![Kulikov Vasiliy](/assets/img/avatar_default.png)
Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
983 lines
25 KiB
C
983 lines
25 KiB
C
/*
|
|
* Atmel AT45xxx DataFlash MTD driver for lightweight SPI framework
|
|
*
|
|
* Largely derived from at91_dataflash.c:
|
|
* Copyright (C) 2003-2005 SAN People (Pty) Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/err.h>
|
|
#include <linux/math64.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/flash.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
|
|
/*
|
|
* DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in
|
|
* each chip, which may be used for double buffered I/O; but this driver
|
|
* doesn't (yet) use these for any kind of i/o overlap or prefetching.
|
|
*
|
|
* Sometimes DataFlash is packaged in MMC-format cards, although the
|
|
* MMC stack can't (yet?) distinguish between MMC and DataFlash
|
|
* protocols during enumeration.
|
|
*/
|
|
|
|
/* reads can bypass the buffers */
|
|
#define OP_READ_CONTINUOUS 0xE8
|
|
#define OP_READ_PAGE 0xD2
|
|
|
|
/* group B requests can run even while status reports "busy" */
|
|
#define OP_READ_STATUS 0xD7 /* group B */
|
|
|
|
/* move data between host and buffer */
|
|
#define OP_READ_BUFFER1 0xD4 /* group B */
|
|
#define OP_READ_BUFFER2 0xD6 /* group B */
|
|
#define OP_WRITE_BUFFER1 0x84 /* group B */
|
|
#define OP_WRITE_BUFFER2 0x87 /* group B */
|
|
|
|
/* erasing flash */
|
|
#define OP_ERASE_PAGE 0x81
|
|
#define OP_ERASE_BLOCK 0x50
|
|
|
|
/* move data between buffer and flash */
|
|
#define OP_TRANSFER_BUF1 0x53
|
|
#define OP_TRANSFER_BUF2 0x55
|
|
#define OP_MREAD_BUFFER1 0xD4
|
|
#define OP_MREAD_BUFFER2 0xD6
|
|
#define OP_MWERASE_BUFFER1 0x83
|
|
#define OP_MWERASE_BUFFER2 0x86
|
|
#define OP_MWRITE_BUFFER1 0x88 /* sector must be pre-erased */
|
|
#define OP_MWRITE_BUFFER2 0x89 /* sector must be pre-erased */
|
|
|
|
/* write to buffer, then write-erase to flash */
|
|
#define OP_PROGRAM_VIA_BUF1 0x82
|
|
#define OP_PROGRAM_VIA_BUF2 0x85
|
|
|
|
/* compare buffer to flash */
|
|
#define OP_COMPARE_BUF1 0x60
|
|
#define OP_COMPARE_BUF2 0x61
|
|
|
|
/* read flash to buffer, then write-erase to flash */
|
|
#define OP_REWRITE_VIA_BUF1 0x58
|
|
#define OP_REWRITE_VIA_BUF2 0x59
|
|
|
|
/* newer chips report JEDEC manufacturer and device IDs; chip
|
|
* serial number and OTP bits; and per-sector writeprotect.
|
|
*/
|
|
#define OP_READ_ID 0x9F
|
|
#define OP_READ_SECURITY 0x77
|
|
#define OP_WRITE_SECURITY_REVC 0x9A
|
|
#define OP_WRITE_SECURITY 0x9B /* revision D */
|
|
|
|
|
|
struct dataflash {
|
|
uint8_t command[4];
|
|
char name[24];
|
|
|
|
unsigned partitioned:1;
|
|
|
|
unsigned short page_offset; /* offset in flash address */
|
|
unsigned int page_size; /* of bytes per page */
|
|
|
|
struct mutex lock;
|
|
struct spi_device *spi;
|
|
|
|
struct mtd_info mtd;
|
|
};
|
|
|
|
/* ......................................................................... */
|
|
|
|
/*
|
|
* Return the status of the DataFlash device.
|
|
*/
|
|
static inline int dataflash_status(struct spi_device *spi)
|
|
{
|
|
/* NOTE: at45db321c over 25 MHz wants to write
|
|
* a dummy byte after the opcode...
|
|
*/
|
|
return spi_w8r8(spi, OP_READ_STATUS);
|
|
}
|
|
|
|
/*
|
|
* Poll the DataFlash device until it is READY.
