f8942e07a3
The Sprint 4G network uses a Wimax dongle with Beecem chipset. The driver is typical of out of tree drivers, but maybe useful for people, and the hardware is readily available. Here is a staging ready version (i.e warts and all) 0. Started with Rel_5.2.7.3P1_USB from Sprint4GDeveloperPack-1.1 1. Consolidated files in staging 2. Remove Dos cr/lf 3. Remove unnecessary ioctl from usbbcm_fops Applied patches that were in the developer pack, surprising there were ones for 2.6.35 already. This is compile tested only, see TODO for what still needs to be done. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
107 lines
3.3 KiB
C
107 lines
3.3 KiB
C
#ifndef _LED_CONTROL_H
|
|
#define _LED_CONTROL_H
|
|
|
|
/*************************TYPE DEF**********************/
|
|
#define NUM_OF_LEDS 4
|
|
|
|
#define DSD_START_OFFSET 0x0200
|
|
#define EEPROM_VERSION_OFFSET 0x020E
|
|
#define EEPROM_HW_PARAM_POINTER_ADDRESS 0x0218
|
|
#define EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5 0x0220
|
|
#define GPIO_SECTION_START_OFFSET 0x03
|
|
|
|
#define COMPATIBILITY_SECTION_LENGTH 42
|
|
#define COMPATIBILITY_SECTION_LENGTH_MAP5 84
|
|
|
|
|
|
#define EEPROM_MAP5_MAJORVERSION 5
|
|
#define EEPROM_MAP5_MINORVERSION 0
|
|
|
|
|
|
#define MAX_NUM_OF_BLINKS 10
|
|
#define NUM_OF_GPIO_PINS 16
|
|
|
|
#define DISABLE_GPIO_NUM 0xFF
|
|
#define EVENT_SIGNALED 1
|
|
|
|
#define MAX_FILE_NAME_BUFFER_SIZE 100
|
|
|
|
#define TURN_ON_LED(GPIO, index) do{ \
|
|
UINT gpio_val = GPIO; \
|
|
(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
|
|
wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_SET_REG, &gpio_val ,sizeof(gpio_val)) : \
|
|
wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
|
|
}while(0);
|
|
|
|
#define TURN_OFF_LED(GPIO, index) do { \
|
|
UINT gpio_val = GPIO; \
|
|
(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
|
|
wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_CLR_REG,&gpio_val ,sizeof(gpio_val)) : \
|
|
wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_SET_REG,&gpio_val ,sizeof(gpio_val)); \
|
|
}while(0);
|
|
|
|
#define B_ULONG32 unsigned long
|
|
|
|
/*******************************************************/
|
|
|
|
|
|
typedef enum _LEDColors{
|
|
RED_LED = 1,
|
|
BLUE_LED = 2,
|
|
YELLOW_LED = 3,
|
|
GREEN_LED = 4
|
|
} LEDColors; /*Enumerated values of different LED types*/
|
|
|
|
typedef enum LedEvents {
|
|
SHUTDOWN_EXIT = 0x00,
|
|
DRIVER_INIT = 0x1,
|
|
FW_DOWNLOAD = 0x2,
|
|
FW_DOWNLOAD_DONE = 0x4,
|
|
NO_NETWORK_ENTRY = 0x8,
|
|
NORMAL_OPERATION = 0x10,
|
|
LOWPOWER_MODE_ENTER = 0x20,
|
|
IDLEMODE_CONTINUE = 0x40,
|
|
IDLEMODE_EXIT = 0x80,
|
|
LED_THREAD_INACTIVE = 0x100, //Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold.
|
|
LED_THREAD_ACTIVE = 0x200 //Makes the LED Thread Active back.
|
|
} LedEventInfo_t; /*Enumerated values of different driver states*/
|
|
|
|
#define DRIVER_HALT 0xff
|
|
|
|
|
|
/*Structure which stores the information of different LED types
|
|
* and corresponding LED state information of driver states*/
|
|
typedef struct LedStateInfo_t
|
|
{
|
|
UCHAR LED_Type; /* specify GPIO number - use 0xFF if not used */
|
|
UCHAR LED_On_State; /* Bits set or reset for different states */
|
|
UCHAR LED_Blink_State; /* Bits set or reset for blinking LEDs for different states */
|
|
UCHAR GPIO_Num;
|
|
UCHAR BitPolarity; /*To represent whether H/W is normal polarity or reverse
|
|
polarity*/
|
|
}LEDStateInfo, *pLEDStateInfo;
|
|
|
|
|
|
typedef struct _LED_INFO_STRUCT
|
|
{
|
|
LEDStateInfo LEDState[NUM_OF_LEDS];
|
|
BOOLEAN bIdleMode_tx_from_host; /*Variable to notify whether driver came out
|
|
from idlemode due to Host or target*/
|
|
BOOLEAN bIdle_led_off;
|
|
wait_queue_head_t notify_led_event;
|
|
wait_queue_head_t idleModeSyncEvent;
|
|
struct task_struct *led_cntrl_threadid;
|
|
int led_thread_running;
|
|
BOOLEAN bLedInitDone;
|
|
|
|
} LED_INFO_STRUCT, *PLED_INFO_STRUCT;
|
|
//LED Thread state.
|
|
#define BCM_LED_THREAD_DISABLED 0 //LED Thread is not running.
|
|
#define BCM_LED_THREAD_RUNNING_ACTIVELY 1 //LED thread is running.
|
|
#define BCM_LED_THREAD_RUNNING_INACTIVELY 2 //LED thread has been put on hold
|
|
|
|
|
|
|
|
#endif
|
|
|