now.width) && (!dv.now.offset))
|
|
goto target_done;
|
|
|
|
iocmd.flags |= MPT_ICFLAG_DID_RESET;
|
|
patt = -1;
|
|
continue;
|
|
} else if (rc == MPT_SCANDV_SENSE) {
|
|
/* Restart data test if UA, else quit.
|
|
*/
|
|
u8 skey = hd->pLocal->sense[2] & 0x0F;
|
|
ddvprintk((MYIOC_s_INFO_FMT
|
|
"SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", ioc->name, skey,
|
|
hd->pLocal->sense[12], hd->pLocal->sense[13]));
|
|
if (skey == UNIT_ATTENTION) {
|
|
patt = -1;
|
|
continue;
|
|
}
|
|
else
|
|
goto target_done;
|
|
} else {
|
|
/* fatal error */
|
|
goto target_done;
|
|
}
|
|
}
|
|
|
|
} /* --- end of patt loop ---- */
|
|
|
|
target_done:
|
|
if (iocmd.flags & MPT_ICFLAG_RESERVED) {
|
|
iocmd.cmd = RELEASE;
|
|
iocmd.data_dma = -1;
|
|
iocmd.data = NULL;
|
|
iocmd.size = 0;
|
|
if (mptscsih_do_cmd(hd, &iocmd) < 0)
|
|
printk(MYIOC_s_INFO_FMT "DV: Release failed. id %d",
|
|
ioc->name, id);
|
|
else if (hd->pLocal) {
|
|
if (hd->pLocal->completion == MPT_SCANDV_GOOD)
|
|
iocmd.flags &= ~MPT_ICFLAG_RESERVED;
|
|
} else {
|
|
printk(MYIOC_s_INFO_FMT "DV: Release failed. id %d",
|
|
ioc->name, id);
|
|
}
|
|
}
|
|
|
|
|
|
/* Set if cfg1_dma_addr contents is valid
|
|
*/
|
|
if ((cfg.cfghdr.hdr != NULL) && (retcode == 0)){
|
|
/* If disk, not U320, disable QAS
|
|
*/
|
|
if ((inq0 == 0) && (dv.now.factor > MPT_ULTRA320)) {
|
|
hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
|
|
ddvprintk((MYIOC_s_NOTE_FMT
|
|
"noQas set due to id=%d has factor=%x\n", ioc->name, id, dv.now.factor));
|
|
}
|
|
|
|
dv.cmd = MPT_SAVE;
|
|
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
|
|
|
|
/* Double writes to SDP1 can cause problems,
|
|
* skip save of the final negotiated settings to
|
|
* SCSI device page 1.
|
|
*
|
|
cfg.cfghdr.hdr = &header1;
|
|
cfg.physAddr = cfg1_dma_addr;
|
|
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
|
|
cfg.dir = 1;
|
|
mpt_config(hd->ioc, &cfg);
|
|
*/
|
|
}
|
|
|
|
/* If this is a RAID Passthrough, enable internal IOs
|
|
*/
|
|
if (iocmd.flags & MPT_ICFLAG_PHYS_DISK) {
|
|
if (mptscsih_do_raid(hd, MPI_RAID_ACTION_ENABLE_PHYS_IO, &iocmd) < 0)
|
|
ddvprintk((MYIOC_s_ERR_FMT "RAID Enable FAILED!\n", ioc->name));
|
|
}
|
|
|
|
/* Done with the DV scan of the current target
|
|
*/
|
|
if (pDvBuf)
|
|
pci_free_consistent(ioc->pcidev, dv_alloc, pDvBuf, dvbuf_dma);
|
|
|
|
ddvtprintk((MYIOC_s_INFO_FMT "DV Done id=%d\n",
|
|
ioc->name, id));
|
|
|
|
return retcode;
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* mptscsih_dv_parms - perform a variety of operations on the
|
|
* parameters used for negotiation.
|
|
* @hd: Pointer to a SCSI host.
|
|
* @dv: Pointer to a structure that contains the maximum and current
|
|
* negotiated parameters.
