pubname_callback_param::found should be initialized to 0 in
fastpath lookup, the structure is on the stack and
uninitialized otherwise.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/1304066518-30420-2-git-send-email-ming.m.lin@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The original Makefile uses "uname -m" to determine ARCH.
This causes problem on x86 when compile perf tool on 32 bit
userspace with a 64 bit kernel.
bench/../../../arch/x86/lib/memcpy_64.S: Assembler messages:
bench/../../../arch/x86/lib/memcpy_64.S:28: Error: bad register name `%rdi'
This is because "uname -m" returns x86_64 and memcpy_64.S is
included in 32 bit build.
Reported-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/1304743274.3132.17.camel@localhost
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Similar to perf-record, tell user about unsupported events
that will not be counted if invoked in verbose mode.
e.g.,
$ perf stat -e dTLB-prefetch-misses -v -- sleep 1
dTLB-prefetch-misses event is not supported by the kernel.
dTLB-prefetch-misses: 0 0 0
Performance counter stats for 'sleep 1':
<not counted> dTLB-prefetch-misses
1.001884783 seconds time elapsed
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1304114655-10600-1-git-send-email-dsahern@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Recent stalled-cycles event names were larger than the 40 chars printout
used by perf list.
Extend that, make it robust for future extensions and also adjust alignments
in face of wider event names.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n009io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
David Ahern reported this perf stat failure:
> # /tmp/build-perf/perf stat -- sleep 1
> Error: stalled-cycles-frontend event is not supported.
> Fatal: Not all events could be opened.
>
> This is a Dell R410 with an E5620 processor.
Fail in a softer fashion on unknown/unsupported events.
Reported-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n006io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adjust to color thresholds to better match the percentages seen in
real workloads. Both are now a bit more sensitive.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n004io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of failing on an unknown event, when new perf stat is run on
older kernels:
$ ./perf stat true
Error: open_counter returned with 22 (Invalid argument). /bin/dmesg
may provide additional information.
Fatal: Not all events could be opened.
Just ignore EINVAL and ENOSYS, we'll print the results as not counted:
Performance counter stats for 'true':
0.239483 task-clock # 0.493 CPUs utilized
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
86 page-faults # 0.359 M/sec
704,766 cycles # 2.943 GHz
<not counted> stalled-cycles
381,961 instructions # 0.54 insns per cycle
69,626 branches # 290.735 M/sec
4,594 branch-misses # 6.60% of all branches
0.000485883 seconds time elapsed
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio5hjpn3dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--sync will tell perf stat to run sync() before starting a command.
This allows IO-heavy tests to be used with --repeat, without one
iteration impacting the other.
Elapsed time will stabilize for example:
before: 3.971525714 seconds time elapsed ( +- 8.56% )
after: 3.211098537 seconds time elapsed ( +- 1.52% )
So measurements will be more accurate.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Print out this kind of l1-dcache-misses percentage:
Performance counter stats for './bw_tcp localhost':
29,956,262,201 cycles # 3.002 GHz (scaled from 85.14%)
8,255,209,558 stalled-cycles # 27.56% of all cycles are idle (scaled from 86.56%)
1,206,130,308 l1-dcache-misses # 40.49% of all L1-dcache hits (scaled from 86.30%)
2,978,756,779 l1-dcache-refs # 298.512 M/sec (scaled from 70.02%)
8,861,956,159 instructions # 0.30 insns per cycle
# 0.93 stalled cycles per insn (scaled from 84.27%)
1,644,306,068 branches # 164.782 M/sec (scaled from 86.43%)
74,778,443 branch-misses # 4.55% of all branches (scaled from 70.69%)
9978.695711 task-clock # 0.693 CPUs utilized
14.404347983 seconds time elapsed
And color the result depending on the severity of cache-trashing.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-54gmz0zymaid84zcs7joq02p@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Print the missed-branches percentage with different warning level ASCII colors,
as the percentage passes the 5%/10%/20% thresholds.
These thresholds are set to relatively low levels, because on most CPUs even a
moderate percentage of branch-misses already shows up as a slowdown.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-ybqukg7p86leiup7gl03ecgk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Print the stalled-cycles percentage with different warning level ASCII colors,
as the percentage passes the 25%/50%/75% thresholds.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-e25zz44rcms7mu9az4fu5zp0@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new default output looks like this:
Performance counter stats for './loop_1b_instructions':
236.010686 task-clock # 0.996 CPUs utilized
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
99 page-faults # 0.000 M/sec
756,487,646 cycles # 3.205 GHz
354,938,996 stalled-cycles # 46.92% of all cycles are idle
1,001,403,797 instructions # 1.32 insns per cycle
# 0.35 stalled cycles per insn
100,279,773 branches # 424.895 M/sec
12,646 branch-misses # 0.013 % of all branches
0.236902540 seconds time elapsed
We dropped cache-refs and cache-misses and added stalled-cycles - this is a
more generic "how well utilized is the CPU" metric.
