![Fabio Estevam](/assets/img/avatar_default.png)
If CONFIG_MTD_PARTITIONS is not selected, then the following warning is generated: CC drivers/mtd/nand/mxc_nand.o drivers/mtd/nand/mxc_nand.c: In function 'mxcnd_probe': drivers/mtd/nand/mxc_nand.c:1014: warning: unused variable 'nr_parts' Fix it by marking nr_parts as __maybe_unused. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
1271 lines
32 KiB
C
1271 lines
32 KiB
C
/*
|
|
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/completion.h>
|
|
|
|
#include <asm/mach/flash.h>
|
|
#include <mach/mxc_nand.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#define DRIVER_NAME "mxc_nand"
|
|
|
|
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
|
|
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
|
|
#define nfc_is_v3_2() cpu_is_mx51()
|
|
#define nfc_is_v3() nfc_is_v3_2()
|
|
|
|
/* Addresses for NFC registers */
|
|
#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
|
|
#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04)
|
|
#define NFC_V1_V2_FLASH_ADDR (host->regs + 0x06)
|
|
#define NFC_V1_V2_FLASH_CMD (host->regs + 0x08)
|
|
#define NFC_V1_V2_CONFIG (host->regs + 0x0a)
|
|
#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c)
|
|
#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e)
|
|
#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10)
|
|
#define NFC_V1_V2_WRPROT (host->regs + 0x12)
|
|
#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14)
|
|
#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16)
|
|
#define NFC_V21_UNLOCKSTART_BLKADDR (host->regs + 0x20)
|
|
#define NFC_V21_UNLOCKEND_BLKADDR (host->regs + 0x22)
|
|
#define NFC_V1_V2_NF_WRPRST (host->regs + 0x18)
|
|
#define NFC_V1_V2_CONFIG1 (host->regs + 0x1a)
|
|
#define NFC_V1_V2_CONFIG2 (host->regs + 0x1c)
|
|
|
|
#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
|
|
#define NFC_V1_V2_CONFIG1_SP_EN (1 << 2)
|
|
#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
|
|
#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
|
|
#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
|
|
#define NFC_V1_V2_CONFIG1_RST (1 << 6)
|
|
#define NFC_V1_V2_CONFIG1_CE (1 << 7)
|
|
#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
|
|
#define NFC_V2_CONFIG1_PPB(x) (((x) & 0x3) << 9)
|
|
#define NFC_V2_CONFIG1_FP_INT (1 << 11)
|
|
|
|
#define NFC_V1_V2_CONFIG2_INT (1 << 15)
|
|
|
|
/*
|
|
* Operation modes for the NFC. Valid for v1, v2 and v3
|
|
* type controllers.
|
|
*/
|
|
#define NFC_CMD (1 << 0)
|
|
#define NFC_ADDR (1 << 1)
|
|
#define NFC_INPUT (1 << 2)
|
|
#define NFC_OUTPUT (1 << 3)
|
|
#define NFC_ID (1 << 4)
|
|
#define NFC_STATUS (1 << 5)
|
|
|
|
#define NFC_V3_FLASH_CMD (host->regs_axi + 0x00)
|
|
#define NFC_V3_FLASH_ADDR0 (host->regs_axi + 0x04)
|
|
|
|
#define NFC_V3_CONFIG1 (host->regs_axi + 0x34)
|
|
#define NFC_V3_CONFIG1_SP_EN (1 << 0)
|
|
#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7 ) << 4)
|
|
|
|
#define NFC_V3_ECC_STATUS_RESULT (host->regs_axi + 0x38)
|
|
|
|
#define NFC_V3_LAUNCH (host->regs_axi + 0x40)
|
|
|
|
#define NFC_V3_WRPROT (host->regs_ip + 0x0)
|
|
#define NFC_V3_WRPROT_LOCK_TIGHT (1 << 0)
|
|
#define NFC_V3_WRPROT_LOCK (1 << 1)
|
|
#define NFC_V3_WRPROT_UNLOCK (1 << 2)
|
|
#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
|
|
|
|
#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0 (host->regs_ip + 0x04)
|
|
|
|
#define NFC_V3_CONFIG2 (host->regs_ip + 0x24)
|
|
#define NFC_V3_CONFIG2_PS_512 (0 << 0)
|
|
#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
|
|
#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
|
|
#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
|
|
#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
|
|
#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
|
|
#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5)
|
|
#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
|
|
#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7)
|
|
#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12)
|
|
#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
|
|
#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
|
|
#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
|
|
|
|
#define NFC_V3_CONFIG3 (host->regs_ip + 0x28)
|
|
#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
|
|
#define NFC_V3_CONFIG3_FW8 (1 << 3)
|
|
#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
|
|
#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x) (((x) & 0x7) << 12)
|
|
#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
