For events that are rare, such as referral DNS lookups, it makes limited
sense to have a daemon constantly listening for upcalls on a channel. An
alternative in those cases might simply be to run the app that fills the
cache using call_usermodehelper_exec() and friends.
The following patch allows the cache_detail to specify alternative upcall
mechanisms for these particular cases.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In write_failover_ip(), replace the sscanf() with a call to the common
sunrpc.ko presentation address parser.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The sequence operation is not cached; always encode the sequence operation on
a replay from the slot table and session values. This simplifies the sessions
replay logic in nfsd4_proc_compound.
If this is a replay of a compound that was specified not to be cached, return
NFS4ERR_RETRY_UNCACHED_REP.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This function is only used for SEQUENCE replay.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of trying to share the generic 4.1 reply cache code for the
CREATE_SESSION reply cache, it's simpler to handle CREATE_SESSION
separately.
The nfs41 single slot clientid DRC holds the results of create session
processing. CREATE_SESSION can be preceeded by a SEQUENCE operation
(an embedded CREATE_SESSION) and the create session single slot cache must be
maintained. nfsd4_replay_cache_entry() and nfsd4_store_cache_entry() do not
implement the replay of an embedded CREATE_SESSION.
The clientid DRC slot does not need the inuse, cachethis or other fields that
the multiple slot session cache uses. Replace the clientid DRC cache struct
nfs4_slot cache with a new nfsd4_clid_slot cache. Save the xdr struct
nfsd4_create_session into the cache at the end of processing, and on a replay,
replace the struct for the replay request with the cached version all while
under the state lock.
nfsd4_proc_compound will handle both the solo and embedded CREATE_SESSION case
via the normal use of encode_operation.
Errors that do not change the create session cache:
A create session NFS4ERR_STALE_CLIENTID error means that a client record
(and associated create session slot) could not be found and therefore can't
be changed. NFSERR_SEQ_MISORDERED errors do not change the slot cache.
All other errors get cached.
Remove the clientid DRC specific check in nfs4svc_encode_compoundres to
put the session only if cstate.session is set which will now always be true.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
For separation of session slot and clientid slot processing.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSD_SLOT_CACHE_SIZE is the size of all encoded operation responses
(excluding the sequence operation) that we want to cache.
For now, keep NFSD_SLOT_CACHE_SIZE at PAGE_SIZE. It will be reduced
when the DRC is changed from page based to memory based.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This fixes a leak which would eventually lock out new clients.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
kmemleak produces the following warning
unreferenced object 0xc9ec02a0 (size 8):
comm "cat", pid 19048, jiffies 730243
backtrace:
[<c01bf970>] create_object+0x100/0x240
[<c01bfadb>] kmemleak_alloc+0x2b/0x60
[<c01bcd4b>] __kmalloc+0x14b/0x270
[<c02fd027>] write_pool_threads+0x87/0x1d0
[<c02fcc08>] nfsctl_transaction_write+0x58/0x70
[<c02fcc6f>] nfsctl_transaction_read+0x4f/0x60
[<c01c2574>] vfs_read+0x94/0x150
[<c01c297d>] sys_read+0x3d/0x70
[<c0102d6b>] sysenter_do_call+0x12/0x32
[<ffffffff>] 0xffffffff
write_pool_threads() only frees nthreads on error paths, in the success case
we leak it.
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The version 4.1 DRC memory limit and tracking variables are server wide and
session specific. Replace struct svc_serv fields with globals.
Stop using the svc_serv sv_lock.
Add a spinlock to serialize access to the DRC limit management variables which
change on session creation and deletion (usage counter) or (future)
administrative action to adjust the total DRC memory limit.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
ACL in operations 'open' and 'create' is decoded but never be used.
It should be set as the initial ACL for the object according to RFC3530.
If error occurs when setting the ACL, just clear the ACL bit in the
returned attr bitmap.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nfsd_open() gets an unrefcounted pointer to the current process's effective
credentials at the top of the function, then calls nfsd_setuser() via
fh_verify() - which may replace and destroy the current process's effective
credentials - and then passes the unrefcounted pointer to dentry_open() - but
the credentials may have been destroyed by this point.
Instead, the value from current_cred() should be passed directly to
dentry_open() as one of its arguments, rather than being cached in a variable.
Possibly fh_verify() should return the creds to use.
This is a regression introduced by
745ca2475a "CRED: Pass credentials through
dentry_open()".
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-and-Verified-By: Steve Dickson <steved@redhat.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-2.6.31' of git://fieldses.org/git/linux-nfsd: (60 commits)
SUNRPC: Fix the TCP server's send buffer accounting
nfsd41: Backchannel: minorversion support for the back channel
nfsd41: Backchannel: cleanup nfs4.0 callback encode routines
nfsd41: Remove ip address collision detection case
nfsd: optimise the starting of zero threads when none are running.
nfsd: don't take nfsd_mutex twice when setting number of threads.
nfsd41: sanity check client drc maxreqs
nfsd41: move channel attributes from nfsd4_session to a nfsd4_channel_attr struct
NFS: kill off complicated macro 'PROC'
sunrpc: potential memory leak in function rdma_read_xdr
nfsd: minor nfsd_vfs_write cleanup
nfsd: Pull write-gathering code out of nfsd_vfs_write
nfsd: track last inode only in use_wgather case
sunrpc: align cache_clean work's timer
nfsd: Use write gathering only with NFSv2
NFSv4: kill off complicated macro 'PROC'
NFSv4: do exact check about attribute specified
knfsd: remove unreported filehandle stats counters
knfsd: fix reply cache memory corruption
knfsd: reply cache cleanups
...
Prepare to share backchannel code with NFSv4.1.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[nfsd41: use nfsd4_cb_sequence for callback minorversion]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Mimic the client and prepare to share the back channel xdr with NFSv4.1.
Bump the number of operations in each encode routine, then backfill the
number of operations.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Verified that cthon and pynfs exchange id tests pass (except for the
two expected fails: EID8 and EID50)
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently, if we ask to set then number of nfsd threads to zero when
there are none running, we set up all the sockets and register the
service, and then tear it all down again.
This is pointless.
So detect that case and exit promptly.
(also remove an assignment to 'error' which was never used.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Currently when we write a number to 'threads' in nfsdfs,
we take the nfsd_mutex, update the number of threads, then take the
mutex again to read the number of threads.
Mostly this isn't a big deal. However if we are write '0', and
portmap happens to be dead, then we can get unpredictable behaviour.
If the nfsd threads all got killed quickly and the last thread is
waiting for portmap to respond, then the second time we take the mutex
we will block waiting for the last thread.
However if the nfsd threads didn't die quite that fast, then there
will be no contention when we try to take the mutex again.
Unpredictability isn't fun, and waiting for the last thread to exit is
pointless, so avoid taking the lock twice.
To achieve this, get nfsd_svc return a non-negative number of active
threads when not returning a negative error.
Signed-off-by: NeilBrown <neilb@suse.de>
Ensure the client requested maximum requests are between 1 and
NFSD_MAX_SLOTS_PER_SESSION
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
the change is valid for both the forechannel and the backchannel (currently dummy)
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
kill off obscure macro 'PROC' of NFSv2&3 in order to make the code more clear.
Among other things, this makes it simpler to grep for callers of these
functions--something which has frequently caused confusion among nfs
developers.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no need to check host_err >= 0 every time here when we could
check host_err < 0 once, following the usual kernel style.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This is a relatively self-contained piece of code that handles a special
case--move it to its own function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Updating last_ino and last_dev probably isn't useful in the !use_wgather
case.
Also remove some pointless ifdef'd-out code.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSv3 and above can use unstable writes whenever they are sending more
than one write, rather than relying on the flaky write gathering
heuristics. More often than not, write gathering is currently getting it
wrong when the NFSv3 clients are sending a single write with FILE_SYNC
for efficiency reasons.
