dect/linux-2.6
Archived
14
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/net/usb/net1080.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

607 lines
16 KiB
C
Raw Blame History

/*
* Net1080 based USB host-to-host cables
* Copyright (C) 2000-2005 by David Brownell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
// #define DEBUG // error path messages, extra info
// #define VERBOSE // more; success messages
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/usbnet.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
/*
* Netchip 1080 driver ... http://www.netchip.com
* (Sept 2004: End-of-life announcement has been sent.)
* Used in (some) LapLink cables
*/
#define frame_errors data[1]
/*
* NetChip framing of ethernet packets, supporting additional error
* checks for links that may drop bulk packets from inside messages.
* Odd USB length == always short read for last usb packet.
* - nc_header
* - Ethernet header (14 bytes)
* - payload
* - (optional padding byte, if needed so length becomes odd)
* - nc_trailer
*
* This framing is to be avoided for non-NetChip devices.
*/
struct nc_header { // packed:
__le16 hdr_len; // sizeof nc_header (LE, all)
__le16 packet_len; // payload size (including ethhdr)
__le16 packet_id; // detects dropped packets
#define MIN_HEADER 6
// all else is optional, and must start with:
// __le16 vendorId; // from usb-if
// __le16 productId;
} __attribute__((__packed__));
#define PAD_BYTE ((unsigned char)0xAC)
struct nc_trailer {
__le16 packet_id;
} __attribute__((__packed__));
// packets may use FLAG_FRAMING_NC and optional pad
#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
+ sizeof (struct ethhdr) \
+ (mtu) \
+ 1 \
+ sizeof (struct nc_trailer))
#define MIN_FRAMED FRAMED_SIZE(0)
/* packets _could_ be up to 64KB... */
#define NC_MAX_PACKET 32767
/*
* Zero means no timeout; else, how long a 64 byte bulk packet may be queued
* before the hardware drops it. If that's done, the driver will need to
* frame network packets to guard against the dropped USB packets. The win32
* driver sets this for both sides of the link.
*/
#define NC_READ_TTL_MS ((u8)255) // ms
/*
* We ignore most registers and EEPROM contents.
*/
#define REG_USBCTL ((u8)0x04)
#define REG_TTL ((u8)0x10)
#define REG_STATUS ((u8)0x11)
/*
* Vendor specific requests to read/write data
*/
#define REQUEST_REGISTER ((u8)0x10)
#define REQUEST_EEPROM ((u8)0x11)
static int
nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
{
int status = usb_control_msg(dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, regnum,
retval_ptr, sizeof *retval_ptr,
USB_CTRL_GET_TIMEOUT);
if (status > 0)
status = 0;
if (!status)
le16_to_cpus(retval_ptr);
return status;
}
static inline int
nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr)
{
return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr);
}
// no retval ... can become async, usable in_interrupt()
static void
nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value)
{
usb_control_msg(dev->udev,
usb_sndctrlpipe(dev->udev, 0),
req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, regnum,
NULL, 0, // data is in setup packet
USB_CTRL_SET_TIMEOUT);
}
static inline void
nc_register_write(struct usbnet *dev, u8 regnum, u16 value)
{
nc_vendor_write(dev, REQUEST_REGISTER, regnum, value);
}
#if 0
static void nc_dump_registers(struct usbnet *dev)
{
u8 reg;
u16 *vp = kmalloc(sizeof (u16));
if (!vp) {
dbg("no memory?");
return;
}
dbg("%s registers:", dev->net->name);
for (reg = 0; reg < 0x20; reg++) {
