Archived
14
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/input/keyboard/omap-keypad.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

497 lines
12 KiB
C

/*
* linux/drivers/input/keyboard/omap-keypad.c
*
* OMAP Keypad Driver
*
* Copyright (C) 2003 Nokia Corporation
* Written by Timo Teräs <ext-timo.teras@nokia.com>
*
* Added support for H2 & H3 Keypad
* Copyright (C) 2004 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <mach/gpio.h>
#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <plat/mux.h>
#undef NEW_BOARD_LEARNING_MODE
static void omap_kp_tasklet(unsigned long);
static void omap_kp_timer(unsigned long);
static unsigned char keypad_state[8];
static DEFINE_MUTEX(kp_enable_mutex);
static int kp_enable = 1;
static int kp_cur_group = -1;
struct omap_kp {
struct input_dev *input;
struct timer_list timer;
int irq;
unsigned int rows;
unsigned int cols;
unsigned long delay;
unsigned int debounce;
};
static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
static int *keymap;
static unsigned int *row_gpios;
static unsigned int *col_gpios;
#ifdef CONFIG_ARCH_OMAP2
static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value)
{
int col;
for (col = 0; col < omap_kp->cols; col++)
gpio_set_value(col_gpios[col], value & (1 << col));
}
static u8 get_row_gpio_val(struct omap_kp *omap_kp)
{
int row;
u8 value = 0;
for (row = 0; row < omap_kp->rows; row++) {
if (gpio_get_value(row_gpios[row]))
value |= (1 << row);
}
return value;
}
#else
#define set_col_gpio_val(x, y) do {} while (0)
#define get_row_gpio_val(x) 0
#endif
static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
{
struct omap_kp *omap_kp = dev_id;
/* disable keyboard interrupt and schedule for handling */
if (cpu_is_omap24xx()) {
int i;
for (i = 0; i < omap_kp->rows; i++) {
int gpio_irq = gpio_to_irq(row_gpios[i]);
/*
* The interrupt which we're currently handling should
* be disabled _nosync() to avoid deadlocks waiting
* for this handler to complete. All others should
* be disabled the regular way for SMP safety.
*/
if (gpio_irq == irq)
disable_irq_nosync(gpio_irq);
else
disable_irq(gpio_irq);
}
} else
/* disable keyboard interrupt and schedule for handling */
omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
tasklet_schedule(&kp_tasklet);
return IRQ_HANDLED;
}
static void omap_kp_timer(unsigned long data)
{
tasklet_schedule(&kp_tasklet);
}
static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
{
int col = 0;
/* read the keypad status */
if (cpu_is_omap24xx()) {
/* read the keypad status */
for (col = 0; col < omap_kp->cols; col++) {
set_col_gpio_val(omap_kp, ~(1 << col));
state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff;
}
set_col_gpio_val(omap_kp, 0);
} else {
/* disable keyboard interrupt and schedule for handling */
omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
/* read the keypad status */
omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
for (col = 0; col < omap_kp->cols; col++) {
omap_writew(~(1 << col) & 0xff,
OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
udelay(omap_kp->delay);
state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
OMAP_MPUIO_KBR_LATCH) & 0xff;
}
omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
udelay(2);
}
}
static inline int omap_kp_find_key(int col, int row)
{
int i, key;
key = KEY(col, row, 0);
for (i = 0; keymap[i] != 0; i++)
if ((keymap[i] & 0xff000000) == key)
return keymap[i] & 0x00ffffff;
return -1;
}
static void omap_kp_tasklet(unsigned long data)
{
struct omap_kp *omap_kp_data = (struct omap_kp *) data;
unsigned char new_state[8], changed, key_down = 0;
int col, row;
int spurious = 0;
/* check for any changes */
omap_kp_scan_keypad(omap_kp_data, new_state);
/* check for changes and print those */
for (col = 0; col < omap_kp_data->cols; col++) {
changed = new_state[col] ^ keypad_state[col];
key_down |= new_state[col];
if (changed == 0)
continue;
for (row = 0; row < omap_kp_data->rows; row++) {
int key;
if (!(changed & (1 << row)))
continue;
#ifdef NEW_BOARD_LEARNING_MODE
printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col,
row, (new_state[col] & (1 << row)) ?
