![Linus Torvalds](/assets/img/avatar_default.png)
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits) USB: qcserial: add device id for HP devices USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c USB: allow malformed LANGID descriptors USB: pxa27x_udc: typo fixes and code cleanups USB: gadget: gadget zero uses new suspend/resume hooks USB: gadget: composite device-level suspend/resume hooks USB: r8a66597-hcd: suspend/resume support USB: more u32 conversion after transfer_buffer_length and actual_length USB: Fix cp2101 USB serial device driver termios functions for console use USB: CP2101 New Device ID USB: ipaq: handle 4 endpoint devices USB: S3C: Move usb-control.h to platform include USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue USB: pedantic: spelling correction in comment for ch9.h USB: host: fix sparse warning: Using plain integer as NULL pointer USB: ohci-s3c2410: fix name of bus clock USB: ohci-s3c2410: remove <mach/hardware.h> include USB: serial: rename cp2101 driver to cp210x USB: CP2101 Reduce Error Logging USB: CP2101 Support AN205 baud rates ...
1242 lines
32 KiB
C
1242 lines
32 KiB
C
/*
|
|
* OHCI HCD (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
|
|
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
|
|
*
|
|
* [ Initialisation is based on Linus' ]
|
|
* [ uhci code and gregs ohci fragments ]
|
|
* [ (C) Copyright 1999 Linus Torvalds ]
|
|
* [ (C) Copyright 1999 Gregory P. Smith]
|
|
*
|
|
*
|
|
* OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
|
|
* interfaces (though some non-x86 Intel chips use it). It supports
|
|
* smarter hardware than UHCI. A download link for the spec available
|
|
* through the http://www.usb.org website.
|
|
*
|
|
* This file is licenced under the GPL.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/list.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/debugfs.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/unaligned.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include "../core/hcd.h"
|
|
|
|
#define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
|
|
#define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
|
|
|
|
/* For initializing controller (mask in an HCFS mode too) */
|
|
#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
|
|
#define OHCI_INTR_INIT \
|
|
(OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
|
|
| OHCI_INTR_RD | OHCI_INTR_WDH)
|
|
|
|
#ifdef __hppa__
|
|
/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
|
|
#define IR_DISABLE
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP
|
|
/* OMAP doesn't support IR (no SMM; not needed) */
|
|
#define IR_DISABLE
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static const char hcd_name [] = "ohci_hcd";
|
|
|
|
#define STATECHANGE_DELAY msecs_to_jiffies(300)
|
|
|
|
#include "ohci.h"
|
|
|
|
static void ohci_dump (struct ohci_hcd *ohci, int verbose);
|
|
static int ohci_init (struct ohci_hcd *ohci);
|
|
static void ohci_stop (struct usb_hcd *hcd);
|
|
|
|
#if defined(CONFIG_PM) || defined(CONFIG_PCI)
|
|
static int ohci_restart (struct ohci_hcd *ohci);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
static void quirk_amd_pll(int state);
|
|
static void amd_iso_dev_put(void);
|
|
#else
|
|
static inline void quirk_amd_pll(int state)
|
|
{
|
|
return;
|
|
}
|
|
static inline void amd_iso_dev_put(void)
|
|
{
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
|
|
#include "ohci-hub.c"
|
|
#include "ohci-dbg.c"
|
|
#include "ohci-mem.c"
|
|
#include "ohci-q.c"
|
|
|
|
|
|
/*
|
|
* On architectures with edge-triggered interrupts we must never return
|
|
* IRQ_NONE.
|
|
*/
|
|
#if defined(CONFIG_SA1111) /* ... or other edge-triggered systems */
|
|
#define IRQ_NOTMINE IRQ_HANDLED
|
|
#else
|
|
#define IRQ_NOTMINE IRQ_NONE
|
|
#endif
|
|
|
|
|
|
/* Some boards misreport power switching/overcurrent */
|
|
static int distrust_firmware = 1;
|
|
module_param (distrust_firmware, bool, 0);
|
|
MODULE_PARM_DESC (distrust_firmware,
|
|
"true to distrust firmware power/overcurrent setup");
|
|
|
|
/* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
|
|
static int no_handshake = 0;
|
|
module_param (no_handshake, bool, 0);
|
|
MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* queue up an urb for anything except the root hub
|
|
*/
|
|
static int ohci_urb_enqueue (
|
|
struct usb_hcd *hcd,
|
|
struct urb *urb,
|
|
gfp_t mem_flags
|
|
) {
