![Paolo Ciarrocchi](/assets/img/avatar_default.png)
Before: total: 15 errors, 10 warnings, 308 lines checked After: total: 0 errors, 4 warnings, 308 lines checked paolo@paolo-desktop:~/linux.trees.git$ md5sum /tmp/elafreq.o.* add1d36c2f077c5aab7682e8642a9f34 /tmp/elafreq.o.after add1d36c2f077c5aab7682e8642a9f34 /tmp/elafreq.o.before paolo@paolo-desktop:~/linux.trees.git$ size /tmp/elafreq.o.* text data bss dec hex filename 934 270 4 1208 4b8 /tmp/elafreq.o.after 934 270 4 1208 4b8 /tmp/elafreq.o.before Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
309 lines
7.5 KiB
C
309 lines
7.5 KiB
C
/*
|
|
* elanfreq: cpufreq driver for the AMD ELAN family
|
|
*
|
|
* (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
|
|
*
|
|
* Parts of this code are (c) Sven Geggus <sven@geggus.net>
|
|
*
|
|
* All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/cpufreq.h>
|
|
|
|
#include <asm/msr.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/io.h>
|
|
|
|
#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
|
|
#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
|
|
|
|
/* Module parameter */
|
|
static int max_freq;
|
|
|
|
struct s_elan_multiplier {
|
|
int clock; /* frequency in kHz */
|
|
int val40h; /* PMU Force Mode register */
|
|
int val80h; /* CPU Clock Speed Register */
|
|
};
|
|
|
|
/*
|
|
* It is important that the frequencies
|
|
* are listed in ascending order here!
|
|
*/
|
|
static struct s_elan_multiplier elan_multiplier[] = {
|
|
{1000, 0x02, 0x18},
|
|
{2000, 0x02, 0x10},
|
|
{4000, 0x02, 0x08},
|
|
{8000, 0x00, 0x00},
|
|
{16000, 0x00, 0x02},
|
|
{33000, 0x00, 0x04},
|
|
{66000, 0x01, 0x04},
|
|
{99000, 0x01, 0x05}
|
|
};
|
|
|
|
static struct cpufreq_frequency_table elanfreq_table[] = {
|
|
{0, 1000},
|
|
{1, 2000},
|
|
{2, 4000},
|
|
{3, 8000},
|
|
{4, 16000},
|
|
{5, 33000},
|
|
{6, 66000},
|
|
{7, 99000},
|
|
{0, CPUFREQ_TABLE_END},
|
|
};
|
|
|
|
|
|
/**
|
|
* elanfreq_get_cpu_frequency: determine current cpu speed
|
|
*
|
|
* Finds out at which frequency the CPU of the Elan SOC runs
|
|
* at the moment. Frequencies from 1 to 33 MHz are generated
|
|
* the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
|
|
* and have the rest of the chip running with 33 MHz.
|
|
*/
|
|
|
|
static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
|
|
{
|
|
u8 clockspeed_reg; /* Clock Speed Register */
|
|
|
|
local_irq_disable();
|
|
outb_p(0x80, REG_CSCIR);
|
|
clockspeed_reg = inb_p(REG_CSCDR);
|
|
local_irq_enable();
|
|
|
|
if ((clockspeed_reg & 0xE0) == 0xE0)
|
|
return 0;
|
|
|
|
/* Are we in CPU clock multiplied mode (66/99 MHz)? */
|
|
if ((clockspeed_reg & 0xE0) == 0xC0) {
|
|
if ((clockspeed_reg & 0x01) == 0)
|
|
return 66000;
|
|
else
|
|
return 99000;
|
|
}
|
|
|
|
/* 33 MHz is not 32 MHz... */
|
|
if ((clockspeed_reg & 0xE0) == 0xA0)
|
|
return 33000;
|
|
|
|
return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
|
|
}
|
|
|
|
|
|
/**
|
|
* elanfreq_set_cpu_frequency: Change the CPU core frequency
|
|
* @cpu: cpu number
|
|
* @freq: frequency in kHz
|
|
*
|
|
* This function takes a frequency value and changes the CPU frequency
|
|
* according to this. Note that the frequency has to be checked by
|
|
* elanfreq_validatespeed() for correctness!
|
|
*
|
|
* There is no return value.
|
|
*/
|
|
|
|
static void elanfreq_set_cpu_state(unsigned int state)
|
|
{
|
|
struct cpufreq_freqs freqs;
|
|
|
|
freqs.old = elanfreq_get_cpu_frequency(0);
|
|
freqs.new = elan_multiplier[state].clock;
|
|
freqs.cpu = 0; /* elanfreq.c is UP only driver */
|
|
|
|
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
|
|
|
printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
|
|
elan_multiplier[state].clock);
|
|
|
|
|
|
/*
|
|
* Access to the Elan's internal registers is indexed via
|
|
* 0x22: Chip Setup & Control Register Index Register (CSCI)
|
|
* 0x23: Chip Setup & Control Register Data Register (CSCD)
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* 0x40 is the Power Management Unit's Force Mode Register.