If the stalled-cycles ratio is too high then more specific measurements can be
taken to figure out the source of the inefficiency.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-pbpl2l4mn797s69bclfpwkwn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add stalled cycles accounting and use it to print the "cycles stalled per
instruction" value.
Also change the unit of the cycles output from M/sec to GHz - this is more
intuitive.
Prettify the output to:
Performance counter stats for './loop_1b_instructions':
239.775036 task-clock # 0.997 CPUs utilized
761,903,912 cycles # 3.178 GHz
356,620,620 stalled-cycles # 46.81% of all cycles are idle
1,001,578,351 instructions # 1.31 insns per cycle
# 0.36 stalled cycles per insn
14,782 cache-references # 0.062 M/sec
5,694 cache-misses # 38.520 % of all cache refs
0.240493656 seconds time elapsed
Also adjust the --repeat output to make the percentages align vertically:
Performance counter stats for './loop_1b_instructions' (10 runs):
236.096793 task-clock # 0.997 CPUs utilized ( +- 0.011% )
756,553,086 cycles # 3.204 GHz ( +- 0.002% )
354,942,692 stalled-cycles # 46.92% of all cycles are idle ( +- 0.008% )
1,001,389,700 instructions # 1.32 insns per cycle
# 0.35 stalled cycles per insn ( +- 0.000% )
10,166 cache-references # 0.043 M/sec ( +- 0.742% )
468 cache-misses # 4.608 % of all cache refs ( +- 13.385% )
0.236874136 seconds time elapsed ( +- 0.01% )
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-uapziqny39601apdmmhoz7hk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create update_shadow_stats() which is then used in both read_counter_aggr()
and read_counter().
This not only simplifies the code but also fixes a bug: HW_CACHE_REFERENCES
was not updated in read_counter().
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-9uc55z3g88r47exde7zxjm6p@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Right now we display this by default:
0.202204 task-clock-msecs # 0.282 CPUs
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
85 page-faults # 0.420 M/sec
The task-clock-msecs event cannot actually be passed back as an
event name, the event name we recognize is 'task-clock'.
So change the output of the cpu-clock and task-clock events
to be idempotent.
( Units should be printed out in the right-side column, if needed. )
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-lexrnbzy09asscgd4f7oac4i@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently we fail without printing any error message on "perf stat -e task-clock-msecs".
The reason is that the task-clock event is matched and the "-msecs" postfix is assumed
to be an event modifier - but is not recognized.
This patch changes the code to be more informative:
$ perf stat -e task-clock-msecs true
invalid event modifier: '-msecs'
Run 'perf list' for a list of valid events and modifiers
And restructures the return value of parse_event_modifier() to allow
the printing of all variants of invalid event modifiers.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-wlaw3dvz1ly6wple8l52cfca@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We currently fail on something like '-e CPU-migrations', with:
invalid or unsupported event: 'CPU-migrations'
While 'CPU-migrations' is how we actually print out the event
in the default perf stat output:
Performance counter stats for 'true':
0.202204 task-clock-msecs # 0.282 CPUs
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
So change the matching to be case-insensitive.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-omcm3edjjtx83a4kh2e244se@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new PERF_COUNT_HW_STALLED_CYCLES event tries to approximate
cycles the CPU does nothing useful, because it is stalled on a
cache-miss or some other condition.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-fue11vymwqsoo5to72jxxjyl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Check for required sample attributes using evsel rather than sample_type
in the session header. If the attribute for a default field is not
present for the event type (e.g., new command operating on file from
older kernel) the field is removed from the output list.
Expected event types must exist. For example, if a user specifies
-f trace:time,trace -f sw:time,cpu,sym
the perf.data file must contain both tracepoints and software events
(ie., it is an error if either does not exist in the file).
Attribute checking is done once at the beginning of perf-script rather
than for each sample.
v1 -> v2:
- addressed comments from acme
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1302148460-570-1-git-send-email-daahern@cisco.com
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The `try-cc' user-defined function was in tools/perf/feature-tests.mak;
this commit moves it to tools/perf/config/utilities.mak.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Link: http://lkml.kernel.org/n/tip-bqhwcuxsrve0iodn6q4ejaoi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, Python 3 is not supported by perf's code; this
can cause the build to fail for systems that have Python 3
installed as the default python:
python{,-config}
The Correct Solution is to write compatibility code so that
Python 3 works out-of-the-box.
However, users often have an ancillary Python 2 installed:
python2{,-config}
Therefore, a quick fix is to allow the user to specify those
ancillary paths as the python binaries that Makefile should
use, thereby avoiding Python 3 altogether; as an added benefit,
the Python binaries may be installed in non-standard locations
without the need for updating any PATH variable.