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
struct ed *ed;
|
|
urb_priv_t *urb_priv;
|
|
unsigned int pipe = urb->pipe;
|
|
int i, size = 0;
|
|
unsigned long flags;
|
|
int retval = 0;
|
|
|
|
#ifdef OHCI_VERBOSE_DEBUG
|
|
urb_print(urb, "SUB", usb_pipein(pipe), -EINPROGRESS);
|
|
#endif
|
|
|
|
/* every endpoint has a ed, locate and maybe (re)initialize it */
|
|
if (! (ed = ed_get (ohci, urb->ep, urb->dev, pipe, urb->interval)))
|
|
return -ENOMEM;
|
|
|
|
/* for the private part of the URB we need the number of TDs (size) */
|
|
switch (ed->type) {
|
|
case PIPE_CONTROL:
|
|
/* td_submit_urb() doesn't yet handle these */
|
|
if (urb->transfer_buffer_length > 4096)
|
|
return -EMSGSIZE;
|
|
|
|
/* 1 TD for setup, 1 for ACK, plus ... */
|
|
size = 2;
|
|
/* FALLTHROUGH */
|
|
// case PIPE_INTERRUPT:
|
|
// case PIPE_BULK:
|
|
default:
|
|
/* one TD for every 4096 Bytes (can be upto 8K) */
|
|
size += urb->transfer_buffer_length / 4096;
|
|
/* ... and for any remaining bytes ... */
|
|
if ((urb->transfer_buffer_length % 4096) != 0)
|
|
size++;
|
|
/* ... and maybe a zero length packet to wrap it up */
|
|
if (size == 0)
|
|
size++;
|
|
else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
|
|
&& (urb->transfer_buffer_length
|
|
% usb_maxpacket (urb->dev, pipe,
|
|
usb_pipeout (pipe))) == 0)
|
|
size++;
|
|
break;
|
|
case PIPE_ISOCHRONOUS: /* number of packets from URB */
|
|
size = urb->number_of_packets;
|
|
break;
|
|
}
|
|
|
|
/* allocate the private part of the URB */
|
|
urb_priv = kzalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
|
|
mem_flags);
|
|
if (!urb_priv)
|
|
return -ENOMEM;
|
|
INIT_LIST_HEAD (&urb_priv->pending);
|
|
urb_priv->length = size;
|
|
urb_priv->ed = ed;
|
|
|
|
/* allocate the TDs (deferring hash chain updates) */
|
|
for (i = 0; i < size; i++) {
|
|
urb_priv->td [i] = td_alloc (ohci, mem_flags);
|
|
if (!urb_priv->td [i]) {
|
|
urb_priv->length = i;
|
|
urb_free_priv (ohci, urb_priv);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave (&ohci->lock, flags);
|
|
|
|
/* don't submit to a dead HC */
|
|
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
|
|
retval = -ENODEV;
|
|
goto fail;
|
|
}
|
|
if (!HC_IS_RUNNING(hcd->state)) {
|
|
retval = -ENODEV;
|
|
goto fail;
|
|
}
|
|
retval = usb_hcd_link_urb_to_ep(hcd, urb);
|
|
if (retval)
|
|
goto fail;
|
|
|
|
/* schedule the ed if needed */
|
|
if (ed->state == ED_IDLE) {
|
|
retval = ed_schedule (ohci, ed);
|
|
if (retval < 0) {
|
|
usb_hcd_unlink_urb_from_ep(hcd, urb);
|
|
goto fail;
|
|
}
|
|
if (ed->type == PIPE_ISOCHRONOUS) {
|
|
u16 frame = ohci_frame_no(ohci);
|
|
|
|
/* delay a few frames before the first TD */
|
|
frame += max_t (u16, 8, ed->interval);
|
|
frame &= ~(ed->interval - 1);
|
|
frame |= ed->branch;
|
|
urb->start_frame = frame;
|
|
|
|
/* yes, only URB_ISO_ASAP is supported, and
|
|
* urb->start_frame is never used as input.
|
|
*/
|
|
}
|
|
} else if (ed->type == PIPE_ISOCHRONOUS)
|
|
urb->start_frame = ed->last_iso + ed->interval;
|
|
|
|
/* fill the TDs and link them to the ed; and
|
|
* enable that part of the schedule, if needed
|
|
* and update count of queued periodic urbs
|
|
*/
|
|
urb->hcpriv = urb_priv;
|
|
td_submit_urb (ohci, urb);
|
|
|
|
fail:
|
|
if (retval)
|
|
urb_free_priv (ohci, urb_priv);
|
|
spin_unlock_irqrestore (&ohci->lock, flags);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* decouple the URB from the HC queues (TDs, urb_priv).
|
|
* reporting is always done
|
|
* asynchronously, and we might be dealing with an urb that's
|
|
* partially transferred, or an ED with other urbs being unlinked.
|
|
*/
|
|
static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
#ifdef OHCI_VERBOSE_DEBUG
|
|
urb_print(urb, "UNLINK", 1, status);
|
|
#endif
|
|
|
|
spin_lock_irqsave (&ohci->lock, flags);
|
|
rc = usb_hcd_check_unlink_urb(hcd, urb, status);
|
|
if (rc) {
|
|
; /* Do nothing */
|
|
} else if (HC_IS_RUNNING(hcd->state)) {
|
|
urb_priv_t *urb_priv;
|
|
|
|
/* Unless an IRQ completed the unlink while it was being
|
|
* handed to us, flag it for unlink and giveback, and force
|
|
* some upcoming INTR_SF to call finish_unlinks()
|
|
*/
|
|
urb_priv = urb->hcpriv;
|
|
if (urb_priv) {
|
|
if (urb_priv->ed->state == ED_OPER)
|
|
start_ed_unlink (ohci, urb_priv->ed);
|
|
}
|
|
} else {
|
|
/*
|
|
* with HC dead, we won't respect hc queue pointers
|
|
* any more ... just clean up every urb's memory.
