588baeac38
This patch adds m68knommu support for getting the kernel command line arguments from uboot, including the passing of an initrd image from uboot. We use this on a 5270/5271 based board, and have used it on the 5271evb development board. It is based on a patch found in the linux-2.6-denx git tree, although that tree seems to have had lots of other changes since which are not in the main Linus kernel. I believe this will work on all coldfires, although other m68knommu might be missing the _init_sp stuff in head.S as far as I can tell. I only have the coldfire to test on. Signed-off-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
234 lines
5.8 KiB
ArmAsm
234 lines
5.8 KiB
ArmAsm
/*****************************************************************************/
|
|
|
|
/*
|
|
* head.S -- common startup code for ColdFire CPUs.
|
|
*
|
|
* (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>.
|
|
*/
|
|
|
|
/*****************************************************************************/
|
|
|
|
#include <linux/sys.h>
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfcache.h>
|
|
#include <asm/mcfsim.h>
|
|
|
|
/*****************************************************************************/
|
|
|
|
/*
|
|
* If we don't have a fixed memory size, then lets build in code
|
|
* to auto detect the DRAM size. Obviously this is the prefered
|
|
* method, and should work for most boards. It won't work for those
|
|
* that do not have their RAM starting at address 0, and it only
|
|
* works on SDRAM (not boards fitted with SRAM).
|
|
*/
|
|
#if CONFIG_RAMSIZE != 0
|
|
.macro GET_MEM_SIZE
|
|
movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */
|
|
.endm
|
|
|
|
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
|
|
defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
|
|
defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
|
|
defined(CONFIG_M5407)
|
|
/*
|
|
* Not all these devices have exactly the same DRAM controller,
|
|
* but the DCMR register is virtually identical - give or take
|
|
* a couple of bits. The only exception is the 5272 devices, their
|
|
* DRAM controller is quite different.
|
|
*/
|
|
.macro GET_MEM_SIZE
|
|
movel MCF_MBAR+MCFSIM_DMR0,%d0 /* get mask for 1st bank */
|
|
btst #0,%d0 /* check if region enabled */
|
|
beq 1f
|
|
andl #0xfffc0000,%d0
|
|
beq 1f
|
|
addl #0x00040000,%d0 /* convert mask to size */
|
|
1:
|
|
movel MCF_MBAR+MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
|
|
btst #0,%d1 /* check if region enabled */
|
|
beq 2f
|
|
andl #0xfffc0000, %d1
|
|
beq 2f
|
|
addl #0x00040000,%d1
|
|
addl %d1,%d0 /* total mem size in d0 */
|
|
2:
|
|
.endm
|
|
|
|
#elif defined(CONFIG_M5272)
|
|
.macro GET_MEM_SIZE
|
|
movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
|
|
andil #0xfffff000,%d0 /* mask out chip select options */
|
|
negl %d0 /* negate bits */
|
|
.endm
|
|
|
|
#elif defined(CONFIG_M520x)
|
|
.macro GET_MEM_SIZE
|
|
clrl %d0
|
|
movel MCF_MBAR+MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */
|
|
andl #0x1f, %d2 /* Get only the chip select size */
|
|
beq 3f /* Check if it is enabled */
|
|
addql #1, %d2 /* Form exponent */
|
|
moveql #1, %d0
|
|
lsll %d2, %d0 /* 2 ^ exponent */
|
|
3:
|
|
movel MCF_MBAR+MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */
|
|
andl #0x1f, %d2 /* Get only the chip select size */
|
|
beq 4f /* Check if it is enabled */
|
|
addql #1, %d2 /* Form exponent */
|
|
moveql #1, %d1
|
|
lsll %d2, %d1 /* 2 ^ exponent */
|
|
addl %d1, %d0 /* Total size of SDRAM in d0 */
|
|
4:
|
|
.endm
|
|
|
|
#else
|
|
#error "ERROR: I don't know how to probe your boards memory size?"
|
|
#endif
|
|
|
|
/*****************************************************************************/
|
|
|
|
/*
|
|
* Boards and platforms can do specific early hardware setup if
|
|
* they need to. Most don't need this, define away if not required.
