![Emese Revfy](/assets/img/avatar_default.png)
Signed-off-by: Emese Revfy <re.emese@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
644 lines
16 KiB
C
644 lines
16 KiB
C
/*
|
|
* LCD/Backlight Driver for Sharp Zaurus Handhelds (various models)
|
|
*
|
|
* Copyright (c) 2004-2006 Richard Purdie
|
|
*
|
|
* Based on Sharp's 2.4 Backlight Driver
|
|
*
|
|
* Copyright (c) 2008 Marvell International Ltd.
|
|
* Converted to SPI device based LCD/Backlight device driver
|
|
* by Eric Miao <eric.miao@marvell.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/lcd.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/corgi_lcd.h>
|
|
#include <asm/mach/sharpsl_param.h>
|
|
|
|
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
|
|
|
|
/* Register Addresses */
|
|
#define RESCTL_ADRS 0x00
|
|
#define PHACTRL_ADRS 0x01
|
|
#define DUTYCTRL_ADRS 0x02
|
|
#define POWERREG0_ADRS 0x03
|
|
#define POWERREG1_ADRS 0x04
|
|
#define GPOR3_ADRS 0x05
|
|
#define PICTRL_ADRS 0x06
|
|
#define POLCTRL_ADRS 0x07
|
|
|
|
/* Register Bit Definitions */
|
|
#define RESCTL_QVGA 0x01
|
|
#define RESCTL_VGA 0x00
|
|
|
|
#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
|
|
#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
|
|
#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
|
|
|
|
#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
|
|
#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
|
|
#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
|
|
|
|
#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
|
|
#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
|
|
#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
|
|
#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
|
|
#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
|
|
|
|
#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
|
|
#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
|
|
#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
|
|
|
|
#define PICTRL_INIT_STATE 0x01
|
|
#define PICTRL_INIOFF 0x02
|
|
#define PICTRL_POWER_DOWN 0x04
|
|
#define PICTRL_COM_SIGNAL_OFF 0x08
|
|
#define PICTRL_DAC_SIGNAL_OFF 0x10
|
|
|
|
#define POLCTRL_SYNC_POL_FALL 0x01
|
|
#define POLCTRL_EN_POL_FALL 0x02
|
|
#define POLCTRL_DATA_POL_FALL 0x04
|
|
#define POLCTRL_SYNC_ACT_H 0x08
|
|
#define POLCTRL_EN_ACT_L 0x10
|
|
|
|
#define POLCTRL_SYNC_POL_RISE 0x00
|
|
#define POLCTRL_EN_POL_RISE 0x00
|
|
#define POLCTRL_DATA_POL_RISE 0x00
|
|
#define POLCTRL_SYNC_ACT_L 0x00
|
|
#define POLCTRL_EN_ACT_H 0x00
|
|
|
|
#define PHACTRL_PHASE_MANUAL 0x01
|
|
#define DEFAULT_PHAD_QVGA (9)
|
|
#define DEFAULT_COMADJ (125)
|
|
|
|
struct corgi_lcd {
|
|
struct spi_device *spi_dev;
|
|
struct lcd_device *lcd_dev;
|
|
struct backlight_device *bl_dev;
|
|
|
|
int limit_mask;
|
|
int intensity;
|
|
int power;
|
|
int mode;
|
|
char buf[2];
|
|
|
|
int gpio_backlight_on;
|
|
int gpio_backlight_cont;
|
|
int gpio_backlight_cont_inverted;
|
|
|
|
void (*kick_battery)(void);
|
|
};
|
|
|
|
static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int reg, uint8_t val);
|
|
|
|
static struct corgi_lcd *the_corgi_lcd;
|
|
static unsigned long corgibl_flags;
|
|
#define CORGIBL_SUSPENDED 0x01
|
|
#define CORGIBL_BATTLOW 0x02
|
|
|
|
/*
|
|
* This is only a psuedo I2C interface. We can't use the standard kernel
|
|
* routines as the interface is write only. We just assume the data is acked...