|
|
* This usually takes 5-20 msec or so; more for sector erase.
|
|
*/
|
|
static int dataflash_waitready(struct spi_device *spi)
|
|
{
|
|
int status;
|
|
|
|
for (;;) {
|
|
status = dataflash_status(spi);
|
|
if (status < 0) {
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: status %d?\n",
|
|
dev_name(&spi->dev), status);
|
|
status = 0;
|
|
}
|
|
|
|
if (status & (1 << 7)) /* RDY/nBSY */
|
|
return status;
|
|
|
|
msleep(3);
|
|
}
|
|
}
|
|
|
|
/* ......................................................................... */
|
|
|
|
/*
|
|
* Erase pages of flash.
|
|
*/
|
|
static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
|
|
{
|
|
struct dataflash *priv = mtd->priv;
|
|
struct spi_device *spi = priv->spi;
|
|
struct spi_transfer x = { .tx_dma = 0, };
|
|
struct spi_message msg;
|
|
unsigned blocksize = priv->page_size << 3;
|
|
uint8_t *command;
|
|
uint32_t rem;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%llx len 0x%llx\n",
|
|
dev_name(&spi->dev), (long long)instr->addr,
|
|
(long long)instr->len);
|
|
|
|
/* Sanity checks */
|
|
if (instr->addr + instr->len > mtd->size)
|
|
return -EINVAL;
|
|
div_u64_rem(instr->len, priv->page_size, &rem);
|
|
if (rem)
|
|
return -EINVAL;
|
|
div_u64_rem(instr->addr, priv->page_size, &rem);
|
|
if (rem)
|
|
return -EINVAL;
|
|
|
|
spi_message_init(&msg);
|
|
|
|
x.tx_buf = command = priv->command;
|
|
x.len = 4;
|
|
spi_message_add_tail(&x, &msg);
|
|
|
|
mutex_lock(&priv->lock);
|
|
while (instr->len > 0) {
|
|
unsigned int pageaddr;
|
|
int status;
|
|
int do_block;
|
|
|
|
/* Calculate flash page address; use block erase (for speed) if
|
|
* we're at a block boundary and need to erase the whole block.
|
|
*/
|
|
pageaddr = div_u64(instr->addr, priv->page_size);
|
|
do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
|
|
pageaddr = pageaddr << priv->page_offset;
|
|
|
|
command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
|
|
command[1] = (uint8_t)(pageaddr >> 16);
|
|
command[2] = (uint8_t)(pageaddr >> 8);
|
|
command[3] = 0;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
|
|
do_block ? "block" : "page",
|
|
command[0], command[1], command[2], command[3],
|
|
pageaddr);
|
|
|
|
status = spi_sync(spi, &msg);
|
|
(void) dataflash_waitready(spi);
|
|
|
|
if (status < 0) {
|
|
printk(KERN_ERR "%s: erase %x, err %d\n",
|
|
dev_name(&spi->dev), pageaddr, status);
|
|
/* REVISIT: can retry instr->retries times; or
|
|
* giveup and instr->fail_addr = instr->addr;
|
|
*/
|
|
continue;
|
|
}
|
|
|
|
if (do_block) {
|
|
instr->addr += blocksize;
|
|
instr->len -= blocksize;
|
|
} else {
|
|
instr->addr += priv->page_size;
|
|
instr->len -= priv->page_size;
|
|
}
|
|
}
|
|
mutex_unlock(&priv->lock);
|
|
|
|
/* Inform MTD subsystem that erase is complete */
|
|
instr->state = MTD_ERASE_DONE;
|
|
mtd_erase_callback(instr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read from the DataFlash device.