This patch turns off write gathering for NFSv3/v4, and ensures that
it only applies to the one case that can actually benefit: namely NFSv2.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields wrote:
...
> (This is extremely confusing code to track down: note that
> proc->pc_decode is set to nfs4svc_decode_compoundargs() by the PROC()
> macro at the end of fs/nfsd/nfs4proc.c. Which means, for example, that
> grepping for nfs4svc_decode_compoundargs() gets you nowhere. Patches to
> kill off that macro would be welcomed....)
the macro 'PROC' is complicated and obscure, it had better
be killed off in order to make the code more clear.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Server should return NFS4ERR_ATTRNOTSUPP if an attribute specified is
not supported in current environment.
Operations CREATE, NVERIFY, OPEN, SETATTR and VERIFY should do this check.
This bug is found when do newpynfs tests. The names of the tests that failed
are following:
CR12 NVF7a NVF7b NVF7c NVF7d NVF7f NVF7r NVF7s
OPEN15 VF7a VF7b VF7c VF7d VF7f VF7r VF7s
Add function do_check_fattr() to do exact check:
1, Check attribute specified is supported by the NFSv4 server or not.
2, Check FATTR4_WORD0_ACL & FATTR4_WORD0_FS_LOCATIONS are supported
in current environment or not.
3, Check attribute specified is writable or not.
step 1 and 3 are done in function nfsd4_decode_fattr() but removed
to this function now.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
An nfsd exported file is opened/closed by the kernel causing the
integrity imbalance message.
Before a file is opened, there normally is permission checking, which
is done in inode_permission(). However, as integrity checking requires
a dentry and mount point, which is not available in inode_permission(),
the integrity (permission) checking must be called separately.
In order to detect any missing integrity checking calls, we keep track
of file open/closes. ima_path_check() increments these counts and
does the integrity (permission) checking. As a result, the number of
calls to ima_path_check()/ima_file_free() should be balanced. An extra
call to fput(), indicates the file could have been accessed without first
calling ima_path_check().
In nfsv3 permission checking is done once, followed by multiple reads,
which do an open/close for each read. The integrity (permission) checking
call should be in nfsd_permission() after the inode_permission() call, but
as there is no correlation between the number of permission checking and
open calls, the integrity checking call should not increment the counters,
but defer it to when the file is actually opened.
This patch adds:
- integrity (permission) checking for nfsd exported files in nfsd_permission().
- a call to increment counts for files opened by nfsd.
This patch has been updated to return the nfs error types.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Commit 'Short write in nfsd becomes a full write to the client'
(31dec2538e) broken the sync write.
With the following commands to reproduce:
$ mount -t nfs -o sync 192.168.0.21:/nfsroot /mnt
$ cd /mnt
$ echo aaaa > temp.txt
Then nfs client is hung up.
In SYNC mode the server alaways return the write count 0 to the
client. This is because the value of host_err in nfsd_vfs_write()
will be overwrite in SYNC mode by 'host_err=nfsd_sync(file);',
and then we return host_err(which is now 0) as write count.
This patch fixed the problem.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The file nfsfh.c contains two static variables nfsd_nr_verified and
nfsd_nr_put. These are counters which are incremented as a side
effect of the fh_verify() fh_compose() and fh_put() operations,
i.e. at least twice per NFS call for any non-trivial workload.
Needless to say this makes the cacheline that contains them (and any
other innocent victims) a very hot contention point indeed under high
call-rate workloads on multiprocessor NFS server. It also turns out
that these counters are not used anywhere. They're not reported to
userspace, they're not used in logic, they're not even exported from
the object file (let alone the module). All they do is waste CPU time.
So this patch removes them.
Tests on a 16 CPU Altix A4700 with 2 10gige Myricom cards, configured
separately (no bonding). Workload is 640 client threads doing directory
traverals with random small reads, from server RAM.
Before
======
Kernel profile:
% cumulative self self total
time samples samples calls 1/call 1/call name
6.05 2716.00 2716.00 30406 0.09 1.02 svc_process
4.44 4706.00 1990.00 1975 1.01 1.01 spin_unlock_irqrestore
3.72 6376.00 1670.00 1666 1.00 1.00 svc_export_put
3.41 7907.00 1531.00 1786 0.86 1.02 nfsd_ofcache_lookup
3.25 9363.00 1456.00 10965 0.13 1.01 nfsd_dispatch
3.10 10752.00 1389.00 1376 1.01 1.01 nfsd_cache_lookup
2.57 11907.00 1155.00 4517 0.26 1.03 svc_tcp_recvfrom
...
2.21 15352.00 1003.00 1081 0.93 1.00 nfsd_choose_ofc <----
^^^^
Here the function nfsd_choose_ofc() reads a global variable
which by accident happened to be located in the same cacheline as
nfsd_nr_verified.
Call rate:
nullarbor:~ # pmdumptext nfs3.server.calls
...
Thu Dec 13 00:15:27 184780.663
Thu Dec 13 00:15:28 184885.881
Thu Dec 13 00:15:29 184449.215
Thu Dec 13 00:15:30 184971.058
Thu Dec 13 00:15:31 185036.052
Thu Dec 13 00:15:32 185250.475
Thu Dec 13 00:15:33 184481.319
Thu Dec 13 00:15:34 185225.737
Thu Dec 13 00:15:35 185408.018
Thu Dec 13 00:15:36 185335.764
After
=====
kernel profile:
% cumulative self self total
time samples samples calls 1/call 1/call name
6.33 2813.00 2813.00 29979 0.09 1.01 svc_process
4.66 4883.00 2070.00 2065 1.00 1.00 spin_unlock_irqrestore
4.06 6687.00 1804.00 2182 0.83 1.00 nfsd_ofcache_lookup
3.20 8110.00 1423.00 10932 0.13 1.00 nfsd_dispatch
3.03 9456.00 1346.00 1343 1.00 1.00 nfsd_cache_lookup
2.62 10622.00 1166.00 4645 0.25 1.01 svc_tcp_recvfrom
[...]
0.10 42586.00 44.00 74 0.59 1.00 nfsd_choose_ofc <--- HA!!
^^^^
Call rate:
nullarbor:~ # pmdumptext nfs3.server.calls
...
Thu Dec 13 01:45:28 194677.118
Thu Dec 13 01:45:29 193932.692
Thu Dec 13 01:45:30 194294.364
Thu Dec 13 01:45:31 194971.276
Thu Dec 13 01:45:32 194111.207
Thu Dec 13 01:45:33 194999.635
Thu Dec 13 01:45:34 195312.594
Thu Dec 13 01:45:35 195707.293
Thu Dec 13 01:45:36 194610.353
Thu Dec 13 01:45:37 195913.662
Thu Dec 13 01:45:38 194808.675
i.e. about a 5.3% improvement in call rate.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Reviewed-by: David Chinner <dgc@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fix a regression in the reply cache introduced when the code was
converted to use proper Linux lists. When a new entry needs to be
inserted, the case where all the entries are currently being used
by threads is not correctly detected. This can result in memory
corruption and a crash. In the current code this is an extremely
unlikely corner case; it would require the machine to have 1024
nfsd threads and all of them to be busy at the same time. However,
upcoming reply cache changes make this more likely; a crash due to
this problem was actually observed in field.
Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Make REQHASH() an inline function. Rename hash_list to cache_hash.
Fix an obsolete comment.
Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
After 2f9092e102 "Fix i_mutex vs. readdir
handling in nfsd" (and 14f7dd63 "Copy XFS readdir hack into nfsd code"),
an entry may be removed between the first mutex_unlock and the second
mutex_lock. In this case, lookup_one_len() will return a negative
dentry. Check for this case to avoid a NULL dereference.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Cc: stable@kernel.org
Eliminate 56 sparse warnings like this one:
fs/nfsd/nfs4xdr.c:1331:15: warning: obsolete array initializer, use C99 syntax
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The session and slots are allocated all in one piece.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Move this out of a local variable into the nfs4_delegation object in
preparation for making this an async rpc call (at which point we'll need
any state like this in a common object that's preserved across function
calls).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no point in keeping this field around--it's always zero.
