![Bartlomiej Zolnierkiewicz](/assets/img/avatar_default.png)
Disable Virtual DMA support for now (it causes system hangs). Thanks to TAKADA Yoshihito for the help with debugging the problem. Reported-by: TAKADA Yoshihito <takada@mbf.nifty.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
201 lines
5.5 KiB
C
201 lines
5.5 KiB
C
/*
|
|
* IDE tuning and bus mastering support for the CS5510/CS5520
|
|
* chipsets
|
|
*
|
|
* The CS5510/CS5520 are slightly unusual devices. Unlike the
|
|
* typical IDE controllers they do bus mastering with the drive in
|
|
* PIO mode and smarter silicon.
|
|
*
|
|
* The practical upshot of this is that we must always tune the
|
|
* drive for the right PIO mode. We must also ignore all the blacklists
|
|
* and the drive bus mastering DMA information.
|
|
*
|
|
* *** This driver is strictly experimental ***
|
|
*
|
|
* (c) Copyright Red Hat Inc 2002
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* For the avoidance of doubt the "preferred form" of this code is one which
|
|
* is in an open non patent encumbered format. Where cryptographic key signing
|
|
* forms part of the process of creating an executable the information
|
|
* including keys needed to generate an equivalently functional executable
|
|
* are deemed to be part of the source code.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
struct pio_clocks
|
|
{
|
|
int address;
|
|
int assert;
|
|
int recovery;
|
|
};
|
|
|
|
static struct pio_clocks cs5520_pio_clocks[]={
|
|
{3, 6, 11},
|
|
{2, 5, 6},
|
|
{1, 4, 3},
|
|
{1, 3, 2},
|
|
{1, 2, 1}
|
|
};
|
|
|
|
static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *pdev = to_pci_dev(hwif->dev);
|
|
int controller = drive->dn > 1 ? 1 : 0;
|
|
|
|
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
|
|
|
|
/* 8bit CAT/CRT - 8bit command timing for channel */
|
|
pci_write_config_byte(pdev, 0x62 + controller,
|
|
(cs5520_pio_clocks[pio].recovery << 4) |
|
|
(cs5520_pio_clocks[pio].assert));
|
|
|
|
/* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
|
|
|
|
/* FIXME: should these use address ? */
|
|
/* Data read timing */
|
|
pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
|
|
(cs5520_pio_clocks[pio].recovery << 4) |
|
|
(cs5520_pio_clocks[pio].assert));
|
|
/* Write command timing */
|
|
pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
|
|
(cs5520_pio_clocks[pio].recovery << 4) |
|
|
(cs5520_pio_clocks[pio].assert));
|
|
}
|
|
|
|
static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
|
|
{
|
|
printk(KERN_ERR "cs55x0: bad ide timing.\n");
|
|
|
|
cs5520_set_pio_mode(drive, 0);
|
|
}
|
|
|
|
/*
|
|
* We wrap the DMA activate to set the vdma flag. This is needed
|
|
* so that the IDE DMA layer issues PIO not DMA commands over the
|
|
* DMA channel
|
|
*
|
|
* ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA
|
|
*/
|
|
|
|
static void cs5520_dma_host_set(ide_drive_t *drive, int on)
|
|
{
|
|
drive->vdma = on;
|
|
ide_dma_host_set(drive, on);
|
|
}
|
|
|
|
static const struct ide_port_ops cs5520_port_ops = {
|
|
.set_pio_mode = cs5520_set_pio_mode,
|
|
.set_dma_mode = cs5520_set_dma_mode,
|
|
};
|
|
|
|
static const struct ide_dma_ops cs5520_dma_ops = {
|
|
.dma_host_set = cs5520_dma_host_set,
|
|
.dma_setup = ide_dma_setup,
|
|
.dma_exec_cmd = ide_dma_exec_cmd,
|
|
.dma_start = ide_dma_start,
|
|
.dma_end = __ide_dma_end,
|
|
.dma_test_irq = ide_dma_test_irq,
|
|
.dma_lost_irq = ide_dma_lost_irq,
|
|
.dma_timeout = ide_dma_timeout,
|
|
};
|
|
|
|
/* FIXME: VDMA is disabled because it caused system hangs */
|
|
#define DECLARE_CS_DEV(name_str) \
|
|
{ \
|
|
.name = name_str, \
|
|
.port_ops = &cs5520_port_ops, \
|
|
.dma_ops = &cs5520_dma_ops, \
|
|
.host_flags = IDE_HFLAG_ISA_PORTS | \
|
|
IDE_HFLAG_CS5520 | \
|
|
IDE_HFLAG_NO_ATAPI_DMA | \
|
|
IDE_HFLAG_ABUSE_SET_DMA_MODE, \
|
|
.pio_mask = ATA_PIO4, \
|
|
}
|
|
|
|
static const struct ide_port_info cyrix_chipsets[] __devinitdata = {
|
|
/* 0 */ DECLARE_CS_DEV("Cyrix 5510"),
|
|
/* 1 */ DECLARE_CS_DEV("Cyrix 5520")
|
|
};
|
|
|
|
/*
|
|
* The 5510/5520 are a bit weird. They don't quite set up the way
|
|
* the PCI helper layer expects so we must do much of the set up
|
|
* work longhand.
|
|
*/
|
|
|
|
static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
const struct ide_port_info *d = &cyrix_chipsets[id->driver_data];
|
|
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
|
|
|
|
ide_setup_pci_noise(dev, d);
|
|
|
|
/* We must not grab the entire device, it has 'ISA' space in its
|
|
* BARS too and we will freak out other bits of the kernel
|
|
*/
|
|
if (pci_enable_device_io(dev)) {
|
|
printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
|
|
return -ENODEV;
|
|
}
|
|
pci_set_master(dev);
|
|
if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
|
|
printk(KERN_WARNING "cs5520: No suitable DMA available.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Now the chipset is configured we can let the core
|
|
* do all the device setup for us
|
|
*/
|
|
|
|
ide_pci_setup_ports(dev, d, 14, &idx[0]);
|
|
|
|
ide_device_add(idx, d);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pci_device_id cs5520_pci_tbl[] = {
|
|
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 },
|
|
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "Cyrix_IDE",
|
|
.id_table = cs5520_pci_tbl,
|
|
.probe = cs5520_init_one,
|
|
};
|
|
|
|
static int __init cs5520_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(cs5520_ide_init);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE");
|
|
MODULE_LICENSE("GPL");
|