|
|
#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
|
|
|
|
#define NFC_V3_IPC (host->regs_ip + 0x2C)
|
|
#define NFC_V3_IPC_CREQ (1 << 0)
|
|
#define NFC_V3_IPC_INT (1 << 31)
|
|
|
|
#define NFC_V3_DELAY_LINE (host->regs_ip + 0x34)
|
|
|
|
struct mxc_nand_host {
|
|
struct mtd_info mtd;
|
|
struct nand_chip nand;
|
|
struct mtd_partition *parts;
|
|
struct device *dev;
|
|
|
|
void *spare0;
|
|
void *main_area0;
|
|
|
|
void __iomem *base;
|
|
void __iomem *regs;
|
|
void __iomem *regs_axi;
|
|
void __iomem *regs_ip;
|
|
int status_request;
|
|
struct clk *clk;
|
|
int clk_act;
|
|
int irq;
|
|
int eccsize;
|
|
|
|
struct completion op_completion;
|
|
|
|
uint8_t *data_buf;
|
|
unsigned int buf_start;
|
|
int spare_len;
|
|
|
|
void (*preset)(struct mtd_info *);
|
|
void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
|
|
void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
|
|
void (*send_page)(struct mtd_info *, unsigned int);
|
|
void (*send_read_id)(struct mxc_nand_host *);
|
|
uint16_t (*get_dev_status)(struct mxc_nand_host *);
|
|
int (*check_int)(struct mxc_nand_host *);
|
|
void (*irq_control)(struct mxc_nand_host *, int);
|
|
};
|
|
|
|
/* OOB placement block for use with hardware ecc generation */
|
|
static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
|
|
.eccbytes = 5,
|
|
.eccpos = {6, 7, 8, 9, 10},
|
|
.oobfree = {{0, 5}, {12, 4}, }
|
|
};
|
|
|
|
static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
|
|
.eccbytes = 20,
|
|
.eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
|
|
38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
|
|
.oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
|
|
};
|
|
|
|
/* OOB description for 512 byte pages with 16 byte OOB */
|
|
static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
|
|
.eccbytes = 1 * 9,
|
|
.eccpos = {
|
|
7, 8, 9, 10, 11, 12, 13, 14, 15
|
|
},
|
|
.oobfree = {
|
|
{.offset = 0, .length = 5}
|
|
}
|
|
};
|
|
|
|
/* OOB description for 2048 byte pages with 64 byte OOB */
|
|
static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
|
|
.eccbytes = 4 * 9,
|
|
.eccpos = {
|
|
7, 8, 9, 10, 11, 12, 13, 14, 15,
|
|
23, 24, 25, 26, 27, 28, 29, 30, 31,
|
|
39, 40, 41, 42, 43, 44, 45, 46, 47,
|
|
55, 56, 57, 58, 59, 60, 61, 62, 63
|
|
},
|
|
.oobfree = {
|
|
{.offset = 2, .length = 4},
|
|
{.offset = 16, .length = 7},
|
|
{.offset = 32, .length = 7},
|
|
{.offset = 48, .length = 7}
|
|
}
|
|
};
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
|
|
#endif
|
|
|
|
static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
|
|
{
|
|
struct mxc_nand_host *host = dev_id;
|
|
|
|
if (!host->check_int(host))
|
|
return IRQ_NONE;
|
|
|
|
host->irq_control(host, 0);
|
|
|
|
complete(&host->op_completion);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int check_int_v3(struct mxc_nand_host *host)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = readl(NFC_V3_IPC);
|
|
if (!(tmp & NFC_V3_IPC_INT))
|
|
return 0;
|
|
|
|
tmp &= ~NFC_V3_IPC_INT;
|
|
writel(tmp, NFC_V3_IPC);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int check_int_v1_v2(struct mxc_nand_host *host)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = readw(NFC_V1_V2_CONFIG2);
|
|
if (!(tmp & NFC_V1_V2_CONFIG2_INT))
|
|
return 0;
|
|
|
|
if (!cpu_is_mx21())
|
|
writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* It has been observed that the i.MX21 cannot read the CONFIG2:INT bit
|
|
* if interrupts are masked (CONFIG1:INT_MSK is set). To handle this, the
|
|
* driver can enable/disable the irq line rather than simply masking the
|
|
* interrupts.
|
|
*/
|
|
static void irq_control_mx21(struct mxc_nand_host *host, int activate)
|
|
{
|
|
if (activate)
|
|
enable_irq(host->irq);
|
|
else
|
|
disable_irq_nosync(host->irq);
|
|
}
|
|
|
|
static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
|
|
{
|
|
uint16_t tmp;
|
|
|
|
tmp = readw(NFC_V1_V2_CONFIG1);
|
|
|
|
if (activate)
|
|
tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
|
|
else
|
|
tmp |= NFC_V1_V2_CONFIG1_INT_MSK;
|
|
|
|
writew(tmp, NFC_V1_V2_CONFIG1);
|
|
}
|
|
|
|
static void irq_control_v3(struct mxc_nand_host *host, int activate)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = readl(NFC_V3_CONFIG2);
|
|
|
|
if (activate)
|
|
tmp &= ~NFC_V3_CONFIG2_INT_MSK;
|
|
else
|
|
tmp |= NFC_V3_CONFIG2_INT_MSK;
|
|
|
|
writel(tmp, NFC_V3_CONFIG2);
|
|
}
|
|
|
|
/* This function polls the NANDFC to wait for the basic operation to
|
|
* complete by checking the INT bit of config2 register.
