![Yani Ioannou](/assets/img/avatar_default.png)
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
642 lines
20 KiB
C
642 lines
20 KiB
C
/*
|
|
fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips
|
|
Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/*
|
|
fujitsu siemens poseidon chip,
|
|
module based on the old fscpos module by Hermann Jung <hej@odn.de> and
|
|
the fscher module by Reinhard Nissl <rnissl@gmx.de>
|
|
|
|
original module based on lm80.c
|
|
Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
|
|
and Philip Edelbrock <phil@netroedge.com>
|
|
|
|
Thanks to Jean Delvare for reviewing my code and suggesting a lot of
|
|
improvements.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-sensor.h>
|
|
#include <linux/init.h>
|
|
|
|
/*
|
|
* Addresses to scan
|
|
*/
|
|
static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
|
|
static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
|
|
|
|
/*
|
|
* Insmod parameters
|
|
*/
|
|
SENSORS_INSMOD_1(fscpos);
|
|
|
|
/*
|
|
* The FSCPOS registers
|
|
*/
|
|
|
|
/* chip identification */
|
|
#define FSCPOS_REG_IDENT_0 0x00
|
|
#define FSCPOS_REG_IDENT_1 0x01
|
|
#define FSCPOS_REG_IDENT_2 0x02
|
|
#define FSCPOS_REG_REVISION 0x03
|
|
|
|
/* global control and status */
|
|
#define FSCPOS_REG_EVENT_STATE 0x04
|
|
#define FSCPOS_REG_CONTROL 0x05
|
|
|
|
/* watchdog */
|
|
#define FSCPOS_REG_WDOG_PRESET 0x28
|
|
#define FSCPOS_REG_WDOG_STATE 0x23
|
|
#define FSCPOS_REG_WDOG_CONTROL 0x21
|
|
|
|
/* voltages */
|
|
#define FSCPOS_REG_VOLT_12 0x45
|
|
#define FSCPOS_REG_VOLT_5 0x42
|
|
#define FSCPOS_REG_VOLT_BATT 0x48
|
|
|
|
/* fans - the chip does not support minimum speed for fan2 */
|
|
static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 };
|
|
static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab };
|
|
static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 };
|
|
static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf };
|
|
|
|
/* temperatures */
|
|
static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 };
|
|
static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 };
|
|
|
|
/*
|
|
* Functions declaration
|
|
*/
|
|
static int fscpos_attach_adapter(struct i2c_adapter *adapter);
|
|
static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind);
|
|
static int fscpos_detach_client(struct i2c_client *client);
|
|
|
|
static int fscpos_read_value(struct i2c_client *client, u8 register);
|
|
static int fscpos_write_value(struct i2c_client *client, u8 register, u8 value);
|
|
static struct fscpos_data *fscpos_update_device(struct device *dev);
|
|
static void fscpos_init_client(struct i2c_client *client);
|
|
|
|
static void reset_fan_alarm(struct i2c_client *client, int nr);
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
static struct i2c_driver fscpos_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "fscpos",
|
|
.id = I2C_DRIVERID_FSCPOS,
|
|
.flags = I2C_DF_NOTIFY,
|
|
.attach_adapter = fscpos_attach_adapter,
|
|
.detach_client = fscpos_detach_client,
|
|
};
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
struct fscpos_data {
|
|
struct i2c_client client;
|
|
struct semaphore update_lock;
|
|
char valid; /* 0 until following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
/* register values */
|
|
u8 revision; /* revision of chip */
|
|
u8 global_event; /* global event status */
|
|
u8 global_control; /* global control register */
|
|
u8 wdog_control; /* watchdog control */
|
|
u8 wdog_state; /* watchdog status */
|
|
u8 wdog_preset; /* watchdog preset */
|
|
u8 volt[3]; /* 12, 5, battery current */
|
|
u8 temp_act[3]; /* temperature */
|
|
u8 temp_status[3]; /* status of sensor */
|
|
u8 fan_act[3]; /* fans revolutions per second */
|
|
u8 fan_status[3]; /* fan status */
|
|
u8 pwm[2]; /* fan min value for rps */
|
|
u8 fan_ripple[3]; /* divider for rps */
|
|
};
|
|
|
|
/* Temperature */
|
|
#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
|
|
|
|