(Background: the protocol allows you to tell the client that the file is
about to be truncated, as an optimization to save the client from
writing back dirty pages that will just be discarded. We don't
implement this hint. If we do some day, adding this field back in will
be the least of the work involved.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The nfs4_cb_recall struct is used only in nfs4_delegation, so its
pointer to the containing delegation is unnecessary--we could just use
container_of().
But there's no real reason to have this a separate struct at all--just
move these fields to nfs4_delegation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
I want to use the name for a struct that actually does represent a
single callback.
(Actually, I've never been sure it helps to a separate struct for the
callback information. Some day maybe those fields could just be dumped
into struct nfs4_client. I don't know.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We don't really need a synchronous rpc, and moving to an asynchronous
rpc allows us to do without this extra kthread.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The code is a little simpler, and it should be easier to avoid races, if
we just do all rpc client creation/destruction from nfsd or laundromat
threads and do only the rpc calls themselves asynchronously. The rpc
creation doesn't involve any significant waiting (it doesn't call the
client, for example), so there's no reason not to do this.
Also don't bother destroying the client on failure of the rpc null
probe. We may want to retry the probe later anyway.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We tried to do something overly complicated with the callback rpc
timeouts here. And they're wrong--the result is that by the time a
single callback times out, it's already too late to tell the client
(using the cb_path_down return to RENEW) that the callback is down.
Use a much shorter, simpler timeout.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This setclientid_confirm case should allow the client to change
callbacks, but it currently has a dummy implementation that just turns
off callbacks completely. That dummy implementation isn't completely
correct either, though:
- There's no need to remove any client recovery directory in
this case.
- New clientid confirm verifiers should be generated (and
returned) in setclientid; there's no need to generate a new
one here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Stephen Rothwell said:
"Today's linux-next build (powerpc ppc64_defconfig) produced this new
warning:
fs/nfsd/nfs4state.c: In function 'EXPIRED_STATEID':
fs/nfsd/nfs4state.c:2757: warning: comparison of distinct pointer types lacks a cast
Caused by commit 78155ed75f ("nfsd4:
distinguish expired from stale stateids")."
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
ext4 supports a real NFSv4 change attribute, which is bumped whenever
the ctime would be updated, including times when two updates arrive
within a jiffy of each other. (Note that although ext4 has space for
nanosecond-precision ctime, the real resolution is lower: it actually
uses jiffies as the time-source.) This ensures clients will invalidate
their caches when they need to.
There is some fear that keeping the i_version up-to-date could have
performance drawbacks, so for now it's turned on only by a mount option.
We hope to do something better eventually.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Theodore Tso <tytso@mit.edu>
We don't need comments to tell us these macros are ugly. And we're long
past trying to share any of this code with the BSD's.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: For consistency, handle output buffer size checking in a
other nfsctl functions the same way it's done for write_versions().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
While it's not likely today that there are enough NFS versions to
overflow the output buffer in write_versions(), we should be more
careful about detecting the end of the buffer.
The number of NFS versions will only increase as NFSv4 minor versions
are added.
Note that this API doesn't behave the same as portlist. Here we
attempt to display as many versions as will fit in the buffer, and do
not provide any indication that an overflow would have occurred. I
don't have any good rationale for that.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
While it's not likely a pathname will be longer than
SIMPLE_TRANSACTION_SIZE, we should be more careful about just
plopping it into the output buffer without bounds checking.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Adjust the synopsis of svc_sock_names() to pass in the size of the
output buffer. Add a documenting comment.
This is a cosmetic change for now. A subsequent patch will make sure
the buffer length is passed to one_sock_name(), where the length will
actually be useful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Adjust the synopsis of svc_addsock() to pass in the size of the output
buffer. Add a documenting comment.
This is a cosmetic change for now. A subsequent patch will make sure
the buffer length is passed to one_sock_name(), where the length will
actually be useful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The svc_xprt_names() function can overflow its buffer if it's so near
the end of the passed in buffer that the "name too long" string still
doesn't fit. Of course, it could never tell if it was near the end
of the passed in buffer, since its only caller passes in zero as the
buffer length.
Let's make this API a little safer.
Change svc_xprt_names() so it *always* checks for a buffer overflow,
and change its only caller to pass in the correct buffer length.
If svc_xprt_names() does overflow its buffer, it now fails with an
ENAMETOOLONG errno, instead of trying to write a message at the end
of the buffer. I don't like this much, but I can't figure out a clean
way that's always safe to return some of the names, *and* an
indication that the buffer was not long enough.
The displayed error when doing a 'cat /proc/fs/nfsd/portlist' is
"File name too long".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up.
A couple of years ago, a series of commits, finishing with commit
5680c446, swapped the order of the lockd_up() and svc_addsock() calls
in __write_ports(). At that time lockd_up() needed to know the
transport protocol of the passed-in socket to start a listener on the
same transport protocol.
These days, lockd_up() doesn't take a protocol argument; it always
starts both a UDP and TCP listener. It's now more straightforward to
try the lockd_up() first, then do a lockd_down() if the svc_addsock()
fails.
Careful review of this code shows that the svc_sock_names() call is
used only to close the just-opened socket in case lockd_up() fails.
So it is no longer needed if lockd_up() is done first.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Refactor transport name listing out of __write_ports() to
make it easier to understand and maintain.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
User space must call listen(3) on SOCK_STREAM sockets passed into
/proc/fs/nfsd/portlist, otherwise that listener is ignored. Document
this.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Refactor the socket creation logic out of __write_ports() to
make it easier to understand and maintain.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Refactor the socket closing logic out of __write_ports() to
make it easier to understand and maintain.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Refactor transport addition out of __write_ports() to make
it easier to understand and maintain.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Refactor transport removal out of __write_ports() to make it
easier to understand and maintain.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If we encode the time of client creation into the stateid instead of the
time of server boot, then we can determine whether that stateid is from
a previous instance of the a server, or from a client that has expired,
and return an appropriate error to the client.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Commit 14f7dd63 ("Copy XFS readdir hack into nfsd code") introduced a
bug to generic code which had been extant for a long time in the XFS
version -- it started to call through into lookup_one_len() and hence
into the file systems' ->lookup() methods without i_mutex held on the
directory.
This patch fixes it by locking the directory's i_mutex again before
calling the filldir functions. The original deadlocks which commit
14f7dd63 was designed to avoid are still avoided, because they were due
to fs-internal locking, not i_mutex.
While we're at it, fix the return type of nfsd_buffered_readdir() which
should be a __be32 not an int -- it's an NFS errno, not a Linux errno.
And return nfserrno(-ENOMEM) when allocation fails, not just -ENOMEM.
Sparse would have caught that, if it wasn't so busy bitching about
__cold__.
Commit 05f4f678 ("nfsd4: don't do lookup within readdir in recovery
code") introduced a similar problem with calling lookup_one_len()
without i_mutex, which this patch also addresses. To fix that, it was
necessary to fix the called functions so that they expect i_mutex to be
held; that part was done by J. Bruce Fields.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Umm-I-can-live-with-that-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Tested-by: J. Bruce Fields <bfields@citi.umich.edu>
LKML-Reference: <8036.1237474444@jrobl>
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
AFAICS, we have a subtle bug there: if we have crossed mountpoint
*and* it got mount --move'd away, we'll be holding only one
reference to fs containing dentry - exp->ex_path.mnt. IOW, we
ought to dput() before exp_put().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux: (81 commits)
nfsd41: define nfsd4_set_statp as noop for !CONFIG_NFSD_V4
nfsd41: define NFSD_DRC_SIZE_SHIFT in set_max_drc
nfsd41: Documentation/filesystems/nfs41-server.txt
nfsd41: CREATE_EXCLUSIVE4_1
nfsd41: SUPPATTR_EXCLCREAT attribute
nfsd41: support for 3-word long attribute bitmask
nfsd: dynamically skip encoded fattr bitmap in _nfsd4_verify
nfsd41: pass writable attrs mask to nfsd4_decode_fattr
nfsd41: provide support for minor version 1 at rpc level
nfsd41: control nfsv4.1 svc via /proc/fs/nfsd/versions
nfsd41: add OPEN4_SHARE_ACCESS_WANT nfs4_stateid bmap
nfsd41: access_valid
nfsd41: clientid handling
nfsd41: check encode size for sessions maxresponse cached
nfsd41: stateid handling
nfsd: pass nfsd4_compound_state* to nfs4_preprocess_{state,seq}id_op
nfsd41: destroy_session operation
nfsd41: non-page DRC for solo sequence responses
nfsd41: Add a create session replay cache
nfsd41: create_session operation
...