|
|
* from : Start offset in flash device
|
|
* len : Amount to read
|
|
* retlen : About of data actually read
|
|
* buf : Buffer containing the data
|
|
*/
|
|
static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
|
|
size_t *retlen, u_char *buf)
|
|
{
|
|
struct dataflash *priv = mtd->priv;
|
|
struct spi_transfer x[2] = { { .tx_dma = 0, }, };
|
|
struct spi_message msg;
|
|
unsigned int addr;
|
|
uint8_t *command;
|
|
int status;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
|
|
dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len));
|
|
|
|
*retlen = 0;
|
|
|
|
/* Sanity checks */
|
|
if (!len)
|
|
return 0;
|
|
if (from + len > mtd->size)
|
|
return -EINVAL;
|
|
|
|
/* Calculate flash page/byte address */
|
|
addr = (((unsigned)from / priv->page_size) << priv->page_offset)
|
|
+ ((unsigned)from % priv->page_size);
|
|
|
|
command = priv->command;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n",
|
|
command[0], command[1], command[2], command[3]);
|
|
|
|
spi_message_init(&msg);
|
|
|
|
x[0].tx_buf = command;
|
|
x[0].len = 8;
|
|
spi_message_add_tail(&x[0], &msg);
|
|
|
|
x[1].rx_buf = buf;
|
|
x[1].len = len;
|
|
spi_message_add_tail(&x[1], &msg);
|
|
|
|
mutex_lock(&priv->lock);
|
|
|
|
/* Continuous read, max clock = f(car) which may be less than
|
|
* the peak rate available. Some chips support commands with
|
|
* fewer "don't care" bytes. Both buffers stay unchanged.
|
|
*/
|
|
command[0] = OP_READ_CONTINUOUS;
|
|
command[1] = (uint8_t)(addr >> 16);
|
|
command[2] = (uint8_t)(addr >> 8);
|
|
command[3] = (uint8_t)(addr >> 0);
|
|
/* plus 4 "don't care" bytes */
|
|
|
|
status = spi_sync(priv->spi, &msg);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
if (status >= 0) {
|
|
*retlen = msg.actual_length - 8;
|
|
status = 0;
|
|
} else
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: read %x..%x --> %d\n",
|
|
dev_name(&priv->spi->dev),
|
|
(unsigned)from, (unsigned)(from + len),
|
|
status);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Write to the DataFlash device.
|
|
* to : Start offset in flash device
|
|
* len : Amount to write
|
|
* retlen : Amount of data actually written
|
|
* buf : Buffer containing the data
|
|
*/
|
|
static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
|
|
size_t * retlen, const u_char * buf)
|
|
{
|
|
struct dataflash *priv = mtd->priv;
|
|
struct spi_device *spi = priv->spi;
|
|
struct spi_transfer x[2] = { { .tx_dma = 0, }, };
|
|
struct spi_message msg;
|
|
unsigned int pageaddr, addr, offset, writelen;
|
|
size_t remaining = len;
|
|
u_char *writebuf = (u_char *) buf;
|
|
int status = -EINVAL;
|
|
uint8_t *command;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
|
|
dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
|
|
|
|
*retlen = 0;
|
|
|
|
/* Sanity checks */
|
|
if (!len)
|
|
return 0;
|
|
if ((to + len) > mtd->size)
|
|
return -EINVAL;
|
|
|
|
spi_message_init(&msg);
|
|
|
|
x[0].tx_buf = command = priv->command;
|
|
x[0].len = 4;
|
|
spi_message_add_tail(&x[0], &msg);
|
|
|
|
pageaddr = ((unsigned)to / priv->page_size);
|
|
offset = ((unsigned)to % priv->page_size);
|
|
if (offset + len > priv->page_size)
|
|
writelen = priv->page_size - offset;
|
|
else
|
|
writelen = len;
|
|
|
|
mutex_lock(&priv->lock);
|
|
while (remaining > 0) {
|
|
DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
|
|
pageaddr, offset, writelen);
|
|
|
|
/* REVISIT:
|
|
* (a) each page in a sector must be rewritten at least
|
|
* once every 10K sibling erase/program operations.
|
|
* (b) for pages that are already erased, we could
|
|
* use WRITE+MWRITE not PROGRAM for ~30% speedup.
|
|
* (c) WRITE to buffer could be done while waiting for
|
|
* a previous MWRITE/MWERASE to complete ...
|
|
* (d) error handling here seems to be mostly missing.
|
|
*
|
|
* Two persistent bits per page, plus a per-sector counter,
|
|
* could support (a) and (b) ... we might consider using
|
|
* the second half of sector zero, which is just one block,
|
|
* to track that state. (On AT91, that sector should also
|
|
* support boot-from-DataFlash.)