"pressed" : "released");
#else
key = omap_kp_find_key(col, row);
if (key < 0) {
printk(KERN_WARNING
"omap-keypad: Spurious key event %d-%d\n",
col, row);
/* We scan again after a couple of seconds */
spurious = 1;
continue;
}
if (!(kp_cur_group == (key & GROUP_MASK) ||
kp_cur_group == -1))
continue;
kp_cur_group = key & GROUP_MASK;
input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
new_state[col] & (1 << row));
#endif
}
}
memcpy(keypad_state, new_state, sizeof(keypad_state));
if (key_down) {
int delay = HZ / 20;
/* some key is pressed - keep irq disabled and use timer
* to poll the keypad */
if (spurious)
delay = 2 * HZ;
mod_timer(&omap_kp_data->timer, jiffies + delay);
} else {
/* enable interrupts */
if (cpu_is_omap24xx()) {
int i;
for (i = 0; i < omap_kp_data->rows; i++)
enable_irq(gpio_to_irq(row_gpios[i]));
} else {
omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
kp_cur_group = -1;
}
}
}
static ssize_t omap_kp_enable_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%u\n", kp_enable);
}
static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int state;
if (sscanf(buf, "%u", &state) != 1)
return -EINVAL;
if ((state != 1) && (state != 0))
return -EINVAL;
mutex_lock(&kp_enable_mutex);
if (state != kp_enable) {
if (state)
enable_irq(INT_KEYBOARD);
else
disable_irq(INT_KEYBOARD);
kp_enable = state;
}
mutex_unlock(&kp_enable_mutex);
return strnlen(buf, count);
}
static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, omap_kp_enable_show, omap_kp_enable_store);
#ifdef CONFIG_PM
static int omap_kp_suspend(struct platform_device *dev, pm_message_t state)
{
/* Nothing yet */
return 0;
}
static int omap_kp_resume(struct platform_device *dev)
{
/* Nothing yet */
return 0;
}
#else
#define omap_kp_suspend NULL
#define omap_kp_resume NULL
#endif
static int __devinit omap_kp_probe(struct platform_device *pdev)
{
struct omap_kp *omap_kp;
struct input_dev *input_dev;
struct omap_kp_platform_data *pdata = pdev->dev.platform_data;
int i, col_idx, row_idx, irq_idx, ret;
if (!pdata->rows || !pdata->cols || !pdata->keymap) {
printk(KERN_ERR "No rows, cols or keymap from pdata\n");
return -EINVAL;
}
omap_kp = kzalloc(sizeof(struct omap_kp), GFP_KERNEL);
input_dev = input_allocate_device();
if (!omap_kp || !input_dev) {
kfree(omap_kp);
input_free_device(input_dev);
return -ENOMEM;
}
platform_set_drvdata(pdev, omap_kp);
omap_kp->input = input_dev;
/* Disable the interrupt for the MPUIO keyboard */
if (!cpu_is_omap24xx())
omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
keymap = pdata->keymap;
if (pdata->rep)
__set_bit(EV_REP, input_dev->evbit);
if (pdata->delay)
omap_kp->delay = pdata->delay;
if (pdata->row_gpios && pdata->col_gpios) {
row_gpios = pdata->row_gpios;
col_gpios = pdata->col_gpios;
}
omap_kp->rows = pdata->rows;
omap_kp->cols = pdata->cols;
if (cpu_is_omap24xx()) {
/* Cols: outputs */
for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) {
printk(KERN_ERR "Failed to request"
"GPIO%d for keypad\n",
col_gpios[col_idx]);
goto err1;
}
gpio_direction_output(col_gpios[col_idx], 0);
}
/* Rows: inputs */
for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) {
