![Andy Fleming](/assets/img/avatar_default.png)
* Cleaned up interrupt mapping a little by adding a helper function which parses the irq out of the device-tree, and puts it into a resource. * Changed the arch/ppc platform files to specify PHY_POLL, instead of -1 * Changed the fixed phy to use PHY_IGNORE_INTERRUPT * Added ethtool.h and mii.h to phy.h includes Signed-off-by: Paul Mackerras <paulus@samba.org>
304 lines
7.3 KiB
C
304 lines
7.3 KiB
C
/*
|
|
* MPC8560ADS board specific routines
|
|
*
|
|
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
|
|
*
|
|
* Copyright 2004 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/major.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/tty.h> /* for linux/serial_core.h */
|
|
#include <linux/serial_core.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/module.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/fs_enet_pd.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/open_pic.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/mpc85xx.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/kgdb.h>
|
|
#include <asm/ppc_sys.h>
|
|
#include <asm/cpm2.h>
|
|
#include <mm/mmu_decl.h>
|
|
|
|
#include <syslib/cpm2_pic.h>
|
|
#include <syslib/ppc85xx_common.h>
|
|
#include <syslib/ppc85xx_setup.h>
|
|
|
|
|
|
/* ************************************************************************
|
|
*
|
|
* Setup the architecture
|
|
*
|
|
*/
|
|
static void init_fcc_ioports(void)
|
|
{
|
|
struct immap *immap;
|
|
struct io_port *io;
|
|
u32 tempval;
|
|
|
|
immap = cpm2_immr;
|
|
|
|
io = &immap->im_ioport;
|
|
/* FCC2/3 are on the ports B/C. */
|
|
tempval = in_be32(&io->iop_pdirb);
|
|
tempval &= ~PB2_DIRB0;
|
|
tempval |= PB2_DIRB1;
|
|
out_be32(&io->iop_pdirb, tempval);
|
|
|
|
tempval = in_be32(&io->iop_psorb);
|
|
tempval &= ~PB2_PSORB0;
|
|
tempval |= PB2_PSORB1;
|
|
out_be32(&io->iop_psorb, tempval);
|
|
|
|
tempval = in_be32(&io->iop_pparb);
|
|
tempval |= (PB2_DIRB0 | PB2_DIRB1);
|
|
out_be32(&io->iop_pparb, tempval);
|
|
|
|
tempval = in_be32(&io->iop_pdirb);
|
|
tempval &= ~PB3_DIRB0;
|
|
tempval |= PB3_DIRB1;
|
|
out_be32(&io->iop_pdirb, tempval);
|
|
|
|
tempval = in_be32(&io->iop_psorb);
|
|
tempval &= ~PB3_PSORB0;
|
|
tempval |= PB3_PSORB1;
|
|
out_be32(&io->iop_psorb, tempval);
|
|
|
|
tempval = in_be32(&io->iop_pparb);
|
|
tempval |= (PB3_DIRB0 | PB3_DIRB1);
|
|
out_be32(&io->iop_pparb, tempval);
|
|
|
|
tempval = in_be32(&io->iop_pdirc);
|
|
tempval |= PC3_DIRC1;
|
|
out_be32(&io->iop_pdirc, tempval);
|
|
|
|
tempval = in_be32(&io->iop_pparc);
|
|
tempval |= PC3_DIRC1;
|
|
out_be32(&io->iop_pparc, tempval);
|
|
|
|
/* Port C has clocks...... */
|
|
tempval = in_be32(&io->iop_psorc);
|
|
tempval &= ~(CLK_TRX);
|
|
out_be32(&io->iop_psorc, tempval);
|
|
|
|
tempval = in_be32(&io->iop_pdirc);
|
|
tempval &= ~(CLK_TRX);
|
|
out_be32(&io->iop_pdirc, tempval);
|
|
tempval = in_be32(&io->iop_pparc);
|
|
tempval |= (CLK_TRX);
|
|
out_be32(&io->iop_pparc, tempval);
|
|
|
|
/* Configure Serial Interface clock routing.
|
|
* First, clear all FCC bits to zero,
|
|
* then set the ones we want.
