![Tejun Heo](/assets/img/avatar_default.png)
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
422 lines
13 KiB
C
422 lines
13 KiB
C
/*
|
|
** -----------------------------------------------------------------------------
|
|
**
|
|
** Perle Specialix driver for Linux
|
|
** Ported from existing RIO Driver for SCO sources.
|
|
*
|
|
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
**
|
|
** Module : rioinit.c
|
|
** SID : 1.3
|
|
** Last Modified : 11/6/98 10:33:43
|
|
** Retrieved : 11/6/98 10:33:49
|
|
**
|
|
** ident @(#)rioinit.c 1.3
|
|
**
|
|
** -----------------------------------------------------------------------------
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/string.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <linux/termios.h>
|
|
#include <linux/serial.h>
|
|
|
|
#include <linux/generic_serial.h>
|
|
|
|
|
|
#include "linux_compat.h"
|
|
#include "pkt.h"
|
|
#include "daemon.h"
|
|
#include "rio.h"
|
|
#include "riospace.h"
|
|
#include "cmdpkt.h"
|
|
#include "map.h"
|
|
#include "rup.h"
|
|
#include "port.h"
|
|
#include "riodrvr.h"
|
|
#include "rioinfo.h"
|
|
#include "func.h"
|
|
#include "errors.h"
|
|
#include "pci.h"
|
|
|
|
#include "parmmap.h"
|
|
#include "unixrup.h"
|
|
#include "board.h"
|
|
#include "host.h"
|
|
#include "phb.h"
|
|
#include "link.h"
|
|
#include "cmdblk.h"
|
|
#include "route.h"
|
|
#include "cirrus.h"
|
|
#include "rioioctl.h"
|
|
#include "rio_linux.h"
|
|
|
|
int RIOPCIinit(struct rio_info *p, int Mode);
|
|
|
|
static int RIOScrub(int, u8 __iomem *, int);
|
|
|
|
|
|
/**
|
|
** RIOAssignAT :
|
|
**
|
|
** Fill out the fields in the p->RIOHosts structure now we know we know
|
|
** we have a board present.
|
|
**
|
|
** bits < 0 indicates 8 bit operation requested,
|
|
** bits > 0 indicates 16 bit operation.
|
|
*/
|
|
|
|
int RIOAssignAT(struct rio_info *p, int Base, void __iomem *virtAddr, int mode)
|
|
{
|
|
int bits;
|
|
struct DpRam __iomem *cardp = (struct DpRam __iomem *)virtAddr;
|
|
|
|
if ((Base < ONE_MEG) || (mode & BYTE_ACCESS_MODE))
|
|
bits = BYTE_OPERATION;
|
|
else
|
|
bits = WORD_OPERATION;
|
|
|
|
/*
|
|
** Board has passed its scrub test. Fill in all the
|
|
** transient stuff.
|
|
*/
|
|
p->RIOHosts[p->RIONumHosts].Caddr = virtAddr;
|
|
p->RIOHosts[p->RIONumHosts].CardP = virtAddr;
|
|
|
|
/*
|
|
** Revision 01 AT host cards don't support WORD operations,
|
|
*/
|
|
if (readb(&cardp->DpRevision) == 01)
|
|
bits = BYTE_OPERATION;
|
|
|
|
p->RIOHosts[p->RIONumHosts].Type = RIO_AT;
|
|
p->RIOHosts[p->RIONumHosts].Copy = rio_copy_to_card;
|
|
/* set this later */
|
|
p->RIOHosts[p->RIONumHosts].Slot = -1;
|
|
p->RIOHosts[p->RIONumHosts].Mode = SLOW_LINKS | SLOW_AT_BUS | bits;
|
|
writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE ,
|
|
&p->RIOHosts[p->RIONumHosts].Control);
|
|
writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt);
|
|
writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE,
|
|
&p->RIOHosts[p->RIONumHosts].Control);
|
|
writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt);
|
|
p->RIOHosts[p->RIONumHosts].UniqueNum =
|
|
((readb(&p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)|
|
|
((readb(&p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)|
|
|
((readb(&p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)|
|
|
((readb(&p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24);
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Uniquenum 0x%x\n",p->RIOHosts[p->RIONumHosts].UniqueNum);
|
|
|
|
p->RIONumHosts++;
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base);
|
|
return(1);
|
|
}
|
|
|
|
static u8 val[] = {
|
|
#ifdef VERY_LONG_TEST
|
|
0x00, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80,
|
|
0xa5, 0xff, 0x5a, 0x00, 0xff, 0xc9, 0x36,
|
|
#endif
|
|
0xff, 0x00, 0x00 };
|
|
|
|
#define TEST_END sizeof(val)
