dect
/
linux-2.6
Archived
13
0
Fork 0
Commit Graph

1150 Commits

Author SHA1 Message Date
Linus Torvalds 3cfc2c42c1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...
2010-08-04 15:31:02 -07:00
Jiri Kosina d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
James Morris 77c80e6b2f AppArmor: fix build warnings for non-const use of get_task_cred
Fix build warnings for non-const use of get_task_cred.

Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:49:00 +10:00
Eric Paris 6371dcd36f selinux: convert the policy type_attr_map to flex_array
Current selinux policy can have over 3000 types.  The type_attr_map in
policy is an array sized by the number of types times sizeof(struct ebitmap)
(12 on x86_64).  Basic math tells us the array is going to be of length
3000 x 12 = 36,000 bytes.  The largest 'safe' allocation on a long running
system is 16k.  Most of the time a 32k allocation will work.  But on long
running systems a 64k allocation (what we need) can fail quite regularly.
In order to deal with this I am converting the type_attr_map to use
flex_arrays.  Let the library code deal with breaking this into PAGE_SIZE
pieces.

-v2
rework some of the if(!obj) BUG() to be BUG_ON(!obj)
drop flex_array_put() calls and just use a _get() object directly

-v3
make apply to James' tree (drop the policydb_write changes)

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:39 +10:00
John Johansen 016d825fe0 AppArmor: Enable configuring and building of the AppArmor security module
Kconfig and Makefiles to enable configuration and building of AppArmor.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:39 +10:00
Tetsuo Handa 484ca79c65 TOMOYO: Use pathname specified by policy rather than execve()
Commit c9e69318 "TOMOYO: Allow wildcard for execute permission." changed execute
permission and domainname to accept wildcards. But tomoyo_find_next_domain()
was using pathname passed to execve() rather than pathname specified by the
execute permission. As a result, processes were not able to transit to domains
which contain wildcards in their domainnames.

This patch passes pathname specified by the execute permission back to
tomoyo_find_next_domain() so that processes can transit to domains which
contain wildcards in their domainnames.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:38 +10:00
James Morris 4d6ec10bb4 AppArmor: update path_truncate method to latest version
Remove extraneous path_truncate arguments from the AppArmor hook,
as they've been removed from the LSM API.

Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:37 +10:00
John Johansen c88d4c7b04 AppArmor: core policy routines
The basic routines and defines for AppArmor policy.  AppArmor policy
is defined by a few basic components.
      profiles - the basic unit of confinement contain all the information
                 to enforce policy on a task

                 Profiles tend to be named after an executable that they
                 will attach to but this is not required.
      namespaces - a container for a set of profiles that will be used
                 during attachment and transitions between profiles.
      sids - which provide a unique id for each profile

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:37 +10:00
John Johansen 736ec752d9 AppArmor: policy routines for loading and unpacking policy
AppArmor policy is loaded in a platform independent flattened binary
stream.  Verify and unpack the data converting it to the internal
format needed for enforcement.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:36 +10:00
John Johansen 0ed3b28ab8 AppArmor: mediation of non file objects
ipc:
AppArmor ipc is currently limited to mediation done by file mediation
and basic ptrace tests.  Improved mediation is a wip.

rlimits:
AppArmor provides basic abilities to set and control rlimits at
a per profile level.  Only resources specified in a profile are controled
or set.  AppArmor rules set the hard limit to a value <= to the current
hard limit (ie. they can not currently raise hard limits), and if
necessary will lower the soft limit to the new hard limit value.

AppArmor does not track resource limits to reset them when a profile
is left so that children processes inherit the limits set by the
parent even if they are not confined by the same profile.

Capabilities:  AppArmor provides a per profile mask of capabilities,
that will further restrict.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:35 +10:00
John Johansen b5e95b4868 AppArmor: LSM interface, and security module initialization
AppArmor hooks to interface with the LSM, module parameters and module
initialization.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:35 +10:00
John Johansen f9ad1af53d AppArmor: Enable configuring and building of the AppArmor security module
Kconfig and Makefiles to enable configuration and building of AppArmor.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:34 +10:00
John Johansen 898127c34e AppArmor: functions for domain transitions
AppArmor routines for controling domain transitions, which can occur at
exec or through self directed change_profile/change_hat calls.

Unconfined tasks are checked at exec against the profiles in the confining
profile namespace to determine if a profile should be attached to the task.

Confined tasks execs are controlled by the profile which provides rules
determining which execs are allowed and if so which profiles should be
transitioned to.