|
|
*/
|
|
static void wait_op_done(struct mxc_nand_host *host, int useirq)
|
|
{
|
|
int max_retries = 8000;
|
|
|
|
if (useirq) {
|
|
if (!host->check_int(host)) {
|
|
INIT_COMPLETION(host->op_completion);
|
|
host->irq_control(host, 1);
|
|
wait_for_completion(&host->op_completion);
|
|
}
|
|
} else {
|
|
while (max_retries-- > 0) {
|
|
if (host->check_int(host))
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
if (max_retries < 0)
|
|
DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
|
|
__func__);
|
|
}
|
|
}
|
|
|
|
static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
|
|
{
|
|
/* fill command */
|
|
writel(cmd, NFC_V3_FLASH_CMD);
|
|
|
|
/* send out command */
|
|
writel(NFC_CMD, NFC_V3_LAUNCH);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, useirq);
|
|
}
|
|
|
|
/* This function issues the specified command to the NAND device and
|
|
* waits for completion. */
|
|
static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
|
|
{
|
|
DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
|
|
|
|
writew(cmd, NFC_V1_V2_FLASH_CMD);
|
|
writew(NFC_CMD, NFC_V1_V2_CONFIG2);
|
|
|
|
if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
|
|
int max_retries = 100;
|
|
/* Reset completion is indicated by NFC_CONFIG2 */
|
|
/* being set to 0 */
|
|
while (max_retries-- > 0) {
|
|
if (readw(NFC_V1_V2_CONFIG2) == 0) {
|
|
break;
|
|
}
|
|
udelay(1);
|
|
}
|
|
if (max_retries < 0)
|
|
DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
|
|
__func__);
|
|
} else {
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, useirq);
|
|
}
|
|
}
|
|
|
|
static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
|
|
{
|
|
/* fill address */
|
|
writel(addr, NFC_V3_FLASH_ADDR0);
|
|
|
|
/* send out address */
|
|
writel(NFC_ADDR, NFC_V3_LAUNCH);
|
|
|
|
wait_op_done(host, 0);
|
|
}
|
|
|
|
/* This function sends an address (or partial address) to the
|
|
* NAND device. The address is used to select the source/destination for
|
|
* a NAND command. */
|
|
static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
|
|
{
|
|
DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
|
|
|
|
writew(addr, NFC_V1_V2_FLASH_ADDR);
|
|
writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, islast);
|
|
}
|
|
|
|
static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
uint32_t tmp;
|
|
|
|
tmp = readl(NFC_V3_CONFIG1);
|
|
tmp &= ~(7 << 4);
|
|
writel(tmp, NFC_V3_CONFIG1);
|
|
|
|
/* transfer data from NFC ram to nand */
|
|
writel(ops, NFC_V3_LAUNCH);
|
|
|
|
wait_op_done(host, false);
|
|
}
|
|
|
|
static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
int bufs, i;
|
|
|
|
if (nfc_is_v1() && mtd->writesize > 512)
|
|
bufs = 4;
|
|
else
|
|
bufs = 1;
|
|
|
|
for (i = 0; i < bufs; i++) {
|
|
|
|
/* NANDFC buffer 0 is used for page read/write */
|
|
writew(i, NFC_V1_V2_BUF_ADDR);
|
|
|
|
writew(ops, NFC_V1_V2_CONFIG2);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, true);
|
|
}
|
|
}
|
|
|
|
static void send_read_id_v3(struct mxc_nand_host *host)
|
|
{
|
|
/* Read ID into main buffer */
|
|
writel(NFC_ID, NFC_V3_LAUNCH);
|
|
|
|
wait_op_done(host, true);
|
|
|
|
memcpy(host->data_buf, host->main_area0, 16);
|
|
}
|
|
|
|
/* Request the NANDFC to perform a read of the NAND device ID. */
|
|
static void send_read_id_v1_v2(struct mxc_nand_host *host)
|
|
{
|
|
struct nand_chip *this = &host->nand;
|
|
|
|
/* NANDFC buffer 0 is used for device ID output */
|
|
writew(0x0, NFC_V1_V2_BUF_ADDR);
|
|
|
|
writew(NFC_ID, NFC_V1_V2_CONFIG2);
|
|
|
|
/* Wait for operation to complete */
|
|
wait_op_done(host, true);
|
|
|
|
memcpy(host->data_buf, host->main_area0, 16);
|
|
|
|
if (this->options & NAND_BUSWIDTH_16) {
|
|
/* compress the ID info */
|
|
host->data_buf[1] = host->data_buf[2];
|
|
host->data_buf[2] = host->data_buf[4];
|
|
host->data_buf[3] = host->data_buf[6];
|
|
host->data_buf[4] = host->data_buf[8];
|
|
host->data_buf[5] = host->data_buf[10];
|
|
}
|
|
}
|
|
|
|
static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
|
|
{
|
|
writew(NFC_STATUS, NFC_V3_LAUNCH);
|
|
wait_op_done(host, true);
|
|
|
|
return readl(NFC_V3_CONFIG1) >> 16;
|
|
}
|
|
|
|
/* This function requests the NANDFC to perform a read of the
|
|
* NAND device status and returns the current status. */
|
|
static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
|
|
{
|
|
void __iomem *main_buf = host->main_area0;
|
|
uint32_t store;
|
|
uint16_t ret;
|
|
|
|
writew(0x0, NFC_V1_V2_BUF_ADDR);
|
|
|
|
/*
|
|
* The device status is stored in main_area0. To
|
|
* prevent corruption of the buffer save the value
|
|
* and restore it afterwards.