This commit adds the ability to set PYTHON and/or PYTHON_CONFIG
either as environment variables or as make variables on the
command line; the paths may be relative, and usually only PYTHON
is necessary in order for PYTHON_CONFIG to be defined implicitly.
Some rudimentary error checking is performed when the user
explicitly specifies a value for any of these variables.
In addition, this commit introduces significantly robust makefile
infrastructure for working with paths and communicating with the
shell; it's currently only used for handling Python, but I hope
it will prove useful in refactoring the makefiles.
Thanks to:
Raghavendra D Prabhu <rprabhu@wnohang.net>
for motivating this patch.
Acked-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Link: http://lkml.kernel.org/r/e987828e-87ec-4973-95e7-47f10f5d9bab-mfwitten@gmail.com
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more installment on an area that is mostly dormant.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat doesn't mmap and its perfectly fine for it to use task-bound
counters with inheritance.
So set the attr.inherit on the caller and leave the syscall itself to
validate it.
When the mmap fails perf_evlist__mmap will just emit a warning if this
is the failure reason.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20110414170121.GC3229@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In hists browser, press hotkey 'a' to annotate current symbol.
Now it causes segment fault if 'a' is pressed on a null symbol.
Here are 2 small bugs:
- In perf_evsel__hists_browse, the condition check after 'a' is pressed
is not correct, we should check ->sym instead of ->map.
- In symbol__tui_annotate we must check whether sym is NULL or not
before getting annotation structure.
This patch fixes above 2 small bugs.
Link: http://lkml.kernel.org/r/1302244286.4106.36.camel@minggr.sh.intel.com
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix this:
util/cgroup.c: In function ‘open_cgroup’:
util/cgroup.c:16:16: error: ‘saved_ptr’ may be used uninitialized in this function
util/cgroup.c:16:16: note: ‘saved_ptr’ was declared here
Apparently newer GCC (4.6) can figure out that this variable is properly
initialized - but some versions of GCC (such as 4.5.2) need help.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-32, fpu: Fix FPU exception handling on non-SSE systems
x86, hibernate: Initialize mmu_cr4_features during boot
x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
x86: visws: Fixup irq overhaul fallout
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Clean up rebalance_domains() load-balance interval calculation
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Fix cpumask leak in __setup_irq()
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf probe: Fix listing incorrect line number with inline function
perf probe: Fix to find recursively inlined function
perf probe: Fix multiple --vars options behavior
perf probe: Fix to remove redundant close
perf probe: Fix to ensure function declared file
Fix a bug showing incorrect line number when a probe is put on the head of an
inline function. This patch updates find_perf_probe_point() and introduces new
rules to get correct line number.
- If debuginfo doesn't have a correct file name, we shouldn't return line
number too, because, without file name, line number is meaningless.
- If the address is in a function, it stores the function name and the offset
from the function entry.
- If the address is on a line, it tries to get the relative line number from
the function entry line, except for the address is same as the entry
address of the function (in this case, the relative line number should
be 0).
- If the address is in an inline function entry (call-site), it uses the
inline function call line number as the line on which the address is.
- If the address is in an inline function body, it stores the inline
function name and offset from the inline function call site instead of the
(non-inlined) function.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092605.2132.11629.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix die_find_inlinefunc() to return correct innermost inlined function
at given address. Without this fix, it returns the outermost inlined
function.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092559.2132.78634.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a bug that perf-probe fails to initialize libdwfl and shows incorrect error
when user gives multiple --vars options.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092553.2132.42691.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since dwfl_end() closes given fd with dwfl, caller doesn't need to close its fd
when finishing process.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092547.2132.93728.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to ensure function declared file matches given file name. This fixes
a potential bug.
As I've commented on Lin Ming's fastpath enhancement, decl_file should
be checked on each probe point if user gives a probe point as func@file.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092541.2132.3584.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default setting of perf record is to mmap 128 pages if the user
did not override with -m.
However the page size may vary accross different architecture
settings, giving different default size between each.
Moreover the kernel side still has a default max number of mlocked
pages of 512 kiB + 1 page for unprivileged users. 128 + 1 pages
with page size > 4096 overlaps this threshold.
Thus, better adapt to this limitation and set the default number of
pages to fit those 512 kiB + 1 page.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1301535324-9735-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Allow:
perf script -f <fields>
to be equivalent to:
perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,
-f trace: -f comm,tid,time,sym
The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:
"Overriding previous field request for all events."
Alternativey, consider the order:
-f comm,tid,time,sym -f trace:
The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.
For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:
perf script -f comm,tid,trace 2>&1 | less
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it is an
error. For example:
perf script -v -f sw:comm,tid,trace 2>&1 | less
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pick up these two commits from Arnaldo's perf/core tree:
ca6a42586fae: perf tools: Emit clearer message for sys_perf_event_open ENOENT return
c286c419c784: perf tools: Fixup exit path when not able to open events
As they are really fixes we want to have sooner than laer.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lin Ming