|
|
*/
|
|
static void
|
|
mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
|
|
{
|
|
VirtDevice *pTarget;
|
|
SCSIDevicePage0_t *pPage0;
|
|
SCSIDevicePage1_t *pPage1;
|
|
int val = 0, data, configuration;
|
|
u8 width = 0;
|
|
u8 offset = 0;
|
|
u8 factor = 0;
|
|
u8 negoFlags = 0;
|
|
u8 cmd = dv->cmd;
|
|
u8 id = dv->id;
|
|
|
|
switch (cmd) {
|
|
case MPT_GET_NVRAM_VALS:
|
|
ddvprintk((MYIOC_s_NOTE_FMT "Getting NVRAM: ",
|
|
hd->ioc->name));
|
|
/* Get the NVRAM values and save in tmax
|
|
* If not an LVD bus, the adapter minSyncFactor has been
|
|
* already throttled back.
|
|
*/
|
|
negoFlags = hd->ioc->spi_data.noQas;
|
|
if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume) {
|
|
width = pTarget->maxWidth;
|
|
offset = pTarget->maxOffset;
|
|
factor = pTarget->minSyncFactor;
|
|
negoFlags |= pTarget->negoFlags;
|
|
} else {
|
|
if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
|
|
data = hd->ioc->spi_data.nvram[id];
|
|
width = data & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
|
|
if ((offset = hd->ioc->spi_data.maxSyncOffset) == 0)
|
|
factor = MPT_ASYNC;
|
|
else {
|
|
factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
|
|
if ((factor == 0) || (factor == MPT_ASYNC)){
|
|
factor = MPT_ASYNC;
|
|
offset = 0;
|
|
}
|
|
}
|
|
} else {
|
|
width = MPT_NARROW;
|
|
offset = 0;
|
|
factor = MPT_ASYNC;
|
|
}
|
|
|
|
/* Set the negotiation flags */
|
|
if (!width)
|
|
negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
|
|
|
|
if (!offset)
|
|
negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
|
|
}
|
|
|
|
/* limit by adapter capabilities */
|
|
width = min(width, hd->ioc->spi_data.maxBusWidth);
|
|
offset = min(offset, hd->ioc->spi_data.maxSyncOffset);
|
|
factor = max(factor, hd->ioc->spi_data.minSyncFactor);
|
|
|
|
/* Check Consistency */
|
|
if (offset && (factor < MPT_ULTRA2) && !width)
|
|
factor = MPT_ULTRA2;
|
|
|
|
dv->max.width = width;
|
|
dv->max.offset = offset;
|
|
dv->max.factor = factor;
|
|
dv->max.flags = negoFlags;
|
|
ddvprintk((" id=%d width=%d factor=%x offset=%x flags=%x\n",
|
|
id, width, factor, offset, negoFlags));
|
|
break;
|
|
|
|
case MPT_UPDATE_MAX:
|
|
ddvprintk((MYIOC_s_NOTE_FMT
|
|
"Updating with SDP0 Data: ", hd->ioc->name));
|
|
/* Update tmax values with those from Device Page 0.*/
|
|
pPage0 = (SCSIDevicePage0_t *) pPage;
|
|
if (pPage0) {
|
|
val = le32_to_cpu(pPage0->NegotiatedParameters);
|
|
dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
|
|
dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
|
|
dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
|
|
}
|
|
|
|
dv->now.width = dv->max.width;
|
|
dv->now.offset = dv->max.offset;
|
|
dv->now.factor = dv->max.factor;
|
|
ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x\n",
|
|
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags));
|
|
break;
|
|
|
|
case MPT_SET_MAX:
|
|
ddvprintk((MYIOC_s_NOTE_FMT "Setting Max: ",
|
|
hd->ioc->name));
|
|
/* Set current to the max values. Update the config page.*/
|
|
dv->now.width = dv->max.width;
|
|
dv->now.offset = dv->max.offset;