int retval;
// reading some registers is trouble
if (reg >= 0x08 && reg <= 0xf)
continue;
if (reg >= 0x12 && reg <= 0x1e)
continue;
retval = nc_register_read(dev, reg, vp);
if (retval < 0)
dbg("%s reg [0x%x] ==> error %d",
dev->net->name, reg, retval);
else
dbg("%s reg [0x%x] = 0x%x",
dev->net->name, reg, *vp);
}
kfree(vp);
}
#endif
/*-------------------------------------------------------------------------*/
/*
* Control register
*/
#define USBCTL_WRITABLE_MASK 0x1f0f
// bits 15-13 reserved, r/o
#define USBCTL_ENABLE_LANG (1 << 12)
#define USBCTL_ENABLE_MFGR (1 << 11)
#define USBCTL_ENABLE_PROD (1 << 10)
#define USBCTL_ENABLE_SERIAL (1 << 9)
#define USBCTL_ENABLE_DEFAULTS (1 << 8)
// bits 7-4 reserved, r/o
#define USBCTL_FLUSH_OTHER (1 << 3)
#define USBCTL_FLUSH_THIS (1 << 2)
#define USBCTL_DISCONN_OTHER (1 << 1)
#define USBCTL_DISCONN_THIS (1 << 0)
static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
{
netif_dbg(dev, link, dev->net,
"net1080 %s-%s usbctl 0x%x:%s%s%s%s%s; this%s%s; other%s%s; r/o 0x%x\n",
dev->udev->bus->bus_name, dev->udev->devpath,
usbctl,
(usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
(usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
(usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
(usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
(usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
(usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
(usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
(usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
(usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
usbctl & ~USBCTL_WRITABLE_MASK);
}
/*-------------------------------------------------------------------------*/
/*
* Status register
*/
#define STATUS_PORT_A (1 << 15)
#define STATUS_CONN_OTHER (1 << 14)
#define STATUS_SUSPEND_OTHER (1 << 13)
#define STATUS_MAILBOX_OTHER (1 << 12)
#define STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03)
#define STATUS_CONN_THIS (1 << 6)
#define STATUS_SUSPEND_THIS (1 << 5)
#define STATUS_MAILBOX_THIS (1 << 4)
#define STATUS_PACKETS_THIS(n) (((n) >> 0) & 0x03)
#define STATUS_UNSPEC_MASK 0x0c8c
#define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK))
static inline void nc_dump_status(struct usbnet *dev, u16 status)
{
netif_dbg(dev, link, dev->net,
"net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n",
dev->udev->bus->bus_name, dev->udev->devpath,
status,
// XXX the packet counts don't seem right
// (1 at reset, not 0); maybe UNSPEC too
(status & STATUS_PORT_A) ? 'A' : 'B',
STATUS_PACKETS_THIS(status),
(status & STATUS_CONN_THIS) ? " CON" : "",
(status & STATUS_SUSPEND_THIS) ? " SUS" : "",
(status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
STATUS_PACKETS_OTHER(status),
(status & STATUS_CONN_OTHER) ? " CON" : "",
(status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
(status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
status & STATUS_UNSPEC_MASK);
}
/*-------------------------------------------------------------------------*/
/*
* TTL register
*/
#define TTL_THIS(ttl) (0x00ff & ttl)
#define TTL_OTHER(ttl) (0x00ff & (ttl >> 8))
#define MK_TTL(this,other) ((u16)(((other)<<8)|(0x00ff&(this))))
static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl)
{
netif_dbg(dev, link, dev->net, "net1080 %s-%s ttl 0x%x this = %d, other = %d\n",
dev->udev->bus->bus_name, dev->udev->devpath,
ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
}
/*-------------------------------------------------------------------------*/
