Archived
14
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/usb
Ming Lei 41f05dedea usb: ehci: remove the 1st wmb in qh_append_tds
According to ehci spec 4.10.2, Advance Queue

	If the fetched qTD has its Active bit set to a zero, the
	host controller aborts the queue advance and follows the
	queue head's horizontal pointer to the next schedule data
	structure.

the 'qtd' will be linked into qh hardware queue after the line
below

	*dummy = *qtd;

is executed and observed by EHCI HC, but EHCI HC won't have chance to
fetch the qtd descriptor pointed by 'qtd' in qh_append_tds until the
line below

	dummy->hw_token = token;	#set Active bit here

is executed by CPU and observed by EHCI HC.

There is already one 'wmb' to order writing to 'dummy'/'qtd' descriptors
and writing 'token' to 'dummy' descriptor(set Active bit), so the 1st
wmb is not needed and can be removed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-18 01:38:59 -07:00
..
atm drivers: usb: atm: ueagle-atm: Add missing const qualifier 2011-07-08 14:51:30 -07:00
c67x00 Fix common misspellings 2011-03-31 11:26:23 -03:00
class usb: cdc-acm: Owen SI-30 support 2011-09-18 01:33:07 -07:00
core usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
dwc3 usb: fix dwc3 build when USB_GADGET_DWC3 is not enabled 2011-08-24 15:06:53 -07:00
early USB: EHCI: Support controllers with big endian capability regs 2011-05-03 11:43:21 -07:00
gadget USB: g_printer: fix bug in unregistration 2011-09-18 01:33:06 -07:00
host usb: ehci: remove the 1st wmb in qh_append_tds 2011-09-18 01:38:59 -07:00
image atomic: use <linux/atomic.h> 2011-07-26 16:49:47 -07:00
misc usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
mon USB: mon: Allow to use usbmon without debugfs 2011-07-08 14:55:09 -07:00
musb musb_gadget: Fix for spurious interrupts on endpoint zero. 2011-09-09 15:58:02 -07:00
otg USB: otg: remove unused function twl6030_set_phy_clk 2011-08-22 16:07:40 -07:00
renesas_usbhs usb: renesas_usbhs: use usb_endpoint_maxp() 2011-08-22 15:54:39 -07:00
serial USB: option: add various ZTE device network interfaces to the blacklist 2011-09-18 01:23:23 -07:00
storage usb-storage: fix realtek cr configuration 2011-09-18 01:33:07 -07:00
wusbcore USB: use usb_endpoint_maxp() instead of le16_to_cpu() 2011-08-23 09:47:40 -07:00
Kconfig usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
Makefile usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
README
usb-common.c usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
usb-skeleton.c USB: use usb_endpoint_maxp() instead of le16_to_cpu() 2011-08-23 09:47:40 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.