As pointed out by Jan xfs_trans_alloc can race with a concurrent filesystem
freeze when it sleeps during the memory allocation. Fix this by moving the
wait_for_freeze call after the memory allocation. This means moving the
freeze into the low-level _xfs_trans_alloc helper, which thus grows a new
argument. Also fix up some comments in that area while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
When inodes are marked stale in a transaction, they are treated
specially when the inode log item is being inserted into the AIL.
It tries to avoid moving the log item forward in the AIL due to a
race condition with the writing the underlying buffer back to disk.
The was "fixed" in commit de25c18 ("xfs: avoid moving stale inodes
in the AIL").
To avoid moving the item forward, we return a LSN smaller than the
commit_lsn of the completing transaction, thereby trying to trick
the commit code into not moving the inode forward at all. I'm not
sure this ever worked as intended - it assumes the inode is already
in the AIL, but I don't think the returned LSN would have been small
enough to prevent moving the inode. It appears that the reason it
worked is that the lower LSN of the inodes meant they were inserted
into the AIL and flushed before the inode buffer (which was moved to
the commit_lsn of the transaction).
The big problem is that with delayed logging, the returning of the
different LSN means insertion takes the slow, non-bulk path. Worse
yet is that insertion is to a position -before- the commit_lsn so it
is doing a AIL traversal on every insertion, and has to walk over
all the items that have already been inserted into the AIL. It's
expensive.
To compound the matter further, with delayed logging inodes are
likely to go from clean to stale in a single checkpoint, which means
they aren't even in the AIL at all when we come across them at AIL
insertion time. Hence these were all getting inserted into the AIL
when they simply do not need to be as inodes marked XFS_ISTALE are
never written back.
Transactional/recovery integrity is maintained in this case by the
other items in the unlink transaction that were modified (e.g. the
AGI btree blocks) and committed in the same checkpoint.
So to fix this, simply unpin the stale inodes directly in
xfs_inode_item_committed() and return -1 to indicate that the AIL
insertion code does not need to do any further processing of these
inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Now that we have reliably tracking of deleted extents in a
transaction we can easily implement "online" discard support
which calls blkdev_issue_discard once a transaction commits.
The actual discard is a two stage operation as we first have
to mark the busy extent as not available for reuse before we
can start the actual discard. Note that we don't bother
supporting discard for the non-delaylog mode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Instead of finding the per-ag and then taking and releasing the pagb_lock
for every single busy extent completed sort the list of busy extents and
only switch betweens AGs where nessecary. This becomes especially important
with the online discard support which will hit this lock more often.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Failure to commit a transaction into the CIL is not handled
correctly. This currently can only happen when racing with a
shutdown and requires an explicit shutdown check, so it rare and can
be avoided. Remove the shutdown check and make the CIL commit a void
function to indicate it will always succeed, thereby removing the
incorrectly handled failure case.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
After test 139, kmemleak shows:
unreferenced object 0xffff880078b405d8 (size 400):
comm "xfs_io", pid 4904, jiffies 4294909383 (age 1186.728s)
hex dump (first 32 bytes):
60 c1 17 79 00 88 ff ff 60 c1 17 79 00 88 ff ff `..y....`..y....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81afb04d>] kmemleak_alloc+0x2d/0x60
[<ffffffff8115c6cf>] kmem_cache_alloc+0x13f/0x2b0
[<ffffffff814aaa97>] kmem_zone_alloc+0x77/0xf0
[<ffffffff814aab2e>] kmem_zone_zalloc+0x1e/0x50
[<ffffffff8147cd6b>] xfs_efi_init+0x4b/0xb0
[<ffffffff814a4ee8>] xfs_trans_get_efi+0x58/0x90
[<ffffffff81455fab>] xfs_bmap_finish+0x8b/0x1d0
[<ffffffff814851b4>] xfs_itruncate_finish+0x2c4/0x5d0
[<ffffffff814a970f>] xfs_setattr+0x8df/0xa70
[<ffffffff814b5c7b>] xfs_vn_setattr+0x1b/0x20
[<ffffffff8117dc00>] notify_change+0x170/0x2e0
[<ffffffff81163bf6>] do_truncate+0x66/0xa0
[<ffffffff81163d0b>] sys_ftruncate+0xdb/0xe0
[<ffffffff8103a002>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
The cause of the leak is that the "remove" parameter of IOP_UNPIN()
is never set when a CIL push is aborted. This means that the EFI
item is never freed if it was in the push being cancelled. The
problem is specific to delayed logging, but has uncovered a couple
of problems with the handling of IOP_UNPIN(remove).