|
|
dv->now.factor = dv->max.factor;
|
|
dv->now.flags = dv->max.flags;
|
|
|
|
pPage1 = (SCSIDevicePage1_t *)pPage;
|
|
if (pPage1) {
|
|
mptscsih_setDevicePage1Flags (dv->now.width, dv->now.factor,
|
|
dv->now.offset, &val, &configuration, dv->now.flags);
|
|
dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
|
|
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
|
|
pPage1->RequestedParameters = cpu_to_le32(val);
|
|
pPage1->Reserved = 0;
|
|
pPage1->Configuration = cpu_to_le32(configuration);
|
|
}
|
|
|
|
ddvprintk(("id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x configuration=%x\n",
|
|
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
|
|
break;
|
|
|
|
case MPT_SET_MIN:
|
|
ddvprintk((MYIOC_s_NOTE_FMT "Setting Min: ",
|
|
hd->ioc->name));
|
|
/* Set page to asynchronous and narrow
|
|
* Do not update now, breaks fallback routine. */
|
|
width = MPT_NARROW;
|
|
offset = 0;
|
|
factor = MPT_ASYNC;
|
|
negoFlags = dv->max.flags;
|
|
|
|
pPage1 = (SCSIDevicePage1_t *)pPage;
|
|
if (pPage1) {
|
|
mptscsih_setDevicePage1Flags (width, factor,
|
|
offset, &val, &configuration, negoFlags);
|
|
dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
|
|
id, width, factor, offset, negoFlags, val, configuration));
|
|
pPage1->RequestedParameters = cpu_to_le32(val);
|
|
pPage1->Reserved = 0;
|
|
pPage1->Configuration = cpu_to_le32(configuration);
|
|
}
|
|
ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n",
|
|
id, width, factor, offset, val, configuration, negoFlags));
|
|
break;
|
|
|
|
case MPT_FALLBACK:
|
|
ddvprintk((MYIOC_s_NOTE_FMT
|
|
"Fallback: Start: offset %d, factor %x, width %d \n",
|
|
hd->ioc->name, dv->now.offset,
|
|
dv->now.factor, dv->now.width));
|
|
width = dv->now.width;
|
|
offset = dv->now.offset;
|
|
factor = dv->now.factor;
|
|
if ((offset) && (dv->max.width)) {
|
|
if (factor < MPT_ULTRA160)
|
|
factor = MPT_ULTRA160;
|
|
else if (factor < MPT_ULTRA2) {
|
|
factor = MPT_ULTRA2;
|
|
width = MPT_WIDE;
|
|
} else if ((factor == MPT_ULTRA2) && width) {
|
|
factor = MPT_ULTRA2;
|
|
width = MPT_NARROW;
|
|
} else if (factor < MPT_ULTRA) {
|
|
factor = MPT_ULTRA;
|
|
width = MPT_WIDE;
|
|
} else if ((factor == MPT_ULTRA) && width) {
|
|
width = MPT_NARROW;
|
|
} else if (factor < MPT_FAST) {
|
|
factor = MPT_FAST;
|
|
width = MPT_WIDE;
|
|
} else if ((factor == MPT_FAST) && width) {
|
|
factor = MPT_FAST;
|
|
width = MPT_NARROW;
|
|
} else if (factor < MPT_SCSI) {
|
|
factor = MPT_SCSI;
|
|
width = MPT_WIDE;
|
|
} else if ((factor == MPT_SCSI) && width) {
|
|
factor = MPT_SCSI;
|
|
width = MPT_NARROW;
|
|
} else {
|
|
factor = MPT_ASYNC;
|
|
offset = 0;
|
|
}
|
|
|
|
} else if (offset) {
|
|
width = MPT_NARROW;
|
|
if (factor < MPT_ULTRA)
|
|
factor = MPT_ULTRA;
|
|
else if (factor < MPT_FAST)
|
|
factor = MPT_FAST;
|
|
else if (factor < MPT_SCSI)
|
|
factor = MPT_SCSI;
|
|
else {
|
|
factor = MPT_ASYNC;
|
|
offset = 0;
|
|
}
|
|
|
|
} else {
|
|
width = MPT_NARROW;
|
|
factor = MPT_ASYNC;
|
|
}
|
|
dv->max.flags |= MPT_TARGET_NO_NEGO_QAS;
|
|
dv->max.flags &= ~MPT_TAPE_NEGO_IDP;
|
|
|
|