|
|
*/
|
|
|
|
addr = pageaddr << priv->page_offset;
|
|
|
|
/* (1) Maybe transfer partial page to Buffer1 */
|
|
if (writelen != priv->page_size) {
|
|
command[0] = OP_TRANSFER_BUF1;
|
|
command[1] = (addr & 0x00FF0000) >> 16;
|
|
command[2] = (addr & 0x0000FF00) >> 8;
|
|
command[3] = 0;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n",
|
|
command[0], command[1], command[2], command[3]);
|
|
|
|
status = spi_sync(spi, &msg);
|
|
if (status < 0)
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n",
|
|
dev_name(&spi->dev), addr, status);
|
|
|
|
(void) dataflash_waitready(priv->spi);
|
|
}
|
|
|
|
/* (2) Program full page via Buffer1 */
|
|
addr += offset;
|
|
command[0] = OP_PROGRAM_VIA_BUF1;
|
|
command[1] = (addr & 0x00FF0000) >> 16;
|
|
command[2] = (addr & 0x0000FF00) >> 8;
|
|
command[3] = (addr & 0x000000FF);
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL3, "PROGRAM: (%x) %x %x %x\n",
|
|
command[0], command[1], command[2], command[3]);
|
|
|
|
x[1].tx_buf = writebuf;
|
|
x[1].len = writelen;
|
|
spi_message_add_tail(x + 1, &msg);
|
|
status = spi_sync(spi, &msg);
|
|
spi_transfer_del(x + 1);
|
|
if (status < 0)
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n",
|
|
dev_name(&spi->dev), addr, writelen, status);
|
|
|
|
(void) dataflash_waitready(priv->spi);
|
|
|
|
|
|
#ifdef CONFIG_MTD_DATAFLASH_WRITE_VERIFY
|
|
|
|
/* (3) Compare to Buffer1 */
|
|
addr = pageaddr << priv->page_offset;
|
|
command[0] = OP_COMPARE_BUF1;
|
|
command[1] = (addr & 0x00FF0000) >> 16;
|
|
command[2] = (addr & 0x0000FF00) >> 8;
|
|
command[3] = 0;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n",
|
|
command[0], command[1], command[2], command[3]);
|
|
|
|
status = spi_sync(spi, &msg);
|
|
if (status < 0)
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n",
|
|
dev_name(&spi->dev), addr, status);
|
|
|
|
status = dataflash_waitready(priv->spi);
|
|
|
|
/* Check result of the compare operation */
|
|
if (status & (1 << 6)) {
|
|
printk(KERN_ERR "%s: compare page %u, err %d\n",
|
|
dev_name(&spi->dev), pageaddr, status);
|
|
remaining = 0;
|
|
status = -EIO;
|
|
break;
|
|
} else
|
|
status = 0;
|
|
|
|
#endif /* CONFIG_MTD_DATAFLASH_WRITE_VERIFY */
|
|
|
|
remaining = remaining - writelen;
|
|
pageaddr++;
|
|
offset = 0;
|
|
writebuf += writelen;
|
|
*retlen += writelen;
|
|
|
|
if (remaining > priv->page_size)
|
|
writelen = priv->page_size;
|
|
else
|
|
writelen = remaining;
|
|
}
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* ......................................................................... */
|
|
|
|
#ifdef CONFIG_MTD_DATAFLASH_OTP
|
|
|
|
static int dataflash_get_otp_info(struct mtd_info *mtd,
|
|
struct otp_info *info, size_t len)
|
|
{
|
|
/* Report both blocks as identical: bytes 0..64, locked.
|
|
* Unless the user block changed from all-ones, we can't
|
|
* tell whether it's still writable; so we assume it isn't.