Firstly, we cannot safely call xfs_trans_del_item() from IOP_UNPIN()
in the CIL commit failure path or the iclog write failure path
because for delayed loging we have no transaction context. Hence we
must only call xfs_trans_del_item() if the log item being unpinned
has an active log item descriptor.
Secondly, xfs_trans_uncommit() does not handle log item descriptor
freeing during the traversal of log items on a transaction. It can
reference a freed log item descriptor when unpinning an EFI item.
Hence it needs to use a safe list traversal method to allow items to
be removed from the transaction during IOP_UNPIN().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
In fs/xfs/xfs_trans.c::xfs_trans_unreserve_and_mod_sb() at the out:
label we have this:
ASSERT(error = 0);
I believe a comparison was intended, not an assignment. If I'm
right, the patch below fixes that up.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
When inserting items into the AIL from the transaction committed
callbacks, we take the AIL lock for every single item that is to be
inserted. For a CIL checkpoint commit, this can be tens of thousands
of individual inserts, yet almost all of the items will be inserted
at the same point in the AIL because they have the same index.
To reduce the overhead and contention on the AIL lock for such
operations, introduce a "bulk insert" operation which allows a list
of log items with the same LSN to be inserted in a single operation
via a list splice. To do this, we need to pre-sort the log items
being committed into a temporary list for insertion.
The complexity is that not every log item will end up with the same
LSN, and not every item is actually inserted into the AIL. Items
that don't match the commit LSN will be inserted and unpinned as per
the current one-at-a-time method (relatively rare), while items that
are not to be inserted will be unpinned and freed immediately. Items
that are to be inserted at the given commit lsn are placed in a
temporary array and inserted into the AIL in bulk each time the
array fills up.
As a result of this, we trade off AIL hold time for a significant
reduction in traffic. lock_stat output shows that the worst case
hold time is unchanged, but contention from AIL inserts drops by an
order of magnitude and the number of lock traversal decreases
significantly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use the correct prototype for xfs_trans_committed instead of casting it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Update the per-cpu counters manually in xfs_trans_unreserve_and_mod_sb
and remove support for per-cpu counters from xfs_mod_incore_sb_batch
to simplify it. And added benefit is that we don't have to take
m_sb_lock for transactions that only modify per-cpu counters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Export xfs_icsb_modify_counters and always use it for modifying
the per-cpu counters. Remove support for per-cpu counters from
xfs_mod_incore_sb to simplify it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
When we commit a transaction using delayed logging, we need to
unlock the items in the transaciton before we unlock the CIL context
and allow it to be checkpointed. If we unlock them after we release
the CIl context lock, the CIL can checkpoint and complete before
we free the log items. This breaks stale buffer item unlock and
unpin processing as there is an implicit assumption that the unlock
will occur before the unpin.
Also, some log items need to store the LSN of the transaction commit
in the item (inodes and EFIs) and so can race with other transaction
completions if we don't prevent the CIL from checkpointing before
the unlock occurs.
Cc: <stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently we need to either call IHOLD or xfs_trans_ihold on an inode when
joining it to a transaction via xfs_trans_ijoin.
This patches instead makes xfs_trans_ijoin usable on it's own by doing
an implicity xfs_trans_ihold, which also allows us to drop the third
argument. For the case where we want to hold a reference on the inode
a xfs_trans_ijoin_ref wrapper is added which does the IHOLD and marks
the inode for needing an xfs_iput. In addition to the cleaner interface
to the caller this also simplifies the implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The unpin_remove item operation instances always share most of the
implementation with the respective unpin implementation. So instead
of keeping two different entry points add a remove flag to the unpin
operation and share the code more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Currently we track log item descriptor belonging to a transaction using a
complex opencoded chunk allocator. This code has been there since day one
and seems to work around the lack of an efficient slab allocator.
