![Ben Dooks](/assets/img/avatar_default.png)
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: Ben Dooks <ben-linux@fluff.org>
421 lines
9.5 KiB
C
421 lines
9.5 KiB
C
/* linux/arch/arm/mach-s3c2440/mach-osiris.c
|
|
*
|
|
* Copyright (c) 2005,2008 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <mach/osiris-map.h>
|
|
#include <mach/osiris-cpld.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <plat/regs-serial.h>
|
|
#include <mach/regs-gpio.h>
|
|
#include <mach/regs-mem.h>
|
|
#include <mach/regs-lcd.h>
|
|
#include <plat/nand.h>
|
|
#include <plat/iic.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/nand_ecc.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <plat/clock.h>
|
|
#include <plat/devs.h>
|
|
#include <plat/cpu.h>
|
|
|
|
/* onboard perihperal map */
|
|
|
|
static struct map_desc osiris_iodesc[] __initdata = {
|
|
/* ISA IO areas (may be over-written later) */
|
|
|
|
{
|
|
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
|
|
.pfn = __phys_to_pfn(S3C2410_CS5),
|
|
.length = SZ_16M,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)S3C24XX_VA_ISA_WORD,
|
|
.pfn = __phys_to_pfn(S3C2410_CS5),
|
|
.length = SZ_16M,
|
|
.type = MT_DEVICE,
|
|
},
|
|
|
|
/* CPLD control registers */
|
|
|
|
{
|
|
.virtual = (u32)OSIRIS_VA_CTRL0,
|
|
.pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)OSIRIS_VA_CTRL1,
|
|
.pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)OSIRIS_VA_CTRL2,
|
|
.pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (u32)OSIRIS_VA_IDREG,
|
|
.pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
|
|
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
|
|
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
|
|
|
|
static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
|
|
[0] = {
|
|
.name = "uclk",
|
|
.divisor = 1,
|
|
.min_baud = 0,
|
|
.max_baud = 0,
|
|
},
|
|
[1] = {
|
|
.name = "pclk",
|
|
.divisor = 1,
|
|
.min_baud = 0,
|
|
.max_baud = 0,
|
|
}
|
|
};
|
|
|
|
static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
|
|
[0] = {
|
|
.hwport = 0,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = osiris_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
|
|
},
|
|
[1] = {
|
|
.hwport = 1,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = osiris_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
|
|
},
|
|
[2] = {
|
|
.hwport = 2,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = osiris_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
|
|
}
|
|
};
|
|
|
|
/* NAND Flash on Osiris board */
|
|
|
|
static int external_map[] = { 2 };
|
|
static int chip0_map[] = { 0 };
|
|
static int chip1_map[] = { 1 };
|
|
|
|
static struct mtd_partition osiris_default_nand_part[] = {
|
|
[0] = {
|
|
.name = "Boot Agent",
|
|
.size = SZ_16K,
|
|
.offset = 0,
|
|
},
|
|
[1] = {
|
|
.name = "/boot",
|
|
.size = SZ_4M - SZ_16K,
|
|
.offset = SZ_16K,
|
|
},
|
|
[2] = {
|
|
.name = "user1",
|
|
.offset = SZ_4M,
|
|
.size = SZ_32M - SZ_4M,
|
|
},
|
|
[3] = {
|
|
.name = "user2",
|
|
.offset = SZ_32M,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
static struct mtd_partition osiris_default_nand_part_large[] = {
|
|
[0] = {
|
|
.name = "Boot Agent",
|
|
.size = SZ_128K,
|
|
.offset = 0,
|
|
},
|
|
[1] = {
|
|
.name = "/boot",
|
|
.size = SZ_4M - SZ_128K,
|
|
.offset = SZ_128K,
|
|
},
|
|
[2] = {
|
|
.name = "user1",
|
|
.offset = SZ_4M,
|
|
.size = SZ_32M - SZ_4M,
|
|
},
|
|
[3] = {
|
|
.name = "user2",
|
|
.offset = SZ_32M,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
/* the Osiris has 3 selectable slots for nand-flash, the two
|
|
* on-board chip areas, as well as the external slot.
|
|
*
|
|
* Note, there is no current hot-plug support for the External
|
|
* socket.