|
|
*/
|
|
info->start = 0;
|
|
info->length = 64;
|
|
info->locked = 1;
|
|
return sizeof(*info);
|
|
}
|
|
|
|
static ssize_t otp_read(struct spi_device *spi, unsigned base,
|
|
uint8_t *buf, loff_t off, size_t len)
|
|
{
|
|
struct spi_message m;
|
|
size_t l;
|
|
uint8_t *scratch;
|
|
struct spi_transfer t;
|
|
int status;
|
|
|
|
if (off > 64)
|
|
return -EINVAL;
|
|
|
|
if ((off + len) > 64)
|
|
len = 64 - off;
|
|
if (len == 0)
|
|
return len;
|
|
|
|
spi_message_init(&m);
|
|
|
|
l = 4 + base + off + len;
|
|
scratch = kzalloc(l, GFP_KERNEL);
|
|
if (!scratch)
|
|
return -ENOMEM;
|
|
|
|
/* OUT: OP_READ_SECURITY, 3 don't-care bytes, zeroes
|
|
* IN: ignore 4 bytes, data bytes 0..N (max 127)
|
|
*/
|
|
scratch[0] = OP_READ_SECURITY;
|
|
|
|
memset(&t, 0, sizeof t);
|
|
t.tx_buf = scratch;
|
|
t.rx_buf = scratch;
|
|
t.len = l;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
dataflash_waitready(spi);
|
|
|
|
status = spi_sync(spi, &m);
|
|
if (status >= 0) {
|
|
memcpy(buf, scratch + 4 + base + off, len);
|
|
status = len;
|
|
}
|
|
|
|
kfree(scratch);
|
|
return status;
|
|
}
|
|
|
|
static int dataflash_read_fact_otp(struct mtd_info *mtd,
|
|
loff_t from, size_t len, size_t *retlen, u_char *buf)
|
|
{
|
|
struct dataflash *priv = mtd->priv;
|
|
int status;
|
|
|
|
/* 64 bytes, from 0..63 ... start at 64 on-chip */
|
|
mutex_lock(&priv->lock);
|
|
status = otp_read(priv->spi, 64, buf, from, len);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
if (status < 0)
|
|
return status;
|
|
*retlen = status;
|
|
return 0;
|
|
}
|
|
|
|
static int dataflash_read_user_otp(struct mtd_info *mtd,
|
|
loff_t from, size_t len, size_t *retlen, u_char *buf)
|
|
{
|
|
struct dataflash *priv = mtd->priv;
|
|
int status;
|
|
|
|
/* 64 bytes, from 0..63 ... start at 0 on-chip */
|
|
mutex_lock(&priv->lock);
|
|
status = otp_read(priv->spi, 0, buf, from, len);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
if (status < 0)
|
|
return status;
|
|
*retlen = status;
|
|
return 0;
|
|
}
|
|
|
|
static int dataflash_write_user_otp(struct mtd_info *mtd,
|
|
loff_t from, size_t len, size_t *retlen, u_char *buf)
|
|
{
|
|
struct spi_message m;
|
|
const size_t l = 4 + 64;
|
|
uint8_t *scratch;
|
|
struct spi_transfer t;
|
|
struct dataflash *priv = mtd->priv;
|
|
int status;
|
|
|
|
if (len > 64)
|
|
return -EINVAL;
|
|
|
|
/* Strictly speaking, we *could* truncate the write ... but
|
|
* let's not do that for the only write that's ever possible.
|
|
*/
|
|
if ((from + len) > 64)
|
|
return -EINVAL;
|
|
|
|
/* OUT: OP_WRITE_SECURITY, 3 zeroes, 64 data-or-zero bytes
|
|
* IN: ignore all
|
|
*/
|
|
scratch = kzalloc(l, GFP_KERNEL);
|
|
if (!scratch)
|
|
return -ENOMEM;
|
|
scratch[0] = OP_WRITE_SECURITY;
|
|
memcpy(scratch + 4 + from, buf, len);
|
|
|
|
spi_message_init(&m);
|
|
|
|
memset(&t, 0, sizeof t);
|
|
t.tx_buf = scratch;
|
|
t.len = l;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
/* Write the OTP bits, if they've not yet been written.
|
|
* This modifies SRAM buffer1.
|
|
*/
|
|
mutex_lock(&priv->lock);
|
|
dataflash_waitready(priv->spi);
|
|
status = spi_sync(priv->spi, &m);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
kfree(scratch);
|
|
|
|
if (status >= 0) {
|
|
status = 0;
|
|
*retlen = len;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static char *otp_setup(struct mtd_info *device, char revision)
|
|
{
|
|
device->get_fact_prot_info = dataflash_get_otp_info;
|
|
device->read_fact_prot_reg = dataflash_read_fact_otp;
|
|
device->get_user_prot_info = dataflash_get_otp_info;
|
|
device->read_user_prot_reg = dataflash_read_user_otp;
|
|
|
|
/* rev c parts (at45db321c and at45db1281 only!) use a
|
|
* different write procedure; not (yet?) implemented.