dv->now.width = width;
|
|
dv->now.offset = offset;
|
|
dv->now.factor = factor;
|
|
dv->now.flags = dv->max.flags;
|
|
|
|
pPage1 = (SCSIDevicePage1_t *)pPage;
|
|
if (pPage1) {
|
|
mptscsih_setDevicePage1Flags (width, factor, offset, &val,
|
|
&configuration, dv->now.flags);
|
|
dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
|
|
id, width, offset, factor, dv->now.flags, val, configuration));
|
|
|
|
pPage1->RequestedParameters = cpu_to_le32(val);
|
|
pPage1->Reserved = 0;
|
|
pPage1->Configuration = cpu_to_le32(configuration);
|
|
}
|
|
|
|
ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n",
|
|
id, dv->now.offset, dv->now.factor, dv->now.width, val, configuration));
|
|
break;
|
|
|
|
case MPT_SAVE:
|
|
ddvprintk((MYIOC_s_NOTE_FMT
|
|
"Saving to Target structure: ", hd->ioc->name));
|
|
ddvprintk(("id=%d width=%x factor=%x offset=%d flags=%x\n",
|
|
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags));
|
|
|
|
/* Save these values to target structures
|
|
* or overwrite nvram (phys disks only).
|
|
*/
|
|
|
|
if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume ) {
|
|
pTarget->maxWidth = dv->now.width;
|
|
pTarget->maxOffset = dv->now.offset;
|
|
pTarget->minSyncFactor = dv->now.factor;
|
|
pTarget->negoFlags = dv->now.flags;
|
|
} else {
|
|
/* Preserv all flags, use
|
|
* read-modify-write algorithm
|
|
*/
|
|
if (hd->ioc->spi_data.nvram) {
|
|
data = hd->ioc->spi_data.nvram[id];
|
|
|
|
if (dv->now.width)
|
|
data &= ~MPT_NVRAM_WIDE_DISABLE;
|
|
else
|
|
data |= MPT_NVRAM_WIDE_DISABLE;
|
|
|
|
if (!dv->now.offset)
|
|
factor = MPT_ASYNC;
|
|
|
|
data &= ~MPT_NVRAM_SYNC_MASK;
|
|
data |= (dv->now.factor << MPT_NVRAM_SYNC_SHIFT) & MPT_NVRAM_SYNC_MASK;
|
|
|
|
hd->ioc->spi_data.nvram[id] = data;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|
|
/* mptscsih_fillbuf - fill a buffer with a special data pattern
|
|
* cleanup. For bus scan only.
|
|
*
|
|
* @buffer: Pointer to data buffer to be filled.
|
|
* @size: Number of bytes to fill
|
|
* @index: Pattern index
|
|
* @width: bus width, 0 (8 bits) or 1 (16 bits)
|
|
*/
|
|
static void
|
|
mptscsih_fillbuf(char *buffer, int size, int index, int width)
|
|
{
|
|
char *ptr = buffer;
|
|
int ii;
|
|
char byte;
|
|
short val;
|
|
|
|
switch (index) {
|
|
case 0:
|
|
|
|
if (width) {
|
|
/* Pattern: 0000 FFFF 0000 FFFF
|
|
*/
|
|
for (ii=0; ii < size; ii++, ptr++) {
|
|
if (ii & 0x02)
|
|
*ptr = 0xFF;
|
|
else
|
|
*ptr = 0x00;
|
|
}
|
|
} else {
|
|
/* Pattern: 00 FF 00 FF
|
|
*/
|
|
for (ii=0; ii < size; ii++, ptr++) {
|
|
if (ii & 0x01)
|
|
*ptr = 0xFF;
|
|
else
|
|
*ptr = 0x00;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
if (width) {
|
|
/* Pattern: 5555 AAAA 5555 AAAA 5555
|
|
*/
|
|
for (ii=0; ii < size; ii++, ptr++) {
|
|
if (ii & 0x02)
|
|
*ptr = 0xAA;
|
|
else
|
|
*ptr = 0x55;
|
|
}
|
|
} else {
|
|
/* Pattern: 55 AA 55 AA 55
|
|
*/
|
|
for (ii=0; ii < size; ii++, ptr++) {
|
|
if (ii & 0x01)
|
|
*ptr = 0xAA;
|
|
else
|
|
*ptr = 0x55;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
/* Pattern: 00 01 02 03 04 05
|
|
* ... FE FF 00 01..
