The md/dev-XXX/state file can now be written:
"faulty" simulates an error on the device
"remove" removes the device from the array (if it is not busy)
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This allows the state of an md/array to be directly controlled via sysfs and
adds the ability to stop and array without tearing it down.
Array states/settings:
clear
No devices, no size, no level
Equivalent to STOP_ARRAY ioctl
inactive
May have some settings, but array is not active
all IO results in error
When written, doesn't tear down array, but just stops it
suspended (not supported yet)
All IO requests will block. The array can be reconfigured.
Writing this, if accepted, will block until array is quiescent
readonly
no resync can happen. no superblocks get written.
write requests fail
read-auto
like readonly, but behaves like 'clean' on a write request.
clean - no pending writes, but otherwise active.
When written to inactive array, starts without resync
If a write request arrives then
if metadata is known, mark 'dirty' and switch to 'active'.
if not known, block and switch to write-pending
If written to an active array that has pending writes, then fails.
active
fully active: IO and resync can be happening.
When written to inactive array, starts with resync
write-pending (not supported yet)
clean, but writes are blocked waiting for 'active' to be written.
active-idle
like active, but no writes have been seen for a while (100msec).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a md array has been idle (no writes) for 20msecs it is marked as 'clean'.
This delay turns out to be too short for some real workloads. So increase it
to 200msec (the time to update the metadata should be a tiny fraction of that)
and make it sysfs-configurable.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update Documentation/fb/fbcon.txt and Documentatin/console/console.txt to
reflect the following changes:
1. sysfs attributes are relocated to /sys/class/vtconsole
2. feature is selectable in Kconfig
3. add sample scripts to fbcon.txt
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This newly added file will:
- Describe the characteristics of 2 general types of console drivers
- How to use the sysfs to unbind and bind console drivers
- Uses for this feature
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update Documentation/fb/fbcon.txt to reflect the following changes:
1. Simple illustration of the binding of the console down to individual
framebuffer drivers
2. Usage of userspace tools to help with recovery of text console
3. How to use the attributes in /sys/class/tty/console to unload fbcon and
the framebuffer drivers
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update Documentation/fb/fbcon.txt on the following:
1. sysfs attributes are now located in class/graphics/fbcon
2. instructions on how to attach, detach and/or unload fbcon
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement the time sources for i386 (acpi_pm, cyclone, hpet, pit, and tsc).
With this patch, the conversion of the i386 arch to the generic timekeeping
code should be complete.
The patch should be fairly straight forward, only adding the new clocksources.
[hirofumi@mail.parknet.co.jp: acpi_pm cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This introduces the clocksource management infrastructure. A clocksource is a
driver-like architecture generic abstraction of a free-running counter. This
code defines the clocksource structure, and provides management code for
registering, selecting, accessing and scaling clocksources.
Additionally, this includes the trivial jiffies clocksource, a lowest common
denominator clocksource, provided mainly for use as an example.
[hirofumi@mail.parknet.co.jp: Don't enable IRQ too early]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds "-o bh" option to force use of buffer_heads. This option
is needed when we make "nobh" as default - and if we run into problems.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a /proc/<pid>/attr/keycreate entry that stores the appropriate context for
newly-created keys. Modify the selinux_key_alloc hook to make use of the new
entry. Update the flask headers to include a new "setkeycreate" permission
for processes. Update the flask headers to include a new "create" permission
for keys. Use the create permission to restrict which SIDs each task can
assign to newly-created keys. Add a new parameter to the security hook
"security_key_alloc" to indicate whether it is being invoked by the kernel, or
from userspace. If it is being invoked by the kernel, the security hook
should never fail. Update the documentation to reflect these changes.
Signed-off-by: Michael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Restrict /proc/keys such that only those keys to which the current task is
granted View permission are presented.
The documentation is also updated to reflect these changes.
Signed-off-by: Michael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This method died some time ago, so kill the doc for it.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (51 commits)
nfs: remove nfs_put_link()
nfs-build-fix-99
git-nfs-build-fixes
Merge branch 'odirect'
NFS: alloc nfs_read/write_data as direct I/O is scheduled
NFS: Eliminate nfs_get_user_pages()
NFS: refactor nfs_direct_free_user_pages
NFS: remove user_addr, user_count, and pos from nfs_direct_req
NFS: "open code" the NFS direct write rescheduler
NFS: Separate functions for counting outstanding NFS direct I/Os
NLM: Fix reclaim races
NLM: sem to mutex conversion
locks.c: add the fl_owner to nlm_compare_locks
NFS: Display the chosen RPCSEC_GSS security flavour in /proc/mounts
NFS: Split fs/nfs/inode.c
NFS: Fix typo in nfs_do_clone_mount()
NFS: Fix compile errors introduced by referrals patches
NFSv4: Ensure that referral mounts bind to a reserved port
NFSv4: A root pathname is sent as a zero component4
NFSv4: Follow a referral
...
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (244 commits)
V4L/DVB (4210b): git-dvb: tea575x-tuner build fix
V4L/DVB (4210a): git-dvb versus matroxfb
V4L/DVB (4209): Added some BTTV PCI IDs for newer boards
Fixes some sync issues between V4L/DVB development and GIT
V4L/DVB (4206): Cx88-blackbird: always set encoder height based on tvnorm->id
V4L/DVB (4205): Merge tda9887 module into tuner.
V4L/DVB (4203): Explicitly set the enum values.
V4L/DVB (4202): allow selecting CX2341x port mode
V4L/DVB (4200): Disable bitrate_mode when encoding mpeg-1.