This patch replaces it with dynamically allocated log item descriptors
from a dedicated slab pool, linked to the transaction by a linked list.
This allows to greatly simplify the log item descriptor tracking to the
point where it's just a couple hundred lines in xfs_trans.c instead of
a separate file. The external API has also been simplified while we're
at it - the xfs_trans_add_item and xfs_trans_del_item functions to add/
delete items from a transaction have been simplified to the bare minium,
and the xfs_trans_find_item function is replaced with a direct dereference
of the li_desc field. All debug code walking the list of log items in
a transaction is down to a simple list_for_each_entry.
Note that we could easily use a singly linked list here instead of the
double linked list from list.h as the fastpath only does deletion from
sequential traversal. But given that we don't have one available as
a library function yet I use the list.h functions for simplicity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Dmapi support was never merged upstream, but we still have a lot of hooks
bloating XFS for it, all over the fast pathes of the filesystem.
This patch drops over 700 lines of dmapi overhead. If we'll ever get HSM
support in mainline at least the namespace events can be done much saner
in the VFS instead of the individual filesystem, so it's not like this
is much help for future work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Instead of having small helper functions calling big macros do the
calculations for the log reservations directly in the functions.
These are mostly 1:1 from the macros execept that the macros kept
the quota calculations in their callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The delayed logging code only changes in-memory structures and as
such can be enabled and disabled with a mount option. Add the mount
option and emit a warning that this is an experimental feature that
should not be used in production yet.
We also need infrastructure to track committed items that have not
yet been written to the log. This is what the Committed Item List
(CIL) is for.
The log item also needs to be extended to track the current log
vector, the associated memory buffer and it's location in the Commit
Item List. Extend the log item and log vector structures to enable
this tracking.
To maintain the current log format for transactions with delayed
logging, we need to introduce a checkpoint transaction and a context
for tracking each checkpoint from initiation to transaction
completion. This includes adding a log ticket for tracking space
log required/used by the context checkpoint.
To track all the changes we need an io vector array per log item,
rather than a single array for the entire transaction. Using the new
log vector structure for this requires two passes - the first to
allocate the log vector structures and chain them together, and the
second to fill them out. This log vector chain can then be passed
to the CIL for formatting, pinning and insertion into the CIL.
Formatting of the log vector chain is relatively simple - it's just
a loop over the iovecs on each log vector, but it is made slightly
more complex because we re-write the iovec after the copy to point
back at the memory buffer we just copied into.
This code also needs to pin log items. If the log item is not
already tracked in this checkpoint context, then it needs to be
pinned. Otherwise it is already pinned and we don't need to pin it
again.
The only other complexity is calculating the amount of new log space
the formatting has consumed. This needs to be accounted to the
transaction in progress, and the accounting is made more complex
becase we need also to steal space from it for log metadata in the
checkpoint transaction. Calculate all this at insert time and update
all the tickets, counters, etc correctly.
Once we've formatted all the log items in the transaction, attach
the busy extents to the checkpoint context so the busy extents live
until checkpoint completion and can be processed at that point in
time. Transactions can then be freed at this point in time.
Now we need to issue checkpoints - we are tracking the amount of log space
used by the items in the CIL, so we can trigger background checkpoints when the
space usage gets to a certain threshold. Otherwise, checkpoints need ot be
triggered when a log synchronisation point is reached - a log force event.
Because the log write code already handles chained log vectors, writing the
transaction is trivial, too. Construct a transaction header, add it
to the head of the chain and write it into the log, then issue a
commit record write. Then we can release the checkpoint log ticket
and attach the context to the log buffer so it can be called during
Io completion to complete the checkpoint.
We also need to allow for synchronising multiple in-flight
checkpoints. This is needed for two things - the first is to ensure
that checkpoint commit records appear in the log in the correct
sequence order (so they are replayed in the correct order). The
second is so that xfs_log_force_lsn() operates correctly and only
flushes and/or waits for the specific sequence it was provided with.