|
|
*/
|
|
store = readl(main_buf);
|
|
|
|
writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
|
|
wait_op_done(host, true);
|
|
|
|
ret = readw(main_buf);
|
|
|
|
writel(store, main_buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* This functions is used by upper layer to checks if device is ready */
|
|
static int mxc_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
/*
|
|
* NFC handles R/B internally. Therefore, this function
|
|
* always returns status as ready.
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
|
|
{
|
|
/*
|
|
* If HW ECC is enabled, we turn it on during init. There is
|
|
* no need to enable again here.
|
|
*/
|
|
}
|
|
|
|
static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
|
|
u_char *read_ecc, u_char *calc_ecc)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
|
|
/*
|
|
* 1-Bit errors are automatically corrected in HW. No need for
|
|
* additional correction. 2-Bit errors cannot be corrected by
|
|
* HW ECC, so we need to return failure
|
|
*/
|
|
uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
|
|
|
|
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
|
|
DEBUG(MTD_DEBUG_LEVEL0,
|
|
"MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
|
|
u_char *read_ecc, u_char *calc_ecc)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
u32 ecc_stat, err;
|
|
int no_subpages = 1;
|
|
int ret = 0;
|
|
u8 ecc_bit_mask, err_limit;
|
|
|
|
ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
|
|
err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
|
|
|
|
no_subpages = mtd->writesize >> 9;
|
|
|
|
if (nfc_is_v21())
|
|
ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT);
|
|
else
|
|
ecc_stat = readl(NFC_V3_ECC_STATUS_RESULT);
|
|
|
|
do {
|
|
err = ecc_stat & ecc_bit_mask;
|
|
if (err > err_limit) {
|
|
printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
|
|
return -1;
|
|
} else {
|
|
ret += err;
|
|
}
|
|
ecc_stat >>= 4;
|
|
} while (--no_subpages);
|
|
|
|
mtd->ecc_stats.corrected += ret;
|
|
pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
|
|
u_char *ecc_code)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static u_char mxc_nand_read_byte(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
uint8_t ret;
|
|
|
|
/* Check for status request */
|
|
if (host->status_request)
|
|
return host->get_dev_status(host) & 0xFF;
|
|
|
|
ret = *(uint8_t *)(host->data_buf + host->buf_start);
|
|
host->buf_start++;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
uint16_t ret;
|
|
|
|
ret = *(uint16_t *)(host->data_buf + host->buf_start);
|
|
host->buf_start += 2;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Write data of length len to buffer buf. The data to be
|
|
* written on NAND Flash is first copied to RAMbuffer. After the Data Input
|
|
* Operation by the NFC, the data is written to NAND Flash */
|
|
static void mxc_nand_write_buf(struct mtd_info *mtd,
|
|
const u_char *buf, int len)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
u16 col = host->buf_start;
|
|
int n = mtd->oobsize + mtd->writesize - col;
|
|
|
|
n = min(n, len);
|
|
|
|
memcpy(host->data_buf + col, buf, n);
|
|
|
|
host->buf_start += n;
|
|
}
|
|
|
|
/* Read the data buffer from the NAND Flash. To read the data from NAND
|
|
* Flash first the data output cycle is initiated by the NFC, which copies
|
|
* the data to RAMbuffer. This data of length len is then copied to buffer buf.
|
|
*/
|
|
static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
u16 col = host->buf_start;
|
|
int n = mtd->oobsize + mtd->writesize - col;
|
|
|
|
n = min(n, len);
|
|
|
|
memcpy(buf, host->data_buf + col, len);
|
|
|
|
host->buf_start += len;
|
|
}
|
|
|
|
/* Used by the upper layer to verify the data in NAND Flash
|
|
* with the data in the buf. */
|
|
static int mxc_nand_verify_buf(struct mtd_info *mtd,
|
|
const u_char *buf, int len)
|
|
{
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* This function is used by upper layer for select and
|
|
* deselect of the NAND chip */
|
|
static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
|
|
switch (chip) {
|
|
case -1:
|
|
/* Disable the NFC clock */
|
|
if (host->clk_act) {
|
|
clk_disable(host->clk);
|
|
host->clk_act = 0;
|
|
}
|
|
break;
|
|
case 0:
|
|
/* Enable the NFC clock */
|
|
if (!host->clk_act) {
|
|
clk_enable(host->clk);
|
|
host->clk_act = 1;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Function to transfer data to/from spare area.