|
|
*/
|
|
if (urb->hcpriv)
|
|
finish_urb(ohci, urb, status);
|
|
}
|
|
spin_unlock_irqrestore (&ohci->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* frees config/altsetting state for endpoints,
|
|
* including ED memory, dummy TD, and bulk/intr data toggle
|
|
*/
|
|
|
|
static void
|
|
ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
unsigned long flags;
|
|
struct ed *ed = ep->hcpriv;
|
|
unsigned limit = 1000;
|
|
|
|
/* ASSERT: any requests/urbs are being unlinked */
|
|
/* ASSERT: nobody can be submitting urbs for this any more */
|
|
|
|
if (!ed)
|
|
return;
|
|
|
|
rescan:
|
|
spin_lock_irqsave (&ohci->lock, flags);
|
|
|
|
if (!HC_IS_RUNNING (hcd->state)) {
|
|
sanitize:
|
|
ed->state = ED_IDLE;
|
|
if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
|
|
ohci->eds_scheduled--;
|
|
finish_unlinks (ohci, 0);
|
|
}
|
|
|
|
switch (ed->state) {
|
|
case ED_UNLINK: /* wait for hw to finish? */
|
|
/* major IRQ delivery trouble loses INTR_SF too... */
|
|
if (limit-- == 0) {
|
|
ohci_warn(ohci, "ED unlink timeout\n");
|
|
if (quirk_zfmicro(ohci)) {
|
|
ohci_warn(ohci, "Attempting ZF TD recovery\n");
|
|
ohci->ed_to_check = ed;
|
|
ohci->zf_delay = 2;
|
|
}
|
|
goto sanitize;
|
|
}
|
|
spin_unlock_irqrestore (&ohci->lock, flags);
|
|
schedule_timeout_uninterruptible(1);
|
|
goto rescan;
|
|
case ED_IDLE: /* fully unlinked */
|
|
if (list_empty (&ed->td_list)) {
|
|
td_free (ohci, ed->dummy);
|
|
ed_free (ohci, ed);
|
|
break;
|
|
}
|
|
/* else FALL THROUGH */
|
|
default:
|
|
/* caller was supposed to have unlinked any requests;
|
|
* that's not our job. can't recover; must leak ed.
|
|
*/
|
|
ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
|
|
ed, ep->desc.bEndpointAddress, ed->state,
|
|
list_empty (&ed->td_list) ? "" : " (has tds)");
|
|
td_free (ohci, ed->dummy);
|
|
break;
|
|
}
|
|
ep->hcpriv = NULL;
|
|
spin_unlock_irqrestore (&ohci->lock, flags);
|
|
return;
|
|
}
|
|
|
|
static int ohci_get_frame (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
return ohci_frame_no(ohci);
|
|
}
|
|
|
|
static void ohci_usb_reset (struct ohci_hcd *ohci)
|
|
{
|
|
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
|
|
ohci->hc_control &= OHCI_CTRL_RWC;
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
}
|
|
|
|
/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
|
|
* other cases where the next software may expect clean state from the
|
|
* "firmware". this is bus-neutral, unlike shutdown() methods.
|
|
*/
|
|
static void
|
|
ohci_shutdown (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci;
|
|
|
|
ohci = hcd_to_ohci (hcd);
|
|
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
|
|
ohci_usb_reset (ohci);
|
|
/* flush the writes */
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
}
|
|
|
|
static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
|
|
{
|
|
return (hc32_to_cpu(ohci, ed->hwINFO) & ED_IN) != 0
|
|
&& (hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK)
|
|
== (hc32_to_cpu(ohci, ed->hwTailP) & TD_MASK)
|
|
&& !list_empty(&ed->td_list);
|
|
}
|
|
|
|
/* ZF Micro watchdog timer callback. The ZF Micro chipset sometimes completes
|
|
* an interrupt TD but neglects to add it to the donelist. On systems with
|
|
* this chipset, we need to periodically check the state of the queues to look
|
|
* for such "lost" TDs.
|
|
*/
|
|
static void unlink_watchdog_func(unsigned long _ohci)
|
|
{
|
|
unsigned long flags;
|
|
unsigned max;
|
|
unsigned seen_count = 0;
|
|
unsigned i;
|
|
struct ed **seen = NULL;
|
|
struct ohci_hcd *ohci = (struct ohci_hcd *) _ohci;
|
|
|
|
spin_lock_irqsave(&ohci->lock, flags);
|
|
max = ohci->eds_scheduled;
|
|
if (!max)
|
|
goto done;
|
|
|
|
if (ohci->ed_to_check)
|
|
goto out;
|
|
|
|
seen = kcalloc(max, sizeof *seen, GFP_ATOMIC);
|
|
if (!seen)
|
|
goto out;
|
|
|
|
for (i = 0; i < NUM_INTS; i++) {
|
|
struct ed *ed = ohci->periodic[i];
|
|
|
|
while (ed) {
|
|
unsigned temp;
|
|
|
|
/* scan this branch of the periodic schedule tree */
|
|
for (temp = 0; temp < seen_count; temp++) {
|
|
if (seen[temp] == ed) {
|
|
/* we've checked it and what's after */
|
|
ed = NULL;
|
|
break;
|
|
}
|
|
}
|
|
if (!ed)
|
|
break;
|
|
seen[seen_count++] = ed;
|
|
if (!check_ed(ohci, ed)) {
|
|
ed = ed->ed_next;
|
|
continue;
|
|
}
|
|
|
|
/* HC's TD list is empty, but HCD sees at least one
|
|
* TD that's not been sent through the donelist.