To do this we need a wait variable and a list tracking the
checkpoint commits in progress. We can walk this list and wait for
the checkpoints to change state or complete easily, an this provides
the necessary synchronisation for correct operation in both cases.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
When we free a metadata extent, we record it in the per-AG busy
extent array so that it is not re-used before the freeing
transaction hits the disk. This array is fixed size, so when it
overflows we make further allocation transactions synchronous
because we cannot track more freed extents until those transactions
hit the disk and are completed. Under heavy mixed allocation and
freeing workloads with large log buffers, we can overflow this array
quite easily.
Further, the array is sparsely populated, which means that inserts
need to search for a free slot, and array searches often have to
search many more slots that are actually used to check all the
busy extents. Quite inefficient, really.
To enable this aspect of extent freeing to scale better, we need
a structure that can grow dynamically. While in other areas of
XFS we have used radix trees, the extents being freed are at random
locations on disk so are better suited to being indexed by an rbtree.
So, use a per-AG rbtree indexed by block number to track busy
extents. This incures a memory allocation when marking an extent
busy, but should not occur too often in low memory situations. This
should scale to an arbitrary number of extents so should not be a
limitation for features such as in-memory aggregation of
transactions.
However, there are still situations where we can't avoid allocating
busy extents (such as allocation from the AGFL). To minimise the
overhead of such occurences, we need to avoid doing a synchronous
log force while holding the AGF locked to ensure that the previous
transactions are safely on disk before we use the extent. We can do
this by marking the transaction doing the allocation as synchronous
rather issuing a log force.
Because of the locking involved and the ordering of transactions,
the synchronous transaction provides the same guarantees as a
synchronous log force because it ensures that all the prior
transactions are already on disk when the synchronous transaction
hits the disk. i.e. it preserves the free->allocate order of the
extent correctly in recovery.
By doing this, we avoid holding the AGF locked while log writes are
in progress, hence reducing the length of time the lock is held and
therefore we increase the rate at which we can allocate and free
from the allocation group, thereby increasing overall throughput.
The only problem with this approach is that when a metadata buffer is
marked stale (e.g. a directory block is removed), then buffer remains
pinned and locked until the log goes to disk. The issue here is that
if that stale buffer is reallocated in a subsequent transaction, the
attempt to lock that buffer in the transaction will hang waiting
the log to go to disk to unlock and unpin the buffer. Hence if
someone tries to lock a pinned, stale, locked buffer we need to
push on the log to get it unlocked ASAP. Effectively we are trading
off a guaranteed log force for a much less common trigger for log
force to occur.
Ideally we should not reallocate busy extents. That is a much more
complex fix to the problem as it involves direct intervention in the
allocation btree searches in many places. This is left to a future
set of modifications.
Finally, now that we track busy extents in allocated memory, we
don't need the descriptors in the transaction structure to point to
them. We can replace the complex busy chunk infrastructure with a
simple linked list of busy extents. This allows us to remove a large
chunk of code, making the overall change a net reduction in code
size.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Now that the code has been factored, clean up all the remaining
style cruft, simplify the code and re-order functions so that it
doesn't need forward declarations.
Also move the remaining functions that require forward declarations
(xfs_trans_uncommit, xfs_trans_free) so that all the forward
declarations can be removed from the file.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The function header to xfs-trans_committed has long had this
comment:
* THIS SHOULD BE REWRITTEN TO USE xfs_trans_next_item()
To prepare for different methods of committing items, convert the
code to use xfs_trans_next_item() and factor the code into smaller,
more digestible chunks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
> +shut_us_down:
> + shutdown = XFS_FORCED_SHUTDOWN(mp) ? EIO : 0;
> + if (!(tp->t_flags & XFS_TRANS_DIRTY) || shutdown) {
> + xfs_trans_unreserve_and_mod_sb(tp);
> + /*
This whole area in _xfs_trans_commit is still a complete mess.