|
|
*/
|
|
immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK);
|
|
immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE;
|
|
}
|
|
|
|
static void __init
|
|
mpc8560ads_setup_arch(void)
|
|
{
|
|
bd_t *binfo = (bd_t *) __res;
|
|
unsigned int freq;
|
|
struct gianfar_platform_data *pdata;
|
|
struct gianfar_mdio_data *mdata;
|
|
struct fs_platform_info *fpi;
|
|
|
|
cpm2_reset();
|
|
|
|
/* get the core frequency */
|
|
freq = binfo->bi_intfreq;
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc8560ads_setup_arch()", 0);
|
|
|
|
/* Set loops_per_jiffy to a half-way reasonable value,
|
|
for use until calibrate_delay gets called. */
|
|
loops_per_jiffy = freq / HZ;
|
|
|
|
#ifdef CONFIG_PCI
|
|
/* setup PCI host bridges */
|
|
mpc85xx_setup_hose();
|
|
#endif
|
|
|
|
/* setup the board related info for the MDIO bus */
|
|
mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
|
|
|
|
mdata->irq[0] = MPC85xx_IRQ_EXT5;
|
|
mdata->irq[1] = MPC85xx_IRQ_EXT5;
|
|
mdata->irq[2] = PHY_POLL;
|
|
mdata->irq[3] = MPC85xx_IRQ_EXT5;
|
|
mdata->irq[31] = PHY_POLL;
|
|
|
|
/* setup the board related information for the enet controllers */
|
|
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
|
|
if (pdata) {
|
|
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
|
|
pdata->bus_id = 0;
|
|
pdata->phy_id = 0;
|
|
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
|
|
}
|
|
|
|
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
|
|
if (pdata) {
|
|
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
|
|
pdata->bus_id = 0;
|
|
pdata->phy_id = 1;
|
|
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
|
|
}
|
|
|
|
init_fcc_ioports();
|
|
ppc_sys_device_remove(MPC85xx_CPM_FCC1);
|
|
|
|
fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2);
|
|
if (fpi) {
|
|
memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
|
|
fpi->bus_id = "0:02";
|
|
fpi->phy_addr = 2;
|
|
fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
|
|
fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1];
|
|
}
|
|
|
|
fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3);
|
|
if (fpi) {
|
|
memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
|
|
fpi->macaddr[5] += 1;
|
|
fpi->bus_id = "0:03";
|
|
fpi->phy_addr = 3;
|
|
fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
|
|
fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2];
|
|
}
|
|
|
|
#ifdef CONFIG_BLK_DEV_INITRD
|
|
if (initrd_start)
|
|
ROOT_DEV = Root_RAM0;
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_ROOT_NFS
|
|
ROOT_DEV = Root_NFS;
|
|
#else
|
|
ROOT_DEV = Root_HDA1;
|
|
#endif
|
|
}
|
|
|
|
static irqreturn_t cpm2_cascade(int irq, void *dev_id)
|
|
{
|
|
while ((irq = cpm2_get_irq()) >= 0)
|
|
__do_IRQ(irq);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction cpm2_irqaction = {
|
|
.handler = cpm2_cascade,
|
|
.flags = IRQF_DISABLED,
|
|
.mask = CPU_MASK_NONE,
|
|
.name = "cpm2_cascade",
|
|
};
|
|
|
|
static void __init
|
|
mpc8560_ads_init_IRQ(void)
|
|
{
|
|
/* Setup OpenPIC */
|
|
mpc85xx_ads_init_IRQ();
|
|
|
|
/* Setup CPM2 PIC */
|
|
cpm2_init_IRQ();
|
|
|
|
setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
|
|
/* ************************************************************************ */
|
|
void __init
|
|
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
|
unsigned long r6, unsigned long r7)
|
|
{
|
|
/* parse_bootinfo must always be called first */
|
|
parse_bootinfo(find_bootinfo());
|
|
|
|
/*
|
|
* If we were passed in a board information, copy it into the
|
|
* residual data area.
|
|
*/
|
|
if (r3) {
|
|
memcpy((void *) __res, (void *) (r3 + KERNELBASE),
|
|
sizeof (bd_t));
|
|
|
|
}
|
|
#if defined(CONFIG_BLK_DEV_INITRD)
|
|
/*
|
|
* If the init RAM disk has been configured in, and there's a valid
|
|
* starting address for it, set it up.
|
|
*/
|
|
if (r4) {
|
|
initrd_start = r4 + KERNELBASE;
|
|
initrd_end = r5 + KERNELBASE;
|
|
}
|
|
#endif /* CONFIG_BLK_DEV_INITRD */
|
|
|
|
/* Copy the kernel command line arguments to a safe place. */
|
|
|
|
if (r6) {
|
|
*(char *) (r7 + KERNELBASE) = 0;
|
|
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
|
|
}
|
|
|
|
identify_ppc_sys_by_id(mfspr(SPRN_SVR));
|
|
|
|
/* setup the PowerPC module struct */
|
|
ppc_md.setup_arch = mpc8560ads_setup_arch;
|
|
ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
|
|
|
|
ppc_md.init_IRQ = mpc8560_ads_init_IRQ;
|
|
ppc_md.get_irq = openpic_get_irq;
|
|
|
|
ppc_md.restart = mpc85xx_restart;
|
|
ppc_md.power_off = mpc85xx_power_off;
|
|
ppc_md.halt = mpc85xx_halt;
|
|
|
|
ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
|
|
|
|
ppc_md.time_init = NULL;
|
|
ppc_md.set_rtc_time = NULL;
|
|
ppc_md.get_rtc_time = NULL;
|
|
ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc8560ads_init(): exit", 0);
|
|
|
|
return;
|
|
}
|