Self directed domain transitions allow a task to request transition
to a given profile.  If the transition is allowed then the profile will
be applied, either immeditately or at exec time depending on the request.
Immeditate self directed transitions have several security limitations
but have uses in setting up stub transition profiles and other limited
cases.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:14 +10:00
John Johansen 6380bd8ddf AppArmor: file enforcement routines
AppArmor does files enforcement via pathname matching.  Matching is done
at file open using a dfa match engine.  Permission is against the final
file object not parent directories, ie. the traversal of directories
as part of the file match is implicitly allowed.  In the case of nonexistant
files (creation) permissions are checked against the target file not the
directory.  eg. In case of creating the file /dir/new, permissions are
checked against the match /dir/new not against /dir/.

The permissions for matches are currently stored in the dfa accept table,
but this will change to allow for dfa reuse and also to allow for sharing
of wider accept states.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:14 +10:00
John Johansen 63e2b42377 AppArmor: userspace interfaces
The /proc/<pid>/attr/* interface is used for process introspection and
commands.  While the apparmorfs interface is used for global introspection
and loading and removing policy.

The interface currently only contains the files necessary for loading
policy, and will be extended in the future to include sysfs style
single per file introspection inteface.

The old AppArmor 2.4 interface files have been removed into a compatibility
patch, that distros can use to maintain backwards compatibility.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:13 +10:00
John Johansen e06f75a6a2 AppArmor: dfa match engine
A basic dfa matching engine based off the dfa engine in the Dragon
Book.  It uses simple row comb compression with a check field.

This allows AppArmor to do pattern matching in linear time, and also
avoids stack issues that an nfa based engine may have.  The dfa
engine uses a byte based comparison, with all values being valid.
Any potential character encoding are handled user side when the dfa
tables are created.  By convention AppArmor uses \0 to separate two
dependent path matches since \0 is not a valid path character
(this is done in the link permission check).

The dfa tables are generated in user space and are verified at load
time to be internally consistent.

There are several future improvements planned for the dfa engine:
* The dfa engine may be converted to a hybrid nfa-dfa engine, with
  a fixed size limited stack.  This would allow for size time
  tradeoffs, by inserting limited nfa states to help control
  state explosion that can occur with dfas.
* The dfa engine may pickup the ability to do limited dynamic
  variable matching, instead of fixing all variables at policy
  load time.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:13 +10:00
John Johansen c75afcd153 AppArmor: contexts used in attaching policy to system objects
AppArmor contexts attach profiles and state to tasks, files, etc. when
a direct profile reference is not sufficient.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:12 +10:00
John Johansen 67012e8209 AppArmor: basic auditing infrastructure.
Update lsm_audit for AppArmor specific data, and add the core routines for
AppArmor uses for auditing.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:11 +10:00
John Johansen cdff264264 AppArmor: misc. base functions and defines
Miscellaneous functions and defines needed by AppArmor, including
the base path resolution routines.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:11 +10:00
Tetsuo Handa e6f6a4cc95 TOMOYO: Update version to 2.3.0
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:10 +10:00
Tetsuo Handa 7e3d199a40 TOMOYO: Fix quota check.
Commit d74725b9 "TOMOYO: Use callback for updating entries." broke
tomoyo_domain_quota_is_ok() by counting deleted entries. It needs to
count non-deleted entries.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:09 +10:00
Eric Paris b424485abe SELinux: Move execmod to the common perms
execmod "could" show up on non regular files and non chr files.  The current
implementation would actually make these checks against non-existant bits
since the code assumes the execmod permission is same for all file types.
To make this line up for chr files we had to define execute_no_trans and
entrypoint permissions.  These permissions are unreachable and only existed
to to make FILE__EXECMOD and CHR_FILE__EXECMOD the same.  This patch drops
those needless perms as well.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:09 +10:00
Eric Paris 49b7b8de46 selinux: place open in the common file perms
kernel can dynamically remap perms.  Drop the open lookup table and put open
in the common file perms.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:08 +10:00
Eric Paris b782e0a68d SELinux: special dontaudit for access checks
Currently there are a number of applications (nautilus being the main one) which
calls access() on files in order to determine how they should be displayed.  It
is normal and expected that nautilus will want to see if files are executable
or if they are really read/write-able.  access() should return the real
permission.  SELinux policy checks are done in access() and can result in lots
of AVC denials as policy denies RWX on files which DAC allows.  Currently
SELinux must dontaudit actual attempts to read/write/execute a file in
order to silence these messages (and not flood the logs.)  But dontaudit rules
like that can hide real attacks.  This patch addes a new common file
permission audit_access.  This permission is special in that it is meaningless
and should never show up in an allow rule.  Instead the only place this
permission has meaning is in a dontaudit rule like so:

dontaudit nautilus_t sbin_t:file audit_access

With such a rule if nautilus just checks access() we will still get denied and
thus userspace will still get the correct answer but we will not log the denial.
If nautilus attempted to actually perform one of the forbidden actions
(rather than just querying access(2) about it) we would still log a denial.
This type of dontaudit rule should be used sparingly, as it could be a
method for an attacker to probe the system permissions without detection.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:07 +10:00
Eric Paris d09ca73979 security: make LSMs explicitly mask off permissions
SELinux needs to pass the MAY_ACCESS flag so it can handle auditting
correctly.  Presently the masking of MAY_* flags is done in the VFS.  In
order to allow LSMs to decide what flags they care about and what flags
they don't just pass them all and the each LSM mask off what they don't
need.  This patch should contain no functional changes to either the VFS or
any LSM.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:07 +10:00
Eric Paris 692a8a231b SELinux: break ocontext reading into a separate function
Move the reading of ocontext type data out of policydb_read() in a separate
function ocontext_read()

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:06 +10:00
Eric Paris d1b43547e5 SELinux: move genfs read to a separate function
move genfs read functionality out of policydb_read() and into a new
function called genfs_read()

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:05 +10:00
Dan Carpenter 9a7982793c selinux: fix error codes in symtab_init()
hashtab_create() only returns NULL on allocation failures to -ENOMEM is
appropriate here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:04 +10:00
Dan Carpenter 338437f6a0 selinux: fix error codes in cond_read_bool()
The original code always returned -1 (-EPERM) on error.  The new code
returns either -ENOMEM, or -EINVAL or it propagates the error codes from
lower level functions next_entry() or hashtab_insert().

next_entry() returns -EINVAL.
hashtab_insert() returns -EINVAL, -EEXIST, or -ENOMEM.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:04 +10:00
Dan Carpenter 38184c5222 selinux: fix error codes in cond_policydb_init()
It's better to propagate the error code from avtab_init() instead of
returning -1 (-EPERM).  It turns out that avtab_init() never fails so
this patch doesn't change how the code runs but it's still a clean up.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:03 +10:00
Dan Carpenter fc5c126e47 selinux: fix error codes in cond_read_node()
Originally cond_read_node() returned -1 (-EPERM) on errors which was
incorrect.  Now it either propagates the error codes from lower level
functions next_entry() or cond_read_av_list() or it returns -ENOMEM or
-EINVAL.

next_entry() returns -EINVAL.
cond_read_av_list() returns -EINVAL or -ENOMEM.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:02 +10:00
Dan Carpenter 9d623b17a7 selinux: fix error codes in cond_read_av_list()
After this patch cond_read_av_list() no longer returns -1 for any
errors.  It just propagates error code back from lower levels.  Those can
either be -EINVAL or -ENOMEM.

I also modified cond_insertf() since cond_read_av_list() passes that as a
function pointer to avtab_read_item().  It isn't used anywhere else.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:02 +10:00
Dan Carpenter 5241c1074f selinux: propagate error codes in cond_read_list()
These are passed back when the security module gets loaded.

The original code always returned -1 (-EPERM) on error but after this
patch it can return -EINVAL, or -ENOMEM or propagate the error code from
cond_read_node().  cond_read_node() still returns -1 all the time, but I
fix that in a later patch.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:01 +10:00
Dan Carpenter 9e0bd4cba4 selinux: cleanup return codes in avtab_read_item()
The avtab_read_item() function tends to return -1 as a default error
code which is wrong (-1 means -EPERM).  I modified it to return
appropriate error codes which is -EINVAL or the error code from
next_entry() or insertf().

next_entry() returns -EINVAL.
insertf() is a function pointer to either avtab_insert() or
cond_insertf().
avtab_insert() returns -EINVAL, -ENOMEM, and -EEXIST.
cond_insertf() currently returns -1, but I will fix it in a later patch.

There is code in avtab_read() which translates the -1 returns from
avtab_read_item() to -EINVAL. The translation is no longer needed, so I
removed it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:01 +10:00
Chihau Chau dce3a3d2ee Security: capability: code style issue
This fix a little code style issue deleting a space between a function
name and a open parenthesis.

