In today linux-next I got a compile warning in staging/batman-adv.
This is due a struct bin_attribute read function prototype change and the driver was not updated.
This patch solves the issue
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
copy_to_user() returns the number of bites remaining but we want to
return a negative error code here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A new buffer for a packet is created when a icmp packet is received.
This happens in a context with disabled irq. Thus we are not allowed to
sleep or call function which might sleep. kmalloc must be called with
GFP_ATOMIC instead of GFP_KERNEL to ensure that it does not sleep.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Free_netdev is registered as destructor in interface_setup for every
soft_device. This destructor is automatically called from
unregister_netdev and we must not call it again for the freed
net_device.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We must call unregister_netdev when we couldn't initialise the
batman-adv module and the soft_device was registered. There are two
version of the function which we can use:
* unregister_netdevice - removes device
* unregister_netdev - takes rtnl semaphore and remove device
We don't hold the semaphore in an error situation. So we must use
unregister_netdev.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On module shutdown batman-adv would purge the internal packet
queue by sending all remaining packets which could confuse
other nodes. Now, the packets are silently discarded.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all rcu head inits. We don't care about the RCU head state before
passing it to call_rcu() anyway. Only leave the "on_stack" variants so
debugobjects can keep track of objects on stack.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/CodingStyle sets a strongly prefered limit of 80
characters per line in "Chapter 2: Breaking long lines and strings".
Strings must be broken into smaller parts and long statements must be
rewritten.
Reported-by: Mikal Sande <mikal.sande@gmail.com>
Reported-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trailing spaces at the end of a line or before a tab are against
Documentation/CodingStyle "3.1: Spaces" and should be avoided. It is
also common style to add a single space after commas unless it is
followed either by a newline or a tab.
Reported-by: Mikal Sande <mikal.sande@gmail.com>
Reported-by: Luis de Bethencourt <luisbg@ubuntu.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We must ensure that all pointer to a socket buffer are updated when we
copy a socket buffer and free our reference to the old one.
Another part of the kernel could also free its reference which maybe
removes the buffer completely. In that situation we would would feed
wrong information to the routing algorithm after the memory area is
written again by someone else.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As we always return that the we consumed the skb, we should also free the skb
in the case of an error.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch limits the queue lengths of batman and broadcast packets. BATMAN
packets are held back for aggregation and jittered to avoid interferences.
Broadcast packets are stored to be sent out multiple times to increase
the probability to be received by other nodes in lossy environments.
Especially in extreme cases like broadcast storms, the queues have been seen
to run full, eating up all the memory and triggering the infamous OOM killer.
With the queue length limits introduced in this patch, this problem is
avoided.
Each queue is limited to 256 entries for now, resulting in 1 MB of maximum
space available in total for typical setups (assuming one packet including
overhead does not require more than 2000 byte). This should also be reasonable
for smaller routers, otherwise the defines can be tweaked later.
This third version of the patch does not increase the local broadcast
sequence number when the queue is already full.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
BATMAN and broadcast packets are tracked with a sequence number window of
currently 64 entries to measure and avoid duplicates. Packets which have a
sequence number smaller than the newest received packet minus 64 are not
within this sequence number window anymore and are called "old packets"
from now on.
When old packets are received, the routing code assumes that the host of the
originator has been restarted. This assumption however might be wrong as
packets can also be delayed by NIC drivers, e.g. because of long queues or
collision detection in dense WiFi? environments. This behaviour can be
reproduced by doing a broadcast ping flood in a dense node environment.
The effect is that the sequence number window is jumping forth and back,
accepting and forwarding any packet (because packets are assumed to be "new")
and causing loops.
To overcome this problem, the sequence number handling has been reorganized.
When an old packet is received, the window is reset back only once. Other old
packets are dropped for (currently) 30 seconds to "protect" the new sequence
number and avoid the hopping as described above.
The reorganization brings some code cleanups (at least i hope you feel the
same) and also fixes a bug in count_real_packets() which falsely updated
the last_real_seqno for slightly older packets within the seqno window
if they are no duplicates.
This second version of the patch also fixes a problem where for seq_diff==64
bit_shift() reads from outside of the seqno window, and removes the loop
for seq_diff == -64 which was present in the first patch.
The third iteration also adds a window for the next expected sequence numbers.
This minimizes sequence number flapping for packets with very big differences
(e.g. 3 packets with seqno 0, 25000 and 50000 might still cause problems
without this window).
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes unnecessary whitespaces before a quoted
newline that the remaining batman-adv files had.
Reported-by: Luis de Bethencourt <luisbg@ubuntu.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Instead of having a single /proc file "interfaces" in which you have
to echo the wanted interface batman-adv will create a subfolder in each
suitable /sys/class/net folder. This subfolder contains files for the
interface specific settings. For example, mesh_iface to add/remove an
interface from a virtual mesh network (at the moment only bat0 is
supported).
Example:
echo bat0 > /sys/class/net/eth0/batman-adv/mesh_iface
to deactivate:
echo none > /sys/class/net/eth0/batman-adv/mesh_iface
Interfaces which are not compatible with batman-adv won't contain the
batman-adv folder, therefore can't be activated. Not supported are:
loopback, non-ethernet, non-ARP and virtual mesh network interfaces
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the first patch in a series of patches which aim to convert
all batman-adv /proc files to sysfs. To keep the changes in a
digestable size it has been split up into smaller chunks. During
the transition period batman-adv will use /proc as well as sysfs.