|
|
*/
|
|
static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data)
|
|
{
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, data);
|
|
udelay(10);
|
|
}
|
|
|
|
static void lcdtg_i2c_send_bit(struct corgi_lcd *lcd, uint8_t data)
|
|
{
|
|
lcdtg_ssp_i2c_send(lcd, data);
|
|
lcdtg_ssp_i2c_send(lcd, data | POWER0_COM_DCLK);
|
|
lcdtg_ssp_i2c_send(lcd, data);
|
|
}
|
|
|
|
static void lcdtg_i2c_send_start(struct corgi_lcd *lcd, uint8_t base)
|
|
{
|
|
lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
|
|
lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
|
|
lcdtg_ssp_i2c_send(lcd, base);
|
|
}
|
|
|
|
static void lcdtg_i2c_send_stop(struct corgi_lcd *lcd, uint8_t base)
|
|
{
|
|
lcdtg_ssp_i2c_send(lcd, base);
|
|
lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
|
|
lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
|
|
}
|
|
|
|
static void lcdtg_i2c_send_byte(struct corgi_lcd *lcd,
|
|
uint8_t base, uint8_t data)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 8; i++) {
|
|
if (data & 0x80)
|
|
lcdtg_i2c_send_bit(lcd, base | POWER0_COM_DOUT);
|
|
else
|
|
lcdtg_i2c_send_bit(lcd, base);
|
|
data <<= 1;
|
|
}
|
|
}
|
|
|
|
static void lcdtg_i2c_wait_ack(struct corgi_lcd *lcd, uint8_t base)
|
|
{
|
|
lcdtg_i2c_send_bit(lcd, base);
|
|
}
|
|
|
|
static void lcdtg_set_common_voltage(struct corgi_lcd *lcd,
|
|
uint8_t base_data, uint8_t data)
|
|
{
|
|
/* Set Common Voltage to M62332FP via I2C */
|
|
lcdtg_i2c_send_start(lcd, base_data);
|
|
lcdtg_i2c_send_byte(lcd, base_data, 0x9c);
|
|
lcdtg_i2c_wait_ack(lcd, base_data);
|
|
lcdtg_i2c_send_byte(lcd, base_data, 0x00);
|
|
lcdtg_i2c_wait_ack(lcd, base_data);
|
|
lcdtg_i2c_send_byte(lcd, base_data, data);
|
|
lcdtg_i2c_wait_ack(lcd, base_data);
|
|
lcdtg_i2c_send_stop(lcd, base_data);
|
|
}
|
|
|
|
static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int adrs, uint8_t data)
|
|
{
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer = {
|
|
.len = 1,
|
|
.cs_change = 1,
|
|
.tx_buf = lcd->buf,
|
|
};
|
|
|
|
lcd->buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f);
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
return spi_sync(lcd->spi_dev, &msg);
|
|
}
|
|
|
|
/* Set Phase Adjust */
|
|
static void lcdtg_set_phadadj(struct corgi_lcd *lcd, int mode)
|
|
{
|
|
int adj;
|
|
|
|
switch(mode) {
|
|
case CORGI_LCD_MODE_VGA:
|
|
/* Setting for VGA */
|
|
adj = sharpsl_param.phadadj;
|
|
adj = (adj < 0) ? PHACTRL_PHASE_MANUAL :
|
|
PHACTRL_PHASE_MANUAL | ((adj & 0xf) << 1);
|
|
break;
|
|
case CORGI_LCD_MODE_QVGA:
|
|
default:
|
|
/* Setting for QVGA */
|
|
adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
|
|
break;
|
|
}
|
|
|
|
corgi_ssp_lcdtg_send(lcd, PHACTRL_ADRS, adj);
|
|
}
|
|
|
|
static void corgi_lcd_power_on(struct corgi_lcd *lcd)
|
|
{
|
|
int comadj;
|
|
|
|
/* Initialize Internal Logic & Port */
|
|
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
|
|
PICTRL_POWER_DOWN | PICTRL_INIOFF |
|
|
PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF |
|
|
PICTRL_DAC_SIGNAL_OFF);
|
|
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
|
POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF |
|
|
POWER0_COM_OFF | POWER0_VCC5_OFF);
|
|
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
|
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
|
|
|
|
/* VDD(+8V), SVSS(-4V) ON */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
|
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
|
|
mdelay(3);
|
|
|
|
/* DAC ON */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
|
POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
|
|
POWER0_COM_OFF | POWER0_VCC5_OFF);
|
|
|
|
/* INIB = H, INI = L */
|
|
/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
|
|
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
|
|
PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
|
|
|
|
/* Set Common Voltage */
|
|
comadj = sharpsl_param.comadj;
|
|
if (comadj < 0)
|
|
comadj = DEFAULT_COMADJ;
|
|
|
|
lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
|
|
POWER0_VCC5_OFF, comadj);
|
|
|
|
/* VCC5 ON, DAC ON */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
|
POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
|
|
POWER0_COM_OFF | POWER0_VCC5_ON);
|
|
|
|
/* GVSS(-8V) ON, VDD ON */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
|
POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
|
|
mdelay(2);
|
|
|
|
/* COM SIGNAL ON (PICTL[3] = L) */
|
|
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_INIT_STATE);
|
|
|
|
/* COM ON, DAC ON, VCC5_ON */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
|
POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
|
|
POWER0_COM_ON | POWER0_VCC5_ON);
|
|
|
|
/* VW ON, GVSS ON, VDD ON */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
|
POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
|
|
|
|
/* Signals output enable */
|
|
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, 0);
|
|
|
|
/* Set Phase Adjust */
|
|
lcdtg_set_phadadj(lcd, lcd->mode);
|
|
|
|
/* Initialize for Input Signals from ATI */
|
|
corgi_ssp_lcdtg_send(lcd, POLCTRL_ADRS,
|
|
POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE |
|
|
POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L |
|
|
POLCTRL_EN_ACT_H);
|
|
udelay(1000);
|
|
|
|
switch (lcd->mode) {
|
|
case CORGI_LCD_MODE_VGA:
|
|
corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
|
|
break;
|
|
case CORGI_LCD_MODE_QVGA:
|
|
default:
|
|
corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void corgi_lcd_power_off(struct corgi_lcd *lcd)
|
|
{
|
|
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
|
|
msleep(34);
|
|
|
|
/* (1)VW OFF */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
|
POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
|
|
|
|
/* (2)COM OFF */
|
|
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
|
POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
|
|
|
|
/* (3)Set Common Voltage Bias 0V */
|
|
lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
|
|
POWER0_VCC5_ON, 0);
|
|
|
|
/* (4)GVSS OFF */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
|
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
|
|
|
|
/* (5)VCC5 OFF */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
|
POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
|
|
|
|
/* (6)Set PDWN, INIOFF, DACOFF */
|
|
corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
|
|
PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
|
|
PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
|
|
|
|
/* (7)DAC OFF */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
|
|
POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
|
|
|
|
/* (8)VDD OFF */
|
|
corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
|
|
POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
|
|
}
|
|
|
|
static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
|
|
{
|
|
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
|
|
int mode = CORGI_LCD_MODE_QVGA;
|
|
|
|
if (m->xres == 640 || m->xres == 480)
|
|
mode = CORGI_LCD_MODE_VGA;
|
|
|
|
if (lcd->mode == mode)
|
|
return 0;
|
|
|
|
lcdtg_set_phadadj(lcd, mode);
|
|
|
|
switch (mode) {
|
|
case CORGI_LCD_MODE_VGA:
|
|
corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
|
|
break;
|
|
case CORGI_LCD_MODE_QVGA:
|
|
default:
|
|
corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
|
|
break;
|
|
}
|
|
|
|
lcd->mode = mode;
|
|
return 0;
|
|
}
|
|
|
|
static int corgi_lcd_set_power(struct lcd_device *ld, int power)
|
|
{
|
|
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
|
|
|
|
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