|
|
*/
|
|
ohci->ed_to_check = ed;
|
|
ohci->zf_delay = 2;
|
|
|
|
/* The HC may wait until the next frame to report the
|
|
* TD as done through the donelist and INTR_WDH. (We
|
|
* just *assume* it's not a multi-TD interrupt URB;
|
|
* those could defer the IRQ more than one frame, using
|
|
* DI...) Check again after the next INTR_SF.
|
|
*/
|
|
ohci_writel(ohci, OHCI_INTR_SF,
|
|
&ohci->regs->intrstatus);
|
|
ohci_writel(ohci, OHCI_INTR_SF,
|
|
&ohci->regs->intrenable);
|
|
|
|
/* flush those writes */
|
|
(void) ohci_readl(ohci, &ohci->regs->control);
|
|
|
|
goto out;
|
|
}
|
|
}
|
|
out:
|
|
kfree(seen);
|
|
if (ohci->eds_scheduled)
|
|
mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
|
|
done:
|
|
spin_unlock_irqrestore(&ohci->lock, flags);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*
|
|
* HC functions
|
|
*-------------------------------------------------------------------------*/
|
|
|
|
/* init memory, and kick BIOS/SMM off */
|
|
|
|
static int ohci_init (struct ohci_hcd *ohci)
|
|
{
|
|
int ret;
|
|
struct usb_hcd *hcd = ohci_to_hcd(ohci);
|
|
|
|
if (distrust_firmware)
|
|
ohci->flags |= OHCI_QUIRK_HUB_POWER;
|
|
|
|
disable (ohci);
|
|
ohci->regs = hcd->regs;
|
|
|
|
/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
|
|
* was never needed for most non-PCI systems ... remove the code?
|
|
*/
|
|
|
|
#ifndef IR_DISABLE
|
|
/* SMM owns the HC? not for long! */
|
|
if (!no_handshake && ohci_readl (ohci,
|
|
&ohci->regs->control) & OHCI_CTRL_IR) {
|
|
u32 temp;
|
|
|
|
ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
|
|
|
|
/* this timeout is arbitrary. we make it long, so systems
|
|
* depending on usb keyboards may be usable even if the
|
|
* BIOS/SMM code seems pretty broken.
|
|
*/
|
|
temp = 500; /* arbitrary: five seconds */
|
|
|
|
ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
|
|
ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
|
|
while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
|
|
msleep (10);
|
|
if (--temp == 0) {
|
|
ohci_err (ohci, "USB HC takeover failed!"
|
|
" (BIOS/SMM bug)\n");
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
ohci_usb_reset (ohci);
|
|
}
|
|
#endif
|
|
|
|
/* Disable HC interrupts */
|
|
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
|
|
|
|
/* flush the writes, and save key bits like RWC */
|
|
if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
|
|
ohci->hc_control |= OHCI_CTRL_RWC;
|
|
|
|
/* Read the number of ports unless overridden */
|
|
if (ohci->num_ports == 0)
|
|
ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
|
|
|
|
if (ohci->hcca)
|
|
return 0;
|
|
|
|
ohci->hcca = dma_alloc_coherent (hcd->self.controller,
|
|
sizeof *ohci->hcca, &ohci->hcca_dma, 0);
|
|
if (!ohci->hcca)
|
|
return -ENOMEM;
|
|
|
|
if ((ret = ohci_mem_init (ohci)) < 0)
|
|
ohci_stop (hcd);
|
|
else {
|
|
create_debug_files (ohci);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Start an OHCI controller, set the BUS operational
|
|
* resets USB and controller
|
|
* enable interrupts
|
|
*/
|
|
static int ohci_run (struct ohci_hcd *ohci)
|
|
{
|
|
u32 mask, temp;
|
|
int first = ohci->fminterval == 0;
|
|
struct usb_hcd *hcd = ohci_to_hcd(ohci);
|
|
|
|
disable (ohci);
|
|
|
|
/* boot firmware should have set this up (5.1.1.3.1) */
|
|
if (first) {
|
|
|
|
temp = ohci_readl (ohci, &ohci->regs->fminterval);
|
|
ohci->fminterval = temp & 0x3fff;
|
|
if (ohci->fminterval != FI)
|
|
ohci_dbg (ohci, "fminterval delta %d\n",
|
|
ohci->fminterval - FI);
|
|
ohci->fminterval |= FSMP (ohci->fminterval) << 16;
|
|
/* also: power/overcurrent flags in roothub.a */
|
|
}
|
|
|
|
/* Reset USB nearly "by the book". RemoteWakeupConnected has
|
|
* to be checked in case boot firmware (BIOS/SMM/...) has set up
|
|
* wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
|
|
* If the bus glue detected wakeup capability then it should
|
|
* already be enabled; if so we'll just enable it again.
