For buffer read, use offst-to-isize.
For direct read, use dreq->bytes_left.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For buffer write, block layout client scan inode mapping to find
next hole and use offset-to-hole as layoutget length. Object
layout client uses offset-to-isize as layoutget length.
For direct write, both block layout and object layout use dreq->bytes_left.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Split it into two functions, one which checks if layoutgets are blocked,
and one which checks if the layout stateid has expired.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clamp the layout barrier sequence id to the current sequence id
minus the maximum number of outstanding layoutget requests.
Also ensure that we correctly initialise lo->plh_barrier if there are
no layout segments associated to this layout header.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Failure of the layoutreturn allocation fails is not a good reason to
mark the pnfs_layout_hdr as having failed a layoutget or i/o. Just
exit cleanly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It serves no purpose that the test for whether or not we have valid
layout segments doesn't already serve.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Once all the affected layout segments have been freed up, clear the
NFS_LAYOUT_BULK_RECALL flag so that we can reuse the pnfs_layout_hdr
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We already have a mechanism for blocking LAYOUTGET by means of the
plh_block_lgets counter. The only "service" that NFS_LAYOUT_DESTROYED
provides at this point is to block layoutget once the layout segment
list is empty, which basically means that you have to wait until
the pnfs_layout_hdr is destroyed before you can do pNFS on that file
again.
This patch enables the reuse of the pnfs_layout_hdr if the layout
segment list is empty.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that the reference count for pnfs_layout_hdr reverts to the
original value after a call to pnfs_layout_remove_lseg().
Note that the caller is expected to hold a reference to the struct
pnfs_layout_hdr.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no longer a need to use pnfs_free_lseg_list(). Just call
pnfs_free_lseg() directly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the code into pnfs_free_layout_hdr(), and add checks to
get_layout_by_fh_locked to ensure that they don't reference a layout
that is being freed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
None of the existing pNFS layout drivers seem to require the inode
to be locked while they free the layout header.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Each layout segment already holds a reference to the pnfs_layout_hdr,
so there is no need to hold an extra reference that is released once
the last layout segment is freed.
Ensure that pnfs_find_alloc_layout() always returns a reference
to the pnfs_layout_hdr, which will be matched by the final call to
pnfs_put_layout_hdr() in pnfs_update_layout().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The latter name is more descriptive of the actual function.
Also rename pnfs_insert_layout to pnfs_layout_insert_lseg.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of resetting the inode MDS threshold counters when we mark
the layout for destruction, do it as part of freeing the layout.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we sleep after dropping the inode->i_lock, then we are no longer
atomic with respect to the rpc_wake_up() call in pnfs_layout_remove_lseg().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If pnfs_layout_io_test_failed() authorises a retry of the failed layoutgets,
we should clear the existing layout segments so that we start afresh. Do
this in pnfs_layout_io_set_failed().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to cache the pnfs_layout_hdr after a layoutget or i/o
failure so that pnfs_update_layout() can find it and know when
it is time to retry.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we exit after the call to pnfs_find_alloc_layout(), we have to ensure
that we put the struct pnfs_layout_hdr.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we had to fall back to read/write through MDS, then assume that we should
retry pNFS after a suitable timeout period.
The following patch sets a timeout of 2 minutes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Dereferencing nfsi->layout in order to read plh_flags without holding
a spin lock is bug prone. Furthermore, the dprintk() tells you nothing
about whether or not the call succeeded.
Replace it with something that tells you about whether or not a valid
layout segment was returned for the inode in question.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we do return errors from nfs4_proc_layoutget() and that we
don't mark the layout as having failed if the error was due to a
signal or resource problem on the client side.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.
hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.
Signed-off-by: Idan Kedar <idank@tonian.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch exports symbols needed by the v4 module. In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.
The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
mark_matching_lsegs_invalid() resets the mds_threshold counters and can
dereference the layout hdr on an initial empty plh_segs list. It returns 0 both
in the case of an initial empty list and in a non-emtpy list that was cleared
by calls to mark_lseg_invalid.
Don't send a LAYOUTRETURN if the list was initially empty.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When the file layout driver is fencing a DS, _pnfs_return_layout can be
called mulitple times per inode due to in-flight i/o referencing lsegs on it's
plh_segs list.
Remember that LAYOUTRETURN has been called, and do not call it again.
Allow LAYOUTRETURNs after a subsequent LAYOUTGET.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing writes.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing reads.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The call to try_module_get() dereferences ld_type outside the
spin locks, which means that it may be pointing to garbage if
a module unload was in progress.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently there is a 'chicken and egg' issue when the DS is also the mounted
MDS. The nfs_match_client() reference from nfs4_set_ds_client bumps the
cl_count, the nfs_client is not freed at umount, and nfs4_deviceid_purge_client
is not called to dereference the MDS usage of a deviceid which holds a
reference to the DS nfs_client. The result is the umount program returns,
but the nfs_client is not freed, and the cl_session hearbeat continues.
The MDS (and all other nfs mounts) lose their last nfs_client reference in
nfs_free_server when the last nfs_server (fsid) is umounted.
The file layout DS lose their last nfs_client reference in destroy_ds
when the last deviceid referencing the data server is put and destroy_ds is
called. This is triggered by a call to nfs4_deviceid_purge_client which
removes references to a pNFS deviceid used by an MDS mount.
The fix is to track how many pnfs enabled filesystems are mounted from
this server, and then to purge the device id cache once that count reaches
zero.
Reported-by: Jorge Mora <Jorge.Mora@netapp.com>
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server. Currently, the layout must be
destroyed before a new layout can be obtained.
This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.
Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Let the MDS know that you are redirecting I/O from pNFS to MDS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.
Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the error handling for nfs_generic_pagein() into a single function.
Ditto for nfs_generic_flush().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
If the allocation of nfs_write_header fails, the list of nfs_pages that
needs to be cleaned up is still on desc->pg_list...
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Fred Isaman <iisaman@netapp.com>
The coalesce code made assumptions that will no longer be true once
non-page aligned io occurs. This introduces no change in
current behavior, but allows for more general situations to come.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Peng Tao