|
|
corgi_lcd_power_on(lcd);
|
|
|
|
if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
|
|
corgi_lcd_power_off(lcd);
|
|
|
|
lcd->power = power;
|
|
return 0;
|
|
}
|
|
|
|
static int corgi_lcd_get_power(struct lcd_device *ld)
|
|
{
|
|
struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
|
|
|
|
return lcd->power;
|
|
}
|
|
|
|
static struct lcd_ops corgi_lcd_ops = {
|
|
.get_power = corgi_lcd_get_power,
|
|
.set_power = corgi_lcd_set_power,
|
|
.set_mode = corgi_lcd_set_mode,
|
|
};
|
|
|
|
static int corgi_bl_get_intensity(struct backlight_device *bd)
|
|
{
|
|
struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
|
|
|
|
return lcd->intensity;
|
|
}
|
|
|
|
static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
|
|
{
|
|
int cont;
|
|
|
|
if (intensity > 0x10)
|
|
intensity += 0x10;
|
|
|
|
corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity);
|
|
|
|
/* Bit 5 via GPIO_BACKLIGHT_CONT */
|
|
cont = !!(intensity & 0x20) ^ lcd->gpio_backlight_cont_inverted;
|
|
|
|
if (gpio_is_valid(lcd->gpio_backlight_cont))
|
|
gpio_set_value(lcd->gpio_backlight_cont, cont);
|
|
|
|
if (gpio_is_valid(lcd->gpio_backlight_on))
|
|
gpio_set_value(lcd->gpio_backlight_on, intensity);
|
|
|
|
if (lcd->kick_battery)
|
|
lcd->kick_battery();
|
|
|
|
lcd->intensity = intensity;
|
|
return 0;
|
|
}
|
|
|
|
static int corgi_bl_update_status(struct backlight_device *bd)
|
|
{
|
|
struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
|
|
int intensity = bd->props.brightness;
|
|
|
|
if (bd->props.power != FB_BLANK_UNBLANK)
|
|
intensity = 0;
|
|
|
|
if (bd->props.fb_blank != FB_BLANK_UNBLANK)
|
|
intensity = 0;
|
|
|
|
if (corgibl_flags & CORGIBL_SUSPENDED)
|
|
intensity = 0;
|
|
|
|
if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask)
|
|
intensity = lcd->limit_mask;
|
|
|
|
return corgi_bl_set_intensity(lcd, intensity);
|
|
}
|
|
|
|
void corgi_lcd_limit_intensity(int limit)
|
|
{
|
|
if (limit)
|
|
corgibl_flags |= CORGIBL_BATTLOW;
|
|
else
|
|
corgibl_flags &= ~CORGIBL_BATTLOW;
|
|
|
|
backlight_update_status(the_corgi_lcd->bl_dev);
|
|
}
|
|
EXPORT_SYMBOL(corgi_lcd_limit_intensity);
|
|
|
|
static const struct backlight_ops corgi_bl_ops = {
|
|
.get_brightness = corgi_bl_get_intensity,
|
|
.update_status = corgi_bl_update_status,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int corgi_lcd_suspend(struct spi_device *spi, pm_message_t state)
|
|
{
|
|
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
|
|
|
|
corgibl_flags |= CORGIBL_SUSPENDED;
|
|
corgi_bl_set_intensity(lcd, 0);
|
|
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
|
|
return 0;
|
|
}
|
|
|
|
static int corgi_lcd_resume(struct spi_device *spi)
|
|
{
|
|
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
|
|
|
|
corgibl_flags &= ~CORGIBL_SUSPENDED;
|
|
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
|
|
backlight_update_status(lcd->bl_dev);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define corgi_lcd_suspend NULL
|
|
#define corgi_lcd_resume NULL
|
|
#endif
|
|
|
|
static int setup_gpio_backlight(struct corgi_lcd *lcd,
|
|
struct corgi_lcd_platform_data *pdata)
|
|
{
|
|
struct spi_device *spi = lcd->spi_dev;
|
|
int err;
|
|
|
|
lcd->gpio_backlight_on = -1;
|
|
lcd->gpio_backlight_cont = -1;
|
|
|
|
if (gpio_is_valid(pdata->gpio_backlight_on)) {
|
|
err = gpio_request(pdata->gpio_backlight_on, "BL_ON");
|
|
if (err) {
|
|
dev_err(&spi->dev, "failed to request GPIO%d for "
|
|
"backlight_on\n", pdata->gpio_backlight_on);
|
|
return err;
|
|
}
|
|
|
|
lcd->gpio_backlight_on = pdata->gpio_backlight_on;
|
|
gpio_direction_output(lcd->gpio_backlight_on, 0);
|
|
}
|
|
|
|
if (gpio_is_valid(pdata->gpio_backlight_cont)) {
|
|
err = gpio_request(pdata->gpio_backlight_cont, "BL_CONT");
|
|
if (err) {
|
|
dev_err(&spi->dev, "failed to request GPIO%d for "