|
|
|
|
/*
|
|
** RAM test a board.
|
|
** Nothing too complicated, just enough to check it out.
|
|
*/
|
|
int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, int slot)
|
|
{
|
|
struct DpRam __iomem *DpRam = caddr;
|
|
void __iomem *ram[4];
|
|
int size[4];
|
|
int op, bank;
|
|
int nbanks;
|
|
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Reset host type=%d, DpRam=%p, slot=%d\n",
|
|
type, DpRam, slot);
|
|
|
|
RIOHostReset(type, DpRam, slot);
|
|
|
|
/*
|
|
** Scrub the memory. This comes in several banks:
|
|
** DPsram1 - 7000h bytes
|
|
** DPsram2 - 200h bytes
|
|
** DPsram3 - 7000h bytes
|
|
** scratch - 1000h bytes
|
|
*/
|
|
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Setup ram/size arrays\n");
|
|
|
|
size[0] = DP_SRAM1_SIZE;
|
|
size[1] = DP_SRAM2_SIZE;
|
|
size[2] = DP_SRAM3_SIZE;
|
|
size[3] = DP_SCRATCH_SIZE;
|
|
|
|
ram[0] = DpRam->DpSram1;
|
|
ram[1] = DpRam->DpSram2;
|
|
ram[2] = DpRam->DpSram3;
|
|
nbanks = (type == RIO_PCI) ? 3 : 4;
|
|
if (nbanks == 4)
|
|
ram[3] = DpRam->DpScratch;
|
|
|
|
|
|
if (nbanks == 3) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Memory: %p(0x%x), %p(0x%x), %p(0x%x)\n",
|
|
ram[0], size[0], ram[1], size[1], ram[2], size[2]);
|
|
} else {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: %p(0x%x), %p(0x%x), %p(0x%x), %p(0x%x)\n",
|
|
ram[0], size[0], ram[1], size[1], ram[2], size[2], ram[3], size[3]);
|
|
}
|
|
|
|
/*
|
|
** This scrub operation will test for crosstalk between
|
|
** banks. TEST_END is a magic number, and relates to the offset
|
|
** within the 'val' array used by Scrub.
|
|
*/
|
|
for (op=0; op<TEST_END; op++) {
|
|
for (bank=0; bank<nbanks; bank++) {
|
|
if (RIOScrub(op, ram[bank], size[bank]) == RIO_FAIL) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: RIOScrub band %d, op %d failed\n",
|
|
bank, op);
|
|
return RIO_FAIL;
|
|
}
|
|
}
|
|
}
|
|
|
|
rio_dprintk (RIO_DEBUG_INIT, "Test completed\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
** Scrub an area of RAM.
|
|
** Define PRETEST and POSTTEST for a more thorough checking of the
|
|
** state of the memory.
|
|
** Call with op set to an index into the above 'val' array to determine
|
|
** which value will be written into memory.
|
|
** Call with op set to zero means that the RAM will not be read and checked
|
|
** before it is written.
|
|
** Call with op not zero and the RAM will be read and compared with val[op-1]
|
|
** to check that the data from the previous phase was retained.
|
|
*/
|
|
|
|
static int RIOScrub(int op, u8 __iomem *ram, int size)
|
|
{
|
|
int off;
|
|
unsigned char oldbyte;
|
|
unsigned char newbyte;
|
|
unsigned char invbyte;
|
|
unsigned short oldword;
|
|
unsigned short newword;
|
|
unsigned short invword;
|
|
unsigned short swapword;
|
|
|
|
if (op) {
|
|
oldbyte = val[op-1];
|
|
oldword = oldbyte | (oldbyte<<8);
|
|
} else
|
|
oldbyte = oldword = 0; /* Tell the compiler we've initilalized them. */
|
|
newbyte = val[op];
|
|
newword = newbyte | (newbyte<<8);
|
|
invbyte = ~newbyte;
|
|
invword = invbyte | (invbyte<<8);
|
|
|
|
/*
|
|
** Check that the RAM contains the value that should have been left there
|
|
** by the previous test (not applicable for pass zero)
|
|
*/
|
|
if (op) {
|
|
for (off=0; off<size; off++) {
|
|
if (readb(ram + off) != oldbyte) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 1: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, readb(ram + off));
|
|
return RIO_FAIL;
|
|
}
|
|
}
|
|
for (off=0; off<size; off+=2) {
|
|
if (readw(ram + off) != oldword) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: WORD at offset 0x%x should have been=%x, was=%x\n",off,oldword, readw(ram + off));
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram+off+1));