|
|
*/
|
|
|
|
static struct s3c2410_nand_set osiris_nand_sets[] = {
|
|
[1] = {
|
|
.name = "External",
|
|
.nr_chips = 1,
|
|
.nr_map = external_map,
|
|
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
|
|
.partitions = osiris_default_nand_part,
|
|
},
|
|
[0] = {
|
|
.name = "chip0",
|
|
.nr_chips = 1,
|
|
.nr_map = chip0_map,
|
|
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
|
|
.partitions = osiris_default_nand_part,
|
|
},
|
|
[2] = {
|
|
.name = "chip1",
|
|
.nr_chips = 1,
|
|
.nr_map = chip1_map,
|
|
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
|
|
.partitions = osiris_default_nand_part,
|
|
},
|
|
};
|
|
|
|
static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
slot = set->nr_map[slot] & 3;
|
|
|
|
pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
|
|
slot, set, set->nr_map);
|
|
|
|
tmp = __raw_readb(OSIRIS_VA_CTRL0);
|
|
tmp &= ~OSIRIS_CTRL0_NANDSEL;
|
|
tmp |= slot;
|
|
|
|
pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
|
|
|
|
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
|
|
}
|
|
|
|
static struct s3c2410_platform_nand osiris_nand_info = {
|
|
.tacls = 25,
|
|
.twrph0 = 60,
|
|
.twrph1 = 60,
|
|
.nr_sets = ARRAY_SIZE(osiris_nand_sets),
|
|
.sets = osiris_nand_sets,
|
|
.select_chip = osiris_nand_select,
|
|
};
|
|
|
|
/* PCMCIA control and configuration */
|
|
|
|
static struct resource osiris_pcmcia_resource[] = {
|
|
[0] = {
|
|
.start = 0x0f000000,
|
|
.end = 0x0f100000,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 0x0c000000,
|
|
.end = 0x0c100000,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device osiris_pcmcia = {
|
|
.name = "osiris-pcmcia",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
|
|
.resource = osiris_pcmcia_resource,
|
|
};
|
|
|
|
/* Osiris power management device */
|
|
|
|
#ifdef CONFIG_PM
|
|
static unsigned char pm_osiris_ctrl0;
|
|
|
|
static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
|
|
tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
|
|
|
|
/* ensure correct NAND slot is selected on resume */
|
|
if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
|
|
tmp |= 2;
|
|
|
|
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
|
|
|
|
/* ensure that an nRESET is not generated on resume. */
|
|
s3c2410_gpio_setpin(S3C2410_GPA21, 1);
|
|
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int osiris_pm_resume(struct sys_device *sd)
|
|
{
|
|
if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
|
|
__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
|
|
|
|
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
|
|
|
|
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define osiris_pm_suspend NULL
|
|
#define osiris_pm_resume NULL
|
|
#endif
|
|
|
|
static struct sysdev_class osiris_pm_sysclass = {
|
|
.name = "mach-osiris",
|
|
.suspend = osiris_pm_suspend,
|
|
.resume = osiris_pm_resume,
|
|
};
|
|
|
|
static struct sys_device osiris_pm_sysdev = {
|
|
.cls = &osiris_pm_sysclass,
|
|
};
|
|
|
|
/* I2C devices fitted. */
|
|
|
|
static struct i2c_board_info osiris_i2c_devs[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("tps65011", 0x48),
|
|
.irq = IRQ_EINT20,
|
|
},
|
|
};
|
|
|
|
/* Standard Osiris devices */
|
|
|
|
static struct platform_device *osiris_devices[] __initdata = {
|
|
&s3c_device_i2c0,
|
|
&s3c_device_wdt,
|
|
&s3c_device_nand,
|
|
&osiris_pcmcia,
|
|
};
|
|
|
|
static struct clk *osiris_clocks[] __initdata = {
|
|
&s3c24xx_dclk0,
|
|
&s3c24xx_dclk1,
|
|
&s3c24xx_clkout0,
|
|
&s3c24xx_clkout1,
|
|
&s3c24xx_uclk,
|
|
};
|
|
|
|
static void __init osiris_map_io(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* initialise the clocks */
|
|
|
|
s3c24xx_dclk0.parent = &clk_upll;
|
|
s3c24xx_dclk0.rate = 12*1000*1000;
|
|
|
|
s3c24xx_dclk1.parent = &clk_upll;
|
|
s3c24xx_dclk1.rate = 24*1000*1000;
|
|
|
|
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
|
|
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
|
|
|
|
s3c24xx_uclk.parent = &s3c24xx_clkout1;
|
|
|
|
s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
|
|
|
|
s3c_device_nand.dev.platform_data = &osiris_nand_info;
|
|
|
|
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
|
|
s3c24xx_init_clocks(0);
|
|
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
|
|
|
|
/* check for the newer revision boards with large page nand */
|
|
|
|
if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
|
|
printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
|
|
__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
|
|
osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
|
|
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
|
|
} else {
|
|
/* write-protect line to the NAND */
|
|
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
|
|
}
|
|
|
|
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
|
|
|
|
local_irq_save(flags);
|
|
__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void __init osiris_init(void)
|
|
{
|
|
sysdev_class_register(&osiris_pm_sysclass);
|
|
sysdev_register(&osiris_pm_sysdev);
|
|
|
|
s3c_i2c0_set_platdata(NULL);
|
|
|
|
i2c_register_board_info(0, osiris_i2c_devs,
|
|
ARRAY_SIZE(osiris_i2c_devs));
|
|
|
|
platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
|
|
};
|
|
|
|
MACHINE_START(OSIRIS, "Simtec-OSIRIS")
|
|
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
|
|
.phys_io = S3C2410_PA_UART,
|
|
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
|
|
.boot_params = S3C2410_SDRAM_PA + 0x100,
|
|
.map_io = osiris_map_io,
|
|
.init_machine = osiris_init,
|
|
.init_irq = s3c24xx_init_irq,
|
|
.init_machine = osiris_init,
|
|
.timer = &s3c24xx_timer,
|
|
MACHINE_END
|