|
|
*/
|
|
if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
|
|
device_set_wakeup_capable(hcd->self.controller, 1);
|
|
|
|
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
|
|
case OHCI_USB_OPER:
|
|
temp = 0;
|
|
break;
|
|
case OHCI_USB_SUSPEND:
|
|
case OHCI_USB_RESUME:
|
|
ohci->hc_control &= OHCI_CTRL_RWC;
|
|
ohci->hc_control |= OHCI_USB_RESUME;
|
|
temp = 10 /* msec wait */;
|
|
break;
|
|
// case OHCI_USB_RESET:
|
|
default:
|
|
ohci->hc_control &= OHCI_CTRL_RWC;
|
|
ohci->hc_control |= OHCI_USB_RESET;
|
|
temp = 50 /* msec wait */;
|
|
break;
|
|
}
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
// flush the writes
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
msleep(temp);
|
|
|
|
memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
|
|
|
|
/* 2msec timelimit here means no irqs/preempt */
|
|
spin_lock_irq (&ohci->lock);
|
|
|
|
retry:
|
|
/* HC Reset requires max 10 us delay */
|
|
ohci_writel (ohci, OHCI_HCR, &ohci->regs->cmdstatus);
|
|
temp = 30; /* ... allow extra time */
|
|
while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
|
|
if (--temp == 0) {
|
|
spin_unlock_irq (&ohci->lock);
|
|
ohci_err (ohci, "USB HC reset timed out!\n");
|
|
return -1;
|
|
}
|
|
udelay (1);
|
|
}
|
|
|
|
/* now we're in the SUSPEND state ... must go OPERATIONAL
|
|
* within 2msec else HC enters RESUME
|
|
*
|
|
* ... but some hardware won't init fmInterval "by the book"
|
|
* (SiS, OPTi ...), so reset again instead. SiS doesn't need
|
|
* this if we write fmInterval after we're OPERATIONAL.
|
|
* Unclear about ALi, ServerWorks, and others ... this could
|
|
* easily be a longstanding bug in chip init on Linux.
|
|
*/
|
|
if (ohci->flags & OHCI_QUIRK_INITRESET) {
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
// flush those writes
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
}
|
|
|
|
/* Tell the controller where the control and bulk lists are
|
|
* The lists are empty now. */
|
|
ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
|
|
ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
|
|
|
|
/* a reset clears this */
|
|
ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
|
|
|
|
periodic_reinit (ohci);
|
|
|
|
/* some OHCI implementations are finicky about how they init.
|
|
* bogus values here mean not even enumeration could work.
|
|
*/
|
|
if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
|
|
|| !ohci_readl (ohci, &ohci->regs->periodicstart)) {
|
|
if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
|
|
ohci->flags |= OHCI_QUIRK_INITRESET;
|
|
ohci_dbg (ohci, "enabling initreset quirk\n");
|
|
goto retry;
|
|
}
|
|
spin_unlock_irq (&ohci->lock);
|
|
ohci_err (ohci, "init err (%08x %04x)\n",
|
|
ohci_readl (ohci, &ohci->regs->fminterval),
|
|
ohci_readl (ohci, &ohci->regs->periodicstart));
|
|
return -EOVERFLOW;
|
|
}
|
|
|
|
/* use rhsc irqs after khubd is fully initialized */
|
|
hcd->poll_rh = 1;
|
|
hcd->uses_new_polling = 1;
|
|
|
|
/* start controller operations */
|
|
ohci->hc_control &= OHCI_CTRL_RWC;
|
|
ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
|
|
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
|
|
hcd->state = HC_STATE_RUNNING;
|
|
|
|
/* wake on ConnectStatusChange, matching external hubs */
|
|
ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
|
|
|
|
/* Choose the interrupts we care about now, others later on demand */
|
|
mask = OHCI_INTR_INIT;
|
|
ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
|
|
ohci_writel (ohci, mask, &ohci->regs->intrenable);
|
|
|
|
/* handle root hub init quirks ... */
|
|
temp = roothub_a (ohci);
|
|
temp &= ~(RH_A_PSM | RH_A_OCPM);
|
|
if (ohci->flags & OHCI_QUIRK_SUPERIO) {
|
|
/* NSC 87560 and maybe others */
|
|
temp |= RH_A_NOCP;
|
|
temp &= ~(RH_A_POTPGT | RH_A_NPS);
|
|
ohci_writel (ohci, temp, &ohci->regs->roothub.a);
|
|
} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
|
|
(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
|
|
/* hub power always on; required for AMD-756 and some
|
|
* Mac platforms. ganged overcurrent reporting, if any.
|
|
*/
|
|
temp |= RH_A_NPS;
|
|
ohci_writel (ohci, temp, &ohci->regs->roothub.a);
|
|
}
|
|
ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
|
|
ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
|
|
&ohci->regs->roothub.b);
|
|
// flush those writes
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
|
|
ohci->next_statechange = jiffies + STATECHANGE_DELAY;
|
|
spin_unlock_irq (&ohci->lock);
|
|
|
|
// POTPGT delay is bits 24-31, in 2 ms units.
|
|
mdelay ((temp >> 23) & 0x1fe);
|
|
hcd->state = HC_STATE_RUNNING;
|
|
|
|
if (quirk_zfmicro(ohci)) {
|
|
/* Create timer to watch for bad queue state on ZF Micro */
|
|
setup_timer(&ohci->unlink_watchdog, unlink_watchdog_func,
|
|
(unsigned long) ohci);
|
|
|
|
ohci->eds_scheduled = 0;
|
|
ohci->ed_to_check = NULL;
|
|
}
|
|
|
|
ohci_dump (ohci, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* an interrupt happens */
|
|
|
|
static irqreturn_t ohci_irq (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
struct ohci_regs __iomem *regs = ohci->regs;
|
|
int ints;
|
|
|
|
/* Read interrupt status (and flush pending writes). We ignore the
|
|
* optimization of checking the LSB of hcca->done_head; it doesn't
|
|
* work on all systems (edge triggering for OHCI can be a factor).
