Archived
14
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/firewire/fw-device.c
Stefan Richter f8d2dc3938 firewire: fw-core: react on bus resets while the config ROM is being fetched
read_rom() obtained a fresh new fw_device.generation for each read
transaction.  Hence it was able to continue reading in the middle of the
ROM even if a bus reset happened.  However the device may have modified
the ROM during the reset.  We would end up with a corrupt fetched ROM
image then.

Although all of this is quite unlikely, it is not impossible.
Therefore we now restart reading the ROM if the bus generation changed.

Note, the memory barrier in read_rom() is still necessary according to
tests by Jarod Wilson, despite of the ->generation access being moved up
in the call chain.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

This is essentially what I've been beating on locally, and I've yet to hit
another config rom read failure with it.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-01-30 22:22:28 +01:00

857 lines
22 KiB
C

/*
* Device probing and sysfs code.
*
* Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/wait.h>
#include <linux/errno.h>
#include <linux/kthread.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/idr.h>
#include <linux/rwsem.h>
#include <asm/semaphore.h>
#include <asm/system.h>
#include <linux/ctype.h>
#include "fw-transaction.h"
#include "fw-topology.h"
#include "fw-device.h"
void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 * p)
{
ci->p = p + 1;
ci->end = ci->p + (p[0] >> 16);
}
EXPORT_SYMBOL(fw_csr_iterator_init);
int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value)
{
*key = *ci->p >> 24;
*value = *ci->p & 0xffffff;
return ci->p++ < ci->end;
}
EXPORT_SYMBOL(fw_csr_iterator_next);
static int is_fw_unit(struct device *dev);
static int match_unit_directory(u32 * directory, const struct fw_device_id *id)
{
struct fw_csr_iterator ci;
int key, value, match;
match = 0;
fw_csr_iterator_init(&ci, directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
if (key == CSR_VENDOR && value == id->vendor)
match |= FW_MATCH_VENDOR;
if (key == CSR_MODEL && value == id->model)
match |= FW_MATCH_MODEL;
if (key == CSR_SPECIFIER_ID && value == id->specifier_id)
match |= FW_MATCH_SPECIFIER_ID;
if (key == CSR_VERSION && value == id->version)
match |= FW_MATCH_VERSION;
}
return (match & id->match_flags) == id->match_flags;
}
static int fw_unit_match(struct device *dev, struct device_driver *drv)
{
struct fw_unit *unit = fw_unit(dev);
struct fw_driver *driver = fw_driver(drv);
int i;
/* We only allow binding to fw_units. */
if (!is_fw_unit(dev))
return 0;
for (i = 0; driver->id_table[i].match_flags != 0; i++) {
if (match_unit_directory(unit->directory, &driver->id_table[i]))
return 1;
}
return 0;
}
static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size)
{
struct fw_device *device = fw_device(unit->device.parent);
struct fw_csr_iterator ci;
int key, value;
int vendor = 0;
int model = 0;
int specifier_id = 0;
int version = 0;
fw_csr_iterator_init(&ci, &device->config_rom[5]);
while (fw_csr_iterator_next(&ci, &key, &value)) {
switch (key) {
case CSR_VENDOR:
vendor = value;
break;
case CSR_MODEL:
model = value;
break;
}
}
fw_csr_iterator_init(&ci, unit->directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
switch (key) {
case CSR_SPECIFIER_ID:
specifier_id = value;
break;
case CSR_VERSION:
version = value;
break;
}
}
return snprintf(buffer, buffer_size,
"ieee1394:ven%08Xmo%08Xsp%08Xver%08X",
vendor, model, specifier_id, version);
}
static int
fw_unit_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct fw_unit *unit = fw_unit(dev);
char modalias[64];
get_modalias(unit, modalias, sizeof(modalias));
if (add_uevent_var(env, "MODALIAS=%s", modalias))
return -ENOMEM;
return 0;
}
struct bus_type fw_bus_type = {
.name = "firewire",
.match = fw_unit_match,
};
EXPORT_SYMBOL(fw_bus_type);
struct fw_device *fw_device_get(struct fw_device *device)
{
get_device(&device->device);
return device;
}
void fw_device_put(struct fw_device *device)
{
put_device(&device->device);
}
static void fw_device_release(struct device *dev)
{
struct fw_device *device = fw_device(dev);
unsigned long flags;
/*
* Take the card lock so we don't set this to NULL while a
* FW_NODE_UPDATED callback is being handled.