|
|
* Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
|
|
*/
|
|
|
|
local_irq_disable();
|
|
outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */
|
|
outb_p(0x00, REG_CSCDR);
|
|
local_irq_enable(); /* wait till internal pipelines and */
|
|
udelay(1000); /* buffers have cleaned up */
|
|
|
|
local_irq_disable();
|
|
|
|
/* now, set the CPU clock speed register (0x80) */
|
|
outb_p(0x80, REG_CSCIR);
|
|
outb_p(elan_multiplier[state].val80h, REG_CSCDR);
|
|
|
|
/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
|
|
outb_p(0x40, REG_CSCIR);
|
|
outb_p(elan_multiplier[state].val40h, REG_CSCDR);
|
|
udelay(10000);
|
|
local_irq_enable();
|
|
|
|
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
|
};
|
|
|
|
|
|
/**
|
|
* elanfreq_validatespeed: test if frequency range is valid
|
|
* @policy: the policy to validate
|
|
*
|
|
* This function checks if a given frequency range in kHz is valid
|
|
* for the hardware supported by the driver.
|
|
*/
|
|
|
|
static int elanfreq_verify(struct cpufreq_policy *policy)
|
|
{
|
|
return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
|
|
}
|
|
|
|
static int elanfreq_target(struct cpufreq_policy *policy,
|
|
unsigned int target_freq,
|
|
unsigned int relation)
|
|
{
|
|
unsigned int newstate = 0;
|
|
|
|
if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
|
|
return -EINVAL;
|
|
|
|
elanfreq_set_cpu_state(newstate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Module init and exit code
|
|
*/
|
|
|
|
static int elanfreq_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
struct cpuinfo_x86 *c = &cpu_data(0);
|
|
unsigned int i;
|
|
int result;
|
|
|
|
/* capability check */
|
|
if ((c->x86_vendor != X86_VENDOR_AMD) ||
|
|
(c->x86 != 4) || (c->x86_model != 10))
|
|
return -ENODEV;
|
|
|
|
/* max freq */
|
|
if (!max_freq)
|
|
max_freq = elanfreq_get_cpu_frequency(0);
|
|
|
|
/* table init */
|
|
for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
|
|
if (elanfreq_table[i].frequency > max_freq)
|
|
elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
|
|
}
|
|
|
|
/* cpuinfo and default policy values */
|
|
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
|
|
policy->cur = elanfreq_get_cpu_frequency(0);
|
|
|
|
result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
|
|
if (result)
|
|
return result;
|
|
|
|
cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
|
|
{
|
|
cpufreq_frequency_table_put_attr(policy->cpu);
|
|
return 0;
|
|
}
|
|
|
|
|
|
#ifndef MODULE
|
|
/**
|
|
* elanfreq_setup - elanfreq command line parameter parsing
|
|
*
|
|
* elanfreq command line parameter. Use:
|
|
* elanfreq=66000
|
|
* to set the maximum CPU frequency to 66 MHz. Note that in
|
|
* case you do not give this boot parameter, the maximum
|
|
* frequency will fall back to _current_ CPU frequency which
|
|
* might be lower. If you build this as a module, use the
|
|
* max_freq module parameter instead.
|
|
*/
|
|
static int __init elanfreq_setup(char *str)
|
|
{
|
|
max_freq = simple_strtoul(str, &str, 0);
|
|
printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
|
|
return 1;
|
|
}
|
|
__setup("elanfreq=", elanfreq_setup);
|
|
#endif
|
|
|
|
|
|
static struct freq_attr *elanfreq_attr[] = {
|
|
&cpufreq_freq_attr_scaling_available_freqs,
|
|
NULL,
|
|
};
|
|
|
|
|
|
static struct cpufreq_driver elanfreq_driver = {
|
|
.get = elanfreq_get_cpu_frequency,
|
|
.verify = elanfreq_verify,
|
|
.target = elanfreq_target,
|
|
.init = elanfreq_cpu_init,
|
|
.exit = elanfreq_cpu_exit,
|
|
.name = "elanfreq",
|
|
.owner = THIS_MODULE,
|
|
.attr = elanfreq_attr,
|
|
};
|
|
|
|
|
|
static int __init elanfreq_init(void)
|
|
{
|
|
struct cpuinfo_x86 *c = &cpu_data(0);
|
|
|
|
/* Test if we have the right hardware */
|
|
if ((c->x86_vendor != X86_VENDOR_AMD) ||
|
|
(c->x86 != 4) || (c->x86_model != 10)) {
|
|
printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
|
|
return -ENODEV;
|
|
}
|
|
return cpufreq_register_driver(&elanfreq_driver);
|
|
}
|
|
|
|
|
|
static void __exit elanfreq_exit(void)
|
|
{
|
|
cpufreq_unregister_driver(&elanfreq_driver);
|
|
}
|
|
|
|
|
|
module_param(max_freq, int, 0444);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
|
|
MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
|
|
|
|
module_init(elanfreq_init);
|
|
module_exit(elanfreq_exit);
|