static int net1080_reset(struct usbnet *dev)
{
u16 usbctl, status, ttl;
u16 *vp = kmalloc(sizeof (u16), GFP_KERNEL);
int retval;
if (!vp)
return -ENOMEM;
// nc_dump_registers(dev);
if ((retval = nc_register_read(dev, REG_STATUS, vp)) < 0) {
dbg("can't read %s-%s status: %d",
dev->udev->bus->bus_name, dev->udev->devpath, retval);
goto done;
}
status = *vp;
nc_dump_status(dev, status);
if ((retval = nc_register_read(dev, REG_USBCTL, vp)) < 0) {
dbg("can't read USBCTL, %d", retval);
goto done;
}
usbctl = *vp;
nc_dump_usbctl(dev, usbctl);
nc_register_write(dev, REG_USBCTL,
USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
if ((retval = nc_register_read(dev, REG_TTL, vp)) < 0) {
dbg("can't read TTL, %d", retval);
goto done;
}
ttl = *vp;
// nc_dump_ttl(dev, ttl);
nc_register_write(dev, REG_TTL,
MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );
dbg("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);
netif_info(dev, link, dev->net, "port %c, peer %sconnected\n",
(status & STATUS_PORT_A) ? 'A' : 'B',
(status & STATUS_CONN_OTHER) ? "" : "dis");
retval = 0;
done:
kfree(vp);
return retval;
}
static int net1080_check_connect(struct usbnet *dev)
{
int retval;
u16 status;
u16 *vp = kmalloc(sizeof (u16), GFP_KERNEL);
if (!vp)
return -ENOMEM;
retval = nc_register_read(dev, REG_STATUS, vp);
status = *vp;
kfree(vp);
if (retval != 0) {
dbg("%s net1080_check_conn read - %d", dev->net->name, retval);
return retval;
}
if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
return -ENOLINK;
return 0;
}
static void nc_flush_complete(struct urb *urb)
{
kfree(urb->context);
usb_free_urb(urb);
}
static void nc_ensure_sync(struct usbnet *dev)
{
dev->frame_errors++;
if (dev->frame_errors > 5) {
struct urb *urb;
struct usb_ctrlrequest *req;
int status;
/* Send a flush */
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return;
req = kmalloc(sizeof *req, GFP_ATOMIC);
if (!req) {
usb_free_urb(urb);
return;
}
req->bRequestType = USB_DIR_OUT
| USB_TYPE_VENDOR
| USB_RECIP_DEVICE;
req->bRequest = REQUEST_REGISTER;
req->wValue = cpu_to_le16(USBCTL_FLUSH_THIS
| USBCTL_FLUSH_OTHER);
req->wIndex = cpu_to_le16(REG_USBCTL);
req->wLength = cpu_to_le16(0);
/* queue an async control request, we don't need
* to do anything when it finishes except clean up.
*/
usb_fill_control_urb(urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0),
(unsigned char *) req,
NULL, 0,
nc_flush_complete, req);
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
kfree(req);
usb_free_urb(urb);
return;
}
netif_dbg(dev, rx_err, dev->net,
"flush net1080; too many framing errors\n");
dev->frame_errors = 0;
}
}
static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
struct nc_header *header;
struct nc_trailer *trailer;
u16 hdr_len, packet_len;
if (!(skb->len & 0x01)) {
#ifdef DEBUG
struct net_device *net = dev->net;
dbg("rx framesize %d range %d..%d mtu %d", skb->len,
net->hard_header_len, dev->hard_mtu, net->mtu);
#endif
dev->net->stats.rx_frame_errors++;
nc_ensure_sync(dev);
return 0;
}
header = (struct nc_header *) skb->data;
hdr_len = le16_to_cpup(&header->hdr_len);
packet_len = le16_to_cpup(&header->packet_len);
if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
dev->net->stats.rx_frame_errors++;
dbg("packet too big, %d", packet_len);
nc_ensure_sync(dev);
return 0;
} else if (hdr_len < MIN_HEADER) {
dev->net->stats.rx_frame_errors++;
dbg("header too short, %d", hdr_len);
nc_ensure_sync(dev);
return 0;
} else if (hdr_len > MIN_HEADER) {
// out of band data for us?