*/
spin_lock_irqsave(&device->card->lock, flags);
device->node->data = NULL;
spin_unlock_irqrestore(&device->card->lock, flags);
fw_node_put(device->node);
fw_card_put(device->card);
kfree(device->config_rom);
kfree(device);
}
int fw_device_enable_phys_dma(struct fw_device *device)
{
int generation = device->generation;
/* device->node_id, accessed below, must not be older than generation */
smp_rmb();
return device->card->driver->enable_phys_dma(device->card,
device->node_id,
generation);
}
EXPORT_SYMBOL(fw_device_enable_phys_dma);
struct config_rom_attribute {
struct device_attribute attr;
u32 key;
};
static ssize_t
show_immediate(struct device *dev, struct device_attribute *dattr, char *buf)
{
struct config_rom_attribute *attr =
container_of(dattr, struct config_rom_attribute, attr);
struct fw_csr_iterator ci;
u32 *dir;
int key, value;
if (is_fw_unit(dev))
dir = fw_unit(dev)->directory;
else
dir = fw_device(dev)->config_rom + 5;
fw_csr_iterator_init(&ci, dir);
while (fw_csr_iterator_next(&ci, &key, &value))
if (attr->key == key)
return snprintf(buf, buf ? PAGE_SIZE : 0,
"0x%06x\n", value);
return -ENOENT;
}
#define IMMEDIATE_ATTR(name, key) \
{ __ATTR(name, S_IRUGO, show_immediate, NULL), key }
static ssize_t
show_text_leaf(struct device *dev, struct device_attribute *dattr, char *buf)
{
struct config_rom_attribute *attr =
container_of(dattr, struct config_rom_attribute, attr);
struct fw_csr_iterator ci;
u32 *dir, *block = NULL, *p, *end;
int length, key, value, last_key = 0;
char *b;
if (is_fw_unit(dev))
dir = fw_unit(dev)->directory;
else
dir = fw_device(dev)->config_rom + 5;
fw_csr_iterator_init(&ci, dir);
while (fw_csr_iterator_next(&ci, &key, &value)) {
if (attr->key == last_key &&
key == (CSR_DESCRIPTOR | CSR_LEAF))
block = ci.p - 1 + value;
last_key = key;
}
if (block == NULL)
return -ENOENT;
length = min(block[0] >> 16, 256U);
if (length < 3)
return -ENOENT;
if (block[1] != 0 || block[2] != 0)
/* Unknown encoding. */
return -ENOENT;
if (buf == NULL)
return length * 4;
b = buf;
end = &block[length + 1];
for (p = &block[3]; p < end; p++, b += 4)
* (u32 *) b = (__force u32) __cpu_to_be32(*p);
/* Strip trailing whitespace and add newline. */
while (b--, (isspace(*b) || *b == '\0') && b > buf);
strcpy(b + 1, "\n");
return b + 2 - buf;
}
#define TEXT_LEAF_ATTR(name, key) \
{ __ATTR(name, S_IRUGO, show_text_leaf, NULL), key }
static struct config_rom_attribute config_rom_attributes[] = {
IMMEDIATE_ATTR(vendor, CSR_VENDOR),
IMMEDIATE_ATTR(hardware_version, CSR_HARDWARE_VERSION),
IMMEDIATE_ATTR(specifier_id, CSR_SPECIFIER_ID),
IMMEDIATE_ATTR(version, CSR_VERSION),
IMMEDIATE_ATTR(model, CSR_MODEL),
TEXT_LEAF_ATTR(vendor_name, CSR_VENDOR),
TEXT_LEAF_ATTR(model_name, CSR_MODEL),
TEXT_LEAF_ATTR(hardware_version_name, CSR_HARDWARE_VERSION),
};
static void
init_fw_attribute_group(struct device *dev,
struct device_attribute *attrs,
struct fw_attribute_group *group)
{
struct device_attribute *attr;
int i, j;
for (j = 0; attrs[j].attr.name != NULL; j++)
group->attrs[j] = &attrs[j].attr;
for (i = 0; i < ARRAY_SIZE(config_rom_attributes); i++) {
attr = &config_rom_attributes[i].attr;
if (attr->show(dev, attr, NULL) < 0)
continue;
group->attrs[j++] = &attr->attr;
}
BUG_ON(j >= ARRAY_SIZE(group->attrs));
group->attrs[j++] = NULL;
group->groups[0] = &group->group;
group->groups[1] = NULL;
group->group.attrs = group->attrs;
dev->groups = group->groups;
}
static ssize_t
modalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fw_unit *unit = fw_unit(dev);
int length;
length = get_modalias(unit, buf, PAGE_SIZE);
strcpy(buf + length, "\n");
return length + 1;
}
static ssize_t
rom_index_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fw_device *device = fw_device(dev->parent);
struct fw_unit *unit = fw_unit(dev);
return snprintf(buf, PAGE_SIZE, "%d\n",
(int)(unit->directory - device->config_rom));
}
static struct device_attribute fw_unit_attributes[] = {
__ATTR_RO(modalias),
__ATTR_RO(rom_index),
__ATTR_NULL,
};
static ssize_t