|
|
*/
|
|
ints = ohci_readl(ohci, ®s->intrstatus);
|
|
|
|
/* Check for an all 1's result which is a typical consequence
|
|
* of dead, unclocked, or unplugged (CardBus...) devices
|
|
*/
|
|
if (ints == ~(u32)0) {
|
|
disable (ohci);
|
|
ohci_dbg (ohci, "device removed!\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* We only care about interrupts that are enabled */
|
|
ints &= ohci_readl(ohci, ®s->intrenable);
|
|
|
|
/* interrupt for some other device? */
|
|
if (ints == 0)
|
|
return IRQ_NOTMINE;
|
|
|
|
if (ints & OHCI_INTR_UE) {
|
|
// e.g. due to PCI Master/Target Abort
|
|
if (quirk_nec(ohci)) {
|
|
/* Workaround for a silicon bug in some NEC chips used
|
|
* in Apple's PowerBooks. Adapted from Darwin code.
|
|
*/
|
|
ohci_err (ohci, "OHCI Unrecoverable Error, scheduling NEC chip restart\n");
|
|
|
|
ohci_writel (ohci, OHCI_INTR_UE, ®s->intrdisable);
|
|
|
|
schedule_work (&ohci->nec_work);
|
|
} else {
|
|
disable (ohci);
|
|
ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
|
|
}
|
|
|
|
ohci_dump (ohci, 1);
|
|
ohci_usb_reset (ohci);
|
|
}
|
|
|
|
if (ints & OHCI_INTR_RHSC) {
|
|
ohci_vdbg(ohci, "rhsc\n");
|
|
ohci->next_statechange = jiffies + STATECHANGE_DELAY;
|
|
ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
|
|
®s->intrstatus);
|
|
|
|
/* NOTE: Vendors didn't always make the same implementation
|
|
* choices for RHSC. Many followed the spec; RHSC triggers
|
|
* on an edge, like setting and maybe clearing a port status
|
|
* change bit. With others it's level-triggered, active
|
|
* until khubd clears all the port status change bits. We'll
|
|
* always disable it here and rely on polling until khubd
|
|
* re-enables it.
|
|
*/
|
|
ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable);
|
|
usb_hcd_poll_rh_status(hcd);
|
|
}
|
|
|
|
/* For connect and disconnect events, we expect the controller
|
|
* to turn on RHSC along with RD. But for remote wakeup events
|
|
* this might not happen.
|
|
*/
|
|
else if (ints & OHCI_INTR_RD) {
|
|
ohci_vdbg(ohci, "resume detect\n");
|
|
ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus);
|
|
hcd->poll_rh = 1;
|
|
if (ohci->autostop) {
|
|
spin_lock (&ohci->lock);
|
|
ohci_rh_resume (ohci);
|
|
spin_unlock (&ohci->lock);
|
|
} else
|
|
usb_hcd_resume_root_hub(hcd);
|
|
}
|
|
|
|
if (ints & OHCI_INTR_WDH) {
|
|
spin_lock (&ohci->lock);
|
|
dl_done_list (ohci);
|
|
spin_unlock (&ohci->lock);
|
|
}
|
|
|
|
if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) {
|
|
spin_lock(&ohci->lock);
|
|
if (ohci->ed_to_check) {
|
|
struct ed *ed = ohci->ed_to_check;
|
|
|
|
if (check_ed(ohci, ed)) {
|
|
/* HC thinks the TD list is empty; HCD knows
|
|
* at least one TD is outstanding
|
|
*/
|
|
if (--ohci->zf_delay == 0) {
|
|
struct td *td = list_entry(
|
|
ed->td_list.next,
|
|
struct td, td_list);
|
|
ohci_warn(ohci,
|
|
"Reclaiming orphan TD %p\n",
|
|
td);
|
|
takeback_td(ohci, td);
|
|
ohci->ed_to_check = NULL;
|
|
}
|
|
} else
|
|
ohci->ed_to_check = NULL;
|
|
}
|
|
spin_unlock(&ohci->lock);
|
|
}
|
|
|
|
/* could track INTR_SO to reduce available PCI/... bandwidth */
|
|
|
|
/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
|
|
* when there's still unlinking to be done (next frame).
