![Kristoffer Nyborg Gregertsen](/assets/img/avatar_default.png)
This patch makes the SMC configuration take timings in clock cycles instead of nanoseconds. A function to calculate timings in clock cycles is added. This patch removes the rounding troubles of the previous SMC configuration method. [hskinnemoen@atmel.com: fix atstk1002/atngw100 flash config] Signed-off-by: Kristoffer Nyborg Gregertsen <gregerts@stud.ntnu.no> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
114 lines
2.4 KiB
C
114 lines
2.4 KiB
C
/*
|
|
* Static Memory Controller for AT32 chips
|
|
*
|
|
* Copyright (C) 2006 Atmel Corporation
|
|
*
|
|
* Inspired by the OMAP2 General-Purpose Memory Controller interface
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#ifndef __ARCH_AT32AP_SMC_H
|
|
#define __ARCH_AT32AP_SMC_H
|
|
|
|
/*
|
|
* All timing parameters are in nanoseconds.
|
|
*/
|
|
struct smc_timing {
|
|
/* Delay from address valid to assertion of given strobe */
|
|
int ncs_read_setup;
|
|
int nrd_setup;
|
|
int ncs_write_setup;
|
|
int nwe_setup;
|
|
|
|
/* Pulse length of given strobe */
|
|
int ncs_read_pulse;
|
|
int nrd_pulse;
|
|
int ncs_write_pulse;
|
|
int nwe_pulse;
|
|
|
|
/* Total cycle length of given operation */
|
|
int read_cycle;
|
|
int write_cycle;
|
|
|
|
/* Minimal recovery times, will extend cycle if needed */
|
|
int ncs_read_recover;
|
|
int nrd_recover;
|
|
int ncs_write_recover;
|
|
int nwe_recover;
|
|
};
|
|
|
|
/*
|
|
* All timing parameters are in clock cycles.
|
|
*/
|
|
struct smc_config {
|
|
|
|
/* Delay from address valid to assertion of given strobe */
|
|
u8 ncs_read_setup;
|
|
u8 nrd_setup;
|
|
u8 ncs_write_setup;
|
|
u8 nwe_setup;
|
|
|
|
/* Pulse length of given strobe */
|
|
u8 ncs_read_pulse;
|
|
u8 nrd_pulse;
|
|
u8 ncs_write_pulse;
|
|
u8 nwe_pulse;
|
|
|
|
/* Total cycle length of given operation */
|
|
u8 read_cycle;
|
|
u8 write_cycle;
|
|
|
|
/* Bus width in bytes */
|
|
u8 bus_width;
|
|
|
|
/*
|
|
* 0: Data is sampled on rising edge of NCS
|
|
* 1: Data is sampled on rising edge of NRD
|
|
*/
|
|
unsigned int nrd_controlled:1;
|
|
|
|
/*
|
|
* 0: Data is driven on falling edge of NCS
|
|
* 1: Data is driven on falling edge of NWR
|
|
*/
|
|
unsigned int nwe_controlled:1;
|
|
|
|
/*
|
|
* 0: NWAIT is disabled
|
|
* 1: Reserved
|
|
* 2: NWAIT is frozen mode
|
|
* 3: NWAIT in ready mode
|
|
*/
|
|
unsigned int nwait_mode:2;
|
|
|
|
/*
|
|
* 0: Byte select access type
|
|
* 1: Byte write access type
|
|
*/
|
|
unsigned int byte_write:1;
|
|
|
|
/*
|
|
* Number of clock cycles before data is released after
|
|
* the rising edge of the read controlling signal
|
|
*
|
|
* Total cycles from SMC is tdf_cycles + 1
|
|
*/
|
|
unsigned int tdf_cycles:4;
|
|
|
|
/*
|
|
* 0: TDF optimization disabled
|
|
* 1: TDF optimization enabled
|
|
*/
|
|
unsigned int tdf_mode:1;
|
|
};
|
|
|
|
extern void smc_set_timing(struct smc_config *config,
|
|
const struct smc_timing *timing);
|
|
|
|
extern int smc_set_configuration(int cs, const struct smc_config *config);
|
|
extern struct smc_config *smc_get_configuration(int cs);
|
|
|
|
#endif /* __ARCH_AT32AP_SMC_H */
|