config_rom_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct fw_device *device = fw_device(dev);
memcpy(buf, device->config_rom, device->config_rom_length * 4);
return device->config_rom_length * 4;
}
static ssize_t
guid_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct fw_device *device = fw_device(dev);
u64 guid;
guid = ((u64)device->config_rom[3] << 32) | device->config_rom[4];
return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
(unsigned long long)guid);
}
static struct device_attribute fw_device_attributes[] = {
__ATTR_RO(config_rom),
__ATTR_RO(guid),
__ATTR_NULL,
};
struct read_quadlet_callback_data {
struct completion done;
int rcode;
u32 data;
};
static void
complete_transaction(struct fw_card *card, int rcode,
void *payload, size_t length, void *data)
{
struct read_quadlet_callback_data *callback_data = data;
if (rcode == RCODE_COMPLETE)
callback_data->data = be32_to_cpu(*(__be32 *)payload);
callback_data->rcode = rcode;
complete(&callback_data->done);
}
static int
read_rom(struct fw_device *device, int generation, int index, u32 *data)
{
struct read_quadlet_callback_data callback_data;
struct fw_transaction t;
u64 offset;
/* device->node_id, accessed below, must not be older than generation */
smp_rmb();
init_completion(&callback_data.done);
offset = 0xfffff0000400ULL + index * 4;
fw_send_request(device->card, &t, TCODE_READ_QUADLET_REQUEST,
device->node_id, generation, device->max_speed,
offset, NULL, 4, complete_transaction, &callback_data);
wait_for_completion(&callback_data.done);
*data = callback_data.data;
return callback_data.rcode;
}
/*
* Read the bus info block, perform a speed probe, and read all of the rest of
* the config ROM. We do all this with a cached bus generation. If the bus
* generation changes under us, read_bus_info_block will fail and get retried.
* It's better to start all over in this case because the node from which we
* are reading the ROM may have changed the ROM during the reset.
*/
static int read_bus_info_block(struct fw_device *device, int generation)
{
static u32 rom[256];
u32 stack[16], sp, key;
int i, end, length;
device->max_speed = SCODE_100;
/* First read the bus info block. */
for (i = 0; i < 5; i++) {
if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE)
return -1;
/*
* As per IEEE1212 7.2, during power-up, devices can
* reply with a 0 for the first quadlet of the config
* rom to indicate that they are booting (for example,
* if the firmware is on the disk of a external
* harddisk). In that case we just fail, and the
* retry mechanism will try again later.
*/
if (i == 0 && rom[i] == 0)
return -1;
}
device->max_speed = device->node->max_speed;
/*
* Determine the speed of
* - devices with link speed less than PHY speed,
* - devices with 1394b PHY (unless only connected to 1394a PHYs),
* - all devices if there are 1394b repeaters.
* Note, we cannot use the bus info block's link_spd as starting point
* because some buggy firmwares set it lower than necessary and because
* 1394-1995 nodes do not have the field.
*/
if ((rom[2] & 0x7) < device->max_speed ||
device->max_speed == SCODE_BETA ||
device->card->beta_repeaters_present) {
u32 dummy;
/* for S1600 and S3200 */
if (device->max_speed == SCODE_BETA)
device->max_speed = device->card->link_speed;
while (device->max_speed > SCODE_100) {
if (read_rom(device, generation, 0, &dummy) ==
RCODE_COMPLETE)
break;
device->max_speed--;
}
}
/*
* Now parse the config rom. The config rom is a recursive
* directory structure so we parse it using a stack of
* references to the blocks that make up the structure. We
* push a reference to the root directory on the stack to
* start things off.
*/
length = i;
sp = 0;
stack[sp++] = 0xc0000005;
while (sp > 0) {
/*
* Pop the next block reference of the stack. The
* lower 24 bits is the offset into the config rom,
* the upper 8 bits are the type of the reference the
* block.
*/
key = stack[--sp];
i = key & 0xffffff;
if (i >= ARRAY_SIZE(rom))
/*
* The reference points outside the standard
* config rom area, something's fishy.