|
|
*/
|
|
static void copy_spare(struct mtd_info *mtd, bool bfrom)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
struct mxc_nand_host *host = this->priv;
|
|
u16 i, j;
|
|
u16 n = mtd->writesize >> 9;
|
|
u8 *d = host->data_buf + mtd->writesize;
|
|
u8 *s = host->spare0;
|
|
u16 t = host->spare_len;
|
|
|
|
j = (mtd->oobsize / n >> 1) << 1;
|
|
|
|
if (bfrom) {
|
|
for (i = 0; i < n - 1; i++)
|
|
memcpy(d + i * j, s + i * t, j);
|
|
|
|
/* the last section */
|
|
memcpy(d + i * j, s + i * t, mtd->oobsize - i * j);
|
|
} else {
|
|
for (i = 0; i < n - 1; i++)
|
|
memcpy(&s[i * t], &d[i * j], j);
|
|
|
|
/* the last section */
|
|
memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j);
|
|
}
|
|
}
|
|
|
|
static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
|
|
/* Write out column address, if necessary */
|
|
if (column != -1) {
|
|
/*
|
|
* MXC NANDFC can only perform full page+spare or
|
|
* spare-only read/write. When the upper layers
|
|
* layers perform a read/write buf operation,
|
|
* we will used the saved column address to index into
|
|
* the full page.
|
|
*/
|
|
host->send_addr(host, 0, page_addr == -1);
|
|
if (mtd->writesize > 512)
|
|
/* another col addr cycle for 2k page */
|
|
host->send_addr(host, 0, false);
|
|
}
|
|
|
|
/* Write out page address, if necessary */
|
|
if (page_addr != -1) {
|
|
/* paddr_0 - p_addr_7 */
|
|
host->send_addr(host, (page_addr & 0xff), false);
|
|
|
|
if (mtd->writesize > 512) {
|
|
if (mtd->size >= 0x10000000) {
|
|
/* paddr_8 - paddr_15 */
|
|
host->send_addr(host, (page_addr >> 8) & 0xff, false);
|
|
host->send_addr(host, (page_addr >> 16) & 0xff, true);
|
|
} else
|
|
/* paddr_8 - paddr_15 */
|
|
host->send_addr(host, (page_addr >> 8) & 0xff, true);
|
|
} else {
|
|
/* One more address cycle for higher density devices */
|
|
if (mtd->size >= 0x4000000) {
|
|
/* paddr_8 - paddr_15 */
|
|
host->send_addr(host, (page_addr >> 8) & 0xff, false);
|
|
host->send_addr(host, (page_addr >> 16) & 0xff, true);
|
|
} else
|
|
/* paddr_8 - paddr_15 */
|
|
host->send_addr(host, (page_addr >> 8) & 0xff, true);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* v2 and v3 type controllers can do 4bit or 8bit ecc depending
|
|
* on how much oob the nand chip has. For 8bit ecc we need at least
|
|
* 26 bytes of oob data per 512 byte block.
|
|
*/
|
|
static int get_eccsize(struct mtd_info *mtd)
|
|
{
|
|
int oobbytes_per_512 = 0;
|
|
|
|
oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
|
|
|
|
if (oobbytes_per_512 < 26)
|
|
return 4;
|
|
else
|
|
return 8;
|
|
}
|
|
|
|
static void preset_v1_v2(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
uint16_t config1 = 0;
|
|
|
|
if (nand_chip->ecc.mode == NAND_ECC_HW)
|
|
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
|
|
|
|
if (nfc_is_v21())
|
|
config1 |= NFC_V2_CONFIG1_FP_INT;
|
|
|
|
if (!cpu_is_mx21())
|
|
config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
|
|
|
|
if (nfc_is_v21() && mtd->writesize) {
|
|
uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
|
|
|
|
host->eccsize = get_eccsize(mtd);
|
|
if (host->eccsize == 4)
|
|
config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
|
|
|
|
config1 |= NFC_V2_CONFIG1_PPB(ffs(pages_per_block) - 6);
|
|
} else {
|
|
host->eccsize = 1;
|
|
}
|
|
|
|
writew(config1, NFC_V1_V2_CONFIG1);
|
|
/* preset operation */
|
|
|
|
/* Unlock the internal RAM Buffer */
|
|
writew(0x2, NFC_V1_V2_CONFIG);
|
|
|
|
/* Blocks to be unlocked */
|
|
if (nfc_is_v21()) {
|
|
writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR);
|
|
writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR);
|
|
} else if (nfc_is_v1()) {
|
|
writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
|
|
writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
|
|
} else
|
|
BUG();
|
|
|
|
/* Unlock Block Command for given address range */
|
|
writew(0x4, NFC_V1_V2_WRPROT);
|
|
}
|
|
|
|
static void preset_v3(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct mxc_nand_host *host = chip->priv;
|
|
uint32_t config2, config3;
|
|
int i, addr_phases;
|
|
|
|
writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
|
|
writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
|
|
|
|
/* Unlock the internal RAM Buffer */