Fixes the following compiler error:
fs/nfsd/nfssvc.c: In function 'set_max_drc':
fs/nfsd/nfssvc.c:240: error: 'NFSD_DRC_SIZE_SHIFT' undeclared
CONFIG_NFSD_V4 is not set
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the CREATE_EXCLUSIVE4_1 open mode conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
This mode allows the client to atomically create a file
if it doesn't exist while setting some of its attributes.
It must be implemented if the server supports persistent
reply cache and/or pnfs.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Also, use client minorversion to generate supported attrs
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
_nfsd4_verify currently skips 3 words from the encoded buffer begining.
With support for 3-word attr bitmaps in nfsd41, nfsd4_encode_fattr
may encode 1, 2, or 3 words, and not always 2 as it used to be, hence
we need to find out where to skip using the encoded bitmap length.
Note: This patch may be applied over pre-nfsd41 nfsd.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Support enabling and disabling nfsv4.1 via /proc/fs/nfsd/versions
by writing the strings "+4.1" or "-4.1" correspondingly.
Use user mode nfs-utils (rpc.nfsd option) to enable.
This will allow us to get rid of CONFIG_NFSD_V4_1
[nfsd41: disable support for minorversion by default]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Separate the access bits from the want bits and enable __set_bit to
work correctly with st_access_bmap.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
For nfs41, the open share flags are used also for
delegation "wants" and "signals". Check that they are valid.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Extract the clientid from sessionid to set the op_clientid on open.
Verify that the clid for other stateful ops is zero for minorversion != 0
Do all other checks for stateful ops without sessions.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixed whitespace indent]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from nfsd4_open]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Calculate the space the compound response has taken after encoding the current
operation.
pad: add on 8 bytes for the next operation's op_code and status so that
there is room to cache a failure on the next operation.
Compare this length to the session se_fmaxresp_cached and return
nfserr_rep_too_big_to_cache if the length is too large.
Our se_fmaxresp_cached will always be a multiple of PAGE_SIZE, and so
will be at least a page and will therefore hold the xdr_buf head.
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfsd41: non-page DRC for solo sequence responses]
[fixed nfsd4_check_drc_limit cosmetics]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use cstate session in nfsd4_check_drc_limit]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When sessions are used, stateful operation sequenceid and stateid handling
are not used. When sessions are used, on the first open set the seqid to 1,
mark state confirmed and skip seqid processing.
When sessionas are used the stateid generation number is ignored when it is zero
whereas without sessions bad_stateid or stale stateid is returned.
Add flags to propagate session use to all stateful ops and down to
check_stateid_generation.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfsd4_has_session should return a boolean, not u32]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: pass nfsd4_compoundres * to nfsd4_process_open1]
[nfsd41: calculate HAS_SESSION in nfs4_preprocess_stateid_op]
[nfsd41: calculate HAS_SESSION in nfs4_preprocess_seqid_op]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently we only use cstate->current_fh,
will also be used by nfsd41 code.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the destory_session operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
[use sessionid_lock spin lock]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
A session inactivity time compound (lease renewal) or a compound where the
sequence operation has sa_cachethis set to FALSE do not require any pages
to be held in the v4.1 DRC. This is because struct nfsd4_slot is already
caching the session information.
Add logic to the nfs41 server to not cache response pages for solo sequence
responses.
Return nfserr_replay_uncached_rep on the operation following the sequence
operation when sa_cachethis is FALSE.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use cstate session in nfsd4_replay_cache_entry]
[nfsd41: rename nfsd4_no_page_in_cache]
[nfsd41 rename nfsd4_enc_no_page_replay]
[nfsd41 nfsd4_is_solo_sequence]
[nfsd41 change nfsd4_not_cached return]
Signed-off-by: Andy Adamson <andros@netapp.com>
[changed return type to bool]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 drop parens in nfsd4_is_solo_sequence call]
Signed-off-by: Andy Adamson <andros@netapp.com>
[changed "== 0" to "!"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Replace the nfs4_client cl_seqid field with a single struct nfs41_slot used
for the create session replay cache.
The CREATE_SESSION slot sets the sl_session pointer to NULL. Otherwise, the
slot and it's replay cache are used just like the session slots.
Fix unconfirmed create_session replay response by initializing the
create_session slot sequence id to 0.
A future patch will set the CREATE_SESSION cache when a SEQUENCE operation
preceeds the CREATE_SESSION operation. This compound is currently only cached
in the session slot table.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: revert portion of nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netpp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the create_session operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
Look up the client id (generated by the server on exchange_id,
given by the client on create_session).
If neither a confirmed or unconfirmed client is found
then the client id is stale
If a confirmed cilent is found (i.e. we already received
create_session for it) then compare the sequence id
to determine if it's a replay or possibly a mis-ordered rpc.
If the seqid is in order, update the confirmed client seqid
and procedd with updating the session parameters.
If an unconfirmed client_id is found then verify the creds
and seqid. If both match move the client id to confirmed state
and proceed with processing the create_session.
Currently, we do not support persistent sessions, and RDMA.
alloc_init_session generates a new sessionid and creates
a session structure.
NFSD_PAGES_PER_SLOT is used for the max response cached calculation, and for
the counting of DRC pages using the hard limits set in struct srv_serv.
A note on NFSD_PAGES_PER_SLOT:
Other patches in this series allow for NFSD_PAGES_PER_SLOT + 1 pages to be
cached in a DRC slot when the response size is less than NFSD_PAGES_PER_SLOT *
PAGE_SIZE but xdr_buf pages are used. e.g. a READDIR operation will encode a
small amount of data in the xdr_buf head, and then the READDIR in the xdr_buf
pages. So, the hard limit calculation use of pages by a session is
underestimated by the number of cached operations using the xdr_buf pages.
Yet another patch caches no pages for the solo sequence operation, or any
compound where cache_this is False. So the hard limit calculation use of
pages by a session is overestimated by the number of these operations in the
cache.
TODO: improve resource pre-allocation and negotiate session
parameters accordingly. Respect and possibly adjust
backchannel attributes.
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
[nfsd41: remove headerpadsz from channel attributes]
Our client and server only support a headerpadsz of 0.
[nfsd41: use DRC limits in fore channel init]
[nfsd41: do not change CREATE_SESSION back channel attrs]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[use sessionid_lock spin lock]
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from alloc_init_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[simplify nfsd4_encode_create_session error handling]
[nfsd41: fix comment style in init_forechannel_attrs]
[nfsd41: allocate struct nfsd4_session and slot table in one piece]
[nfsd41: no need to INIT_LIST_HEAD in alloc_init_session just prior to list_add]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Replay a request in nfsd4_sequence.
Add a minorversion to struct nfsd4_compound_state.
Pass the current slot to nfs4svc_encode_compound res via struct
nfsd4_compoundres to set an NFSv4.1 DRC entry.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use cstate session in nfs4svc_encode_compoundres]
[nfsd41 replace nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Use no more than 1/128th of the number of free pages at nfsd startup for the
v4.1 DRC.