|
|
*/
|
|
if (revision > 'c')
|
|
device->write_user_prot_reg = dataflash_write_user_otp;
|
|
|
|
return ", OTP";
|
|
}
|
|
|
|
#else
|
|
|
|
static char *otp_setup(struct mtd_info *device, char revision)
|
|
{
|
|
return " (OTP)";
|
|
}
|
|
|
|
#endif
|
|
|
|
/* ......................................................................... */
|
|
|
|
/*
|
|
* Register DataFlash device with MTD subsystem.
|
|
*/
|
|
static int __devinit
|
|
add_dataflash_otp(struct spi_device *spi, char *name,
|
|
int nr_pages, int pagesize, int pageoffset, char revision)
|
|
{
|
|
struct dataflash *priv;
|
|
struct mtd_info *device;
|
|
struct flash_platform_data *pdata = spi->dev.platform_data;
|
|
char *otp_tag = "";
|
|
int err = 0;
|
|
|
|
priv = kzalloc(sizeof *priv, GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&priv->lock);
|
|
priv->spi = spi;
|
|
priv->page_size = pagesize;
|
|
priv->page_offset = pageoffset;
|
|
|
|
/* name must be usable with cmdlinepart */
|
|
sprintf(priv->name, "spi%d.%d-%s",
|
|
spi->master->bus_num, spi->chip_select,
|
|
name);
|
|
|
|
device = &priv->mtd;
|
|
device->name = (pdata && pdata->name) ? pdata->name : priv->name;
|
|
device->size = nr_pages * pagesize;
|
|
device->erasesize = pagesize;
|
|
device->writesize = pagesize;
|
|
device->owner = THIS_MODULE;
|
|
device->type = MTD_DATAFLASH;
|
|
device->flags = MTD_WRITEABLE;
|
|
device->erase = dataflash_erase;
|
|
device->read = dataflash_read;
|
|
device->write = dataflash_write;
|
|
device->priv = priv;
|
|
|
|
device->dev.parent = &spi->dev;
|
|
|
|
if (revision >= 'c')
|
|
otp_tag = otp_setup(device, revision);
|
|
|
|
dev_info(&spi->dev, "%s (%lld KBytes) pagesize %d bytes%s\n",
|
|
name, (long long)((device->size + 1023) >> 10),
|
|
pagesize, otp_tag);
|
|
dev_set_drvdata(&spi->dev, priv);
|
|
|
|
if (mtd_has_partitions()) {
|
|
struct mtd_partition *parts;
|
|
int nr_parts = 0;
|
|
|
|
if (mtd_has_cmdlinepart()) {
|
|
static const char *part_probes[]
|
|
= { "cmdlinepart", NULL, };
|
|
|
|
nr_parts = parse_mtd_partitions(device,
|
|
part_probes, &parts, 0);
|
|
}
|
|
|
|
if (nr_parts <= 0 && pdata && pdata->parts) {
|
|
parts = pdata->parts;
|
|
nr_parts = pdata->nr_parts;
|
|
}
|
|
|
|
if (nr_parts > 0) {
|
|
priv->partitioned = 1;
|
|
err = add_mtd_partitions(device, parts, nr_parts);
|
|
goto out;
|
|
}
|
|
} else if (pdata && pdata->nr_parts)
|
|
dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
|
|
pdata->nr_parts, device->name);
|
|
|
|
if (add_mtd_device(device) == 1)
|
|
err = -ENODEV;
|
|
|
|
out:
|
|
if (!err)
|
|
return 0;
|
|
|
|
dev_set_drvdata(&spi->dev, NULL);
|
|
kfree(priv);
|
|
return err;
|
|
}
|
|
|
|
static inline int __devinit
|
|
add_dataflash(struct spi_device *spi, char *name,
|
|
int nr_pages, int pagesize, int pageoffset)
|
|
{
|
|
return add_dataflash_otp(spi, name, nr_pages, pagesize,
|
|
pageoffset, 0);
|
|
}
|
|
|
|
struct flash_info {
|
|
char *name;
|
|
|
|
/* JEDEC id has a high byte of zero plus three data bytes:
|
|
* the manufacturer id, then a two byte device id.