printk(KERN_ERR "Failed to request"
"GPIO%d for keypad\n",
row_gpios[row_idx]);
goto err2;
}
gpio_direction_input(row_gpios[row_idx]);
}
} else {
col_idx = 0;
row_idx = 0;
}
setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);
/* get the irq and init timer*/
tasklet_enable(&kp_tasklet);
kp_tasklet.data = (unsigned long) omap_kp;
ret = device_create_file(&pdev->dev, &dev_attr_enable);
if (ret < 0)
goto err2;
/* setup input device */
__set_bit(EV_KEY, input_dev->evbit);
for (i = 0; keymap[i] != 0; i++)
__set_bit(keymap[i] & KEY_MAX, input_dev->keybit);
input_dev->name = "omap-keypad";
input_dev->phys = "omap-keypad/input0";
input_dev->dev.parent = &pdev->dev;
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0x0001;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
ret = input_register_device(omap_kp->input);
if (ret < 0) {
printk(KERN_ERR "Unable to register omap-keypad input device\n");
goto err3;
}
if (pdata->dbounce)
omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
/* scan current status and enable interrupt */
omap_kp_scan_keypad(omap_kp, keypad_state);
if (!cpu_is_omap24xx()) {
omap_kp->irq = platform_get_irq(pdev, 0);
if (omap_kp->irq >= 0) {
if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
"omap-keypad", omap_kp) < 0)
goto err4;
}
omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
} else {
for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
omap_kp_interrupt,
IRQF_TRIGGER_FALLING,
"omap-keypad", omap_kp) < 0)
goto err5;
}
}
return 0;
err5:
for (i = irq_idx - 1; i >=0; i--)
free_irq(row_gpios[i], 0);
err4:
input_unregister_device(omap_kp->input);
input_dev = NULL;
err3:
device_remove_file(&pdev->dev, &dev_attr_enable);
err2:
for (i = row_idx - 1; i >=0; i--)
gpio_free(row_gpios[i]);
err1:
for (i = col_idx - 1; i >=0; i--)
gpio_free(col_gpios[i]);
kfree(omap_kp);
input_free_device(input_dev);
return -EINVAL;
}
static int __devexit omap_kp_remove(struct platform_device *pdev)
{
struct omap_kp *omap_kp = platform_get_drvdata(pdev);
/* disable keypad interrupt handling */
tasklet_disable(&kp_tasklet);
if (cpu_is_omap24xx()) {
int i;
for (i = 0; i < omap_kp->cols; i++)
gpio_free(col_gpios[i]);
for (i = 0; i < omap_kp->rows; i++) {
gpio_free(row_gpios[i]);
free_irq(gpio_to_irq(row_gpios[i]), 0);
}
} else {
omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
free_irq(omap_kp->irq, 0);
}
del_timer_sync(&omap_kp->timer);
tasklet_kill(&kp_tasklet);
/* unregister everything */
input_unregister_device(omap_kp->input);
kfree(omap_kp);
return 0;
}
static struct platform_driver omap_kp_driver = {
.probe = omap_kp_probe,
.remove = __devexit_p(omap_kp_remove),
.suspend = omap_kp_suspend,
.resume = omap_kp_resume,
.driver = {
.name = "omap-keypad",
.owner = THIS_MODULE,
},
};
static int __init omap_kp_init(void)
{
printk(KERN_INFO "OMAP Keypad Driver\n");
return platform_driver_register(&omap_kp_driver);
}
static void __exit omap_kp_exit(void)
{
platform_driver_unregister(&omap_kp_driver);
}
module_init(omap_kp_init);
module_exit(omap_kp_exit);
MODULE_AUTHOR("Timo Teräs");
MODULE_DESCRIPTION("OMAP Keypad Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:omap-keypad");