dbg("header OOB, %d bytes", hdr_len - MIN_HEADER);
nc_ensure_sync(dev);
// switch (vendor/product ids) { ... }
}
skb_pull(skb, hdr_len);
trailer = (struct nc_trailer *)
(skb->data + skb->len - sizeof *trailer);
skb_trim(skb, skb->len - sizeof *trailer);
if ((packet_len & 0x01) == 0) {
if (skb->data [packet_len] != PAD_BYTE) {
dev->net->stats.rx_frame_errors++;
dbg("bad pad");
return 0;
}
skb_trim(skb, skb->len - 1);
}
if (skb->len != packet_len) {
dev->net->stats.rx_frame_errors++;
dbg("bad packet len %d (expected %d)",
skb->len, packet_len);
nc_ensure_sync(dev);
return 0;
}
if (header->packet_id != get_unaligned(&trailer->packet_id)) {
dev->net->stats.rx_fifo_errors++;
dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
le16_to_cpu(header->packet_id),
le16_to_cpu(trailer->packet_id));
return 0;
}
#if 0
netdev_dbg(dev->net, "frame <rx h %d p %d id %d\n", header->hdr_len,
header->packet_len, header->packet_id);
#endif
dev->frame_errors = 0;
return 1;
}
static struct sk_buff *
net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
struct sk_buff *skb2;
struct nc_header *header = NULL;
struct nc_trailer *trailer = NULL;
int padlen = sizeof (struct nc_trailer);
int len = skb->len;
if (!((len + padlen + sizeof (struct nc_header)) & 0x01))
padlen++;
if (!skb_cloned(skb)) {
int headroom = skb_headroom(skb);
int tailroom = skb_tailroom(skb);
if (padlen <= tailroom &&
sizeof(struct nc_header) <= headroom)
/* There's enough head and tail room */
goto encapsulate;
if ((sizeof (struct nc_header) + padlen) <
(headroom + tailroom)) {
/* There's enough total room, so just readjust */
skb->data = memmove(skb->head
+ sizeof (struct nc_header),
skb->data, skb->len);
skb_set_tail_pointer(skb, len);
goto encapsulate;
}
}
/* Create a new skb to use with the correct size */
skb2 = skb_copy_expand(skb,
sizeof (struct nc_header),
padlen,
flags);
dev_kfree_skb_any(skb);
if (!skb2)
return skb2;
skb = skb2;
encapsulate:
/* header first */
header = (struct nc_header *) skb_push(skb, sizeof *header);
header->hdr_len = cpu_to_le16(sizeof (*header));
header->packet_len = cpu_to_le16(len);
header->packet_id = cpu_to_le16((u16)dev->xid++);
/* maybe pad; then trailer */
if (!((skb->len + sizeof *trailer) & 0x01))
*skb_put(skb, 1) = PAD_BYTE;
trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);
put_unaligned(header->packet_id, &trailer->packet_id);
#if 0
netdev_dbg(dev->net, "frame >tx h %d p %d id %d\n",
header->hdr_len, header->packet_len,
header->packet_id);
#endif
return skb;
}
static int net1080_bind(struct usbnet *dev, struct usb_interface *intf)
{
unsigned extra = sizeof (struct nc_header)
+ 1
+ sizeof (struct nc_trailer);
dev->net->hard_header_len += extra;
dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
dev->hard_mtu = NC_MAX_PACKET;
return usbnet_get_endpoints (dev, intf);
}
static const struct driver_info net1080_info = {
.description = "NetChip TurboCONNECT",
.flags = FLAG_FRAMING_NC,
.bind = net1080_bind,
.reset = net1080_reset,
.check_connect = net1080_check_connect,
.rx_fixup = net1080_rx_fixup,
.tx_fixup = net1080_tx_fixup,
};
static const struct usb_device_id products [] = {
{
USB_DEVICE(0x0525, 0x1080), // NetChip ref design
.driver_info = (unsigned long) &net1080_info,
}, {
USB_DEVICE(0x06D0, 0x0622), // Laplink Gold
.driver_info = (unsigned long) &net1080_info,
},
{ }, // END
};
MODULE_DEVICE_TABLE(usb, products);
static struct usb_driver net1080_driver = {
.name = "net1080",
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
};
static int __init net1080_init(void)
{
return usb_register(&net1080_driver);
}
module_init(net1080_init);
static void __exit net1080_exit(void)
{
usb_deregister(&net1080_driver);
}
module_exit(net1080_exit);
MODULE_AUTHOR("David Brownell");
MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links");
MODULE_LICENSE("GPL");
View git blame Copy permalink