|
|
"backlight_cont\n", pdata->gpio_backlight_cont);
|
|
goto err_free_backlight_on;
|
|
}
|
|
|
|
lcd->gpio_backlight_cont = pdata->gpio_backlight_cont;
|
|
|
|
/* spitz and akita use both GPIOs for backlight, and
|
|
* have inverted polarity of GPIO_BACKLIGHT_CONT
|
|
*/
|
|
if (gpio_is_valid(lcd->gpio_backlight_on)) {
|
|
lcd->gpio_backlight_cont_inverted = 1;
|
|
gpio_direction_output(lcd->gpio_backlight_cont, 1);
|
|
} else {
|
|
lcd->gpio_backlight_cont_inverted = 0;
|
|
gpio_direction_output(lcd->gpio_backlight_cont, 0);
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
err_free_backlight_on:
|
|
if (gpio_is_valid(lcd->gpio_backlight_on))
|
|
gpio_free(lcd->gpio_backlight_on);
|
|
return err;
|
|
}
|
|
|
|
static int __devinit corgi_lcd_probe(struct spi_device *spi)
|
|
{
|
|
struct corgi_lcd_platform_data *pdata = spi->dev.platform_data;
|
|
struct corgi_lcd *lcd;
|
|
int ret = 0;
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&spi->dev, "platform data not available\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lcd = kzalloc(sizeof(struct corgi_lcd), GFP_KERNEL);
|
|
if (!lcd) {
|
|
dev_err(&spi->dev, "failed to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
lcd->spi_dev = spi;
|
|
|
|
lcd->lcd_dev = lcd_device_register("corgi_lcd", &spi->dev,
|
|
lcd, &corgi_lcd_ops);
|
|
if (IS_ERR(lcd->lcd_dev)) {
|
|
ret = PTR_ERR(lcd->lcd_dev);
|
|
goto err_free_lcd;
|
|
}
|
|
lcd->power = FB_BLANK_POWERDOWN;
|
|
lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA;
|
|
|
|
lcd->bl_dev = backlight_device_register("corgi_bl", &spi->dev,
|
|
lcd, &corgi_bl_ops);
|
|
if (IS_ERR(lcd->bl_dev)) {
|
|
ret = PTR_ERR(lcd->bl_dev);
|
|
goto err_unregister_lcd;
|
|
}
|
|
lcd->bl_dev->props.max_brightness = pdata->max_intensity;
|
|
lcd->bl_dev->props.brightness = pdata->default_intensity;
|
|
lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
|
|
|
|
ret = setup_gpio_backlight(lcd, pdata);
|
|
if (ret)
|
|
goto err_unregister_bl;
|
|
|
|
lcd->kick_battery = pdata->kick_battery;
|
|
|
|
dev_set_drvdata(&spi->dev, lcd);
|
|
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
|
|
backlight_update_status(lcd->bl_dev);
|
|
|
|
lcd->limit_mask = pdata->limit_mask;
|
|
the_corgi_lcd = lcd;
|
|
return 0;
|
|
|
|
err_unregister_bl:
|
|
backlight_device_unregister(lcd->bl_dev);
|
|
err_unregister_lcd:
|
|
lcd_device_unregister(lcd->lcd_dev);
|
|
err_free_lcd:
|
|
kfree(lcd);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit corgi_lcd_remove(struct spi_device *spi)
|
|
{
|
|
struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
|
|
|
|
lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
|
|
lcd->bl_dev->props.brightness = 0;
|
|
backlight_update_status(lcd->bl_dev);
|
|
backlight_device_unregister(lcd->bl_dev);
|
|
|
|
if (gpio_is_valid(lcd->gpio_backlight_on))
|
|
gpio_free(lcd->gpio_backlight_on);
|
|
|
|
if (gpio_is_valid(lcd->gpio_backlight_cont))
|
|
gpio_free(lcd->gpio_backlight_cont);
|
|
|
|
corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
|
|
lcd_device_unregister(lcd->lcd_dev);
|
|
kfree(lcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver corgi_lcd_driver = {
|
|
.driver = {
|
|
.name = "corgi-lcd",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = corgi_lcd_probe,
|
|
.remove = __devexit_p(corgi_lcd_remove),
|
|
.suspend = corgi_lcd_suspend,
|
|
.resume = corgi_lcd_resume,
|
|
};
|
|
|
|
static int __init corgi_lcd_init(void)
|
|
{
|
|
return spi_register_driver(&corgi_lcd_driver);
|
|
}
|
|
module_init(corgi_lcd_init);
|
|
|
|
static void __exit corgi_lcd_exit(void)
|
|
{
|
|
spi_unregister_driver(&corgi_lcd_driver);
|
|
}
|
|
module_exit(corgi_lcd_exit);
|
|
|
|
MODULE_DESCRIPTION("LCD and backlight driver for SHARP C7x0/Cxx00");
|
|
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("spi:corgi-lcd");
|