static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr)
|
|
{
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1]));
|
|
}
|
|
|
|
static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr)
|
|
{
|
|
/* bits 2..7 reserved => mask with 0x03 */
|
|
return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03);
|
|
}
|
|
|
|
static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr)
|
|
{
|
|
return sprintf(buf, "1\n");
|
|
}
|
|
|
|
static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data
|
|
*data, const char *buf, size_t count, int nr, int reg)
|
|
{
|
|
unsigned long v = simple_strtoul(buf, NULL, 10);
|
|
if (v != 1) {
|
|
dev_err(&client->dev, "temp_reset value %ld not supported. "
|
|
"Use 1 to reset the alarm!\n", v);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_info(&client->dev, "You used the temp_reset feature which has not "
|
|
"been proplerly tested. Please report your "
|
|
"experience to the module author.\n");
|
|
|
|
/* Supported value: 2 (clears the status) */
|
|
fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr], 2);
|
|
return count;
|
|
}
|
|
|
|
/* Fans */
|
|
#define RPM_FROM_REG(val) ((val) * 60)
|
|
|
|
static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr)
|
|
{
|
|
/* bits 0..1, 3..7 reserved => mask with 0x04 */
|
|
return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04);
|
|
}
|
|
|
|
static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr)
|
|
{
|
|
return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1]));
|
|
}
|
|
|
|
static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr)
|
|
{
|
|
/* bits 2..7 reserved => mask with 0x03 */
|
|
return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03);
|
|
}
|
|
|
|
static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data
|
|
*data, const char *buf, size_t count, int nr, int reg)
|
|
{
|
|
/* supported values: 2, 4, 8 */
|
|
unsigned long v = simple_strtoul(buf, NULL, 10);
|
|
|
|
switch (v) {
|
|
case 2: v = 1; break;
|
|
case 4: v = 2; break;
|
|
case 8: v = 3; break;
|
|
default:
|
|
dev_err(&client->dev, "fan_ripple value %ld not supported. "
|
|
"Must be one of 2, 4 or 8!\n", v);
|
|
return -EINVAL;
|
|
}
|
|
|
|
down(&data->update_lock);
|
|
/* bits 2..7 reserved => mask with 0x03 */
|
|
data->fan_ripple[nr - 1] &= ~0x03;
|
|
data->fan_ripple[nr - 1] |= v;
|
|
|
|
fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr)
|
|
{
|
|
return sprintf(buf, "%u\n", data->pwm[nr - 1]);
|
|
}
|
|
|
|
static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data,
|
|
const char *buf, size_t count, int nr, int reg)
|
|
{
|
|
unsigned long v = simple_strtoul(buf, NULL, 10);
|
|
|
|
/* Range: 0..255 */
|
|
if (v < 0) v = 0;
|
|
if (v > 255) v = 255;
|
|
|
|
down(&data->update_lock);
|
|
data->pwm[nr - 1] = v;
|
|
fscpos_write_value(client, reg, data->pwm[nr - 1]);
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static void reset_fan_alarm(struct i2c_client *client, int nr)
|
|
{
|
|
fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4);
|
|
}
|
|
|
|
/* Volts */
|
|
#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255)
|
|
|
|
static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct fscpos_data *data = fscpos_update_device(dev);
|
|
return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200));
|
|
}
|
|
|
|
static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct fscpos_data *data = fscpos_update_device(dev);
|
|
return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600));
|
|
}
|
|
|
|
static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct fscpos_data *data = fscpos_update_device(dev);
|
|
return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300));
|
|
}
|
|
|
|
/* Watchdog */
|
|
static ssize_t show_wdog_control(struct fscpos_data *data, char *buf)
|
|
{
|
|
/* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */
|
|
return sprintf(buf, "%u\n", data->wdog_control & 0xb0);
|
|
}
|
|
|
|
static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data
|
|