So while touching this code, unravel this mess as well to make the
whole flow of the function simpler and clearer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Split the the part of xfs_trans_commit() that deals with writing the
transaction into the iclog into a separate function. This isolates the
physical commit process from the logical commit operation and makes
it easier to insert different transaction commit paths without affecting
the existing algorithm adversely.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The staleness of a object being unpinned can be directly derived
from the object itself - there is no need to extract it from the
object then pass it as a parameter into IOP_UNPIN().
This means we can kill the XFS_LID_BUF_STALE flag - it is set,
checked and cleared in the same places XFS_BLI_STALE flag in the
xfs_buf_log_item so it is now redundant and hence safe to remove.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currenly we pass opaque xfs_log_ticket_t handles instead of
struct xlog_ticket pointers, and void pointers instead of
struct xlog_in_core pointers to various log manager functions.
Instead pass properly typed pointers after adding forward
declarations for them to xfs_log.h, and adjust the touched
function prototypes to the standard XFS style while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Remove the XFS_LOG_FORCE argument which was always set, and the
XFS_LOG_URGE define, which was never used.
Split xfs_log_force into a two helpers - xfs_log_force which forces
the whole log, and xfs_log_force_lsn which forces up to the
specified LSN. The underlying implementations already were entirely
separate, as were the users.
Also re-indent the new _xfs_log_force/_xfs_log_force which
previously had a weird coding style.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
This macro only obsfucates the log item type assignments, so kill it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
When completing I/O requests we must not allow the memory allocator to
recurse into the filesystem, as we might deadlock on waiting for the
I/O completion otherwise. The only thing currently allocating normal
GFP_KERNEL memory is the allocation of the transaction structure for
the unwritten extent conversion. Add a memflags argument to
_xfs_trans_alloc to allow controlling the allocator behaviour.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Thomas Neumann <tneumann@users.sourceforge.net>
Tested-by: Thomas Neumann <tneumann@users.sourceforge.net>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
the write_super method is used for
(1) writing back the superblock periodically from pdflush
(2) called just before ->sync_fs for data integerity syncs
We don't need (1) because we have our own peridoc writeout through xfssyncd,
and we don't need (2) because xfs_fs_sync_fs performs a proper synchronous
superblock writeout after all other data and metadata has been written out.
Also remove ->s_dirt tracking as it's only used to decide when too call
->write_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.
Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.
This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.
Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.
Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:
text data bss dec hex filename
615957 2960 3848 622765 980ad fs/xfs/xfs.o
617231 3152 3848 624231 98667 fs/xfs/xfs.o.old
Fallout:
- xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
the inode locked and xfs_qm_dqattach which does the locking around it,
thus removing XFS_QMOPT_ILOCKED.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
When an I/O error occurs during an intermediate commit on a rolling
transaction, xfs_trans_commit() will free the transaction structure
and the related ticket. However, the duplicate transaction that
gets used as the transaction continues still contains a pointer
to the ticket. Hence when the duplicate transaction is cancelled
and freed, we free the ticket a second time.
Add reference counting to the ticket so that we hold an extra
reference to the ticket over the transaction commit. We drop the
extra reference once we have checked that the transaction commit
did not return an error, thus avoiding a double free on commit
error.
Credit to Nick Piggin for tripping over the problem.
SGI-PV: 989741
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32353a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Add an xfs_ail pointer to log items so that the log items can reference
the AIL directly during callbacks without needed a struct xfs_mount.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32352a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Bring the ail lock inside the struct xfs_ail. This means the AIL can be
entirely manipulated via the struct xfs_ail rather than needing both the
struct xfs_mount and the struct xfs_ail.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32350a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Move it from the attr code to the transaction code and make
the attr code call the new function.
We rolltrans is really usefull whenever we want to use rolling
transaction, should be generic, it isn't dependent on any part
of the attr code anyway.
We use this excuse to change all the:
if ((error = xfs_attr_rolltrans()))
calls into:
error = xfs_trans_roll();
if (error)
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31729a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
kmem_free() function takes (ptr, size) arguments but doesn't actually use
second one.