As a first step the following files have been converted:
aggregate_ogm, originators, transtable_global, transtable_local
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the 31 unnecessary whitespaces before a quoted
newline that the batman-adv files had.
Signed-off-by: Luis de Bethencourt <luisbg@ubuntu.com>
[sven.eckelmann@gmx.de: Redone to apply against current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code here is testing to see if "i" is passed the end of the array.
The original code works probably, but it's not the cleanest way.
Andrew Lunn suggested that I also remove all the hard coded references
to 256 so I have done that as well.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We are now having a newer, more neutral vis output so that we won't have
to change the kernelmodule for adding support of new vis output formats.
This patch adds an explanation about this in the README file of
batman-adv and removes the description about the dot/json format (they
will be added to the README of batctl).
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Max address is not being used anywhere and just misleading, therefore
removing it. VIS_FORMAT string is now obsolete, so also remove it.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
So far, neighbour's secondary interface OGMs can involuntarily
piggyback on primary interface OGMs that arrived on the same secondary
interface before. Secondary interface OGMs should NEVER leave their
direct neighbour broadcast domain! This patch ensures that secondary
interface OGMs can only be aggregated to other secondary interface OGMs.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
batman-adv aggregates routing packets to reduce the number of packets in
the air. Every outgoing packet is compared with other packets in the
buffer to determine whether it can be aggregated or not. Packets sent
at a lower interval can be held back longer to maximize the aggregation.
Due to insufficient checking batman-adv held back all packets for a
certain time depending on its own lowest interval rate which slowed
down all other nodes.
Reported-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
"tcpdump" and "batctl td" will receive packets with a wrong sequence
number on systems with a different endianess than network byte order.
This happens due to the reordering of bytes in the function which
handles aggregated bat packets. The function which receives the bat
packets must ensure that these buffers aren't shared with anything else
before that function tries to write into it. Otherwise it has to copy
the buffers so it is save again to change them.
Reported-by: Kevin Steen <batman@kevinsteen.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we haven't set the module to MODULE_ACTIVE state before (in general,
no interface has yet been added to batman-adv) then the hna table is not
initialised yet. If the kernel changes the mac address of the bat0
interface at this moment then an hna_local_add() called by interface_set_mac_addr()
then resulted in a null pointer derefernce. With this patch we are now
explicitly checking before if the state is MODULE_ACTIVE right now so
that we can assume having an initialised hna table.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When the seqno for a vis packet had a wrap around from i.e. 255 to 0,
add_packet() would falsely claim the older packet with the seqno 255 as
newer as the one with the seqno of 0 and would therefore ignore the new
packet. This happens with all following vis packets until the old vis
packet expires after 180 seconds timeout. This patch fixes this issue
and gets rid of these highly undesired 3min. breaks for the vis-server.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
TQ and HNA records for originators on secondary interfaces were
wrongly being included on the primary interface. Ensure we output a
line for each source interface on every node, so we correctly separate
primary and secondary interface records.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
send_vis_packets() would disable interrupts before calling
dev_queue_xmit() which resulting in a backtrace in local_bh_enable().
Fix this by using kref on the vis_info object so that we can call
send_vis_packets() without holding vis_hash_lock. vis_hash_lock also
used to protect recv_list, so we now need a new lock to protect that
instead of vis_hash_lock.
Also a few checkpatch cleanups.
Reported-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/batman-adv/send.c:137: CHECK: multiple assignments should be avoided
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
This fixes some RT-triggered compile errors and typos.
Signed-off-by: Sven-Thorsten Dietrich <sdietrich@novell.com>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make sure that batman-adv does not process packets before its
initialization is complete. Some sanity checks added to the receiver
function.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
skb_share_check() returns NULL if it can't allocate more memory but
it still frees the skbuff.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vis code takes a copy of the data inside the skbuf if it is interesting
for us, so we always need to release the skbuf.
Reported-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes the bug discovered by Marek Lindner which did not allow
turning on the vis-server before an interface has been added. With this
patch we are using a global atomic variable for activating and
deactiating the vis-server-mode, which can be used before
inserting an interface.
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes a variable that became obsolete since the skb handling
replaced the packet handling thread.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The routing code has 2 sections which warn about ttl exceeded. The
corresponding warnings were identical which makes it hard to debug. In
addition, batman-adv does not need to warn about ttl exceeded in case
we encountered an echo request as this is commonly used to generate
traceroute graphs.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As in other parts of batman-adv, we should not lock while sending a packet but
keep the lock held for as short as possible. Additionally, we should check
whether the interface is active, otherwise batman_if->net_dev might not be
available ...
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code which uses the raw packet sockets was removed. The only related
dependencies are the skb and netdev handling code. This is provided by
NET in Kconfig.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The module now only compiles inside mainline, so remove the comments
about different versions of the kernel it can be used with. Also
update comments about building with debug enabled and how to use the
VIS data now that it no longer natively outputs dot or JSON.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A non-integer changes the aggregation mode. Therefore this patch changes
the behaviour to explicitly check strict_strtoul()'s return code.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since we are now part of mainline, we don't need compat.h to allow
building of the module with old versions of the kernel.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