|
|
*/
|
|
#ifndef PLATFORM_SETUP
|
|
#define PLATFORM_SETUP
|
|
#endif
|
|
|
|
/*****************************************************************************/
|
|
|
|
.global _start
|
|
.global _rambase
|
|
.global _ramvec
|
|
.global _ramstart
|
|
.global _ramend
|
|
#if defined(CONFIG_UBOOT)
|
|
.global _init_sp
|
|
#endif
|
|
|
|
/*****************************************************************************/
|
|
|
|
.data
|
|
|
|
/*
|
|
* During startup we store away the RAM setup. These are not in the
|
|
* bss, since their values are determined and written before the bss
|
|
* has been cleared.
|
|
*/
|
|
_rambase:
|
|
.long 0
|
|
_ramvec:
|
|
.long 0
|
|
_ramstart:
|
|
.long 0
|
|
_ramend:
|
|
.long 0
|
|
#if defined(CONFIG_UBOOT)
|
|
_init_sp:
|
|
.long 0
|
|
#endif
|
|
|
|
/*****************************************************************************/
|
|
|
|
__HEAD
|
|
|
|
/*
|
|
* This is the codes first entry point. This is where it all
|
|
* begins...
|
|
*/
|
|
|
|
_start:
|
|
nop /* filler */
|
|
movew #0x2700, %sr /* no interrupts */
|
|
#if defined(CONFIG_UBOOT)
|
|
movel %sp,_init_sp /* save initial stack pointer */
|
|
#endif
|
|
|
|
/*
|
|
* Do any platform or board specific setup now. Most boards
|
|
* don't need anything. Those exceptions are define this in
|
|
* their board specific includes.
|
|
*/
|
|
PLATFORM_SETUP
|
|
|
|
/*
|
|
* Create basic memory configuration. Set VBR accordingly,
|
|
* and size memory.
|
|
*/
|
|
movel #CONFIG_VECTORBASE,%a7
|
|
movec %a7,%VBR /* set vectors addr */
|
|
movel %a7,_ramvec
|
|
|
|
movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */
|
|
movel %a7,_rambase
|
|
|
|
GET_MEM_SIZE /* macro code determines size */
|
|
addl %a7,%d0
|
|
movel %d0,_ramend /* set end ram addr */
|
|
|
|
/*
|
|
* Now that we know what the memory is, lets enable cache
|
|
* and get things moving. This is Coldfire CPU specific.
|
|
*/
|
|
CACHE_ENABLE /* enable CPU cache */
|
|
|
|
|
|
#ifdef CONFIG_ROMFS_FS
|
|
/*
|
|
* Move ROM filesystem above bss :-)
|
|
*/
|
|
lea _sbss,%a0 /* get start of bss */
|
|
lea _ebss,%a1 /* set up destination */
|
|
movel %a0,%a2 /* copy of bss start */
|
|
|
|
movel 8(%a0),%d0 /* get size of ROMFS */
|
|
addql #8,%d0 /* allow for rounding */
|
|
andl #0xfffffffc, %d0 /* whole words */
|
|
|
|
addl %d0,%a0 /* copy from end */
|
|
addl %d0,%a1 /* copy from end */
|
|
movel %a1,_ramstart /* set start of ram */
|
|
|
|
_copy_romfs:
|
|
movel -(%a0),%d0 /* copy dword */
|
|
movel %d0,-(%a1)
|
|
cmpl %a0,%a2 /* check if at end */
|
|
bne _copy_romfs
|
|
|
|
#else /* CONFIG_ROMFS_FS */
|
|
lea _ebss,%a1
|
|
movel %a1,_ramstart
|
|
#endif /* CONFIG_ROMFS_FS */
|
|
|
|
|
|
/*
|
|
* Zero out the bss region.
|
|
*/
|
|
lea _sbss,%a0 /* get start of bss */
|
|
lea _ebss,%a1 /* get end of bss */
|
|
clrl %d0 /* set value */
|
|
_clear_bss:
|
|
movel %d0,(%a0)+ /* clear each word */
|
|
cmpl %a0,%a1 /* check if at end */
|
|
bne _clear_bss
|
|
|
|
/*
|
|
* Load the current task pointer and stack.
|
|
*/
|
|
lea init_thread_union,%a0
|
|
lea THREAD_SIZE(%a0),%sp
|
|
|
|
/*
|
|
* Assember start up done, start code proper.
|
|
*/
|
|
jsr start_kernel /* start Linux kernel */
|
|
|
|
_exit:
|
|
jmp _exit /* should never get here */
|
|
|
|
/*****************************************************************************/
|