|
|
writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
|
|
NFC_V3_WRPROT);
|
|
|
|
/* Blocks to be unlocked */
|
|
for (i = 0; i < NAND_MAX_CHIPS; i++)
|
|
writel(0x0 | (0xffff << 16),
|
|
NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
|
|
|
|
writel(0, NFC_V3_IPC);
|
|
|
|
config2 = NFC_V3_CONFIG2_ONE_CYCLE |
|
|
NFC_V3_CONFIG2_2CMD_PHASES |
|
|
NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
|
|
NFC_V3_CONFIG2_ST_CMD(0x70) |
|
|
NFC_V3_CONFIG2_INT_MSK |
|
|
NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
|
|
|
|
if (chip->ecc.mode == NAND_ECC_HW)
|
|
config2 |= NFC_V3_CONFIG2_ECC_EN;
|
|
|
|
addr_phases = fls(chip->pagemask) >> 3;
|
|
|
|
if (mtd->writesize == 2048) {
|
|
config2 |= NFC_V3_CONFIG2_PS_2048;
|
|
config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
|
|
} else if (mtd->writesize == 4096) {
|
|
config2 |= NFC_V3_CONFIG2_PS_4096;
|
|
config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
|
|
} else {
|
|
config2 |= NFC_V3_CONFIG2_PS_512;
|
|
config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
|
|
}
|
|
|
|
if (mtd->writesize) {
|
|
config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6);
|
|
host->eccsize = get_eccsize(mtd);
|
|
if (host->eccsize == 8)
|
|
config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
|
|
}
|
|
|
|
writel(config2, NFC_V3_CONFIG2);
|
|
|
|
config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
|
|
NFC_V3_CONFIG3_NO_SDMA |
|
|
NFC_V3_CONFIG3_RBB_MODE |
|
|
NFC_V3_CONFIG3_SBB(6) | /* Reset default */
|
|
NFC_V3_CONFIG3_ADD_OP(0);
|
|
|
|
if (!(chip->options & NAND_BUSWIDTH_16))
|
|
config3 |= NFC_V3_CONFIG3_FW8;
|
|
|
|
writel(config3, NFC_V3_CONFIG3);
|
|
|
|
writel(0, NFC_V3_DELAY_LINE);
|
|
}
|
|
|
|
/* Used by the upper layer to write command to NAND Flash for
|
|
* different operations to be carried out on NAND Flash */
|
|
static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
|
|
int column, int page_addr)
|
|
{
|
|
struct nand_chip *nand_chip = mtd->priv;
|
|
struct mxc_nand_host *host = nand_chip->priv;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL3,
|
|
"mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
|
|
command, column, page_addr);
|
|
|
|
/* Reset command state information */
|
|
host->status_request = false;
|
|
|
|
/* Command pre-processing step */
|
|
switch (command) {
|
|
case NAND_CMD_RESET:
|
|
host->preset(mtd);
|
|
host->send_cmd(host, command, false);
|
|
break;
|
|
|
|
case NAND_CMD_STATUS:
|
|
host->buf_start = 0;
|
|
host->status_request = true;
|
|
|
|
host->send_cmd(host, command, true);
|
|
mxc_do_addr_cycle(mtd, column, page_addr);
|
|
break;
|
|
|
|
case NAND_CMD_READ0:
|
|
case NAND_CMD_READOOB:
|
|
if (command == NAND_CMD_READ0)
|
|
host->buf_start = column;
|
|
else
|
|
host->buf_start = column + mtd->writesize;
|
|
|
|
command = NAND_CMD_READ0; /* only READ0 is valid */
|
|
|
|
host->send_cmd(host, command, false);
|
|
mxc_do_addr_cycle(mtd, column, page_addr);
|
|
|
|
if (mtd->writesize > 512)
|
|
host->send_cmd(host, NAND_CMD_READSTART, true);
|
|
|
|
host->send_page(mtd, NFC_OUTPUT);
|
|
|
|
memcpy(host->data_buf, host->main_area0, mtd->writesize);
|
|
copy_spare(mtd, true);
|
|
break;
|
|
|
|
case NAND_CMD_SEQIN:
|
|
if (column >= mtd->writesize)
|
|
/* call ourself to read a page */
|
|
mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
|
|
|
|
host->buf_start = column;
|
|
|
|
host->send_cmd(host, command, false);
|
|
mxc_do_addr_cycle(mtd, column, page_addr);
|
|
break;
|
|
|
|
case NAND_CMD_PAGEPROG:
|
|
memcpy(host->main_area0, host->data_buf, mtd->writesize);
|
|
copy_spare(mtd, false);
|
|
host->send_page(mtd, NFC_INPUT);
|
|
host->send_cmd(host, command, true);
|
|
mxc_do_addr_cycle(mtd, column, page_addr);
|
|
break;
|
|
|
|
case NAND_CMD_READID:
|
|
host->send_cmd(host, command, true);
|
|
mxc_do_addr_cycle(mtd, column, page_addr);
|
|
host->send_read_id(host);
|
|
host->buf_start = column;
|
|
break;
|
|
|
|
case NAND_CMD_ERASE1:
|
|
case NAND_CMD_ERASE2:
|
|
host->send_cmd(host, command, false);
|
|
mxc_do_addr_cycle(mtd, column, page_addr);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The generic flash bbt decriptors overlap with our ecc
|
|
* hardware, so define some i.MX specific ones.