*data, const char *buf, size_t count, int reg)
|
|
{
|
|
/* bits 0..3 reserved => mask with 0xf0 */
|
|
unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
|
|
|
|
down(&data->update_lock);
|
|
data->wdog_control &= ~0xf0;
|
|
data->wdog_control |= v;
|
|
fscpos_write_value(client, reg, data->wdog_control);
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_wdog_state(struct fscpos_data *data, char *buf)
|
|
{
|
|
/* bits 0, 2..7 reserved => mask with 0x02 */
|
|
return sprintf(buf, "%u\n", data->wdog_state & 0x02);
|
|
}
|
|
|
|
static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data
|
|
*data, const char *buf, size_t count, int reg)
|
|
{
|
|
unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
|
|
|
|
/* Valid values: 2 (clear) */
|
|
if (v != 2) {
|
|
dev_err(&client->dev, "wdog_state value %ld not supported. "
|
|
"Must be 2 to clear the state!\n", v);
|
|
return -EINVAL;
|
|
}
|
|
|
|
down(&data->update_lock);
|
|
data->wdog_state &= ~v;
|
|
fscpos_write_value(client, reg, v);
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", data->wdog_preset);
|
|
}
|
|
|
|
static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data
|
|
*data, const char *buf, size_t count, int reg)
|
|
{
|
|
unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
|
|
|
|
down(&data->update_lock);
|
|
data->wdog_preset = v;
|
|
fscpos_write_value(client, reg, data->wdog_preset);
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/* Event */
|
|
static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
/* bits 5..7 reserved => mask with 0x1f */
|
|
struct fscpos_data *data = fscpos_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->global_event & 0x9b);
|
|
}
|
|
|
|
/*
|
|
* Sysfs stuff
|
|
*/
|
|
#define create_getter(kind, sub) \
|
|
static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct fscpos_data *data = fscpos_update_device(dev); \
|
|
return show_##kind##sub(data, buf); \
|
|
}
|
|
|
|
#define create_getter_n(kind, offset, sub) \
|
|
static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\
|
|
*buf) \
|
|
{ \
|
|
struct fscpos_data *data = fscpos_update_device(dev); \
|
|
return show_##kind##sub(data, buf, offset); \
|
|
}
|
|
|
|
#define create_setter(kind, sub, reg) \
|
|
static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \
|
|
*buf, size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct fscpos_data *data = i2c_get_clientdata(client); \
|
|
return set_##kind##sub(client, data, buf, count, reg); \
|
|
}
|
|
|
|
#define create_setter_n(kind, offset, sub, reg) \
|
|
static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct fscpos_data *data = i2c_get_clientdata(client); \
|
|
return set_##kind##sub(client, data, buf, count, offset, reg);\
|
|
}
|
|
|
|
#define create_sysfs_device_ro(kind, sub, offset) \
|
|
static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \
|
|
sysfs_show_##kind##offset##sub, NULL);
|
|
|
|
#define create_sysfs_device_rw(kind, sub, offset) \
|
|
static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \
|
|
sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub);
|
|
|
|
#define sysfs_ro_n(kind, sub, offset) \
|
|
create_getter_n(kind, offset, sub); \
|
|
create_sysfs_device_ro(kind, sub, offset);
|
|
|
|
#define sysfs_rw_n(kind, sub, offset, reg) \
|
|
create_getter_n(kind, offset, sub); \
|
|
create_setter_n(kind, offset, sub, reg); \
|
|
create_sysfs_device_rw(kind, sub, offset);
|
|
|
|
#define sysfs_rw(kind, sub, reg) \
|
|
create_getter(kind, sub); \
|
|
create_setter(kind, sub, reg); \
|
|
create_sysfs_device_rw(kind, sub,);
|
|
|
|
#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \
|
|
sysfs_fan(offset, reg_status, reg_ripple); \
|
|
sysfs_rw_n(pwm,, offset, reg_min);
|
|
|
|
#define sysfs_fan(offset, reg_status, reg_ripple) \
|
|
sysfs_ro_n(fan, _input, offset); \
|
|
sysfs_ro_n(fan, _status, offset); \
|
|
sysfs_rw_n(fan, _ripple, offset, reg_ripple);
|
|
|
|
#define sysfs_temp(offset, reg_status) \
|
|
sysfs_ro_n(temp, _input, offset); \