This is an arbitrary default which should probably end up under the control
of an administrator.
Signed-off-by: Andy Adamson <andros@netapp.com>
[moved added fields in struct svc_serv under CONFIG_NFSD_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[fix set_max_drc calculation of sv_drc_max_pages]
[moved NFSD_DRC_SIZE_SHIFT's declaration up in header file]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cache all the result pages, including the rpc header in rq_respages[0],
for a request in the slot table cache entry.
Cache the statp pointer from nfsd_dispatch which points into rq_respages[0]
just past the rpc header. When setting a cache entry, calculate and save the
length of the nfs data minus the rpc header for rq_respages[0].
When replaying a cache entry, replace the cached rpc header with the
replayed request rpc result header, unless there is not enough room in the
cached results first page. In that case, use the cached rpc header.
The sessions fore channel maxresponse size cached is set to NFSD_PAGES_PER_SLOT
* PAGE_SIZE. For compounds we are cacheing with operations such as READDIR
that use the xdr_buf->pages to hold data, we choose to cache the extra page of
data rather than copying data from xdr_buf->pages into the xdr_buf->head page.
[nfsd41: limit cache to maxresponsesize_cached]
[nfsd41: mv nfsd4_set_statp under CONFIG_NFSD_V4_1]
[nfsd41: rename nfsd4_move_pages]
[nfsd41: rename page_no variable]
[nfsd41: rename nfsd4_set_cache_entry]
[nfsd41: fix nfsd41_copy_replay_data comment]
[nfsd41: add to nfsd4_set_cache_entry]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Andy Adamson<andros@netapp.com>
[nfsd41: do not verify nfserr_sequence_pos for minorversion 0]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the sequence operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
Check for stale clientid (as derived from the sessionid).
Enforce slotid range and exactly-once semantics using
the slotid and seqid.
If everything went well renew the client lease and
mark the slot INPROGRESS.
Add a struct nfsd4_slot pointer to struct nfsd4_compound_state.
To be used for sessions DRC replay.
[nfsd41: rename sequence catchthis to cachethis]
Signed-off-by: Andy Adamson<andros@netapp.com>
[pulled some code to set cstate->slot from "nfsd DRC logic"]
[use sessionid_lock spin lock]
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd: add a struct nfsd4_slot pointer to struct nfsd4_compound_state]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: add nfsd4_session pointer to nfsd4_compound_state]
[nfsd41: set cstate session]
[nfsd41: use cstate session in nfsd4_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[simplify nfsd4_encode_sequence error handling]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We need to distinguish between client names provided by NFSv4.0 clients
SETCLIENTID and those provided by NFSv4.1 via EXCHANGE_ID when looking
up the clientid by string.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfsd41: use boolean values for use_exchange_id argument]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: simplify match_clientid_establishment logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the exchange_id operation confoming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-28
Based on the client provided name, hash a client id.
If a confirmed one is found, compare the op's creds and
verifier. If the creds match and the verifier is different
then expire the old client (client re-incarnated), otherwise,
if both match, assume it's a replay and ignore it.
If an unconfirmed client is found, then copy the new creds
and verifer if need update, otherwise assume replay.
The client is moved to a confirmed state on create_session.
In the nfs41 branch set the exchange_id flags to
EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_SUPP_MOVED_REFER
(pNFS is not supported, Referrals are supported,
Migration is not.).
Address various scenarios from section 18.35 of the spec:
1. Check for EXCHGID4_FLAG_UPD_CONFIRMED_REC_A and set
EXCHGID4_FLAG_CONFIRMED_R as appropriate.
2. Return error codes per 18.35.4 scenarios.
3. Update client records or generate new client ids depending on
scenario.
Note: 18.35.4 case 3 probably still needs revisiting. The handling
seems not quite right.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamosn <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use utsname for major_id (and copy to server_scope)]
[nfsd41: fix handling of various exchange id scenarios]
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: reverse use of EXCHGID4_INVAL_FLAG_MASK_A]
[simplify nfsd4_encode_exchange_id error handling]
[nfsd41: embed an xdr_netobj in nfsd4_exchange_id]
[nfsd41: return nfserr_serverfault for spa_how == SP4_MACH_CRED]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Define nfsd41_dec_ops vector and add it to nfsd4_minorversion for
minorversion 1.
Note: nfsd4_enc_ops vector is shared for v4.0 and v4.1
since we don't need to filter out obsolete ops as this is
done in the decoding phase.
exchange_id, create_session, destroy_session, and sequence ops are
implemented as stubs returning nfserr_opnotsupp at this stage.
[was nfsd41: xdr stubs]
[get rid of CONFIG_NFSD_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Simple sessionid hashing using its monotonically increasing sequence number.
Locking considerations:
sessionid_hashtbl access is controlled by the sessionid_lock spin lock.
It must be taken for insert, delete, and lookup.
nfsd4_sequence looks up the session id and if the session is found,
it calls nfsd4_get_session (still under the sessionid_lock).
nfsd4_destroy_session calls nfsd4_put_session after unhashing
it, so when the session's kref reaches zero it's going to get freed.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[we don't use a prime for sessionid hash table size]
[use sessionid_lock spin lock]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch provides basic data structures representing the nfs41
sessions and slots, plus helpers for keeping a reference count
on the session and freeing it.
Note that our server only support a headerpadsz of 0 and
it ignores backchannel attributes at the moment.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: remove headerpadsz from channel attributes]
[nfsd41: embed nfsd4_channel in nfsd4_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use bool inuse for slot state]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41 remove sl_session from nfsd4_slot]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
On an NFSv4.1 server cache miss that causes an upcall, NFS4ERR_DELAY will be
returned. It is up to the NFSv4.1 client to resend only the operations that
have not been processed.
Initialize rq_usedeferral to 1 in svc_process(). It sill be turned off in
nfsd4_proc_compound() only when NFSv4.1 Sessions are used.
Note: this isn't an adequate solution on its own. It's acceptable as a way
to get some minimal 4.1 up and working, but we're going to have to find a
way to avoid returning DELAY in all common cases before 4.1 can really be
considered ready.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: reverse rq_nodeferral negative logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[sunrpc: initialize rq_usedeferral]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Remove two unneeded exports and make two symbols static in fs/mpage.c
Cleanup after commit 585d3bc06f
Trim includes of fdtable.h
Don't crap into descriptor table in binfmt_som
Trim includes in binfmt_elf
Don't mess with descriptor table in load_elf_binary()
Get rid of indirect include of fs_struct.h
New helper - current_umask()
check_unsafe_exec() doesn't care about signal handlers sharing
New locking/refcounting for fs_struct
Take fs_struct handling to new file (fs/fs_struct.c)
Get rid of bumping fs_struct refcount in pivot_root(2)
Kill unsharing fs_struct in __set_personality()
Pure code move; two new helper functions for nfsd and daemonize
(unshare_fs_struct() and daemonize_fs_struct() resp.; for now -
the same code as used to be in callers). unshare_fs_struct()
exported (for nfsd, as copy_fs_struct()/exit_fs() used to be),
copy_fs_struct() and exit_fs() don't need exports anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the allocation of struct nfsd4_compound_state.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since an RPC service listener's protocol family is specified now via
svc_create_xprt(), it no longer needs to be passed to svc_create() or
svc_create_pooled(). Remove that argument from the synopsis of those
functions, and remove the sv_family field from the svc_serv struct.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The sv_family field is going away. Pass a protocol family argument to
svc_create_xprt() instead of extracting the family from the passed-in
svc_serv struct.
Again, as this is a listener socket and not an address, we make this
new argument an "int" protocol family, instead of an "sa_family_t."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make sure port value read from user space by write_ports is valid before
passing it to svc_find_xprt(). If it wasn't, the writer would get ENOENT
instead of EINVAL.