|
|
*/
|
|
spin_lock (&ohci->lock);
|
|
if (ohci->ed_rm_list)
|
|
finish_unlinks (ohci, ohci_frame_no(ohci));
|
|
if ((ints & OHCI_INTR_SF) != 0
|
|
&& !ohci->ed_rm_list
|
|
&& !ohci->ed_to_check
|
|
&& HC_IS_RUNNING(hcd->state))
|
|
ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
|
|
spin_unlock (&ohci->lock);
|
|
|
|
if (HC_IS_RUNNING(hcd->state)) {
|
|
ohci_writel (ohci, ints, ®s->intrstatus);
|
|
ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
|
|
// flush those writes
|
|
(void) ohci_readl (ohci, &ohci->regs->control);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void ohci_stop (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
ohci_dump (ohci, 1);
|
|
|
|
flush_scheduled_work();
|
|
|
|
ohci_usb_reset (ohci);
|
|
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
|
|
free_irq(hcd->irq, hcd);
|
|
hcd->irq = -1;
|
|
|
|
if (quirk_zfmicro(ohci))
|
|
del_timer(&ohci->unlink_watchdog);
|
|
if (quirk_amdiso(ohci))
|
|
amd_iso_dev_put();
|
|
|
|
remove_debug_files (ohci);
|
|
ohci_mem_cleanup (ohci);
|
|
if (ohci->hcca) {
|
|
dma_free_coherent (hcd->self.controller,
|
|
sizeof *ohci->hcca,
|
|
ohci->hcca, ohci->hcca_dma);
|
|
ohci->hcca = NULL;
|
|
ohci->hcca_dma = 0;
|
|
}
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_PM) || defined(CONFIG_PCI)
|
|
|
|
/* must not be called from interrupt context */
|
|
static int ohci_restart (struct ohci_hcd *ohci)
|
|
{
|
|
int temp;
|
|
int i;
|
|
struct urb_priv *priv;
|
|
|
|
spin_lock_irq(&ohci->lock);
|
|
disable (ohci);
|
|
|
|
/* Recycle any "live" eds/tds (and urbs). */
|
|
if (!list_empty (&ohci->pending))
|
|
ohci_dbg(ohci, "abort schedule...\n");
|
|
list_for_each_entry (priv, &ohci->pending, pending) {
|
|
struct urb *urb = priv->td[0]->urb;
|
|
struct ed *ed = priv->ed;
|
|
|
|
switch (ed->state) {
|
|
case ED_OPER:
|
|
ed->state = ED_UNLINK;
|
|
ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
|
|
ed_deschedule (ohci, ed);
|
|
|
|
ed->ed_next = ohci->ed_rm_list;
|
|
ed->ed_prev = NULL;
|
|
ohci->ed_rm_list = ed;
|
|
/* FALLTHROUGH */
|
|
case ED_UNLINK:
|
|
break;
|
|
default:
|
|
ohci_dbg(ohci, "bogus ed %p state %d\n",
|
|
ed, ed->state);
|
|
}
|
|
|
|
if (!urb->unlinked)
|
|
urb->unlinked = -ESHUTDOWN;
|
|
}
|
|
finish_unlinks (ohci, 0);
|
|
spin_unlock_irq(&ohci->lock);
|
|
|
|
/* paranoia, in case that didn't work: */
|
|
|
|
/* empty the interrupt branches */
|
|
for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
|
|
for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
|
|
|
|
/* no EDs to remove */
|
|
ohci->ed_rm_list = NULL;
|
|
|
|
/* empty control and bulk lists */
|
|
ohci->ed_controltail = NULL;
|
|
ohci->ed_bulktail = NULL;
|
|
|
|
if ((temp = ohci_run (ohci)) < 0) {
|
|
ohci_err (ohci, "can't restart, %d\n", temp);
|
|
return temp;
|
|
}
|
|
ohci_dbg(ohci, "restart complete\n");
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
MODULE_AUTHOR (DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE ("GPL");
|
|
|
|
#ifdef CONFIG_PCI
|
|
#include "ohci-pci.c"
|
|
#define PCI_DRIVER ohci_pci_driver
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111)
|
|
#include "ohci-sa1111.c"
|
|
#define SA1111_DRIVER ohci_hcd_sa1111_driver
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
|
|
#include "ohci-s3c2410.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP
|
|
#include "ohci-omap.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_omap_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_LH7A404
|
|
#include "ohci-lh7a404.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_lh7a404_driver
|
|
#endif
|
|
|
|
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
|
|
#include "ohci-pxa27x.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_pxa27x_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_EP93XX
|
|
#include "ohci-ep93xx.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_ep93xx_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_AU1X00
|
|
#include "ohci-au1xxx.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_au1xxx_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_PNX8550
|
|
#include "ohci-pnx8550.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_pnx8550_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
|
|
#include "ohci-ppc-soc.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_ppc_soc_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_AT91
|
|
#include "ohci-at91.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_at91_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_PNX4008
|
|
#include "ohci-pnx4008.c"
|
|
#define PLATFORM_DRIVER usb_hcd_pnx4008_driver
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7763) || \
|
|
defined(CONFIG_CPU_SUBTYPE_SH7786)