|
|
sysfs_ro_n(temp, _status, offset); \
|
|
sysfs_rw_n(temp, _reset, offset, reg_status);
|
|
|
|
#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \
|
|
sysfs_rw(wdog, _control, reg_wdog_control); \
|
|
sysfs_rw(wdog, _preset, reg_wdog_preset); \
|
|
sysfs_rw(wdog, _state, reg_wdog_state);
|
|
|
|
sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0],
|
|
FSCPOS_REG_PWM[0]);
|
|
sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1],
|
|
FSCPOS_REG_PWM[1]);
|
|
sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]);
|
|
|
|
sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]);
|
|
sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]);
|
|
sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]);
|
|
|
|
sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE,
|
|
FSCPOS_REG_WDOG_CONTROL);
|
|
|
|
static DEVICE_ATTR(event, S_IRUGO, show_event, NULL);
|
|
static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL);
|
|
static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL);
|
|
static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL);
|
|
|
|
static int fscpos_attach_adapter(struct i2c_adapter *adapter)
|
|
{
|
|
if (!(adapter->class & I2C_CLASS_HWMON))
|
|
return 0;
|
|
return i2c_detect(adapter, &addr_data, fscpos_detect);
|
|
}
|
|
|
|
int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
|
|
{
|
|
struct i2c_client *new_client;
|
|
struct fscpos_data *data;
|
|
int err = 0;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
goto exit;
|
|
|
|
/*
|
|
* OK. For now, we presume we have a valid client. We now create the
|
|
* client structure, even though we cannot fill it completely yet.
|
|
* But it allows us to access fscpos_{read,write}_value.
|
|
*/
|
|
|
|
if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
memset(data, 0, sizeof(struct fscpos_data));
|
|
|
|
new_client = &data->client;
|
|
i2c_set_clientdata(new_client, data);
|
|
new_client->addr = address;
|
|
new_client->adapter = adapter;
|
|
new_client->driver = &fscpos_driver;
|
|
new_client->flags = 0;
|
|
|
|
/* Do the remaining detection unless force or force_fscpos parameter */
|
|
if (kind < 0) {
|
|
if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0)
|
|
!= 0x50) /* 'P' */
|
|
|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1)
|
|
!= 0x45) /* 'E' */
|
|
|| (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
|
|
!= 0x47))/* 'G' */
|
|
{
|
|
dev_dbg(&new_client->dev, "fscpos detection failed\n");
|
|
goto exit_free;
|
|
}
|
|
}
|
|
|
|
/* Fill in the remaining client fields and put it in the global list */
|
|
strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE);
|
|
|
|
data->valid = 0;
|
|
init_MUTEX(&data->update_lock);
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
if ((err = i2c_attach_client(new_client)))
|
|
goto exit_free;
|
|
|
|
/* Inizialize the fscpos chip */
|
|
fscpos_init_client(new_client);
|
|
|
|
/* Announce that the chip was found */
|
|
dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision);
|
|
|
|
/* Register sysfs hooks */
|
|
device_create_file(&new_client->dev, &dev_attr_event);
|
|
device_create_file(&new_client->dev, &dev_attr_in0_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in1_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in2_input);
|
|
device_create_file(&new_client->dev, &dev_attr_wdog_control);
|
|
device_create_file(&new_client->dev, &dev_attr_wdog_preset);
|
|
device_create_file(&new_client->dev, &dev_attr_wdog_state);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_input);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_status);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_reset);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_input);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_status);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_reset);
|
|
device_create_file(&new_client->dev, &dev_attr_temp3_input);
|
|
device_create_file(&new_client->dev, &dev_attr_temp3_status);
|
|