Noticed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: (27 commits)
ext2: Zero our b_size in ext2_quota_read()
trivial: fix typos/grammar errors in fs/Kconfig
quota: Coding style fixes
quota: Remove superfluous inlines
quota: Remove uppercase aliases for quota functions.
nfsd: Use lowercase names of quota functions
jfs: Use lowercase names of quota functions
udf: Use lowercase names of quota functions
ufs: Use lowercase names of quota functions
reiserfs: Use lowercase names of quota functions
ext4: Use lowercase names of quota functions
ext3: Use lowercase names of quota functions
ext2: Use lowercase names of quota functions
ramfs: Remove quota call
vfs: Use lowercase names of quota functions
quota: Remove dqbuf_t and other cleanups
quota: Remove NODQUOT macro
quota: Make global quota locks cacheline aligned
quota: Move quota files into separate directory
ext4: quota reservation for delayed allocation
...
* 'bkl-removal' of git://git.lwn.net/linux-2.6:
Rationalize fasync return values
Move FASYNC bit handling to f_op->fasync()
Use f_lock to protect f_flags
Rename struct file->f_ep_lock
Use lowercase names of quota functions instead of old uppercase ones.
CC: bfields@fieldses.org
CC: neilb@suse.de
Signed-off-by: Jan Kara <jack@suse.cz>
There is an inconsistency seen in the behaviour of nfs compared to other local
filesystems on linux when changing owner or group of a directory. If the
directory has SUID/SGID flags set, on changing owner or group on the directory,
the flags are stripped off on nfs. These flags are maintained on other
filesystems such as ext3.
To reproduce on a nfs share or local filesystem, run the following commands
mkdir test; chmod +s+g test; chown user1 test; ls -ld test
On the nfs share, the flags are stripped and the output seen is
drwxr-xr-x 2 user1 root 4096 Feb 23 2009 test
On other local filesystems(ex: ext3), the flags are not stripped and the output
seen is
drwsr-sr-x 2 user1 root 4096 Feb 23 13:57 test
chown_common() called from sys_chown() will only strip the flags if the inode is
not a directory.
static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
{
..
if (!S_ISDIR(inode->i_mode))
newattrs.ia_valid |=
ATTR_KILL_SUID | ATTR_KILL_SGID | ATTR_KILL_PRIV;
..
}
See: http://www.opengroup.org/onlinepubs/7990989775/xsh/chown.html
"If the path argument refers to a regular file, the set-user-ID (S_ISUID) and
set-group-ID (S_ISGID) bits of the file mode are cleared upon successful return
from chown(), unless the call is made by a process with appropriate privileges,
in which case it is implementation-dependent whether these bits are altered. If
chown() is successfully invoked on a file that is not a regular file, these
bits may be cleared. These bits are defined in <sys/stat.h>."
The behaviour as it stands does not appear to violate POSIX. However the
actions performed are inconsistent when comparing ext3 and nfs.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The spec allows clients to change ip address, so we shouldn't be
requiring that setclientid always come from the same address. For
example, a client could reboot and get a new dhcpd address, but still
present the same clientid to the server. In that case the server should
revoke the client's previous state and allow it to continue, instead of
(as it currently does) returning a CLID_INUSE error.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add /proc/fs/nfsd/pool_stats to export to userspace various
statistics about the operation of rpc server thread pools.
This patch is based on a forward-ported version of
knfsd-add-pool-thread-stats which has been shipping in the SGI
"Enhanced NFS" product since 2006 and which was previously
posted:
http://article.gmane.org/gmane.linux.nfs/10375
It has also been updated thus:
* moved EXPORT_SYMBOL() to near the function it exports
* made the new struct struct seq_operations const
* used SEQ_START_TOKEN instead of ((void *)1)
* merged fix from SGI PV 990526 "sunrpc: use dprintk instead of
printk in svc_pool_stats_*()" by Harshula Jayasuriya.
* merged fix from SGI PV 964001 "Crash reading pool_stats before
nfsds are started".
Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Harshula Jayasuriya <harshula@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Stop gathering the data that feeds the 'th' line in /proc/net/rpc/nfsd
because the questionable data provided is not worth the scalability
impact of calculating it. Instead, always report zeroes. The current
approach suffers from three major issues:
1. update_thread_usage() increments buckets by call service
time or call arrival time...in jiffies. On lightly loaded
machines, call service times are usually < 1 jiffy; on
heavily loaded machines call arrival times will be << 1 jiffy.
So a large portion of the updates to the buckets are rounded
down to zero, and the histogram is undercounting.
2. As seen previously on the nfs mailing list, the format in which
the histogram is presented is cryptic, difficult to explain,
and difficult to use.
3. Updating the histogram requires taking a global spinlock and
dirtying the global variables nfsd_last_call, nfsd_busy, and
nfsdstats *twice* on every RPC call, which is a significant
scaling limitation.
Testing on a 4 CPU 4 NIC Altix using 4 IRIX clients each doing
1K streaming reads at full line rate, shows the stats update code
(inlined into nfsd()) takes about 1.7% of each CPU. This patch drops
the contribution from nfsd() into the profile noise.
This patch is a forward-ported version of knfsd-remove-nfsd-threadstats
which has been shipping in the SGI "Enhanced NFS" product since 2006.
In that time, exactly one customer has noticed that the threadstats
were missing. It has been previously posted:
http://article.gmane.org/gmane.linux.nfs/10376
and more recently requested to be posted again.
Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The main nfsd code was recently modified to no longer do lookups from
withing the readdir callback, to avoid locking problems on certain
filesystems.
This (rather hacky, and overdue for replacement) NFSv4 recovery code has
the same problem. Fix it to build up a list of names (instead of
dentries) and do the lookups afterwards.
Reported symptoms were a deadlock in the xfs code (called from
nfsd4_recdir_load), with /var/lib/nfs on xfs.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reported-by: David Warren <warren@atmos.washington.edu>
Currently putpubfh returns NFSERR_OPNOTSUPP, which isn't actually
allowed for v4. The right error is probably NFSERR_NOTSUPP.
But let's just implement it; though rarely seen, it can be used by
Solaris (with a special mount option), is mandated by the rfc, and is
trivial for us to support.
Thanks to Yang Hongyang for pointing out the original problem, and to
Mike Eisler, Tom Talpey, Trond Myklebust, and Dave Noveck for further
argument....
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If a filesystem being written to via NFS returns a short write count
(as opposed to an error) to nfsd, nfsd treats that as a success for
the entire write, rather than the short count that actually succeeded.
For example, given a 8192 byte write, if the underlying filesystem
only writes 4096 bytes, nfsd will ack back to the nfs client that all
8192 bytes were written. The nfs client does have retry logic for
short writes, but this is never called as the client is told the
complete write succeeded.
There are probably other ways it could happen, but in my case it
happened with a fuse (filesystem in userspace) filesystem which can
rather easily have a partial write.
Here is a patch to properly return the short write count to the
client.
Signed-off-by: David Shaw <dshaw@jabberwocky.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Thanks for Bill Baker at sun.com for catching this
at Connectathon 2009.
This bug was introduced in 2.6.27
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The errors returned aren't used. Just return 0 and make them available
to a dprintk(). Also, consistently use -ERRNO errors instead of nfs
errors.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
As part of reducing the scope of the client_mutex, and in order to
remove the need for mutexes from the callback code (so that callbacks
can be done as asynchronous rpc calls), move manipulations of the
file_hashtable under the recall_lock.
Update the relevant comments while we're here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Alexandros Batsakis <batsakis@netapp.com>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
Since free_client() is guaranteed to only be called once, and to only
touch the client structure itself (not any common data structures), it
has no need for the state lock.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Alexandros Batsakis <batsakis@netapp.com>
Previous cleanup reveals an obvious (though harmless) bug: when
delegreturn gets a stateid that isn't for a delegation, it should return
an error rather than doing nothing.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Delegreturn is enough a special case for preprocess_stateid_op to
warrant just open-coding it in delegreturn.
