This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.

Sergio Cambra f4d6f7dce7 Bluetooth device 04ca:3008 should use ath3k ... Output of /sys/kernel/debug/usb/devices T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3008 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Sergio Cambra <sergio@programatica.es> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>		2013-01-10 02:51:03 -02:00
..
Kconfig	Bluetooth: Initial skeleton for Three-wire UART (H5) support	2012-07-17 14:33:20 -03:00
Makefile	Bluetooth: Initial skeleton for Three-wire UART (H5) support	2012-07-17 14:33:20 -03:00
ath3k.c	Bluetooth device 04ca:3008 should use ath3k	2013-01-10 02:51:03 -02:00
bcm203x.c	Bluetooth: Use devm_kzalloc in bcm203x.c file.	2012-08-06 15:03:00 -03:00
bfusb.c	Bluetooth: Use devm_kzalloc in bfusb.c file	2012-08-06 15:03:00 -03:00
bluecard_cs.c	Bluetooth: bluecard_cs.c: removes unnecessary semicolon	2012-09-18 22:26:09 -03:00
bpa10x.c	Bluetooth: Use devm_kzalloc in bpa10x.c file	2012-08-06 15:03:01 -03:00
bt3c_cs.c	Bluetooth: Use devm_kzalloc in bt3c_cs.c file	2012-08-06 15:03:01 -03:00
btmrvl_debugfs.c	simple_open: automatically convert to simple_open()	2012-04-05 15:25:50 -07:00
btmrvl_drv.h	Bluetooth: btmrvl: Do not send vendor events to bluetooth stack	2012-06-19 00:19:11 -03:00
btmrvl_main.c	Bluetooth: btmrvl: trivial style fixes	2012-07-09 09:45:10 -03:00
btmrvl_sdio.c	Bluetooth: btmrv: Use %*ph specifier instead of print_hex_dump_bytes	2012-10-11 14:21:15 +08:00
btmrvl_sdio.h	Bluetooth: btmrvl: support Marvell Bluetooth device SD8787	2011-04-13 12:20:05 -03:00
btsdio.c	Bluetooth: Use devm_kzalloc in btsdio.c file	2012-08-06 15:03:01 -03:00
btuart_cs.c	Bluetooth: btuart_cs.c: removes unnecessary semicolon	2012-09-18 22:27:17 -03:00
btusb.c	Bluetooth device 04ca:3008 should use ath3k	2013-01-10 02:51:03 -02:00
btwilink.c	Bluetooth: Use module_platform_driver() in btwilink.c file	2012-09-08 16:53:47 -03:00
dtl1_cs.c	Bluetooth: Use devm_kzalloc in dtl1_cs.c file	2012-08-06 15:03:02 -03:00
hci_ath.c	tty: move the termios object into the tty	2012-07-16 13:00:41 -07:00
hci_bcsp.c	Bluetooth: Remove 'register' usage from the subsystem	2012-06-05 06:34:07 +03:00
hci_h4.c	Bluetooth: Remove 'register' usage from the subsystem	2012-06-05 06:34:07 +03:00
hci_h5.c	Bluetooth: Introduce a flags variable to Three-wire UART state	2012-07-17 14:49:24 -03:00
hci_ldisc.c	TTY: hci_ldisc, remove invalid check in open	2012-10-22 16:50:53 -07:00
hci_ll.c	Bluetooth: hci_ll.c: removes unnecessary semicolon	2012-09-18 22:26:33 -03:00
hci_uart.h	Bluetooth: Add delayed init sequence support for UART controllers	2012-07-17 14:48:29 -03:00
hci_vhci.c	Bluetooth: hci_vhci.c: removes unnecessary semicolon	2012-09-18 22:26:43 -03:00