*/
return -1;
/* Read header quadlet for the block to get the length. */
if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE)
return -1;
end = i + (rom[i] >> 16) + 1;
i++;
if (end > ARRAY_SIZE(rom))
/*
* This block extends outside standard config
* area (and the array we're reading it
* into). That's broken, so ignore this
* device.
*/
return -1;
/*
* Now read in the block. If this is a directory
* block, check the entries as we read them to see if
* it references another block, and push it in that case.
*/
while (i < end) {
if (read_rom(device, generation, i, &rom[i]) !=
RCODE_COMPLETE)
return -1;
if ((key >> 30) == 3 && (rom[i] >> 30) > 1 &&
sp < ARRAY_SIZE(stack))
stack[sp++] = i + rom[i];
i++;
}
if (length < i)
length = i;
}
device->config_rom = kmalloc(length * 4, GFP_KERNEL);
if (device->config_rom == NULL)
return -1;
memcpy(device->config_rom, rom, length * 4);
device->config_rom_length = length;
return 0;
}
static void fw_unit_release(struct device *dev)
{
struct fw_unit *unit = fw_unit(dev);
kfree(unit);
}
static struct device_type fw_unit_type = {
.uevent = fw_unit_uevent,
.release = fw_unit_release,
};
static int is_fw_unit(struct device *dev)
{
return dev->type == &fw_unit_type;
}
static void create_units(struct fw_device *device)
{
struct fw_csr_iterator ci;
struct fw_unit *unit;
int key, value, i;
i = 0;
fw_csr_iterator_init(&ci, &device->config_rom[5]);
while (fw_csr_iterator_next(&ci, &key, &value)) {
if (key != (CSR_UNIT | CSR_DIRECTORY))
continue;
/*
* Get the address of the unit directory and try to
* match the drivers id_tables against it.
*/
unit = kzalloc(sizeof(*unit), GFP_KERNEL);
if (unit == NULL) {
fw_error("failed to allocate memory for unit\n");
continue;
}
unit->directory = ci.p + value - 1;
unit->device.bus = &fw_bus_type;
unit->device.type = &fw_unit_type;
unit->device.parent = &device->device;
snprintf(unit->device.bus_id, sizeof(unit->device.bus_id),
"%s.%d", device->device.bus_id, i++);
init_fw_attribute_group(&unit->device,
fw_unit_attributes,
&unit->attribute_group);
if (device_register(&unit->device) < 0)
goto skip_unit;
continue;
skip_unit:
kfree(unit);
}
}
static int shutdown_unit(struct device *device, void *data)
{
device_unregister(device);
return 0;
}
static DECLARE_RWSEM(idr_rwsem);
static DEFINE_IDR(fw_device_idr);
int fw_cdev_major;
struct fw_device *fw_device_from_devt(dev_t devt)
{
struct fw_device *device;
down_read(&idr_rwsem);
device = idr_find(&fw_device_idr, MINOR(devt));
up_read(&idr_rwsem);
return device;
}
static void fw_device_shutdown(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
int minor = MINOR(device->device.devt);
down_write(&idr_rwsem);
idr_remove(&fw_device_idr, minor);
up_write(&idr_rwsem);
fw_device_cdev_remove(device);
device_for_each_child(&device->device, NULL, shutdown_unit);
device_unregister(&device->device);
}
static struct device_type fw_device_type = {
.release = fw_device_release,
};
/*
* These defines control the retry behavior for reading the config
* rom. It shouldn't be necessary to tweak these; if the device
* doesn't respond to a config rom read within 10 seconds, it's not
* going to respond at all. As for the initial delay, a lot of
* devices will be able to respond within half a second after bus
* reset. On the other hand, it's not really worth being more
* aggressive than that, since it scales pretty well; if 10 devices
* are plugged in, they're all getting read within one second.
*/
#define MAX_RETRIES 10
#define RETRY_DELAY (3 * HZ)
#define INITIAL_DELAY (HZ / 2)
static void fw_device_init(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
int minor, err;
/*
* All failure paths here set node->data to NULL, so that we
* don't try to do device_for_each_child() on a kfree()'d
* device.