|
|
return RIO_FAIL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
** Now write the INVERSE of the test data into every location, using
|
|
** BYTE write operations, first checking before each byte is written
|
|
** that the location contains the old value still, and checking after
|
|
** the write that the location contains the data specified - this is
|
|
** the BYTE read/write test.
|
|
*/
|
|
for (off=0; off<size; off++) {
|
|
if (op && (readb(ram + off) != oldbyte)) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, readb(ram + off));
|
|
return RIO_FAIL;
|
|
}
|
|
writeb(invbyte, ram + off);
|
|
if (readb(ram + off) != invbyte) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Inv Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, invbyte, readb(ram + off));
|
|
return RIO_FAIL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
** now, use WORD operations to write the test value into every location,
|
|
** check as before that the location contains the previous test value
|
|
** before overwriting, and that it contains the data value written
|
|
** afterwards.
|
|
** This is the WORD operation test.
|
|
*/
|
|
for (off=0; off<size; off+=2) {
|
|
if (readw(ram + off) != invword) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: WORD at offset 0x%x should have been=%x, was=%x\n", off, invword, readw(ram + off));
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram+off+1));
|
|
return RIO_FAIL;
|
|
}
|
|
|
|
writew(newword, ram + off);
|
|
if ( readw(ram + off) != newword ) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, readw(ram + off));
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
|
|
return RIO_FAIL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
** now run through the block of memory again, first in byte mode
|
|
** then in word mode, and check that all the locations contain the
|
|
** required test data.
|
|
*/
|
|
for (off=0; off<size; off++) {
|
|
if (readb(ram + off) != newbyte) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Byte Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, readb(ram + off));
|
|
return RIO_FAIL;
|
|
}
|
|
}
|
|
|
|
for (off=0; off<size; off+=2) {
|
|
if (readw(ram + off) != newword ) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, readw(ram + off));
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
|
|
return RIO_FAIL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
** time to check out byte swapping errors
|
|
*/
|
|
swapword = invbyte | (newbyte << 8);
|
|
|
|
for (off=0; off<size; off+=2) {
|
|
writeb(invbyte, &ram[off]);
|
|
writeb(newbyte, &ram[off+1]);
|
|
}
|
|
|
|
for ( off=0; off<size; off+=2 ) {
|
|
if (readw(ram + off) != swapword) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, swapword, readw(ram + off));
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
|
|
return RIO_FAIL;
|
|
}
|
|
writew(~swapword, ram + off);
|
|
}
|
|
|
|
for (off=0; off<size; off+=2) {
|
|
if (readb(ram + off) != newbyte) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, readb(ram + off));
|
|
return RIO_FAIL;
|
|
}
|
|
if (readb(ram + off + 1) != invbyte) {
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off+1, invbyte, readb(ram + off + 1));
|
|
return RIO_FAIL;
|
|
}
|
|
writew(newword, ram + off);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
int RIODefaultName(struct rio_info *p, struct Host *HostP, unsigned int UnitId)
|
|
{
|
|
memcpy(HostP->Mapping[UnitId].Name, "UNKNOWN RTA X-XX", 17);
|
|
HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts);
|
|
if ((UnitId+1) > 9) {
|
|
HostP->Mapping[UnitId].Name[14]='0'+((UnitId+1)/10);
|
|
HostP->Mapping[UnitId].Name[15]='0'+((UnitId+1)%10);
|
|
}
|
|
else {
|
|
HostP->Mapping[UnitId].Name[14]='1'+UnitId;
|
|
HostP->Mapping[UnitId].Name[15]=0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define RIO_RELEASE "Linux"
|
|
#define RELEASE_ID "1.0"
|
|
|
|
static struct rioVersion stVersion;
|
|
|
|
struct rioVersion *RIOVersid(void)
|
|
{
|
|
strlcpy(stVersion.version, "RIO driver for linux V1.0",
|
|
sizeof(stVersion.version));
|
|
strlcpy(stVersion.buildDate, __DATE__,
|
|
sizeof(stVersion.buildDate));
|
|
|
|
return &stVersion;
|
|
}
|
|
|
|
void RIOHostReset(unsigned int Type, struct DpRam __iomem *DpRamP, unsigned int Slot)
|
|
{
|
|
/*
|
|
** Reset the Tpu
|
|
*/
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: type 0x%x", Type);
|
|
switch ( Type ) {
|
|
case RIO_AT:
|
|
rio_dprintk (RIO_DEBUG_INIT, " (RIO_AT)\n");
|
|
writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | BYTE_OPERATION |
|
|
SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl);
|
|
writeb(0xFF, &DpRamP->DpResetTpu);
|
|
udelay(3);
|
|
rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: Don't know if it worked. Try reset again\n");
|
|
writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE |
|
|
BYTE_OPERATION | SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl);
|
|
writeb(0xFF, &DpRamP->DpResetTpu);
|
|
udelay(3);
|
|
break;
|
|
case RIO_PCI:
|
|
rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n");
|
|
writeb(RIO_PCI_BOOT_FROM_RAM, &DpRamP->DpControl);
|
|
writeb(0xFF, &DpRamP->DpResetInt);
|
|
writeb(0xFF, &DpRamP->DpResetTpu);
|
|
udelay(100);
|
|
break;
|
|
default:
|
|
rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n");
|
|
break;
|
|
}
|
|
return;
|
|
}
|