There should be no change in behavior here; we're just reshuffling code.
Thanks to Yang Hongyang for catching a critical typo.
Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
I can't recall ever seeing these printk's used to debug a problem. I'll
happily put them back if we see a case where they'd be useful. (Though
if we do that the find_XXX() errors would probably be better
reported in find_XXX() functions themselves.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Note that we exit this first big "if" with stp == NULL if and only if we
took the first branch; therefore, the second "if" is redundant, and we
can just combine the two, simplifying the logic.
Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
sometimes HPUX nfs client sends a create request to linux nfs server(v2/v3).
the dump of the request is like:
obj_attributes
mode: value follows
set_it: value follows (1)
mode: 00
uid: no value
set_it: no value (0)
gid: value follows
set_it: value follows (1)
gid: 8030
size: value follows
set_it: value follows (1)
size: 0
atime: don't change
set_it: don't change (0)
mtime: don't change
set_it: don't change (0)
note that mode is 00(havs no rwx privilege even for the owner) and it requires
to set size to 0.
as current nfsd(v2/v3) implementation, the server does mainly 2 steps:
1) creates the file in mode specified by calling vfs_create().
2) sets attributes for the file by calling nfsd_setattr().
at step 2), it finally calls file system specific setattr() function which may
fail when checking permission because changing size needs WRITE privilege but
it has none since mode is 000.
for this case, a new file created, we may simply ignore the request of
setting size to 0, so that WRITE privilege is not needed and the open
succeeds.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
--
vfs.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
not having the state locked before putting the client/delegation causes a bug.
Also removed the comment from the function header about the state being already locked
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The use of |= is confusing--the bitmask is always initialized to zero in
this case, so we're effectively just doing an assignment here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Enable NFSD only when FILE_LOCKING is enabled, since we don't want to
support NFSD without FILE_LOCKING.
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
MSDOS_SUPER_MAGIC is defined in <linux/magic.h>,
so use MSDOS_SUPER_MAGIC directly.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The caller always knows specifically whether it's releasing a lockowner
or an openowner, and the code is simpler if we use separate functions
(and the apparent recursion is gone).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The flags here attempt to make the code more general, but I find it
actually just adds confusion.
I think it's clearer to separate the logic for the open and lock cases
entirely. And eventually we may want to separate the stateowner and
stateid types as well, as many of the fields aren't shared between the
lock and open cases.
Also move to eliminate forward references.
Start with the stateid's.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
Although this operation is unsupported by our implementation
we still need to provide an encode routine for it to
merely encode its (error) status back in the compound reply.
Thanks for Bill Baker at sun.com for testing with the Sun
OpenSolaris' client, finding, and reporting this bug at
Connectathon 2009.
This bug was introduced in 2.6.27
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Traditionally, changes to struct file->f_flags have been done under BKL
protection, or with no protection at all. This patch causes all f_flags
changes after file open/creation time to be done under protection of
f_lock. This allows the removal of some BKL usage and fixes a number of
longstanding (if microscopic) races.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
nfsd4_lockt does a search for a lockstateowner when building the lock
struct to test. If one is found, it'll set fl_owner to it. Regardless of
whether that happens, it'll also set fl_lmops. Given that this lock is
basically a "lightweight" lock that's just used for checking conflicts,
setting fl_lmops is probably not appropriate for it.
This behavior exposed a bug in DLM's GETLK implementation where it
wasn't clearing out the fields in the file_lock before filling in
conflicting lock info. While we were able to fix this in DLM, it
still seems pointless and dangerous to set the fl_lmops this way
when we may have a NULL lockstateowner.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@pig.fieldses.org>
Since override_creds() took its own reference on new, we need to release
our own reference.
(Note the put_cred on the return value puts the *old* value of
current->creds, not the new passed-in value).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
refactor the nfs4 server lock code to use last_byte_offset
to compute the last byte covered by the lock. Check for overflow
so that the last byte is set to NFS4_MAX_UINT64 if offset + len
wraps around.
Also, use NFS4_MAX_UINT64 for ~(u64)0 where appropriate.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no use for nfs4_cb_null_ops's declaration in fs/nfsd/nfs4callback.c
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When determining the fsid_type in fh_compose(), the setting of the FID
via fsid= export option needs to take precedence over using the UUID
device id.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
A number of nfsd operations depend on the i_mutex to cover more code
than just the fsync, so the approach of 4c728ef583 "add a vfs_fsync
helper" doesn't work for nfsd. Revert the parts of those patches that
touch nfsd.
Note: we can't, however, remove the logic from vfs_fsync that was needed
only for the special case of nfsd, because a vfs_fsync(NULL,...) call
can still result indirectly from a stackable filesystem that was called
by nfsd. (Thanks to Christoph Hellwig for pointing this out.)
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fix a regression in NFSD's permission checking introduced by the credentials
patches. There are two parts to the problem, both in nfsd_setuser():
(1) The return value of set_groups() is -ve if in error, not 0, and should be
checked appropriately. 0 indicates success.
(2) The UID to use for fs accesses is in new->fsuid, not new->uid (which is
0). This causes CAP_DAC_OVERRIDE to always be set, rather than being
cleared if the UID is anything other than 0 after squashing.
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since nfsv4 allows LOCKT without an open, but the ->lock() method is a
file method, we fake up a struct file in the nfsv4 code with just the
fields we need initialized. But we forgot to initialize the file
operations, with the result that LOCKT never results in a call to the
filesystem's ->lock() method (if it exists).
We could just add that one more initialization. But this hack of faking
up a struct file with only some fields initialized seems the kind of
thing that might cause more problems in the future. We should either do
an open and get a real struct file, or make lock-testing an inode (not a
file) method.
This patch does the former.
Reported-by: Marc Eshel <eshel@almaden.ibm.com>
Tested-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Document the NFSD sysctl interface laid out in fs/nfsd/nfsctl.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Instead of open-coding 2049, use the NFS_PORT macro.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Rename recently-added failover functions to match the naming
convention in fs/nfsd/nfsctl.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cksum.data is not freed up in one error case. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Minor cleanup/rewrite of find_stateid. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fsync currently has a fdatawrite/fdatawait pair around the method call,
and a mutex_lock/unlock of the inode mutex. All callers of fsync have
to duplicate this, but we have a few and most of them don't quite get
it right. This patch adds a new vfs_fsync that takes care of this.
It's a little more complicated as usual as ->fsync might get a NULL file
pointer and just a dentry from nfsd, but otherwise gets afile and we
want to take the mapping and file operations from it when it is there.
Notes on the fsync callers:
- ecryptfs wasn't calling filemap_fdatawrite / filemap_fdatawait on the
lower file
- coda wasn't calling filemap_fdatawrite / filemap_fdatawait on the host
file, and returning 0 when ->fsync was missing
- shm wasn't calling either filemap_fdatawrite / filemap_fdatawait nor
taking i_mutex. Now given that shared memory doesn't have disk
backing not doing anything in fsync seems fine and I left it out of
the vfs_fsync conversion for now, but in that case we might just
not pass it through to the lower file at all but just call the no-op
simple_sync_file directly.
[and now actually export vfs_fsync]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We used to have rather schizophrenic set of checks for NULL ->i_op even
though it had been eliminated years ago. You'd need to go out of your
way to set it to NULL explicitly _and_ a bunch of code would die on
such inodes anyway. After killing two remaining places that still
did that bogosity, all that crap can go away.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...
Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
This patch adds server-side support for callbacks other than AUTH_SYS.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The rpc client needs to know the principal that the setclientid was done
as, so it can tell gssd who to authenticate to.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Two principals are involved in krb5 authentication: the target, who we
authenticate *to* (normally the name of the server, like
nfs/server.citi.umich.edu@CITI.UMICH.EDU), and the source, we we
authenticate *as* (normally a user, like bfields@UMICH.EDU)
In the case of NFSv4 callbacks, the target of the callback should be the
source of the client's setclientid call, and the source should be the
nfs server's own principal.