*/
if (read_bus_info_block(device, device->generation) < 0) {
if (device->config_rom_retries < MAX_RETRIES) {
device->config_rom_retries++;
schedule_delayed_work(&device->work, RETRY_DELAY);
} else {
fw_notify("giving up on config rom for node id %x\n",
device->node_id);
if (device->node == device->card->root_node)
schedule_delayed_work(&device->card->work, 0);
fw_device_release(&device->device);
}
return;
}
err = -ENOMEM;
down_write(&idr_rwsem);
if (idr_pre_get(&fw_device_idr, GFP_KERNEL))
err = idr_get_new(&fw_device_idr, device, &minor);
up_write(&idr_rwsem);
if (err < 0)
goto error;
device->device.bus = &fw_bus_type;
device->device.type = &fw_device_type;
device->device.parent = device->card->device;
device->device.devt = MKDEV(fw_cdev_major, minor);
snprintf(device->device.bus_id, sizeof(device->device.bus_id),
"fw%d", minor);
init_fw_attribute_group(&device->device,
fw_device_attributes,
&device->attribute_group);
if (device_add(&device->device)) {
fw_error("Failed to add device.\n");
goto error_with_cdev;
}
create_units(device);
/*
* Transition the device to running state. If it got pulled
* out from under us while we did the intialization work, we
* have to shut down the device again here. Normally, though,
* fw_node_event will be responsible for shutting it down when
* necessary. We have to use the atomic cmpxchg here to avoid
* racing with the FW_NODE_DESTROYED case in
* fw_node_event().
*/
if (atomic_cmpxchg(&device->state,
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
fw_device_shutdown(&device->work.work);
else
fw_notify("created new fw device %s "
"(%d config rom retries, S%d00)\n",
device->device.bus_id, device->config_rom_retries,
1 << device->max_speed);
/*
* Reschedule the IRM work if we just finished reading the
* root node config rom. If this races with a bus reset we
* just end up running the IRM work a couple of extra times -
* pretty harmless.
*/
if (device->node == device->card->root_node)
schedule_delayed_work(&device->card->work, 0);
return;
error_with_cdev:
down_write(&idr_rwsem);
idr_remove(&fw_device_idr, minor);
up_write(&idr_rwsem);
error:
put_device(&device->device);
}
static int update_unit(struct device *dev, void *data)
{
struct fw_unit *unit = fw_unit(dev);
struct fw_driver *driver = (struct fw_driver *)dev->driver;
if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) {
down(&dev->sem);
driver->update(unit);
up(&dev->sem);
}
return 0;
}
static void fw_device_update(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
fw_device_cdev_update(device);
device_for_each_child(&device->device, NULL, update_unit);
}
void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
{
struct fw_device *device;
switch (event) {
case FW_NODE_CREATED:
case FW_NODE_LINK_ON:
if (!node->link_on)
break;
device = kzalloc(sizeof(*device), GFP_ATOMIC);
if (device == NULL)
break;
/*
* Do minimal intialization of the device here, the
* rest will happen in fw_device_init(). We need the
* card and node so we can read the config rom and we
* need to do device_initialize() now so
* device_for_each_child() in FW_NODE_UPDATED is
* doesn't freak out.
*/
device_initialize(&device->device);
atomic_set(&device->state, FW_DEVICE_INITIALIZING);
device->card = fw_card_get(card);
device->node = fw_node_get(node);
device->node_id = node->node_id;
device->generation = card->generation;
INIT_LIST_HEAD(&device->client_list);
/*
* Set the node data to point back to this device so
* FW_NODE_UPDATED callbacks can update the node_id
* and generation for the device.
*/
node->data = device;
/*
* Many devices are slow to respond after bus resets,
* especially if they are bus powered and go through
* power-up after getting plugged in. We schedule the
* first config rom scan half a second after bus reset.
*/
INIT_DELAYED_WORK(&device->work, fw_device_init);
schedule_delayed_work(&device->work, INITIAL_DELAY);
break;
case FW_NODE_UPDATED:
if (!node->link_on || node->data == NULL)
break;
device = node->data;
device->node_id = node->node_id;
smp_wmb(); /* update node_id before generation */
device->generation = card->generation;
if (atomic_read(&device->state) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_update);
schedule_delayed_work(&device->work, 0);
}
break;
case FW_NODE_DESTROYED:
case FW_NODE_LINK_OFF:
if (!node->data)
break;
/*
* Destroy the device associated with the node. There
* are two cases here: either the device is fully
* initialized (FW_DEVICE_RUNNING) or we're in the
* process of reading its config rom
* (FW_DEVICE_INITIALIZING). If it is fully
* initialized we can reuse device->work to schedule a
* full fw_device_shutdown(). If not, there's work
* scheduled to read it's config rom, and we just put
* the device in shutdown state to have that code fail
* to create the device.
*/
device = node->data;
if (atomic_xchg(&device->state,
FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
schedule_delayed_work(&device->work, 0);
}
break;
}
}