|
|
*/
|
|
static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
|
|
static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
|
|
|
|
static struct nand_bbt_descr bbt_main_descr = {
|
|
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
|
|
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
|
|
.offs = 0,
|
|
.len = 4,
|
|
.veroffs = 4,
|
|
.maxblocks = 4,
|
|
.pattern = bbt_pattern,
|
|
};
|
|
|
|
static struct nand_bbt_descr bbt_mirror_descr = {
|
|
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
|
|
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
|
|
.offs = 0,
|
|
.len = 4,
|
|
.veroffs = 4,
|
|
.maxblocks = 4,
|
|
.pattern = mirror_pattern,
|
|
};
|
|
|
|
static int __init mxcnd_probe(struct platform_device *pdev)
|
|
{
|
|
struct nand_chip *this;
|
|
struct mtd_info *mtd;
|
|
struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
|
|
struct mxc_nand_host *host;
|
|
struct resource *res;
|
|
int err = 0, __maybe_unused nr_parts = 0;
|
|
struct nand_ecclayout *oob_smallpage, *oob_largepage;
|
|
|
|
/* Allocate memory for MTD device structure and private data */
|
|
host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
|
|
NAND_MAX_OOBSIZE, GFP_KERNEL);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
host->data_buf = (uint8_t *)(host + 1);
|
|
|
|
host->dev = &pdev->dev;
|
|
/* structures must be linked */
|
|
this = &host->nand;
|
|
mtd = &host->mtd;
|
|
mtd->priv = this;
|
|
mtd->owner = THIS_MODULE;
|
|
mtd->dev.parent = &pdev->dev;
|
|
mtd->name = DRIVER_NAME;
|
|
|
|
/* 50 us command delay time */
|
|
this->chip_delay = 5;
|
|
|
|
this->priv = host;
|
|
this->dev_ready = mxc_nand_dev_ready;
|
|
this->cmdfunc = mxc_nand_command;
|
|
this->select_chip = mxc_nand_select_chip;
|
|
this->read_byte = mxc_nand_read_byte;
|
|
this->read_word = mxc_nand_read_word;
|
|
this->write_buf = mxc_nand_write_buf;
|
|
this->read_buf = mxc_nand_read_buf;
|
|
this->verify_buf = mxc_nand_verify_buf;
|
|
|
|
host->clk = clk_get(&pdev->dev, "nfc");
|
|
if (IS_ERR(host->clk)) {
|
|
err = PTR_ERR(host->clk);
|
|
goto eclk;
|
|
}
|
|
|
|
clk_enable(host->clk);
|
|
host->clk_act = 1;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
err = -ENODEV;
|
|
goto eres;
|
|
}
|
|
|
|
host->base = ioremap(res->start, resource_size(res));
|
|
if (!host->base) {
|
|
err = -ENOMEM;
|
|
goto eres;
|
|
}
|
|
|
|
host->main_area0 = host->base;
|
|
|
|
if (nfc_is_v1() || nfc_is_v21()) {
|
|
host->preset = preset_v1_v2;
|
|
host->send_cmd = send_cmd_v1_v2;
|
|
host->send_addr = send_addr_v1_v2;
|
|
host->send_page = send_page_v1_v2;
|
|
host->send_read_id = send_read_id_v1_v2;
|
|
host->get_dev_status = get_dev_status_v1_v2;
|
|
host->check_int = check_int_v1_v2;
|
|
if (cpu_is_mx21())
|
|
host->irq_control = irq_control_mx21;
|
|
else
|
|
host->irq_control = irq_control_v1_v2;
|
|
}
|
|
|
|
if (nfc_is_v21()) {
|
|
host->regs = host->base + 0x1e00;
|
|
host->spare0 = host->base + 0x1000;
|
|
host->spare_len = 64;
|
|
oob_smallpage = &nandv2_hw_eccoob_smallpage;
|
|
oob_largepage = &nandv2_hw_eccoob_largepage;
|
|
this->ecc.bytes = 9;
|
|
} else if (nfc_is_v1()) {
|
|
host->regs = host->base + 0xe00;
|
|
host->spare0 = host->base + 0x800;
|
|
host->spare_len = 16;
|
|
oob_smallpage = &nandv1_hw_eccoob_smallpage;
|
|
oob_largepage = &nandv1_hw_eccoob_largepage;
|
|
this->ecc.bytes = 3;
|
|
host->eccsize = 1;
|
|
} else if (nfc_is_v3_2()) {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (!res) {
|
|
err = -ENODEV;
|
|
goto eirq;
|
|
}
|
|
host->regs_ip = ioremap(res->start, resource_size(res));
|
|
if (!host->regs_ip) {
|
|
err = -ENOMEM;
|
|
goto eirq;
|
|
}
|
|
host->regs_axi = host->base + 0x1e00;
|
|
host->spare0 = host->base + 0x1000;
|
|
host->spare_len = 64;
|
|
host->preset = preset_v3;
|
|
host->send_cmd = send_cmd_v3;
|
|
host->send_addr = send_addr_v3;
|
|
host->send_page = send_page_v3;
|
|
host->send_read_id = send_read_id_v3;