|
|
*/
|
|
uint32_t jedec_id;
|
|
|
|
/* The size listed here is what works with OP_ERASE_PAGE. */
|
|
unsigned nr_pages;
|
|
uint16_t pagesize;
|
|
uint16_t pageoffset;
|
|
|
|
uint16_t flags;
|
|
#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */
|
|
#define IS_POW2PS 0x0001 /* uses 2^N byte pages */
|
|
};
|
|
|
|
static struct flash_info __devinitdata dataflash_data [] = {
|
|
|
|
/*
|
|
* NOTE: chips with SUP_POW2PS (rev D and up) need two entries,
|
|
* one with IS_POW2PS and the other without. The entry with the
|
|
* non-2^N byte page size can't name exact chip revisions without
|
|
* losing backwards compatibility for cmdlinepart.
|
|
*
|
|
* These newer chips also support 128-byte security registers (with
|
|
* 64 bytes one-time-programmable) and software write-protection.
|
|
*/
|
|
{ "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS},
|
|
{ "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
|
|
|
|
{ "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS},
|
|
{ "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
|
|
|
|
{ "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS},
|
|
{ "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
|
|
|
|
{ "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS},
|
|
{ "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
|
|
|
|
{ "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS},
|
|
{ "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
|
|
|
|
{ "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */
|
|
|
|
{ "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS},
|
|
{ "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
|
|
|
|
{ "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
|
|
{ "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
|
|
};
|
|
|
|
static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
|
|
{
|
|
int tmp;
|
|
uint8_t code = OP_READ_ID;
|
|
uint8_t id[3];
|
|
uint32_t jedec;
|
|
struct flash_info *info;
|
|
int status;
|
|
|
|
/* JEDEC also defines an optional "extended device information"
|
|
* string for after vendor-specific data, after the three bytes
|
|
* we use here. Supporting some chips might require using it.
|
|
*
|
|
* If the vendor ID isn't Atmel's (0x1f), assume this call failed.
|
|
* That's not an error; only rev C and newer chips handle it, and
|
|
* only Atmel sells these chips.
|
|
*/
|
|
tmp = spi_write_then_read(spi, &code, 1, id, 3);
|
|
if (tmp < 0) {
|
|
DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
|
|
dev_name(&spi->dev), tmp);
|
|
return ERR_PTR(tmp);
|
|
}
|
|
if (id[0] != 0x1f)
|
|
return NULL;
|
|
|
|
jedec = id[0];
|
|
jedec = jedec << 8;
|
|
jedec |= id[1];
|
|
jedec = jedec << 8;
|
|
jedec |= id[2];
|
|
|
|
for (tmp = 0, info = dataflash_data;
|
|
tmp < ARRAY_SIZE(dataflash_data);
|
|
tmp++, info++) {
|
|
if (info->jedec_id == jedec) {
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
|
|
dev_name(&spi->dev),
|
|
(info->flags & SUP_POW2PS)
|
|
? ", binary pagesize" : ""
|
|
);
|
|
if (info->flags & SUP_POW2PS) {
|
|
status = dataflash_status(spi);
|
|
if (status < 0) {
|
|
DEBUG(MTD_DEBUG_LEVEL1,
|
|
"%s: status error %d\n",
|
|
dev_name(&spi->dev), status);
|
|
return ERR_PTR(status);
|
|
}
|
|
if (status & 0x1) {
|
|
if (info->flags & IS_POW2PS)
|
|
return info;
|
|
} else {
|
|
if (!(info->flags & IS_POW2PS))
|
|
return info;
|
|
}
|
|
} else
|
|
return info;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Treat other chips as errors ... we won't know the right page
|
|
* size (it might be binary) even when we can tell which density
|
|
* class is involved (legacy chip id scheme).
|
|
*/
|
|
dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
/*
|
|
* Detect and initialize DataFlash device, using JEDEC IDs on newer chips
|
|
* or else the ID code embedded in the status bits:
|
|
*
|
|
* Device Density ID code #Pages PageSize Offset
|
|
* AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
|
|
* AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9
|
|
* AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
|
|
* AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
|
|
* AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
|
|
* AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
|
|
* AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11
|
|
* AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
|
|
*/
|
|
static int __devinit dataflash_probe(struct spi_device *spi)
|
|
{
|
|
int status;
|
|
struct flash_info *info;
|
|
|
|
/*
|
|
* Try to detect dataflash by JEDEC ID.