V4L/DVB (4199): Add cx2341x-specific control array to cx2341x.c
V4L/DVB (4198): Avoid newer usages of obsoleted experimental MPEGCOMP API
V4L/DVB (4197): Port new MPEG API to saa7134-empress with saa6752hs
V4L/DVB (4196): Port cx88-blackbird to the new MPEG API.
V4L/DVB (4193): Update cx2341x fw encoding API doc.
V4L/DVB (4192): Use control helpers for saa7115, cx25840, msp3400.
V4L/DVB (4191): Add CX2341X MPEG encoder module.
V4L/DVB (4190): Add helper functions for control processing to v4l2-common.
V4L/DVB (4189): Add videodev support for VIDIOC_S/G/TRY_EXT_CTRLS.
V4L/DVB (4188): Add new MPEG control/ioctl definitions to videodev2.h
V4L/DVB (4186): Add support for the DNTV Live! mini DVB-T card.
...
Update Documentation/devices.txt with a new version from the LANANA site
http://www.lanana.org/docs/device-list/devices-2.6+.txt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Apply some small corrections to the memory barrier document, as contributed by:
Christoph Lameter <clameter@sgi.com>
Kirill Smelkov <kirr@mns.spb.ru>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move kthread API kernel-doc from kthread.h to kthread.c & fix it.
Add kthread API to kernel-api DocBook.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add DMI interface functions to a new Firmware Interfaces chapter in the
kernel-api DocBook. Clean up kernel-doc in drivers/firmware/dmi_scan.c.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
New section on creating an external initramfs image using cpio (with
script), a warning about bad advice in the cpio man page, a bit of
debugging advice (hello world and rdinit=/bin/sh), and a few minor tweaks
to other parts of it.
Signed-off-by: Rob Landley <rob@landley.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make kernel-doc corrections & additions to lib/crc*.c. Add crc functions to
kernel-api.tmpl in DocBook.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a new chapter for kernel-lib functions to kernel-api.tmpl. Add
lib/cmdline.c to the new kernel-lib chapter.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make corrections/fixes to kernel-doc in lib/bitmap.c and include it in DocBook
template.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add synchronous request interruption. This is needed for file locking
operations which have to be interruptible. However filesystem may implement
interruptibility of other operations (e.g. like NFS 'intr' mount option).
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a control filesystem to fuse, replacing the attributes currently exported
through sysfs. An empty directory '/sys/fs/fuse/connections' is still created
in sysfs, and mounting the control filesystem here provides backward
compatibility.
Advantages of the control filesystem over the previous solution:
- allows the object directory and the attributes to be owned by the
filesystem owner, hence letting unpriviled users abort the
filesystem connection
- does not suffer from module unload race
[akpm@osdl.org: fix this fs for recent dhowells depredations]
[akpm@osdl.org: fix 64-bit printk warnings]
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Don't put requests into the background when a fatal interrupt occurs while the
request is in userspace. This removes a major wart from the implementation.
Backgrounding of requests was introduced to allow breaking of deadlocks.
However now the same can be achieved by aborting the filesystem through the
'abort' sysfs attribute.
This is a change in the interface, but should not cause problems, since these
kinds of deadlocks never happen during normal operation.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make another couple of alterations to the memory barrier document following
suggestions by Alan Stern and in co-operation with Paul McKenney:
(*) Rework the point of introduction of memory barriers and the description
of what they are to reiterate why they're needed.
(*) Modify a statement about the use of data dependency barriers to note that
other barriers can be used instead (as they imply DD-barriers).
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-By: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
An update to the RCU documentation calling out the
self-limiting-update-rate advantages of synchronize_rcu(), and describing
how to use call_rcu() in a way that results in self-limiting updates.
Self-limiting updates are important to avoiding RCU-induced OOM in face of
denial-of-service attacks.
Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
sysrq SAK is described as being something you should mistake for SAK from
c2 compliant systems - whoops. What's meant is that it should *not* be
mistaken as such.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
CX2341X port was always set to 'memory', but 'streaming' is also possible
ivtv uses the memory (DMA) interface with the CX2341X, while pvrusb2 and
cx88-blackbird use the streaming interface. This setting is now selectable
by the driver.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Based on recent tests it turned out that some features are not implemented.
This has now been documented.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Add support for FusionHDTV 3 Gold (original revision), using the
card definition for FusionHDTV3 Gold-Q
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
The description of the card has been updated to it's full name/model.
The tuner has also been switched to a more compatible one (radio
wasn't working, now it is)
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
- use eeprom data to detect Osprey 230
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Add DVB-T and PAL-G television support for Winfast DTV2000H
Signed-off-by: Malcolm Valentine <farkit@iinet.net.au>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Documentation/video4linux/:
Expose example and tool source files in the Documentation/ directory in
their own files instead of being buried (almost hidden) in readme/txt files.
This will make them more visible/usable to users who may need
to use them, to developers who may need to test with them, and
to janitors who would update them if they were more visible.
Also, if any of these possibly should not be in the kernel tree at
all, it will be clearer that they are here and we can discuss if
they should be removed.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Added support for a new cx88 card, including it's remote
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
- Add support for ProLink Pixelview Playtv@P7000
Raw video and MPEG encoded video confirmed to work properly.
SVideo, Composite and FM inputs are untested - disabled for now.
Signed-off-by: Angelo Marconi <am@massalombarda.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Added autodetection for PCI subsystem id 1822:0019 to use
the card definition for CX88_BOARD_DNTV_LIVE_DVB_T_PRO
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Date:
From: Mauro Carvalho Chehab <mchehab@infradead.org>
There are some docs at V4L/DVB tree that were never included at kernel.
This patch includes those docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
NeilBrown