/* * AMD 76x Memory Controller kernel module * (C) 2003 Linux Networx (http://lnxi.com) * This file may be distributed under the terms of the * GNU General Public License. * * Written by Thayne Harbaugh * Based on work by Dan Hollis and others. * http://www.anime.net/~goemon/linux-ecc/ * * $Id: edac_amd76x.c,v 1.4.2.5 2005/10/05 00:43:44 dsp_llnl Exp $ * */ #include #include #include #include #include #include #include "edac_mc.h" #define amd76x_printk(level, fmt, arg...) \ edac_printk(level, "amd76x", fmt, ##arg) #define amd76x_mc_printk(mci, level, fmt, arg...) \ edac_mc_chipset_printk(mci, level, "amd76x", fmt, ##arg) #define AMD76X_NR_CSROWS 8 #define AMD76X_NR_CHANS 1 #define AMD76X_NR_DIMMS 4 /* AMD 76x register addresses - device 0 function 0 - PCI bridge */ #define AMD76X_ECC_MODE_STATUS 0x48 /* Mode and status of ECC (32b) * * 31:16 reserved * 15:14 SERR enabled: x1=ue 1x=ce * 13 reserved * 12 diag: disabled, enabled * 11:10 mode: dis, EC, ECC, ECC+scrub * 9:8 status: x1=ue 1x=ce * 7:4 UE cs row * 3:0 CE cs row */ #define AMD76X_DRAM_MODE_STATUS 0x58 /* DRAM Mode and status (32b) * * 31:26 clock disable 5 - 0 * 25 SDRAM init * 24 reserved * 23 mode register service * 22:21 suspend to RAM * 20 burst refresh enable * 19 refresh disable * 18 reserved * 17:16 cycles-per-refresh * 15:8 reserved * 7:0 x4 mode enable 7 - 0 */ #define AMD76X_MEM_BASE_ADDR 0xC0 /* Memory base address (8 x 32b) * * 31:23 chip-select base * 22:16 reserved * 15:7 chip-select mask * 6:3 reserved * 2:1 address mode * 0 chip-select enable */ struct amd76x_error_info { u32 ecc_mode_status; }; enum amd76x_chips { AMD761 = 0, AMD762 }; struct amd76x_dev_info { const char *ctl_name; }; static const struct amd76x_dev_info amd76x_devs[] = { [AMD761] = {.ctl_name = "AMD761"}, [AMD762] = {.ctl_name = "AMD762"}, }; /** * amd76x_get_error_info - fetch error information * @mci: Memory controller * @info: Info to fill in * * Fetch and store the AMD76x ECC status. Clear pending status * on the chip so that further errors will be reported */ static void amd76x_get_error_info (struct mem_ctl_info *mci, struct amd76x_error_info *info) { pci_read_config_dword(mci->pdev, AMD76X_ECC_MODE_STATUS, &info->ecc_mode_status); if (info->ecc_mode_status & BIT(8)) pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, (u32) BIT(8), (u32) BIT(8)); if (info->ecc_mode_status & BIT(9)) pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, (u32) BIT(9), (u32) BIT(9)); } /** * amd76x_process_error_info - Error check * @mci: Memory controller * @info: Previously fetched information from chip * @handle_errors: 1 if we should do recovery * * Process the chip state and decide if an error has occurred. * A return of 1 indicates an error. Also if handle_errors is true * then attempt to handle and clean up after the error */ static int amd76x_process_error_info (struct mem_ctl_info *mci, struct amd76x_error_info *info, int handle_errors) { int error_found; u32 row; error_found = 0; /* * Check for an uncorrectable error */ if (info->ecc_mode_status & BIT(8)) { error_found = 1; if (handle_errors) { row = (info->ecc_mode_status >> 4) & 0xf; edac_mc_handle_ue(mci, mci->csrows[row].first_page, 0, row, mci->ctl_name); } } /* * Check for a correctable error */ if (info->ecc_mode_status & BIT(9)) { error_found = 1; if (handle_errors) { row = info->ecc_mode_status & 0xf; edac_mc_handle_ce(mci, mci->csrows[row].first_page, 0, 0, row, 0, mci->ctl_name); } } return error_found; } /** * amd76x_check - Poll the controller * @mci: Memory controller * * Called by the poll handlers this function reads the status * from the controller and checks for errors. */ static void amd76x_check(struct mem_ctl_info *mci) { struct amd76x_error_info info; debugf3("%s()\n", __func__); amd76x_get_error_info(mci, &info); amd76x_process_error_info(mci, &info, 1); } /** * amd76x_probe1 - Perform set up for detected device * @pdev; PCI device detected * @dev_idx: Device type index * * We have found an AMD76x and now need to set up the memory * controller status reporting. We configure and set up the * memory controller reporting and claim the device. */ static int amd76x_probe1(struct pci_dev *pdev, int dev_idx) { int rc = -ENODEV; int index; struct mem_ctl_info *mci = NULL; enum edac_type ems_modes[] = { EDAC_NONE, EDAC_EC, EDAC_SECDED, EDAC_SECDED }; u32 ems; u32 ems_mode; debugf0("%s()\n", __func__); pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, &ems); ems_mode = (ems >> 10) & 0x3; mci = edac_mc_alloc(0, AMD76X_NR_CSROWS, AMD76X_NR_CHANS); if (mci == NULL) { rc = -ENOMEM; goto fail; } debugf0("%s(): mci = %p\n", __func__, mci); mci->pdev = pci_dev_get(pdev); mci->mtype_cap = MEM_FLAG_RDDR; mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; mci->edac_cap = ems_mode ? (EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE; mci->mod_name = BS_MOD_STR; mci->mod_ver = "$Revision: 1.4.2.5 $"; mci->ctl_name = amd76x_devs[dev_idx].ctl_name; mci->edac_check = amd76x_check; mci->ctl_page_to_phys = NULL; for (index = 0; index < mci->nr_csrows; index++) { struct csrow_info *csrow = &mci->csrows[index]; u32 mba; u32 mba_base; u32 mba_mask; u32 dms; /* find the DRAM Chip Select Base address and mask */ pci_read_config_dword(mci->pdev, AMD76X_MEM_BASE_ADDR + (index * 4), &mba); if (!(mba & BIT(0))) continue; mba_base = mba & 0xff800000UL; mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL; pci_read_config_dword(mci->pdev, AMD76X_DRAM_MODE_STATUS, &dms); csrow->first_page = mba_base >> PAGE_SHIFT; csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT; csrow->last_page = csrow->first_page + csrow->nr_pages - 1; csrow->page_mask = mba_mask >> PAGE_SHIFT; csrow->grain = csrow->nr_pages << PAGE_SHIFT; csrow->mtype = MEM_RDDR; csrow->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN; csrow->edac_mode = ems_modes[ems_mode]; } /* clear counters */ pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, (u32) (0x3 << 8), (u32) (0x3 << 8)); if (edac_mc_add_mc(mci)) { debugf3("%s(): failed edac_mc_add_mc()\n", __func__); goto fail; } /* get this far and it's successful */ debugf3("%s(): success\n", __func__); return 0; fail: if (mci) { if(mci->pdev) pci_dev_put(mci->pdev); edac_mc_free(mci); } return rc; } /* returns count (>= 0), or negative on error */ static int __devinit amd76x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { debugf0("%s()\n", __func__); /* don't need to call pci_device_enable() */ return amd76x_probe1(pdev, ent->driver_data); } /** * amd76x_remove_one - driver shutdown * @pdev: PCI device being handed back * * Called when the driver is unloaded. Find the matching mci * structure for the device then delete the mci and free the * resources. */ static void __devexit amd76x_remove_one(struct pci_dev *pdev) { struct mem_ctl_info *mci; debugf0("%s()\n", __func__); if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL) return; if (edac_mc_del_mc(mci)) return; pci_dev_put(mci->pdev); edac_mc_free(mci); } static const struct pci_device_id amd76x_pci_tbl[] __devinitdata = { {PCI_VEND_DEV(AMD, FE_GATE_700C), PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD762}, {PCI_VEND_DEV(AMD, FE_GATE_700E), PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD761}, {0,} /* 0 terminated list. */ }; MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl); static struct pci_driver amd76x_driver = { .name = BS_MOD_STR, .probe = amd76x_init_one, .remove = __devexit_p(amd76x_remove_one), .id_table = amd76x_pci_tbl, }; static int __init amd76x_init(void) { return pci_register_driver(&amd76x_driver); } static void __exit amd76x_exit(void) { pci_unregister_driver(&amd76x_driver); } module_init(amd76x_init); module_exit(amd76x_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); MODULE_DESCRIPTION("MC support for AMD 76x memory controllers");