|
|
*/
|
|
for (ii=0; ii < size; ii++, ptr++)
|
|
*ptr = (char) ii;
|
|
break;
|
|
|
|
case 3:
|
|
if (width) {
|
|
/* Wide Pattern: FFFE 0001 FFFD 0002
|
|
* ... 4000 DFFF 8000 EFFF
|
|
*/
|
|
byte = 0;
|
|
for (ii=0; ii < size/2; ii++) {
|
|
/* Create the base pattern
|
|
*/
|
|
val = (1 << byte);
|
|
/* every 64 (0x40) bytes flip the pattern
|
|
* since we fill 2 bytes / iteration,
|
|
* test for ii = 0x20
|
|
*/
|
|
if (ii & 0x20)
|
|
val = ~(val);
|
|
|
|
if (ii & 0x01) {
|
|
*ptr = (char)( (val & 0xFF00) >> 8);
|
|
ptr++;
|
|
*ptr = (char)(val & 0xFF);
|
|
byte++;
|
|
byte &= 0x0F;
|
|
} else {
|
|
val = ~val;
|
|
*ptr = (char)( (val & 0xFF00) >> 8);
|
|
ptr++;
|
|
*ptr = (char)(val & 0xFF);
|
|
}
|
|
|
|
ptr++;
|
|
}
|
|
} else {
|
|
/* Narrow Pattern: FE 01 FD 02 FB 04
|
|
* .. 7F 80 01 FE 02 FD ... 80 7F
|
|
*/
|
|
byte = 0;
|
|
for (ii=0; ii < size; ii++, ptr++) {
|
|
/* Base pattern - first 32 bytes
|
|
*/
|
|
if (ii & 0x01) {
|
|
*ptr = (1 << byte);
|
|
byte++;
|
|
byte &= 0x07;
|
|
} else {
|
|
*ptr = (char) (~(1 << byte));
|
|
}
|
|
|
|
/* Flip the pattern every 32 bytes
|
|
*/
|
|
if (ii & 0x20)
|
|
*ptr = ~(*ptr);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */
|
|
|
|
EXPORT_SYMBOL(mptscsih_remove);
|
|
EXPORT_SYMBOL(mptscsih_shutdown);
|
|
#ifdef CONFIG_PM
|
|
EXPORT_SYMBOL(mptscsih_suspend);
|
|
EXPORT_SYMBOL(mptscsih_resume);
|
|
#endif
|
|
EXPORT_SYMBOL(mptscsih_proc_info);
|
|
EXPORT_SYMBOL(mptscsih_info);
|
|
EXPORT_SYMBOL(mptscsih_qcmd);
|
|
EXPORT_SYMBOL(mptscsih_slave_alloc);
|
|
EXPORT_SYMBOL(mptscsih_slave_destroy);
|
|
EXPORT_SYMBOL(mptscsih_slave_configure);
|
|
EXPORT_SYMBOL(mptscsih_abort);
|
|
EXPORT_SYMBOL(mptscsih_dev_reset);
|
|
EXPORT_SYMBOL(mptscsih_bus_reset);
|
|
EXPORT_SYMBOL(mptscsih_host_reset);
|
|
EXPORT_SYMBOL(mptscsih_bios_param);
|
|
EXPORT_SYMBOL(mptscsih_io_done);
|
|
EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
|
|
EXPORT_SYMBOL(mptscsih_scandv_complete);
|
|
EXPORT_SYMBOL(mptscsih_event_process);
|
|
EXPORT_SYMBOL(mptscsih_ioc_reset);
|
|
EXPORT_SYMBOL(mptscsih_change_queue_depth);
|
|
EXPORT_SYMBOL(mptscsih_timer_expired);
|
|
|
|
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
|