Signed-off-by: Chihau Chau <chihau@gmail.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:00 +10:00
Tvrtko Ursulin b8bc83ab4d securityfs: Drop dentry reference count when mknod fails
lookup_one_len increments dentry reference count which is not decremented
when the create operation fails. This can cause a kernel BUG at
fs/dcache.c:676 at unmount time. Also error code returned when new_inode()
fails was replaced with more appropriate -ENOMEM.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:59 +10:00
Arnd Bergmann 57a62c2317 selinux: use generic_file_llseek
The default for llseek will change to no_llseek,
so selinuxfs needs to add explicit .llseek
assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:59 +10:00
Arnd Bergmann cdcd90f9e4 ima: use generic_file_llseek for securityfs
The default for llseek will change to no_llseek,
so securityfs users need to add explicit .llseek
assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:58 +10:00
Tetsuo Handa 7e2deb7ce8 TOMOYO: Explicitly set file_operations->llseek pointer.
TOMOYO does not deal offset pointer. Thus seek operation makes
no sense. Changing default seek operation from default_llseek()
to no_llseek() might break some applications. Thus, explicitly
set noop_llseek().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:57 +10:00
Mimi Zohar af4f136056 security: move LSM xattrnames to xattr.h
Make the security extended attributes names global. Updated to move
the remaining Smack xattrs.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:57 +10:00
Justin P. Mattock 5ad18a0d59 KEYS: Reinstate lost passing of process keyring ID in call_sbin_request_key()
In commit bb952bb98a there was the accidental
deletion of a statement from call_sbin_request_key() to render the process
keyring ID to a text string so that it can be passed to /sbin/request-key.

With gcc 4.6.0 this causes the following warning:

  CC      security/keys/request_key.o
security/keys/request_key.c: In function 'call_sbin_request_key':
security/keys/request_key.c:102:15: warning: variable 'prkey' set but not used

This patch reinstates that statement.

Without this statement, /sbin/request-key will get some random rubbish from the
stack as that parameter.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:56 +10:00
David Howells 94fd8405ea KEYS: Use the variable 'key' in keyctl_describe_key()
keyctl_describe_key() turns the key reference it gets into a usable key pointer
and assigns that to a variable called 'key', which it then ignores in favour of
recomputing the key pointer each time it needs it.  Make it use the precomputed
pointer instead.

Without this patch, gcc 4.6 reports that the variable key is set but not used:

	building with gcc 4.6 I'm getting a warning message:
	 CC      security/keys/keyctl.o
	security/keys/keyctl.c: In function 'keyctl_describe_key':
	security/keys/keyctl.c:472:14: warning: variable 'key' set but not used

Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:56 +10:00
Tetsuo Handa 0849e3ba53 TOMOYO: Add missing poll() hook.
Commit 1dae08c "TOMOYO: Add interactive enforcing mode." forgot to register
poll() hook. As a result, /usr/sbin/tomoyo-queryd was doing busy loop.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:55 +10:00
Tetsuo Handa e2bf69077a TOMOYO: Rename symbols.
Use shorter name in order to make it easier to fit 80 columns limit.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:54 +10:00
Tetsuo Handa 8e5686874b TOMOYO: Small cleanup.
Split tomoyo_write_profile() into several functions.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:54 +10:00
Tetsuo Handa f23571e866 TOMOYO: Copy directly to userspace buffer.
When userspace program reads policy from /sys/kernel/security/tomoyo/
interface, TOMOYO uses line buffered mode. A line has at least one word.

Commit 006dacc "TOMOYO: Support longer pathname." changed a word's max length
from 4000 bytes to max kmalloc()able bytes. By that commit, a line's max length
changed from 8192 bytes to more than max kmalloc()able bytes.

Max number of words in a line remains finite. This patch changes the way of
buffering so that all words in a line are firstly directly copied to userspace
buffer as much as possible and are secondly queued for next read request.
Words queued are guaranteed to be valid until /sys/kernel/security/tomoyo/
interface is close()d.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:45 +10:00
Tetsuo Handa 5db5a39b64 TOMOYO: Use common code for policy reading.
tomoyo_print_..._acl() are similar. Merge them.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:45 +10:00
Tetsuo Handa 063821c816 TOMOYO: Allow reading only execute permission.
Policy editor needs to know allow_execute entries in order to build domain
transition tree. Reading all entries is slow. Thus, allow reading only
allow_execute entries.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:44 +10:00
Tetsuo Handa 475e6fa3d3 TOMOYO: Change list iterator.
Change list_for_each_cookie to

(1) start from current position rather than next position
(2) remove temporary cursor
(3) check that srcu_read_lock() is held

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:44 +10:00
Tetsuo Handa 5448ec4f50 TOMOYO: Use common code for domain transition control.
Use common code for "initialize_domain"/"no_initialize_domain"/"keep_domain"/
"no_keep_domain" keywords.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:43 +10:00