|
|
#include "ohci-sh.c"
|
|
#define PLATFORM_DRIVER ohci_hcd_sh_driver
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_USB_OHCI_HCD_PPC_OF
|
|
#include "ohci-ppc-of.c"
|
|
#define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_PS3
|
|
#include "ohci-ps3.c"
|
|
#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_OHCI_HCD_SSB
|
|
#include "ohci-ssb.c"
|
|
#define SSB_OHCI_DRIVER ssb_ohci_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_MFD_SM501
|
|
#include "ohci-sm501.c"
|
|
#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
|
|
#endif
|
|
|
|
#ifdef CONFIG_MFD_TC6393XB
|
|
#include "ohci-tmio.c"
|
|
#define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver
|
|
#endif
|
|
|
|
#if !defined(PCI_DRIVER) && \
|
|
!defined(PLATFORM_DRIVER) && \
|
|
!defined(OF_PLATFORM_DRIVER) && \
|
|
!defined(SA1111_DRIVER) && \
|
|
!defined(PS3_SYSTEM_BUS_DRIVER) && \
|
|
!defined(SM501_OHCI_DRIVER) && \
|
|
!defined(TMIO_OHCI_DRIVER) && \
|
|
!defined(SSB_OHCI_DRIVER)
|
|
#error "missing bus glue for ohci-hcd"
|
|
#endif
|
|
|
|
static int __init ohci_hcd_mod_init(void)
|
|
{
|
|
int retval = 0;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
|
|
pr_debug ("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
|
|
sizeof (struct ed), sizeof (struct td));
|
|
set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
|
|
|
|
#ifdef DEBUG
|
|
ohci_debug_root = debugfs_create_dir("ohci", NULL);
|
|
if (!ohci_debug_root) {
|
|
retval = -ENOENT;
|
|
goto error_debug;
|
|
}
|
|
#endif
|
|
|
|
#ifdef PS3_SYSTEM_BUS_DRIVER
|
|
retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
|
|
if (retval < 0)
|
|
goto error_ps3;
|
|
#endif
|
|
|
|
#ifdef PLATFORM_DRIVER
|
|
retval = platform_driver_register(&PLATFORM_DRIVER);
|
|
if (retval < 0)
|
|
goto error_platform;
|
|
#endif
|
|
|
|
#ifdef OF_PLATFORM_DRIVER
|
|
retval = of_register_platform_driver(&OF_PLATFORM_DRIVER);
|
|
if (retval < 0)
|
|
goto error_of_platform;
|
|
#endif
|
|
|
|
#ifdef SA1111_DRIVER
|
|
retval = sa1111_driver_register(&SA1111_DRIVER);
|
|
if (retval < 0)
|
|
goto error_sa1111;
|
|
#endif
|
|
|
|
#ifdef PCI_DRIVER
|
|
retval = pci_register_driver(&PCI_DRIVER);
|
|
if (retval < 0)
|
|
goto error_pci;
|
|
#endif
|
|
|
|
#ifdef SSB_OHCI_DRIVER
|
|
retval = ssb_driver_register(&SSB_OHCI_DRIVER);
|
|
if (retval)
|
|
goto error_ssb;
|
|
#endif
|
|
|
|
#ifdef SM501_OHCI_DRIVER
|
|
retval = platform_driver_register(&SM501_OHCI_DRIVER);
|
|
if (retval < 0)
|
|
goto error_sm501;
|
|
#endif
|
|
|
|
#ifdef TMIO_OHCI_DRIVER
|
|
retval = platform_driver_register(&TMIO_OHCI_DRIVER);
|
|
if (retval < 0)
|
|
goto error_tmio;
|
|
#endif
|
|
|
|
return retval;
|
|
|
|
/* Error path */
|
|
#ifdef TMIO_OHCI_DRIVER
|
|
platform_driver_unregister(&TMIO_OHCI_DRIVER);
|
|
error_tmio:
|
|
#endif
|
|
#ifdef SM501_OHCI_DRIVER
|
|
platform_driver_unregister(&SM501_OHCI_DRIVER);
|
|
error_sm501:
|
|
#endif
|
|
#ifdef SSB_OHCI_DRIVER
|
|
ssb_driver_unregister(&SSB_OHCI_DRIVER);
|
|
error_ssb:
|
|
#endif
|
|
#ifdef PCI_DRIVER
|
|
pci_unregister_driver(&PCI_DRIVER);
|
|
error_pci:
|
|
#endif
|
|
#ifdef SA1111_DRIVER
|
|
sa1111_driver_unregister(&SA1111_DRIVER);
|
|
error_sa1111:
|
|
#endif
|
|
#ifdef OF_PLATFORM_DRIVER
|
|
of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
|
|
error_of_platform:
|
|
#endif
|
|
#ifdef PLATFORM_DRIVER
|
|
platform_driver_unregister(&PLATFORM_DRIVER);
|
|
error_platform:
|
|
#endif
|
|
#ifdef PS3_SYSTEM_BUS_DRIVER
|
|
ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
|
|
error_ps3:
|
|
#endif
|
|
#ifdef DEBUG
|
|
debugfs_remove(ohci_debug_root);
|
|
ohci_debug_root = NULL;
|
|
error_debug:
|
|
#endif
|
|
|
|
clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
|
|
return retval;
|
|
}
|
|
module_init(ohci_hcd_mod_init);
|
|
|
|
static void __exit ohci_hcd_mod_exit(void)
|
|
{
|
|
#ifdef TMIO_OHCI_DRIVER
|
|
platform_driver_unregister(&TMIO_OHCI_DRIVER);
|
|
#endif
|
|
#ifdef SM501_OHCI_DRIVER
|
|
platform_driver_unregister(&SM501_OHCI_DRIVER);
|
|
#endif
|
|
#ifdef SSB_OHCI_DRIVER
|
|
ssb_driver_unregister(&SSB_OHCI_DRIVER);
|
|
#endif
|
|
#ifdef PCI_DRIVER
|
|
pci_unregister_driver(&PCI_DRIVER);
|
|
#endif
|
|
#ifdef SA1111_DRIVER
|
|
sa1111_driver_unregister(&SA1111_DRIVER);
|
|
#endif
|
|
#ifdef OF_PLATFORM_DRIVER
|
|
of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
|
|
#endif
|
|
#ifdef PLATFORM_DRIVER
|
|
platform_driver_unregister(&PLATFORM_DRIVER);
|
|
#endif
|
|
#ifdef PS3_SYSTEM_BUS_DRIVER
|
|
ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
|
|
#endif
|
|
#ifdef DEBUG
|
|
debugfs_remove(ohci_debug_root);
|
|
#endif
|
|
clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
|
|
}
|
|
module_exit(ohci_hcd_mod_exit);
|
|
|