Therefore we allow svcgssd to pass down the name of the principal that
just authenticated, so that on setclientid we can store that principal
name with the new client, to be used later on callbacks.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
If nfsd was shut down before the grace period ended, we could end up
with a freed object still on grace_list. Thanks to Jeff Moyer for
reporting the resulting list corruption warnings.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Differentiate the objective and real subjective credentials from the effective
subjective credentials on a task by introducing a second credentials pointer
into the task_struct.
task_struct::real_cred then refers to the objective and apparent real
subjective credentials of a task, as perceived by the other tasks in the
system.
task_struct::cred then refers to the effective subjective credentials of a
task, as used by that task when it's actually running. These are not visible
to the other tasks in the system.
__task_cred(task) then refers to the objective/real credentials of the task in
question.
current_cred() refers to the effective subjective credentials of the current
task.
prepare_creds() uses the objective creds as a base and commit_creds() changes
both pointers in the task_struct (indeed commit_creds() requires them to be the
same).
override_creds() and revert_creds() change the subjective creds pointer only,
and the former returns the old subjective creds. These are used by NFSD,
faccessat() and do_coredump(), and will by used by CacheFiles.
In SELinux, current_has_perm() is provided as an alternative to
task_has_perm(). This uses the effective subjective context of current,
whereas task_has_perm() uses the objective/real context of the subject.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Inaugurate copy-on-write credentials management. This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.
A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().
With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:
struct cred *new = prepare_creds();
int ret = blah(new);
if (ret < 0) {
abort_creds(new);
return ret;
}
return commit_creds(new);
There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.
To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const. The purpose of this is compile-time
discouragement of altering credentials through those pointers. Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:
(1) Its reference count may incremented and decremented.
(2) The keyrings to which it points may be modified, but not replaced.
The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).
This patch and the preceding patches have been tested with the LTP SELinux
testsuite.
This patch makes several logical sets of alteration:
(1) execve().
This now prepares and commits credentials in various places in the
security code rather than altering the current creds directly.
(2) Temporary credential overrides.
do_coredump() and sys_faccessat() now prepare their own credentials and
temporarily override the ones currently on the acting thread, whilst
preventing interference from other threads by holding cred_replace_mutex
on the thread being dumped.
This will be replaced in a future patch by something that hands down the
credentials directly to the functions being called, rather than altering
the task's objective credentials.
(3) LSM interface.
A number of functions have been changed, added or removed:
(*) security_capset_check(), ->capset_check()
(*) security_capset_set(), ->capset_set()
Removed in favour of security_capset().
(*) security_capset(), ->capset()
New. This is passed a pointer to the new creds, a pointer to the old
creds and the proposed capability sets. It should fill in the new
creds or return an error. All pointers, barring the pointer to the
new creds, are now const.
(*) security_bprm_apply_creds(), ->bprm_apply_creds()
Changed; now returns a value, which will cause the process to be
killed if it's an error.
(*) security_task_alloc(), ->task_alloc_security()
Removed in favour of security_prepare_creds().
(*) security_cred_free(), ->cred_free()
New. Free security data attached to cred->security.
(*) security_prepare_creds(), ->cred_prepare()
New. Duplicate any security data attached to cred->security.
(*) security_commit_creds(), ->cred_commit()
New. Apply any security effects for the upcoming installation of new
security by commit_creds().
(*) security_task_post_setuid(), ->task_post_setuid()
Removed in favour of security_task_fix_setuid().
(*) security_task_fix_setuid(), ->task_fix_setuid()
Fix up the proposed new credentials for setuid(). This is used by
cap_set_fix_setuid() to implicitly adjust capabilities in line with
setuid() changes. Changes are made to the new credentials, rather
than the task itself as in security_task_post_setuid().
(*) security_task_reparent_to_init(), ->task_reparent_to_init()
Removed. Instead the task being reparented to init is referred
directly to init's credentials.
NOTE! This results in the loss of some state: SELinux's osid no
longer records the sid of the thread that forked it.
(*) security_key_alloc(), ->key_alloc()
(*) security_key_permission(), ->key_permission()
Changed. These now take cred pointers rather than task pointers to
refer to the security context.
(4) sys_capset().
This has been simplified and uses less locking. The LSM functions it
calls have been merged.
(5) reparent_to_kthreadd().
This gives the current thread the same credentials as init by simply using
commit_thread() to point that way.
(6) __sigqueue_alloc() and switch_uid()
__sigqueue_alloc() can't stop the target task from changing its creds
beneath it, so this function gets a reference to the currently applicable
user_struct which it then passes into the sigqueue struct it returns if
successful.
switch_uid() is now called from commit_creds(), and possibly should be
folded into that. commit_creds() should take care of protecting
__sigqueue_alloc().
(7) [sg]et[ug]id() and co and [sg]et_current_groups.
The set functions now all use prepare_creds(), commit_creds() and
abort_creds() to build and check a new set of credentials before applying
it.
security_task_set[ug]id() is called inside the prepared section. This
guarantees that nothing else will affect the creds until we've finished.
The calling of set_dumpable() has been moved into commit_creds().
Much of the functionality of set_user() has been moved into
commit_creds().
The get functions all simply access the data directly.
(8) security_task_prctl() and cap_task_prctl().
security_task_prctl() has been modified to return -ENOSYS if it doesn't
want to handle a function, or otherwise return the return value directly
rather than through an argument.
Additionally, cap_task_prctl() now prepares a new set of credentials, even
if it doesn't end up using it.
(9) Keyrings.
A number of changes have been made to the keyrings code:
(a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
all been dropped and built in to the credentials functions directly.
They may want separating out again later.
(b) key_alloc() and search_process_keyrings() now take a cred pointer
rather than a task pointer to specify the security context.
(c) copy_creds() gives a new thread within the same thread group a new
thread keyring if its parent had one, otherwise it discards the thread
keyring.
(d) The authorisation key now points directly to the credentials to extend
the search into rather pointing to the task that carries them.
(e) Installing thread, process or session keyrings causes a new set of
credentials to be created, even though it's not strictly necessary for
process or session keyrings (they're shared).
(10) Usermode helper.
The usermode helper code now carries a cred struct pointer in its
subprocess_info struct instead of a new session keyring pointer. This set
of credentials is derived from init_cred and installed on the new process
after it has been cloned.
call_usermodehelper_setup() allocates the new credentials and
call_usermodehelper_freeinfo() discards them if they haven't been used. A
special cred function (prepare_usermodeinfo_creds()) is provided
specifically for call_usermodehelper_setup() to call.
call_usermodehelper_setkeys() adjusts the credentials to sport the
supplied keyring as the new session keyring.
(11) SELinux.
SELinux has a number of changes, in addition to those to support the LSM
interface changes mentioned above:
(a) selinux_setprocattr() no longer does its check for whether the
current ptracer can access processes with the new SID inside the lock
that covers getting the ptracer's SID. Whilst this lock ensures that
the check is done with the ptracer pinned, the result is only valid
until the lock is released, so there's no point doing it inside the
lock.
(12) is_single_threaded().
This function has been extracted from selinux_setprocattr() and put into
a file of its own in the lib/ directory as join_session_keyring() now
wants to use it too.
The code in SELinux just checked to see whether a task shared mm_structs
with other tasks (CLONE_VM), but that isn't good enough. We really want
to know if they're part of the same thread group (CLONE_THREAD).
(13) nfsd.
The NFS server daemon now has to use the COW credentials to set the
credentials it is going to use. It really needs to pass the credentials
down to the functions it calls, but it can't do that until other patches
in this series have been applied.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
Pass credentials through dentry_open() so that the COW creds patch can have
SELinux's flush_unauthorized_files() pass the appropriate creds back to itself
when it opens its null chardev.
The security_dentry_open() call also now takes a creds pointer, as does the
dentry_open hook in struct security_operations.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
Trond Myklebust