This patch removes size argument from all callsites.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31050a
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
remove beX_add functions and replace all uses with beX_add_cpu
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Dave Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that struct bhv_vfs doesn't have any members left we can kill it and
go directly from the super_block to the xfs_mount everywhere.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29509a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Creates a new xfs_dsb_t that is __be annotated and keeps xfs_sb_t for the
incore one. xfs_xlatesb is renamed to xfs_sb_to_disk and only handles the
incore -> disk conversion. A new helper xfs_sb_from_disk handles the other
direction and doesn't need the slightly hacky table-driven approach
because we only ever read the full sb from disk.
The handling of shared r/o filesystems has been buggy on little endian
system and fixing this required shuffling around of some code in that
area.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29477a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
With the per-cpu superblock counters, batch updates are no longer atomic
across the entire batch of changes. This is not an issue if each
individual change in the batch is applied atomically. Unfortunately, free
block count changes are not applied atomically, and they are applied in a
manner guaranteed to cause problems.
Essentially, the free block count reservation that the transaction took
initially is returned to the in core counters before a second delta takes
away what is used. because these two operations are not atomic, we can
race with another thread that can use the returned transaction reservation
before the transaction takes the space away again and we can then get
ENOSPC being reported in a spot where we don't have an ENOSPC condition,
nor should we ever see one there.
Fix it up by rolling the two deltas into the one so it can be applied
safely (i.e. atomically) to the incore counters.
SGI-PV: 964465
SGI-Modid: xfs-linux-melb:xfs-kern:28796a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
When we have a couple of hundred transactions on the fly at once, they all
typically modify the on disk superblock in some way.
create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify
free block counts.
When these counts are modified in a transaction, they must eventually lock
the superblock buffer and apply the mods. The buffer then remains locked
until the transaction is committed into the incore log buffer. The result
of this is that with enough transactions on the fly the incore superblock
buffer becomes a bottleneck.
The result of contention on the incore superblock buffer is that
transaction rates fall - the more pressure that is put on the superblock
buffer, the slower things go.
The key to removing the contention is to not require the superblock fields
in question to be locked. We do that by not marking the superblock dirty
in the transaction. IOWs, we modify the incore superblock but do not
modify the cached superblock buffer. In short, we do not log superblock
modifications to critical fields in the superblock on every transaction.
In fact we only do it just before we write the superblock to disk every
sync period or just before unmount.
This creates an interesting problem - if we don't log or write out the
fields in every transaction, then how do the values get recovered after a
crash? the answer is simple - we keep enough duplicate, logged information
in other structures that we can reconstruct the correct count after log
recovery has been performed.
It is the AGF and AGI structures that contain the duplicate information;
after recovery, we walk every AGI and AGF and sum their individual
counters to get the correct value, and we do a transaction into the log to
correct them. An optimisation of this is that if we have a clean unmount
record, we know the value in the superblock is correct, so we can avoid
the summation walk under normal conditions and so mount/recovery times do
not change under normal operation.
One wrinkle that was discovered during development was that the blocks
used in the freespace btrees are never accounted for in the AGF counters.
This was once a valid optimisation to make; when the filesystem is full,
the free space btrees are empty and consume no space. Hence when it
matters, the "accounting" is correct. But that means the when we do the
AGF summations, we would not have a correct count and xfs_check would
complain. Hence a new counter was added to track the number of blocks used
by the free space btrees. This is an *on-disk format change*.
As a result of this, lazy superblock counters are a mkfs option and at the
moment on linux there is no way to convert an old filesystem. This is
possible - xfs_db can be used to twiddle the right bits and then
xfs_repair will do the format conversion for you. Similarly, you can
convert backwards as well. At some point we'll add functionality to
xfs_admin to do the bit twiddling easily....
SGI-PV: 964999
SGI-Modid: xfs-linux-melb:xfs-kern:28652a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The free block modification code has a 32bit interface, limiting the size
the filesystem can be grown even on 64 bit machines. On 32 bit machines,
there are other 32bit variables in transaction structures and interfaces
that need to be expanded to allow this to work.
SGI-PV: 959978
SGI-Modid: xfs-linux-melb:xfs-kern:27894a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Christoph Hellwig