device_create_file(&new_client->dev, &dev_attr_temp3_reset);
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_input);
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_status);
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_ripple);
|
|
device_create_file(&new_client->dev, &dev_attr_pwm1);
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_input);
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_status);
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_ripple);
|
|
device_create_file(&new_client->dev, &dev_attr_pwm2);
|
|
device_create_file(&new_client->dev, &dev_attr_fan3_input);
|
|
device_create_file(&new_client->dev, &dev_attr_fan3_status);
|
|
device_create_file(&new_client->dev, &dev_attr_fan3_ripple);
|
|
|
|
return 0;
|
|
|
|
exit_free:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int fscpos_detach_client(struct i2c_client *client)
|
|
{
|
|
int err;
|
|
|
|
if ((err = i2c_detach_client(client))) {
|
|
dev_err(&client->dev, "Client deregistration failed, client"
|
|
" not detached.\n");
|
|
return err;
|
|
}
|
|
kfree(i2c_get_clientdata(client));
|
|
return 0;
|
|
}
|
|
|
|
static int fscpos_read_value(struct i2c_client *client, u8 reg)
|
|
{
|
|
dev_dbg(&client->dev, "Read reg 0x%02x\n", reg);
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
}
|
|
|
|
static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value)
|
|
{
|
|
dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value);
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
/* Called when we have found a new FSCPOS chip */
|
|
static void fscpos_init_client(struct i2c_client *client)
|
|
{
|
|
struct fscpos_data *data = i2c_get_clientdata(client);
|
|
|
|
/* read revision from chip */
|
|
data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION);
|
|
}
|
|
|
|
static struct fscpos_data *fscpos_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct fscpos_data *data = i2c_get_clientdata(client);
|
|
|
|
down(&data->update_lock);
|
|
|
|
if ((jiffies - data->last_updated > 2 * HZ) ||
|
|
(jiffies < data->last_updated) || !data->valid) {
|
|
int i;
|
|
|
|
dev_dbg(&client->dev, "Starting fscpos update\n");
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
data->temp_act[i] = fscpos_read_value(client,
|
|
FSCPOS_REG_TEMP_ACT[i]);
|
|
data->temp_status[i] = fscpos_read_value(client,
|
|
FSCPOS_REG_TEMP_STATE[i]);
|
|
data->fan_act[i] = fscpos_read_value(client,
|
|
FSCPOS_REG_FAN_ACT[i]);
|
|
data->fan_status[i] = fscpos_read_value(client,
|
|
FSCPOS_REG_FAN_STATE[i]);
|
|
data->fan_ripple[i] = fscpos_read_value(client,
|
|
FSCPOS_REG_FAN_RIPPLE[i]);
|
|
if (i < 2) {
|
|
/* fan2_min is not supported by the chip */
|
|
data->pwm[i] = fscpos_read_value(client,
|
|
FSCPOS_REG_PWM[i]);
|
|
}
|
|
/* reset fan status if speed is back to > 0 */
|
|
if (data->fan_status[i] != 0 && data->fan_act[i] > 0) {
|
|
reset_fan_alarm(client, i);
|
|
}
|
|
}
|
|
|
|
data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12);
|
|
data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5);
|
|
data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT);
|
|
|
|
data->wdog_preset = fscpos_read_value(client,
|
|
FSCPOS_REG_WDOG_PRESET);
|
|
data->wdog_state = fscpos_read_value(client,
|
|
FSCPOS_REG_WDOG_STATE);
|
|
data->wdog_control = fscpos_read_value(client,
|
|
FSCPOS_REG_WDOG_CONTROL);
|
|
|
|
data->global_event = fscpos_read_value(client,
|
|
FSCPOS_REG_EVENT_STATE);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
up(&data->update_lock);
|
|
return data;
|
|
}
|
|
|
|
static int __init sm_fscpos_init(void)
|
|
{
|
|
return i2c_add_driver(&fscpos_driver);
|
|
}
|
|
|
|
static void __exit sm_fscpos_exit(void)
|
|
{
|
|
i2c_del_driver(&fscpos_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung "
|
|
"<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>"
|
|
" and Philip Edelbrock <phil@netroedge.com>");
|
|
MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sm_fscpos_init);
|
|
module_exit(sm_fscpos_exit);
|