![Bjorn Helgaas](/assets/img/avatar_default.png)
Make x86 COM ports into platform devices and don't probe for them if we have PNP. This prevents double discovery, where a device was found both by the legacy probe and by 8250_pnp, e.g., serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A This also means IRDA devices without a UART PNP ID will no longer be claimed by the serial driver, which might require changes in IRDA drivers and administration. In addition to this patch, you may need to configure a setserial init script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART stuff back in. On Debian, "dpkg-reconfigure setserial" with the "kernel" option does this. To force the old legacy probe behavior even when we have PNPBIOS or ACPI, load the new legacy_serial module (or build 8250 static) with the "legacy_serial.force" option. [akpm@linux-foundation.org: fix makefiles] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
88 lines
3.1 KiB
Makefile
88 lines
3.1 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
extra-y := head.o init_task.o vmlinux.lds
|
|
|
|
obj-y := process.o signal.o entry.o traps.o irq.o \
|
|
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
|
|
pci-dma.o i386_ksyms.o i387.o bootflag.o e820.o\
|
|
quirks.o i8237.o topology.o alternative.o i8253.o tsc.o
|
|
|
|
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
|
obj-y += cpu/
|
|
obj-y += acpi/
|
|
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
|
|
obj-$(CONFIG_MCA) += mca.o
|
|
obj-$(CONFIG_X86_MSR) += msr.o
|
|
obj-$(CONFIG_X86_CPUID) += cpuid.o
|
|
obj-$(CONFIG_MICROCODE) += microcode.o
|
|
obj-$(CONFIG_APM) += apm.o
|
|
obj-$(CONFIG_X86_SMP) += smp.o smpboot.o tsc_sync.o
|
|
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
|
|
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
|
|
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
|
|
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
|
|
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups.o
|
|
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
|
|
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
|
|
obj-$(CONFIG_X86_NUMAQ) += numaq.o
|
|
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
|
|
obj-$(CONFIG_KPROBES) += kprobes.o
|
|
obj-$(CONFIG_MODULES) += module.o
|
|
obj-y += sysenter.o vsyscall.o
|
|
obj-$(CONFIG_ACPI_SRAT) += srat.o
|
|
obj-$(CONFIG_EFI) += efi.o efi_stub.o
|
|
obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
|
|
obj-$(CONFIG_SERIAL_8250) += legacy_serial.o
|
|
obj-$(CONFIG_VM86) += vm86.o
|
|
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
|
obj-$(CONFIG_HPET_TIMER) += hpet.o
|
|
obj-$(CONFIG_K8_NB) += k8.o
|
|
|
|
obj-$(CONFIG_VMI) += vmi.o vmiclock.o
|
|
obj-$(CONFIG_PARAVIRT) += paravirt.o
|
|
obj-y += pcspeaker.o
|
|
|
|
obj-$(CONFIG_SCx200) += scx200.o
|
|
|
|
# vsyscall.o contains the vsyscall DSO images as __initdata.
|
|
# We must build both images before we can assemble it.
|
|
# Note: kbuild does not track this dependency due to usage of .incbin
|
|
$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
|
|
targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
|
|
targets += vsyscall-note.o vsyscall.lds
|
|
|
|
# The DSO images are built using a special linker script.
|
|
quiet_cmd_syscall = SYSCALL $@
|
|
cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
|
|
-Wl,-T,$(filter-out FORCE,$^) -o $@
|
|
|
|
export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
|
|
|
|
vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
|
|
$(call ld-option, -Wl$(comma)--hash-style=sysv)
|
|
SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags)
|
|
SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags)
|
|
|
|
$(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so: \
|
|
$(obj)/vsyscall-%.so: $(src)/vsyscall.lds \
|
|
$(obj)/vsyscall-%.o $(obj)/vsyscall-note.o FORCE
|
|
$(call if_changed,syscall)
|
|
|
|
# We also create a special relocatable object that should mirror the symbol
|
|
# table and layout of the linked DSO. With ld -R we can then refer to
|
|
# these symbols in the kernel code rather than hand-coded addresses.
|
|
extra-y += vsyscall-syms.o
|
|
$(obj)/built-in.o: $(obj)/vsyscall-syms.o
|
|
$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
|
|
|
|
SYSCFLAGS_vsyscall-syms.o = -r
|
|
$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \
|
|
$(obj)/vsyscall-sysenter.o $(obj)/vsyscall-note.o FORCE
|
|
$(call if_changed,syscall)
|
|
|
|
k8-y += ../../x86_64/kernel/k8.o
|
|
stacktrace-y += ../../x86_64/kernel/stacktrace.o
|
|
|