|
|
host->check_int = check_int_v3;
|
|
host->get_dev_status = get_dev_status_v3;
|
|
host->irq_control = irq_control_v3;
|
|
oob_smallpage = &nandv2_hw_eccoob_smallpage;
|
|
oob_largepage = &nandv2_hw_eccoob_largepage;
|
|
} else
|
|
BUG();
|
|
|
|
this->ecc.size = 512;
|
|
this->ecc.layout = oob_smallpage;
|
|
|
|
if (pdata->hw_ecc) {
|
|
this->ecc.calculate = mxc_nand_calculate_ecc;
|
|
this->ecc.hwctl = mxc_nand_enable_hwecc;
|
|
if (nfc_is_v1())
|
|
this->ecc.correct = mxc_nand_correct_data_v1;
|
|
else
|
|
this->ecc.correct = mxc_nand_correct_data_v2_v3;
|
|
this->ecc.mode = NAND_ECC_HW;
|
|
} else {
|
|
this->ecc.mode = NAND_ECC_SOFT;
|
|
}
|
|
|
|
/* NAND bus width determines access funtions used by upper layer */
|
|
if (pdata->width == 2)
|
|
this->options |= NAND_BUSWIDTH_16;
|
|
|
|
if (pdata->flash_bbt) {
|
|
this->bbt_td = &bbt_main_descr;
|
|
this->bbt_md = &bbt_mirror_descr;
|
|
/* update flash based bbt */
|
|
this->options |= NAND_USE_FLASH_BBT;
|
|
}
|
|
|
|
init_completion(&host->op_completion);
|
|
|
|
host->irq = platform_get_irq(pdev, 0);
|
|
|
|
/*
|
|
* mask the interrupt. For i.MX21 explicitely call
|
|
* irq_control_v1_v2 to use the mask bit. We can't call
|
|
* disable_irq_nosync() for an interrupt we do not own yet.
|
|
*/
|
|
if (cpu_is_mx21())
|
|
irq_control_v1_v2(host, 0);
|
|
else
|
|
host->irq_control(host, 0);
|
|
|
|
err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
|
|
if (err)
|
|
goto eirq;
|
|
|
|
host->irq_control(host, 0);
|
|
|
|
/*
|
|
* Now that the interrupt is disabled make sure the interrupt
|
|
* mask bit is cleared on i.MX21. Otherwise we can't read
|
|
* the interrupt status bit on this machine.
|
|
*/
|
|
if (cpu_is_mx21())
|
|
irq_control_v1_v2(host, 1);
|
|
|
|
/* first scan to find the device and get the page size */
|
|
if (nand_scan_ident(mtd, 1, NULL)) {
|
|
err = -ENXIO;
|
|
goto escan;
|
|
}
|
|
|
|
/* Call preset again, with correct writesize this time */
|
|
host->preset(mtd);
|
|
|
|
if (mtd->writesize == 2048)
|
|
this->ecc.layout = oob_largepage;
|
|
|
|
/* second phase scan */
|
|
if (nand_scan_tail(mtd)) {
|
|
err = -ENXIO;
|
|
goto escan;
|
|
}
|
|
|
|
/* Register the partitions */
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
nr_parts =
|
|
parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
|
|
if (nr_parts > 0)
|
|
add_mtd_partitions(mtd, host->parts, nr_parts);
|
|
else if (pdata->parts)
|
|
add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
|
|
else
|
|
#endif
|
|
{
|
|
pr_info("Registering %s as whole device\n", mtd->name);
|
|
add_mtd_device(mtd);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
return 0;
|
|
|
|
escan:
|
|
free_irq(host->irq, host);
|
|
eirq:
|
|
if (host->regs_ip)
|
|
iounmap(host->regs_ip);
|
|
iounmap(host->base);
|
|
eres:
|
|
clk_put(host->clk);
|
|
eclk:
|
|
kfree(host);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int __devexit mxcnd_remove(struct platform_device *pdev)
|
|
{
|
|
struct mxc_nand_host *host = platform_get_drvdata(pdev);
|
|
|
|
clk_put(host->clk);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
nand_release(&host->mtd);
|
|
free_irq(host->irq, host);
|
|
if (host->regs_ip)
|
|
iounmap(host->regs_ip);
|
|
iounmap(host->base);
|
|
kfree(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mxcnd_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
},
|
|
.remove = __devexit_p(mxcnd_remove),
|
|
};
|
|
|
|
static int __init mxc_nd_init(void)
|
|
{
|
|
return platform_driver_probe(&mxcnd_driver, mxcnd_probe);
|
|
}
|
|
|
|
static void __exit mxc_nd_cleanup(void)
|
|
{
|
|
/* Unregister the device structure */
|
|
platform_driver_unregister(&mxcnd_driver);
|
|
}
|
|
|
|
module_init(mxc_nd_init);
|
|
module_exit(mxc_nd_cleanup);
|
|
|
|
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
|
|
MODULE_DESCRIPTION("MXC NAND MTD driver");
|
|
MODULE_LICENSE("GPL");
|