|
|
* If it succeeds we know we have either a C or D part.
|
|
* D will support power of 2 pagesize option.
|
|
* Both support the security register, though with different
|
|
* write procedures.
|
|
*/
|
|
info = jedec_probe(spi);
|
|
if (IS_ERR(info))
|
|
return PTR_ERR(info);
|
|
if (info != NULL)
|
|
return add_dataflash_otp(spi, info->name, info->nr_pages,
|
|
info->pagesize, info->pageoffset,
|
|
(info->flags & SUP_POW2PS) ? 'd' : 'c');
|
|
|
|
/*
|
|
* Older chips support only legacy commands, identifing
|
|
* capacity using bits in the status byte.
|
|
*/
|
|
status = dataflash_status(spi);
|
|
if (status <= 0 || status == 0xff) {
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
|
|
dev_name(&spi->dev), status);
|
|
if (status == 0 || status == 0xff)
|
|
status = -ENODEV;
|
|
return status;
|
|
}
|
|
|
|
/* if there's a device there, assume it's dataflash.
|
|
* board setup should have set spi->max_speed_max to
|
|
* match f(car) for continuous reads, mode 0 or 3.
|
|
*/
|
|
switch (status & 0x3c) {
|
|
case 0x0c: /* 0 0 1 1 x x */
|
|
status = add_dataflash(spi, "AT45DB011B", 512, 264, 9);
|
|
break;
|
|
case 0x14: /* 0 1 0 1 x x */
|
|
status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
|
|
break;
|
|
case 0x1c: /* 0 1 1 1 x x */
|
|
status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
|
|
break;
|
|
case 0x24: /* 1 0 0 1 x x */
|
|
status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
|
|
break;
|
|
case 0x2c: /* 1 0 1 1 x x */
|
|
status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
|
|
break;
|
|
case 0x34: /* 1 1 0 1 x x */
|
|
status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
|
|
break;
|
|
case 0x38: /* 1 1 1 x x x */
|
|
case 0x3c:
|
|
status = add_dataflash(spi, "AT45DB642x", 8192, 1056, 11);
|
|
break;
|
|
/* obsolete AT45DB1282 not (yet?) supported */
|
|
default:
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: unsupported device (%x)\n",
|
|
dev_name(&spi->dev), status & 0x3c);
|
|
status = -ENODEV;
|
|
}
|
|
|
|
if (status < 0)
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: add_dataflash --> %d\n",
|
|
dev_name(&spi->dev), status);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int __devexit dataflash_remove(struct spi_device *spi)
|
|
{
|
|
struct dataflash *flash = dev_get_drvdata(&spi->dev);
|
|
int status;
|
|
|
|
DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", dev_name(&spi->dev));
|
|
|
|
if (mtd_has_partitions() && flash->partitioned)
|
|
status = del_mtd_partitions(&flash->mtd);
|
|
else
|
|
status = del_mtd_device(&flash->mtd);
|
|
if (status == 0) {
|
|
dev_set_drvdata(&spi->dev, NULL);
|
|
kfree(flash);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static struct spi_driver dataflash_driver = {
|
|
.driver = {
|
|
.name = "mtd_dataflash",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
|
|
.probe = dataflash_probe,
|
|
.remove = __devexit_p(dataflash_remove),
|
|
|
|
/* FIXME: investigate suspend and resume... */
|
|
};
|
|
|
|
static int __init dataflash_init(void)
|
|
{
|
|
return spi_register_driver(&dataflash_driver);
|
|
}
|
|
module_init(dataflash_init);
|
|
|
|
static void __exit dataflash_exit(void)
|
|
{
|
|
spi_unregister_driver(&dataflash_driver);
|
|
}
|
|
module_exit(dataflash_exit);
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Andrew Victor, David Brownell");
|
|
MODULE_DESCRIPTION("MTD DataFlash driver");
|
|
MODULE_ALIAS("spi:mtd_dataflash");
|